Toshiba RBC-AX31U(W)-UL Owner's Manual

Text of Toshiba RBC-AX31U(W)-UL User Guide:

• Toshiba RBC-AX31U(W)-UL, REMOTE CONTROLLER FOR AIR CONDITIONER (SPLIT TYPE) Owner’s Manual Owner’s Manual Remote controller for air conditioner (Split type) 1 English Manuel du proprietaire Télécommande pour climatiseur (Type split) 17 Français Remote Controller Model name: Wireless remote controller kit RBC-AX31U(W)-UL Generic model name Wireless remote controller and signal receiving unit RBC-AX31U(W)-UL WX-TA01UES (Wireless remote controller model name) Wireless remote controller (WX-TA01UES) Signal receiving unit EH99677301_2L_remo_OM_UL_A5_Print.book Page 1 Thursday, October 8, 2009 3:14 PM

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –1– Contents 1 PRECAUTIONS FOR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 CORRECT USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 TIMER OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 HOW TO ADJUST AIR DIRECTION . . . . . . . . . . . . . . . . . . . . . . 10 6 SLIDE SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 7 HOW TO INSERT BATTERIES . . . . . . . . . . . . . . . . . . . . .

• Wireless remote controller kit Owner’s Manual –2– EN 1 PRECAUTIONS FOR SAFETY WARNING WARNINGS ABOUT INSTALLATION • Make sure to ask the qualified installation professional in electric work to install the remote controller. If the remote controller is inappropriate installed by yourself, it may cause electric shock or fire, etc. • Make sure to install the air condi

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –3– 2 PART NAMES AND FUNCTIONS  Remote Controller (WX-TA01UES) • Up to 8 indoor units in a group can be controlled by one remote controller. (See page 14) Illustration of LCD shown below is for explanation. It may differ from the actual LCD. 1 Transmitting unit 2 ON/OFF button Starts and stops the air conditioner alternately. 3 Mode button Selects desired operation mode. 4 Fan speed button 5 Timer set button Used to setup the timer. (See page 9) 6 Filter button No function 7 ACL button Used after batteries are replaced or the slide switch is switched. (See page 11) 8 Slide switch (See page 11) 9 Battery compartment (See page 11) 10

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –4– EN 18 Sensor button Selects the temperature sensor of the remote controller. The temperature sensor of the indoor unit is selected by default. While the indoor unit temperature sensor is selected, is displayed on the display.  Signal Receiving Unit • The signal receiving unit is attached to the indoor unit. • Hereinafter, all remote controller button names are indicated with respective symbols displayed on the remote controller. Example: ON/OFF button → 1 Emergency

• Wireless remote controller kit Owner’s Manual –5–  Display section All indicators are shown in the right and the lower figures for the explanation. Only selected contents are display in actual operation. 1 Transmitting indication Displayed while operating the switches of the remote controller. 2 Operation mode The selected operation mode is displayed. 3 Fan s

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –6– EN  Operation section Push each button to select a desired operation. • The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing only. 1 Mode button Selects the desired operation mode. 2 Fan speed button Selects a fan speed. 3 Timer set button Used to setup the timer. (See page 9) 4 ACL button Use this button after battery exchange. 5 Setup temperature button Adjusts the set point. Set the desired set point by pushing or . 6 ON/OFF button When the butto

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –7– 3 CORRECT USAGE  Auto , Heat , Dry , Cool , Fan Power Turn on the power supply switch 12 hours before starting operation. * The remote controller is disabled for approx. 1 minute after the indoor unit has been powered on. This is normal. (The signal from the remote controller is received, but the receive data is discarded.) 1 Push (ON/OFF button). 2 Push (Mode button) to select an operation mode. • Select Auto, Heat, Dry, Cool, or Fan. 3

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –8– EN  Dry operation • Dry function may not be provided depending on the using indoor unit, even if Dry ( ) is displayed on the LCD of the remote controller. (The same to Cooling operation) • When the room temperature approaches the setup temperature, it automatically repeats running and stop operation. • In order to not return humidity to the room as possible, the mode of indoor fan changes to LOW when the operation has stopped. • The fan speed may not be adjustable depending on the indoor unit that you use or the room temperature. • The Dry mode may not be used

• Wireless remote controller kit Owner’s Manual –9– 4 TIMER OPERATION • After the timer has been set, put the remote controller at a position where signals of the remote controller can reach the signal receiving unit on the indoor unit. The timer operation signal is transmitted from the remote controller. • Set the timer while an operation mode is displayed as follows: T

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –10– EN 5 HOW TO ADJUST AIR DIRECTION • Never move the louver (air direction up/down adjusting plate) which is operated on the remote controller with hands except a case of cleaning the louver. • While the air conditioner is not working, the louver (air direction adjusting plate) is closed automatically. • During the preparation for heating, the louver is directed upward and it starts swinging after the preparation for heating is canceled though the automatic louver display on the remote controller shows swinging even during this period. To set air direction Push during operatio

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –11– 6 SLIDE SWITCH • The settings of operation mode display and air direction display vary as follows depending on the indoor unit in use. • Use a fine-tipped tool to change the switch setting. • Push the ACL button after the switch setting is changed. • Do not change setting of the slide switch because a malfunction occurs by other settings. 1 Louver display switch * Set the slide switch to “S.” Otherwise the air direction adjustment and louver display are disabled. 2 Operation mode switch • Before using the air conditioner, check that the slide switch is set as shown in this table. For details of slide switch setting,

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –12– EN 8 HOW TO HANDLE THE REMOTE CONTROLLER • Point the transmitting unit of the remote controller at the signal receiving unit of the indoor unit. When a signal is received normally, “pi” sound is heard once. (“Pi, pi” is heard only at the beginning of operation.) • The standard signal receivable distance from the signal receiving unit of the indoor unit is approx. 23' (7 m). The distance varies somewhat with the battery capacity or other conditions. • Do not put anyt

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –13– 9 HOW TO USE THE REMOTE CONTROLLER CORRECTLY • Put the remote controller within the specified distance from the signal receiving unit of the indoor unit. Failure to do so may result in malfunction. Be sure to put the remote controller in a room where the indoor unit is installed. • When pushing a button on the remote controller, point the remote controller at the signal receiving unit of the indoor unit. When the signal receiving unit has correctly received a signal, it emits a “pi” sound. • Do not put the remote controller behind a curtain or the like. 13-EN EH99677301_2L_remo_OM_UL_A5_Print.book Page 13 Thursday,

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –14– EN 10 ADDRESS When two or more indoor units controlled by the same wireless remote controller are installed in a room, a unique address can be set for each indoor unit to prevent interference. Up to 6 indoor units can be controlled independently by the remote controller by matching the address switch setting of the signal receiving unit with the address displayed on the remote controller. From the seventh indoor unit onwards, address setting is necessary from wired remote controller. The sign

• Toshiba RBC-AX31U(W)-UL, Wireless remote controller kit Owner’s Manual –15– 11 HOW TO PERFORM EMERGENCY OPERATION In the event of an emergency shown below, push emergency operationeon the signal receiving unit (inside the ceiling panel) for emergency operation. • The batteries of the remote controller have been exhausted. • The remote controller is out of order. • The remote controller has been lost. 1 Start Push emergency operation. (When the emergency operation is started at a room temperature of 75°F (24°C) or more, the air conditioner

• Wireless remote controller kit Owner’s Manual –16– EN 12 BEFORE ASKING FOR REPAIR WORK Check the following before asking for repair work. LEDs on the signal receiving unit : OFF : Blinking (at intervals of 0.5 seconds) LED color : Green : Green : Orange Check these items. If any of these problems still remains, stop the operation, turn off the power, and then notifies the dealer from

Related Products and Documents (Remote Control):

Comparable Devices:

Similar Resources:

• Ambient Technologies RCSTEBA (11 pages) 50D0112 RCSTEBA Installation & Operating Manual Rel 1.0 April 2009 Page 1 of 10 Ambient Technologies A Division Of Monessen Hearth Systems RCSTEBA Thermostatic On/Off and Blower Remote Control– 120VAC INSTALLATION AND OPERATING INSTRUCTIONS This remote control system provides a safe, reliable and user-friendly remote control for millivolt va …

• Sunricher SR-2803a (2 pages) RF Wireless Single Color/Dual Color Remote09.2803A.04459Switch between single color mode or dual color mode:Single color mode: (e.g. zone 4), press and hold down 4 then zone 4 was under single color mode. Under this model, and will not working.Dual color mode: Choose a zone(e.g. zone 4), press and hold down 4 & together about 5-10 se …

• Fusion MS-RGBRC (22 pages) ®Wireless RGB LED Remote Control Instructions............................................................................... 2Instructions pour la Télécommande sans fil RGB LED...................................................................... 5Istruzioni del Telecomando wireless RGB LED.................................................................. …

• Skytech 3301PF (14 pages) REV. 3/19/05 Page 1 of 14 3301PF INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION This SKYTECH remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliance. The system can be operated thermostatically or manually from the …

• Wow Ultra (2 pages) SMART MENU AND CATEGORY CARDS To access the Smart Menu, press the MENU button on the remote. Use the left and right arrows on the remote to browse the category cards. CHANNELS VIEW View all available channels. HDTVFind all of the HD content available to watch, including live TV, recorded TV and PPV. RECORDED TVView all of the programs you’ve recorded. …

• NEC MultiSync P551 (1 pages) AccessoriesNEC SB-L008WU DVI Daisy Chain Module for NEC Large-Screen LCD Displays Multiply your video messaging with ease. An accessory for select NEC large-screen displays, the SB-L008WU DVI daisy chain module is a cost-effective way for you to loop in and out a single digital video signal to up to nine displays. The expansion slot option eliminates the nee …

Comments, Questions and Opinions: