Manualios.com

Samsung ML-5000A Setup Manual

Samsung ML-5000A Manual Online:

4.4, 1373 votes
Samsung ML-5000A User Manual
Samsung ML-5000A User Guide
Samsung ML-5000A Online Manual

Text of Samsung ML-5000A User Guide:

  • Samsung ML-5000A, Control Locations and Functions Front View 4 Set Up Automatic Paper Feeder Holds 150 sheets of paper. Paper Guides Adjust to the width of paper. Face-down Stacker Holds printed documents. If printed on plain paper, a maximum of 100 sheets can be held. Stacker Extender Supports paper stacked in the paper output bin. Face-up Stacker Holds a single sheet of special media (transparency, label, envelope, and heavy weight paper) with print side facing up. Operator Panel Tray Extender Supports paper stacked in t

  • Samsung ML-5000A, 12 Set Up 2. Before loading the paper, flex the sheets back and forth to loosen them, then fan them. Tap the edges on a table top to straighten them. Doing this before you load paper helps prevent paper jams. DonÕt load too much. This feeder holds up to 150 sheets. 3. Insert the paper in the paper feeder. If the paper has a preferred print side, place the print side facing you. If you use letterhead paper, load the paper with the letter-head edge down and facing you. Loading a Stack of Paper For best results, use high quality 75g/m 2 (20 lb) xerographic paper. 1. Pull the extender on the automatic paper feeder up, until it

  • Samsung ML-5000A, 13 Set Up 5. Pull up the extender on the face-down stacker. The face-down stacker can hold up to 100 printed pages. 4. Adjust the paper guides to the width of the paper. 02-Printing 7/16/99 6:30 PM Page 3

  • 14 Set Up 6. ML-5000A users may want to print a self test to check that the printer is working properly. A self test shows current printer configuration. Make sure that the READY light is on. Press and hold the button for about 3 seconds. All the indicators blink. Release the button when each indicator starts to blink in turn. Wait until a self test page prints. ERROR PAPER READY 02-Printing

  • Samsung ML-5000A, 15 Set Up Installing Printer Driver Windows 95/98/NT4.0 Installation 1. Turn on the computer and start Windows. If Windows 95/98 recognizes the new printer,go to the section ÒWindows 95/98 Plug and PlayÓ on page 16. 2.Insert the setup CD-ROM into your CD-ROM drive. If Windows does not automatically run the CD-ROM,go to the sectionÓIf Windows Does Not Run the CD-ROMÓ on page 16. 3.Click on the icon ÒPrinter Set-upÓ to install the printer drivers. 4.Click the Item you want to install. 5.Follow the instructions on the screen. Note : WinNT and WinNTRCP item is supported un

  • 16 Set Up Windows 95/98 Plug and Play 1.At the ÔNew Hardware FoundÕ dialog box,click on the OK button. 2.Insert the setup CD-ROM into your CD-ROM drive. 3.Follow the instructions on the screen. If Windows Does Not Run the CD-ROM 1.Select RUN from the Start menu. 2.Type e:\print32.exe on the command line(Ôe:\Õ is CD-ROM drive),then click OK. 3.Follow the instructions on

  • 17 Set Up Installing DOSRCP Utility For DOS Users DOS users should install the Remote Control Panel utility to change print settings. 1. Insert the setup CD-ROM into your CD-ROM drive. 2. At the DOS prompt, type in: c:\>XCOPY e:\Driver\English\DosUtil\*.* c:\DOSUTIL ↵ (Ôe:\Õ is CD-ROM drive) <F=File, D=directory>? 3. Specify directory: <F=File,

  • Samsung ML-5000A, 18 Set Up Uninstall Printer Driver In Windows 95/98 1. From the Start menu, select Settings, then Printers. 2. In the Printers windows, select Samsung ML-5000A PCL5e. 3. From the File menu, select Delete. In Windows 3.x 1. Double-click the Control Panel icon within the Main program group. 2. Double-click the Printers icon. 3. Select Samsung ML-5000A PLC5e from the Installed Printers list, then click the Remove button. 02-Printing 7/16/99 6:30 PM Page 8

  • Samsung ML-5000A, 19 Set Up Printing a Document This procedure describes the general steps required for printing from various Windows applications. The exact steps for printing a document may vary depending on the application program you are using. Refer to your software applicationÕs documentation for the exact printing procedure. 1. Start the program you are using to create the document, and open the document you want to print. 2. Choose Print or Print Setup from the File menu. 3. Make sure the correct printer is selected as your default printer. 4. Click on Properties, Setup or Options if you want to make any adjustments as appropriate for printing your document. 5. Select OK to

  • Samsung ML-5000A, 20 Set Up Printing on Network Printer Setting Up Host PC Printer 1. Start Windows. 2. Click Start, select Control Panel, and double-click on the Network icon. 3. Click File and Print Sharing, check box(es), then click OK. Close the window. 4. Click Start and select Printers from Settings, then double-click your printer name (Samsung ML-5000A PCL5e). 5. Select Properties in Printer menu. 6. Click the Sharing tab, then check Shared As, fill in the Shared Name field, and click OK. Client PC Sharing Setup 1.

  • 6 Set Up Selecting a Location Place your printer on a flat, stable surface near your workstation. Leave enough space around the printer, so that you can easily: ¥ open the printer cover ¥ load the paper ¥ retrieve the paper ¥ open the front output tray and retrieve the paper from the front output tray ¥ allow air circulation around the vents to prevent the printer fr

  • Samsung ML-5000A, 7 Set Up Unpacking Remove the printer and all accessories from the packing carton. Save the carton and packing materials in case you need to repack the printer. Make sure you have the following items: * The cord may look different. The appearance varies according to country. Printer Toner cartridgePower cord* CD-ROM UserÕs Manual Setup Guide Printer Cable 01-Setup 7/20/99 9:25 AM Page 5

  • Samsung ML-5000A, 8 Set Up Installing the Toner Cartridge 1. To open the printer cover, hold the cover using both hands and pull it toward you. 2. Unpack the Toner Cartridge. Carefully remove the sealing tape. 3. Rock the Cartridge 5 or 6 times to distribute the toner. 4. Find the cartridge slots inside the printer, one on each side. 01-Setup 7/20/99 9:25 AM Page 6

  • Samsung ML-5000A, 10 Set Up 2. Attach the other end of the parallel cable to your computer. Note: Make sure the printer power is off when you connect it to the computer. Connecting the Printer to Your Computer 1. Plug the parallel interface cable into the connector on the back of the printer. Push the clips at each end of the connector into the notches on the printer cable. The clips snap when pushed into the notches. 01-Setup 7/20/99 9:25 AM Page 8

  • Samsung ML-5000A, 11 Set Up Attaching the Power Cord 1. Plug one end of the power cord into the connector at the back of the printer, and the other end into a wall outlet. 2. Turn on the printer. 01-Setup 7/20/99 9:25 AM Page 9

  • Samsung ML-5000A, This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any damages, direct or indirect, arising from or related to use of this manual. © 1999 Samsung Electronics Co. Ltd. All rights reserved. ¥ ML-5000A and Samsung logo are trademarks of Samsung Electronics Co. Ltd. ¥ Centronics is a registered trademark of Centronics Data Computer Corporation. ¥ PCL is a registered trademark of Hewlett-Packard Company. ¥ IBM, IBM PC are registered trademarks of International Business Machines Corporation. ¥ True Type is a registered trademark of Apple Computer, inc. ¥ Microsoft, MS-windows

  • Samsung ML-5000A, Control Locations and Functions 4 Front View 4 Rear View 5 Inside 5 Selecting a Location 6 System Requirement 6 Unpacking 7 Installing the Toner Cartridge 8 Connecting the Printer to Your Computer 10 Attaching the Power Cord 11 Loading a Stack of Paper 12 Installing Printer Driver 15 Windows 95/98/NT4.0 Installation 15 Windows 95/98 Plug and Play 16 If Windows Does Not Run the CD-ROM 16 Windows 3.1x Installation 16 Installing DOSRCP Utility 17 For DOS Users 17 Uninstall Printer Driver 18 In Windows 95/98 18 In Windows 3.x 18 Printing a Document 19 Printing on

More Instructions:

DOWNLOAD
DOWNLOAD

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kramer VP-8K User manual user manual kramer/vp-8k-IX5.pdf 14 May 2023 10
2 Saramonic SR-AX101 Operation & user’s manual saramonic/sr-ax101-E24.pdf 11 Dec 2023 6
3 Polk Audio RMDS1 Instruction manual polk-audio/rmds1-225.pdf 26 Aug 2022 32
4 Whirlpool MW8200XP User & care manual whirlpool/mw8200xp-5TD.pdf 02 Feb 2024 16
5 Minolta PageWorks Pro 18 Operation & user’s manual minolta/pageworks-pro-18-GNC.pdf 07 May 2023 219
6 Panasonic EB-G450 Technical manual panasonic/eb-g450-UML.pdf 03 Mar 2024 42

Similar Resources:

  • Digital Check

    TellerScan TS500

    (2 pages)
    ● Note: Digital Check does not provide the required device drivers or scanning software. Please contact your bank, IT department or other solution provider for further assistance with installing the driver or getting the scanning software set up or installed.● Install the device driver / software before connecting the USB cable to the scanner.● When co …
  • HP

    LaserJet Managed MFP E72525

    (234 pages)
    HP LaserJet Managed MFP E72525, HP LaserJet Managed MFP E72530, HP LaserJet Managed MFP E72535, HP LaserJet Managed Flow MFP E72525, HP LaserJet Managed Flow MFP E72530, HP LaserJet Managed Flow MFP E72535, HP Color LaserJet Managed MFP E77822, HP Color LaserJet Managed MFP E77825, HP Color LaserJet Managed MFP E77830, HP Color LaserJet Managed Flow MFP E778 …
  • Intermec

    PB2

    (2 pages)
    PB2 and PB3 Battery InstructionsUsing This BatteryThis lithium-ion battery (Model 318-040-001) is designed for use in these printers:PB2 Mobile Printer yPB3 Mobile Printer yCharging the BatteryBefore using your printer, you need to fully charge the battery. Batteries can be charged after a partial discharge without affecting the original battery capacity.Yo …
  • Kyocera

    FS-C5350DN

    (2 pages)
    Installation GuideClearance• Temperature: 10 to 32.5 °C (50 to 90.5 °F) The humidity should be 70 % or less when the temperature is 32.5 °C (90.5 °F)• Humidity: 15 to 80 %RH The temperature should be 30 °C (86 °F) or less when the humidity is 80 %• Power Supply: 120 V AC, 60 Hz, 9.2 A / 220 to 240 V AC, 50/60 Hz, 4.7 AFS-C5350DNEnvironmentCAUTI …
  • UBI

    EasyCoder 601

    (19 pages)
    UBI EasyCoder 601 – User's Manual1CONTENTSIntroduction Presentation of the EasyCoder 601 ........................................................... 3Get to Know Your Printer Front View ................................................................................................. 4Rear View .......................................................... …
  • WOOSIM

    PORTI-W25

    (29 pages)
    http://www.woosim.com All specifications are subjected to change without notice MODEL PORTI-W25 (Mobile Printer) Rev. 2.0 WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL …

Comments, Questions and Opinions: