Toshiba TLP TLP-X2000 Owner's Manual

Text of Toshiba TLP TLP-X2000 User Guide:

• 59 Others 58 Specifications (Continued) ■ CONTROL terminal ● Pin assignment 7 68 5 4 3 2 1 Signal Name RXD CTS DSR GND RTS N.C TXD GND Pin No. 1 2 3 4 5 6 7 8 Description Receiving data Consent to send Data set ready Signal ground Request to send No connection Sending data Signal ground Mini DIN 8 pin connector ● Interface format 1 Communication method RS-232C, 9600bps, No Parity,

• Toshiba TLP TLP-X2000, Before Using 54 5. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 6. Water and Moisture Do not use this product near water. - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like. 7. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft cloth for cleaning. 8. Power-Cord

• Toshiba TLP TLP-X2000, 25 Operations 24 Turning the power on and off Operations ■ Connecting the power cord 1 Insert the power cord connector into the AC IN socket of the projector. 2 Insert the power cord plug into a wall or other power outlet. The ON/STANDBY indicator will change to orange, indicating standby mode. ■ Removing the lens cover Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat. ■ Turning the power on Press the ON/STANDBY button. When the beep sound is [On], the projector beeps, the power turns on, and the ON/STANDBY indicator lights in green. After a moment, the start-up screen appears. CAUTION • Do not look

• Toshiba TLP TLP-X2000, 37 Operations 36 ■ The image adjustment menu Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, it indicates that you cannot select for the current input.) Item Description Computer Y/PB/PR Video S-video Camera (XC2000) Contrast Adjust the image contrast. Yes Yes Yes Yes Yes Lower Higher Brightness Adjust the brightness of the image. Yes Yes Yes Yes Yes Darker Brighter Color Adjust the color of the image. No Yes Yes Yes No Lighter Deeper Shar

• Toshiba TLP TLP-X2000, Before Using 76 IMPORTANT SAFETY INSTRUCTIONS (Continued) 15. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. S3125A 16. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged. b) If liquid has been spilled, or object

• 53 Maintenance 52 WARNING • Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership . Attempting to clean/replace the lamp at a high site by yourself may cause you to fall down, thus resulting in injury. ■ Lens cleaning • Clean the lens with a commercially available blower and/or lens cleaner. • The lens is easily scratched, so

• Toshiba TLP TLP-X2000, Before Using 10 11 Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the finish. If cleaning with a chemically saturated cloth, be sure to follow the product's precautions. LCD Panel • If the air filter is stained and is clogged up, the main unit inner temperature rises. As a result, the life of the LCD is shortened and a malfunction may also occur. Clean the air filter from time to time and replace it regularly. It is recommended that this replacement be done at the time of replacing a lamp. (Ask a dea

• 2120 Preparations Operating a computer using the remote control A computer can be operated using the projector’s remote control. This function is available on any computer with the Windows ® 98/98SE, Windows ® Me, Windows ® 2000, or Win- dows ® XP OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for

• Toshiba TLP TLP-X2000, 27 Operations 26 1 Turn on the power. Tu rn on the power by following the instructions in “Turning the power on” p.25 . 2 Select the language and the lamp power (When using the first time). When the projector is used for the first time after purchase, the start menu for lan- guage (to display the menus and messages on the screen) and lamp power selection and configuration is displayed in English. (If the screen is out of focus, adjust it according to the step 6 .) q Use the or button to select the desired language and press the button. Message for setup confirmation is displayed in a selected language. Then, the menu for lamp power selection and configuration is displaye

• Toshiba TLP TLP-X2000, 29 Operations 28 ■ Using auto setting (Only for input from computer) This function sets up the projector to the optimum state such as sampling phase, frequency, screen position, and clamp for each type of the input signal by using simple operations. Press the remote control’s AUTO SET button. For computer input, the icon will appear during processing. You can set as well by selecting [Auto setting] in the Image adjustment menu p.37 . Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.57 , p.58 . • If auto setting fails adjustment, adjust manually with [P

• Toshiba TLP TLP-X2000, 1918 Preparations Names of the terminals on the rear panel (1) (2) (3) (4) (6) (8) (9) (5) (7) COMPUTER 2 IN (Y/P B /P R 2) /MONITOR OUT Names of each part on the document camara (models with a document camera) Name : Main Function Camera (1) LED illumination : The illumination LED for referring documents. p.46 (2) Focus ring : Adjusts the focus. p.47 (3) Camera lens : The camera lens of the document camera. (4) Camera arm : Adjusts the camera angle. p.45 (5) Infrared remote sensor : Senses

• Toshiba TLP TLP-X2000, 41 Operations 40 Notes •You can register a logo from computer input only. • The area that can be registered is 512 × 384 dots at the center of the screen. To register a company logo, prepare the image within the limit. • Only one logo can be registered. When a new image is registered, the old one is erased. • The time needed to register or display the image varies depending on the data size. • If you use this function on commercial video software, broadcast or cable- broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. <Display style> Select the size of the registered

• Toshiba TLP TLP-X2000, 48 49 Maintenance The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure to fully understand the following characteristics of the lamp and handle it with extreme care. • The lamp may burst with a loud noise due to impact or deterioration, or fail to light at the expiration of its life. •How long it takes before the lamp bursts or the life expires may vary greatly by lamp. Some may burst shortly after first use. • Burst is likely to happen if the lamp is used afte

• Toshiba TLP TLP-X2000, 43 Operations 42 ■ The default setting menu This menu shows placement status and other settings. Default setting 1 menu DescriptionItem Set the time to wait for the power to be turned off after the last operation is made with no input signal. Set whether the input with signals is only selected or not. Beep when operation is made. Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto). Sets the lamp power. No signal power off Auto input search Beep Power on Lamp power Manu

• Toshiba TLP TLP-X2000, 55 Others 54 If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.54 as well. If This Happens Check No power Power goes out during use No picture No audio Picture not displayed correctly Picture blurred Part of picture out of focus Image is dark Colors too light Bad shading Control panel key doesn’t work Remote control doesn’t work Before calling service personnel • Is the power cord plugged in? Is it connected to the projector? • Is the lamp cover attached proper

• Toshiba TLP TLP-X2000, 51 Maintenance 50 5 Mount the new lamp. Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the three lamp locking screws. 6 Replace the lamp cover. Align the cover, and press it in, then tighten the screws loosened in step 3 until the lamp cover is no longer loose. 7 Reset the lamp time. See the lamp’s manual for instructions on resetting the lamp time. Notes and Precautions • The [Lamp time] item in the Status display menu indicates the time of lamp use (as a rough guide) p.44 • Please replace the lamp after 2000 hours of use with [Lamp power] in the Default setting 1 m

• Toshiba TLP TLP-X2000, 39 Operations 38 ■ The display setting menu Use this menu to set screen display-related items. (The items in gray color cannot be set with the current input selection.) Language Up/down shift Background Icon Blackboard mode Start-up screen User logo (Full): Display with 1024 × 768 dot resolution (Thru): Display with sampling resolution (for computer input only) (Wide): Wide-screen display Lets the projected image shift vertically when the screen size setting is wide display (within the range of 1024 × 768). When projecting on a non-screen surface, se

• Toshiba TLP TLP-X2000, 33 Operations 32 ■ Setting the password How to change password The default password is 0000. 1 Select [Password] in the Default setting 2 menu and press the or button. 2 Select [Password registration] in the password registration, setting menu, and press the button. The password entry screen is displayed. 3 Enter the current password (4-digit number). • Enter a 4-digit number for the password using numeric keys of the remote control. • Enter [0000] (4 zeros) for the first change. • The password is not displayed. Instead it appears as [****]. 4 Enter a new password (4-digit number). 5 Re-enter the same password for confirmation. Note • Please do not forget y

More Instructions:

	Toshiba TLP TLP-X2000 Specifications 15-10-2022 1	DOWNLOAD
	Toshiba TLP TLP-X2000 Brochure & specs 23-09-2023 2	DOWNLOAD

Related Products and Documents (Projector):

Comparable Devices:

Similar Resources:

• Canon WUX10 - REALiS WUXGA LCOS Projector (144 pages) Table of ContentsSafety InstructionsBefore UseProjecting an Image Useful Functions Available During a PresentationSetting Up Functions from MenusConnecting the Projector to NetworkAppendixIndexENGMULTIMEDIA PROJECTORUser’s Manual …

• Panasonic PTF300NTU - LCD PROJECTOR (72 pages) ENGLISH Operating InstructionsLCD Projector Model No. PT-F300NTUPT-F300UBefore operating this product, please read the instructions carefully and save this manual for future use.TQBJ0279-1Commercial Use(PT-F300NTU) …

• Mitsubishi FL7000LU (17 pages) EN-1LAN Control Utility User Manual (for FL7000U/FL7000LU)ContentsPreparation/SetUp .........................................................................2Preparation before using the network function ...........................................2 Connection ..................................................................................................3I …

• NEC LCDMT850 (8 pages) Visual Systems Division Technical Bulletin MT850 Installation Data with Standard Zoom Lens (1.8 – 2.2:1) Rev. 1.6 Page 1 Contents Product Description, Lens Specs, Notes and Formulas Page 1 Projection Distances and Screen Sizes Ceiling Mount …

• Mitsubishi Electric SD420U (84 pages) CAUTIONBefore servicing this chassis, it is important that the service person read the “SAFETY PRECAUTIONS” and “PRODUCTSAFETY NOTICE” in this service manual.Pb Solder, Pb Joints, Pb PCAThis product uses lead-free solderon the circuit boards. For repairingcircuit boards, see "Precautions forresoldering" in this Service Manual.These mode …

• ViewSonic PJ556D (40 pages) PJ556DDLP ProjectorViewSonic®Model No. : VS11664- User Guide- Guide de l’utilisateur- Bedienungsanleitung- Guía del usuario- Guida dell’utente- Guia do usuário- Användarhandbok- Käyttöopas-Pyководствопользователя- 使用手冊 (繁體)- 使用手冊(简体) …

Comments, Questions and Opinions: