FineDigital FineDrive 400 Operation & User’s Manual

Text of FineDigital FineDrive 400 User Guide:

• 27 Using a City Center as a destination Sometimes you may want to use the unit to get to a city, but not to a specific location within the city. To do this you select a city Center as a destination. As with selecting a Point of Interest, there are several methods of selecting a city center: two for nearby city centers and one for all city centers in a region. TO SELECT

• FineDigital FineDrive 400, 3 Contents CAUTION .......................................................................................................................................................2 CONTENTS....................................................................................................................................................3 NAVIGATION.................................................................................................................................................4 G ETTING STARTED..........................................................................................

• FineDigital FineDrive 400, 33 Tap Destination. The Destination Options screen appears. Tap Stopover. The Set Stopover screen appears. Tap the X in the top right corner. A confirmation message appears asking if you want to continue to your final destination. Tap Yes. The map appears and navigation continues.

• FineDigital FineDrive 400, 44 Appendix FCC Compliance FCC Notice "Declaration of Conformity" This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

• FineDigital FineDrive 400, 34 Managing your favorites list You can edit the destination you add to your favorites list to give them descriptive names. You can also remove destinations from your favorites list. TO MANAGE YOUR FAVORITES LIST Tap Menu on the map screen. The main menu appears. Tap Destination. The Set Destination screen appears. Tap Favorites. The Favorites screen appears. To edit a favorites: Tap on the favorite you want to edit. Eap Edit. The Edit Favorites screen appears. Enter a descriptive name for this favorite Tap OK when you are done.

• FineDigital FineDrive 400, 17 Tap Street First. The Enter Street Name screen appears. Tap the letters to enter the name of the street. Tap OK when you have selected the street. The Enter 2nd Street Name screen appears. Tap the letters to enter the name of the second street. Tap OK when you have selected the street. The Select Address screen appears. Select the intersection that matches the location you want to go to and tap Nav. The map appears, and the guidance directions begin. TO ENTER AN INTERSECTION AS A DESTINATION USING CITY FIRST Tap Menu on the map screen. The main

• FineDigital FineDrive 400, 8 2. Tap information. The information screen appears, giving you block information about the location, including latitude and longitude. TO VIEW POI INFORMATION 1. To view information about POI on the map, press firmly on the icon on the map. The POI(s) screen appears. 2. Tap information. The information screen appears, giving you block information about the location, including latitude and longitude.

• FineDigital FineDrive 400, 15 Tap the number to enter the house number. Tap OK when you have finished. The Select Address screen appears. Select the address that matches the location you want to go to and tap Nav. The map appears, and the guidance directions begin.

• 23 Tap a subcategory. The POI Options screen appears. To select a POI from an alphabetical list: Tap List All. The Enter POI Name. Tap OK when you have selected the POI. The POI Select screen appears. Tap Nav. The map appears, and the guidance directions begin. To select a POI by city: Tap By City. The Enter City Name screen appears. Tap the letters to ent

• FineDigital FineDrive 400, 38 ORIENTATION There are two orientation settings. Heading turns the map as you drive so that you are always moving toward the top of the screen. North keeps the map oriented with North at the top of the map, like a traditional paper map. GUIDANCE There are two guidance settings, which control whether or not the maneuver detail screen appears when you near your next maneuver. If you use the auto setting, the maneuver detail screen appears. DAY/NIGHT SETTING The day/night setting controls the background of the screen. If you choose auto, the unit will automatically switch to a darker version of your color scheme soon after sunset, to reduce the glare in the vehicle. You can

• FineDigital FineDrive 400, 12 Tap Address. The input Method screen appears. If you need to change the region: Tap Change. The Enter State Name screen appears. Tap the letters to enter the name of the region, or tap the name of the region. Tap OK when you have selected the region. You return to the Input Method screen. Tap Street First. The Enter Street Name screen appears. Tap the letters to enter the name of the street. Tap OK when you have selected the street. The Enter House Number screen appears.

• FineDigital FineDrive 400, 2 Caution WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLINCE TO RAIN OF MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Fine Digital makes no warranty as to the accuracy or completeness of map data in this product and disclaims any and all express, implied or statutory warranties, including any implied warranty of merchantability or fitness for a particular purpose. It is the user’s responsibility to use this product pr

• 40 Tap your Language preference: English, François, Español, or Chinese. Tap your Time Zone preference: Eastern, Central, Mountain, Pacific, Alaska or Hawaii. Tap your Daylight Saving preference: On or Off. Tap your Units preference: Mi/Ft, Mi/Yd, or KM. When you have finished choosing your options, tap OK. Copy the .JPG and .BMP files you want to use as wallpa

• FineDigital FineDrive 400, 18 Tap Intersection. The input Method screen appears. If you need to change the region: Tap Change. The Enter State Name screen appears. Tap the letters to enter the name of the region, or tap the name of the region. Tap OK when you have selected the region. You return to the Input Method screen. Tap City First. The Enter City Name screen appears. Tap the letters to enter the name of the city. Tap OK when you have selected the city. The Enter Street screen appears.

• FineDigital FineDrive 400, 41 Speed Alert You can use the speed alert feature to warn you if your vehicle is exceeding the speed limit. There are two speed alert options: auto speed alert and fixed speed alert. Auto speed alert uses the type of road to determine the probably speed limit. Fixed speed alert lets you enter a speed and will warn you if that speed is exceeded. TO SET THE SPEED ALERT Tap Menu on the map screen. The main menu appears. Tap Speed Alert. The Speed Alert screen appears. To set auto speed alert: Tap the Auto Speed Alert check box. A check mark indicates that Auto Speed Alert is

• FineDigital FineDrive 400, 7 Route list If you have set a destination, you can view a list of the maneuvers that make up your route by pressing the right side of the wheel button. Tapping an item on the list and then tapping Map will display the maneuver detail screen for that maneuver. Location and POI information You can find location information about any point on the map by pressing firmly on the map. A screen appears giving you the opportunity to set the location as the Start or the Destination, save the location to your Favorites list, or view information. From the information screen you

• 32 Once you have set a destination you can add a stopover. Adding a stopover does not cancel your original destination. TO CREATE A STOPOVER Tap Menu on the map screen. The main menu appears. Tap Destination. The Destination Options screen appears. Tap Stopover. The Set Stopover screen appears. Set your stopover destination using any of the methods

• FineDigital FineDrive 400, 26 Tap Menu on the map screen. The main menu appears. Tap Destination. The Set Destination screen appears. Tap Recent. The Recent screen appears. Tap on Recent destination you want to go to and tap Nav. The map appears, and the guidance directions begin.

• FineDigital FineDrive 400, 19 Tap the letters to enter the name of the street. Tap OK when you have selected the street. The Enter 2nd Street Name screen appears. Tap the letters to enter the name of the second street. Tap OK when you have selected the street. The Select Address screen appears. Select the intersection that matches the location you want to go to and tap Nav. The map appears, and the guidance directions begin.

• 42 TO CHANGE THE VOLUME Tap MENU and then Settings menu appears. Tap Volume. The Volume screen appears. Tap on the volume setting you want, or tap on the Vol – or Vol + buttons. To test the volume, tap Test. To save your changes, tap OK. The Volume screen closes.

• FineDigital FineDrive 400, 9 Planning your route You can set a destination with the unit many different ways. Once you have set a destination, you can add a detour or a stopover. The unit also offers an Itinerary feature, where you can enter up to 50 destinations and use the Itinerary screen to move the addresses into any order like you. Setting the home address TO ENTER YOUR HOME ADDRESS: Tap Menu. The main menu appears Tap Shortcut button on the screen Tap Set Home button next to the Go Home button.

• FineDigital FineDrive 400, 4 Navigation Getting Started To start the unit Press the POWER button. The screen will display the Home Screen. To start Navigation, tap the Navigation icon. Tap the OK button after you have read and agreed to the warning. The map screen appears and you are ready to set your first destination. Getting a GPS signal To use the unit to guide you to a destination, the unit must be receiving signals. GPS signals can be obstructed by ceilings, trees and nearby tall buildings. Signals can also be obstructed by the root of your vehicle. For best results, posit

• FineDigital FineDrive 400, 11 Setting a single destination You can set your destination the following ways: z Address z Intersection z Point of Interest (POI) z Favorites z Recent z City Center When you have found your destination, you have several options: Nav calculates the route from your current location (or the location you set as a starting point) to the destination. Fav adds the destination to your Favorites list. Your Favorites list is a list of locations that you can add destinations to. You can also enter a name for a destination and delete destinations from the list. Map displays the location on the panning map without calculating

Related Products and Documents (GPS):

Comparable Devices:

Similar Resources:

• Shenzhen v-sun Electronics TLT-1C (40 pages) InstructionInstructionInstructionInstruction ManualManualManualManual V3.0V3.0V3.0V3.0 forforforforTLT-1CTLT-1CTLT-1CTLT-1CGPS/GSMGPS/GSMGPS/GSMGPS/GSM On-VehicleOn-VehicleOn-VehicleOn-Vehicle TrackerTrackerTrackerTracker1111////40404040TLT-1CTLT-1CTLT-1CTLT-1CGPS/GSMGPS/GSMGPS/GSMGPS/GSM CarCarCarCar TrackerTrackerTrackerTrackerInstructionInstructionInstruc …

• GRAPHTEC GL820-UM-851 (22 pages) Checking the Outer CasingChecking the AccessoriesSetting and Checking the AC Line FrequencyAfter unpacking, check the GL820's Exterior to make sure that there are crack or other damage before use.Set the AC line frequency in the “OTHR” menu. This setting (50 or 60 Hz) affects the noise reduction performance of the device.o Quick Start Guide : 1o CD- …

• Argent Data Systems OpenTracker USB (43 pages) Argent Data Systems OpenTracker USB User’s Manual Revised 2-25-2013 Argent Data Systems, Inc. PO Box 579 Santa Maria, CA 93456-0579 USA (800) 274-4076 / +1 805 619-4515 Fax (866) 302-6890 www.argentdata.com Copyright © 2007-2013 Argent Data Systems All Rights Reserved APRS® is a registered trademark of Bob Bruninga, WB4APR …

• VYPIN reSeal VP820 (9 pages) reSeal VP820 Set Up and Use Instructions 28-0001 Rev 6 User Manual reSeal/safeTstrap VP820 June 2018 …

• Lowrance 3500C (7 pages) 13500Installation and OperationInstructionsThe 3500 is a high-performance digital sonar. It works only off the bottom signaland it's operation is completely automatic. There are no sensitivity or noise con-trols. All of this is made possible by the computer built inside. This unit fits in astandard 2 1/8" (54 mm) hole used by most marine equipment …

• Rikaline CF GPS GPS-6020 (11 pages) Rikaline GPS-6020 CF GPS Rikaline International Corp. 10F, 64, Kang-Ding Road, Taipei 108, Taiwan, R.O.C. Phone: +886-2-2370-4688 Fax: +886-2-2370-4686 E-Mail: [email protected] Web: www.rikaline.com.tw All Right Reserved User’s Guide High Accuracy --- 3 Meters (50%) or 5 Meters (90%) Low Power -------- 29m …

Comments, Questions and Opinions: