Manualios.com

Toshiba IK-WB70A - IP/Network Camera, PoE Operation & User’s Manual

  • IK-WB70A - IP/Network Camera, PoE Security Camera
  • maOHlab8g21MA
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 83

Toshiba IK-WB70A - IP/Network Camera, PoE Manual Online:

3.55, 2149 votes
Toshiba IK-WB70A - IP/Network Camera, PoE User Manual
Toshiba IK-WB70A - IP/Network Camera, PoE User Guide
Toshiba IK-WB70A - IP/Network Camera, PoE Online Manual

Text of Toshiba IK-WB70A - IP/Network Camera, PoE User Guide:

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 58 Installation Appendix Introduction How to Use Configuration Definitions Media name: Enter a descriptive name for the media setting. Media Type: There are three choices of media types available: Snapshot, Video Clip, and System log. Snapshot: Select to send snapshots when a trigger is activated. ■ Source: Select to take snapshots from stream 1 or stream 2. ■ Send [#] pre-event images The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Specify to

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 9 Installation Appendix Configuration Definitions Introduction How to Use Specifications AC adapter (DSA-20P-10) Power source : 100-240 VAC 50/60 Hz Rated output : 12 VDC, 1.5 A Ambient temperature guaranteed for performance : 32F to 104F (0℃ to 40℃) Storage temperature : -4F to 140F (-20℃ to 60℃) Maximum external dimensions : 1.42 x 1.85 x 2.93 inches (36 x 47 x 74.5 mm) (width x height x depth) Cord length : 72 inches (1828 mm) 㪊㪋㩷㪆㩷㪈㪍㪇

  • 66 Installation Appendix Introduction How to Use Configuration Definitions System log This section explains how to configure the Network Camera to send the system log message to a remote server and how to refer the current log message of the Network Camera. It is composed of the following two Segments: Remote Log and Current Log. Remote Log You

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 17 Installation Appendix Configuration Definitions Introduction How to Use Set up the Network Camera through Power over Ethernet (PoE) When using a PoE hub The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable. If your hub or gateway supports PoE, refer to the following illustration to connect the Network Camera to a PoE hub/gateway via an Ethernet cable. P O WE R CO LL IS IO N LI N K RE CE IVE P ART ITI ON 1 2 3 4 5 PoE hub (not supplied) power + data transmission When using a non-PoE hub

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 30 Installation Appendix Introduction How to Use Configuration Definitions Configuration Definitions (Cont.) Security Settings This section explains how to enable password protection and create multiple accounts. It contains the following three segments: Root Password, Add User and Manage User. Root Password The administrator account “root” is permanent and can not be deleted. To add more accounts, you must apply a password for the “root” account first. 1. Type the identical password in both text boxes. 2. Click Save to enable password protec

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 46 Installation Appendix Introduction How to Use Configuration Definitions Video orientation: Flip--vertically reflect the display of the live video; Mirror-- horizontally reflect the display of the live video. Select both options if the Network Camera is installed upside-down to correct the image orientation. White balance: Adjust the value for best color temperature. ■ Auto The Network Camera automatically adjusts the color temperature of light in response to different light so

  • Toshiba IK-WB70A - IP/Network Camera, PoE, For information on our latest products and peripheral devices, refer to the following Website: ■ http://www.toshibasecurity.com The above URL is subject to change without prior notice. If the URL changes, refer to the Toshiba website (http://www.toshiba.com). NETWORK CAMERA Model: IK-WB70A User's Manual 㪉㪍㩷㪆㩷㪈㪍㪇

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 65 Installation Appendix Introduction How to Use Configuration Definitions Destination: Specify a storage destination for the recorded video files. Note that the destination field is empty by default. Go to Configuration > Application > Server Settings to set a Network storage server; refer to Server Settings on page 59. Max. recording capacity: When the maximum capacity is reached, the oldest file will be overwritten by the latest one. File size for each recording: Specify the file size for each recording media. File name prefix: Enter the text that will be put in front of the �

  • 63 Installation Appendix Introduction How to Use Configuration Definitions ■ System boot Select this option to allow the Network Camera to trigger when the power of Network Camera is disconnected. Event Schedule: The effective period in which the event stays active. Specify the effective period for the event. ■ Select the days on weekly basis. ■ Select the time for

  • 5 Installation Appendix Configuration Definitions Introduction How to Use CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous vo

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 39 Installation Appendix Introduction How to Use Configuration Definitions To access the Network Camera within a LAN, both HTTP port and secondary HTTP port can be used to access the Network Camera. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera's IP address. In a LAN http://192.168.4.160 or http://192.168.4.160 : 8080 NOTE To use HTTP authentication, make sure that there is set a password for the Network ● Camera first; refer to Security Settings on page 30 for details. HTTPS By default, the

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 38 Installation Appendix Introduction How to Use Configuration Definitions Configuration Definitions (Cont.) How does UPnP ● TM work? UPnP TM networking technology provides automatic IP configuration and dynamic discovery of devices added to a network. Services and capabilities offered by networked devices, such as printing and file sharing, are available among each other without bothersome network configuration. In the case of Network Cameras, you will see Network Camera shortcuts at My Network Places. Enabling UPnP port forwarding allows the Network Camera to open secondary HTTP ● port on the gateway, not HTTP port 80, meaning that

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 71 Installation Introduction How to Use Confi guration Defi nitions Appendix Troubleshooting Status LED The LED indicates the status of the Network Camera. Status LED Description Blinking red (two short, one long) 1. Power is being supplied to the Network Camera. 2. Restore, or reboot the Network Camera. Reboot and restore Reset button Status LED There is a reset button on the inner side of the Network Camera. It is used to reboot the Network Camera or restore the Network Camera to factory default. Sometimes rebooting the Network Camera could set the Network Camera back to normal state. If the problems r

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 45 Installation Appendix Introduction How to Use Configuration Definitions Audio and video This section explains how to cofigure audio and video performances of the Network Camera. It contains the following two segments: Video settings and Audio settings. Video settings Video title: Enter a name that will be displayed on the title bar of the live video. IK-WB70A(TCP-AV) Color: Select to display color or black/white video streams. Power line frequency: Set the power line frequency to match the local electricity settings to eliminate image flickering associated with fluorescent lights. Note that after the power line frequency is changed, it is required to disconnec

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 48 Installation Appendix Introduction How to Use Configuration Definitions Exposure level: You can manually set the Exposure level from 1 to 8. The default value is 4. AGC (Auto Gain Control): You can manually set the AGC level to 2X, 4X or 8X. The default value is 4X. Enable WDR (Wide Dynamic Range): Select to enable the WDR function. This Network Camera with WDR feature can cope with very challenging lighting conditions. It is capable of capturing both of the dark part and bright part of a target and combining the differences into a scene to ge

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 6 Installation AppendixConfiguration Definitions Introduction How to Use NOTES ON USE AND INSTALLATION Do not aim the camera at the sun• Never aim the camera at the sun even with the camera power off. Do not shoot intense light• Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. Treat the camera with care• Dropping or subjecting the camera to intense vibration may cause it to malfunction. Never touch internal parts• Do not touch the internal parts of the camera other than the parts specified.

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 77 Installation Introduction How to Use Configuration Definitions Appendix 0.9 (23) 0.9 (23) 9.49 (241) 2.4 (61) 3.19 (81) 1.97 (50) 1.38 (35) Ǟ0.28 (7) Ǟ0.28 (7) Ǟ0.28 (7) Ǟ0.28 (7) R0.14 (3.5) Ǟ0.28 (7) 2.32 (59) 3.27 (83) 4.06 (103) 0.29 (7.3) Dimensions: inch (mm) 㪈㪇㪉㩷㪆㩷㪈㪍㪇

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 41 Installation Appendix Introduction How to Use Configuration Definitions RTSP Streaming Authentication: Depending on your network security requirements, the Network Camera provides three types of security settings for streaming via RTSP protocol: disable, basic and digest. If basic authentication is selected, the password is sent in plain text format; there can be potential risks of being intercepted. If digest authentication is selected, user credentials are encrypted in MD5 algorithm and thus provide better p

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 35 Installation Appendix Introduction How to Use Configuration Definitions Network This section explains how to configure wired network connection for the Network Camera. It consists the following five segments: Network Type, HTTP, Two way audio, FTP and RTSP Streaming. After completing the settings on this page, click Save to take effect. Network Type LAN Select this option when the Network Camera is deployed in a local area network (LAN) and is intended to be accessed by local computers. Get IP address automatically: Select this

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 59 Installation Appendix Introduction How to Use Configuration Definitions ■ Maximum file size Specify the maximal file size allowed. ■ File Name Prefix Enter the text for the file name. For example: System log: Select to send a system log when a trigger is activated. When completed, click Save to take effect and then click Close to quit this page. The new media name will appear in the media drop-down list on the Application page as below. To remove a media setting from the list, select a media name from the drop-down list and then click Delete. Only when the media setting is not being applied to an event setting‚

  • 80 Installation Introduction How to Use Configuration Definitions Appendix You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 55 Installation Appendix Introduction How to Use Configuration Definitions Preset Position Click Preset Position to open the Preset Position page. In this page, you can set the preset position for the Network Camera. A total of 20 preset positions can be configured. IK-WB70A(TCP-AV) Follow the steps below to set preset positions: 1. Adjust the Network Camera to a desired position with the buttons on the right side of the window. 2. In the Preset position name t

  • Toshiba IK-WB70A - IP/Network Camera, PoE, 70 Installation Appendix Introduction How to Use Configuration Definitions The upgrade is successful as you see "Reboot system now!! This connection will close". After that, re-access the Network Camera. The following message is displayed when the upgrade is succeeded. The following message is displayed when you have selected an incorrect firmware file. Starting firmware upgrade... Do not power down the server during the upgrade. The server will restart automatically after t

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 LG CM1560 Simple manual lg/cm1560-EF4.pdf 17 Sep 2022 4
2 Bose AmPlus 100 Owner's manual bose/amplus-100-L92.pdf 13 Aug 2022 10 1.4 Mb
3 Lorex L14Q684C Network configuration manual lorex/l14q684c-AFL.pdf 13 Mar 2024 12
4 Dell 1355CN Quick installation manual dell/1355cn-WKH.pdf 06 Oct 2023 2 5.08 Mb
5 Pantech UML290 Operation & user’s manual pantech/uml290-7OQ.pdf 18 Sep 2022 16
6 Frye FONIX 6500-CX Workbook frye/fonix-6500-cx-295.pdf 28 Oct 2022 63

Similar Resources:

  • Avtech

    AVT583

    (14 pages)
    702z t583_V0.9 Speed Dome Camera User Manual The product image shown above may differ from the actual product. Please use this camera with a DVR which supports HD video recording. Please read the instructions thoroughly before using the product. CCAAUUTTIIOONN RRIISSKK OOFF EELLEECCTTRRIICC SSHHOOCCKK CCAAUUTTIIOONN:: To reduce the risk of elect …
  • Sygonix

    SY-3181234

    (44 pages)
    Bedienungsanleitung4in1 AHD 1080p IR-ArrayÜberwachungskamera 2,8 - 12 mmBest.-Nr. Seite 2 - 11Operating instructions4in1 AHD 1080p IR array2.8 - 12 mm surveillance cameraItem No. Page 12 - 21 Mode d’emploiCaméra de surveillande LED 4-en-1 1080p 2,8 - 12 mmN° de commande Page 22 - 31Gebruiksaanwijzing4-in-1 AHD 1080p IR-ArrayBewakingscamera, 2,8 - …
  • Samsung

    SID-53

    (2 pages)
    P/No. : Z6806-0890-01D VAN 08. 12www.samsungtechwin.comwww.samsungcctv.com• SAMSUNG TECHWIN CO.,LTD.145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, KoreaTEL : +82-31-740-8151~8 FAX : +82-31-740-8145• SAMSUNG OPTO-ELECTRONICS UK,LTD.Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey Surrey KT16 OPSTEL : +4 …
  • Axis

    Q6034-E

    (2 pages)
    DATASHEETFor the highest video quality and performance, AXIS Q6034-E PTZ Dome Camera is the choice. Designed for the most demanding applications, the outdoor-ready PTZ dome provides HDTV coverage of large areas, great details when zooming in, and high-speed pan/tilt performance.AXIS Q6034-E PTZ Dome Network CameraOutdoor-ready for high-speed HDTV …
  • Samsung

    SID-370

    (25 pages)
    Thank you for purchasing a SAMSUNG Dome CAMERA.Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.High Resolution 37X Zoom Color Dome Camera SID-370 User’s ManualENGLISH …
  • GeoVision

    GV-EBD4700

    (80 pages)
    Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.User's Manual GV-EBD4700 IR Eyeball IP DomeEBDV10-A-EN …

Comments, Questions and Opinions: