Samsung EURO-9700 Operation Manual

Text of Samsung EURO-9700 User Guide:

• 3 Approved use The device is to be used only for receiving satellite programs; any other use is not allowed. Only the devices and system parts described in this manual may be connected to the satellite receiver EURO-9700 GOLD. This receiver has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions care

• Samsung EURO-9700, 54 4.4 Preferences 28 4.4.1 System Information 28 4.4.2 System Diagnostic 29 4.4.3 Software Upgrade 29 4.4.4 Data Transfer 30 4.4.5 Factory Default 31 5. Channel Organize 5.1 Edit Favorite 32 5.2 Edit Channel 33 5.2.1 Delete Channel 33 5.2.2 Skip Channel 34 5.2.3 Move Channel 35 5.2.4 Rename Channel 35 5.3 Edit Transponder 36 5.4 Edit Satellite 36 6. System Configuration 6.1 Language Selection 37 6.2 Time & Timer Setting 38 6.3 RF Channel 38 6.4 TV Type 39 6.5 OSD Setting 39 7. Parental Lock 7.1 Favorite Lock 40 7.2 Set Channel Lock 41 7.3 Change PIN Code 41 7.4 Receiver Lock 42 5. Troubleshooting 43 6. Technical Specifications 44 1. Connecting

• Samsung EURO-9700, • • • • • • • • • 76 EURO-9700 GOLD 1.2 Connecting the receiver with antenna system After installing your antenna system, connect the coaxial cable from the LNB of your antenna to "DISH INPUT" terminal marked at the rear of the EURO-9700 GOLD. All cable connectors should be finger tightened; do not use any kind of wrench while tightening connectors. The cable should be 75 ohm impedance coaxial twisted at the end with an "F" type connector. 1.3 Connecting the receiver to

• Samsung EURO-9700, • • • • • • • • • 98 EURO-9700 GOLD 2.2 Rear Panel 1. AC Mains: This is to plug in the AC mains power cord. The input AC voltage range is 100 V to 240 V, 50/60 Hz supply. 2. ANT IN: This is used to connect your local terrestrial antenna to your TV set. 3. DISH INPUT: This port is to connect the coaxial cable from LNB of your dish. The IF input is provided through this port and the input frequency range is 950-2150 MHz. Also the voltage switching 13 V and 18 V is passed through this port. 4. TV: This is used to connect your

• Samsung EURO-9700, 11 • • • • • • • • • 10 EURO-9700 GOLD 3.1 Display Screen 3.1.1 Banner Before you can view the television program, you must perform the installation Consequently, only menu images will be displayed at first. After the television channels have been programmed, the following display will appear. During this banner is displayed, Blue key will work for changing favorite list. After this banner disappears, Blue key will work as FIND key. Select the channel by pressing TV/RADIO key and +, -, P+ or P- or 0 ... 9 key. If you prefer to listen to a radio program, select and press the RADIO key. The same banner display will appear each time you shifted to a diffe

• Samsung EURO-9700, • • • • • • • • • 13 EURO-9700 GOLD • • • • • • • • • 12 EURO-9700 GOLD 3.5 Service List ● Press OK key to while you are viewing a program. ● Select list by pressing  ,  or TV/RADIO key. ● Select the channel by pressing +, -, P+, P-, or numerical keys(0...9). ● Press OK key to watch that channel. The color keys corresponds the following service list. ● Green (MUTE) key - Alphabetical ● Orange (TEXT) key - Satellite ● Blue (FIND) key - Provider ● Red (ALT) key - Transponder NN NN OO OO TT TT EE EE: The icon behind the channel name symbolizes scrambled channel. 3.3 Select Soundtrack ● Press Red (ALT) key to s

• Samsung EURO-9700, • • • • • • • • • 1514 EURO-9700 GOLD 3.5.3 Service Provider ● Press the Blue (FIND) key on the remote control unit to select the Provider list. ● Use the  or  keys to select a Provider group that you want. ● Use the +, - , P+ or P- keys to select a channel list that you want. 3.5.4 Service Transponder ● Press the Red (ALT) key on the remote control unit to select the Transponder list. ● Use the  or  keys to select a Transponder group that you want. ● Use the +, - , P+ or P- keys to select

• Samsung EURO-9700, • • • • • • • • • 17 EURO-9700 GOLD • • • • • • • • • 16 EURO-9700 GOLD Weekly program guide ● To see the weekly program guide, press Green (MUTE) key. ●  ,  keys - Use to display the program list by weekly EPG. P+, P- keys - Use to select the channel you want. ● To see the detailed program information, press the Red (ALT) key. ● If you want to change the program guide, press Orange (TEXT) key. 3.7 Subtitle When the current broadcasting program provides subtitle, press the Orange (TEXT) key to see the current subtitle language list. To change the subtitle lang

• The menu display is carefully created and user friendly to assure the easy operation of the receiver by the user. The main menu is classified into five sub menus that will carry out the various operations individually. 4.1 Language Setting When the language-setting screen is initially displayed in factory default, i. e. initial mode, select the language you prefer to use. The

• Samsung EURO-9700, The sub menu topics will be displayed from 1 to 5(refer to the User Interface structure). ● You must follow the Help menu commands at the bottom of the screen! Before you begin with the "Installation" menu, you should check in the 4th menu "System Configuration" whether all the information there is applicable for you. 4.3 Installation The menu provides settings for customizing, adding new services and displaying the status of the receiver. ● Select "Installation" in the main menu mode to configure each sub menu parameters. ● Enter

• Samsung EURO-9700, • • • • • • • • • 23 EURO-9700 GOLD • • • • • • • • • 22 EURO-9700 GOLD ● Select from Menu Mode: “User” mode : Enables control of basic Positioner function recommended for beginners. General user uses “User” mode. “Installer” mode : Complete control of the positioner’s full functions recommended for installers and professional users. ● After setting it to “User” or “Installer” mode, press OK key to enter this mode. 4.3.2 DiSEqC Setting DiSEqC (Digital Satellite Equipment Control) is the registered trademark of EUTELSAT. It is the more sophisticated way of controllin

• Samsung EURO-9700, • • • • • • • • • 25 EURO-9700 GOLD • • • • • • • • • 24 EURO-9700 GOLD 1.2.2 Installer Mode After checking the positioner’s state, installer should use this menu. He should set the “Disable Limits” before using User mode. ● Select the Drive Motor West/East and use the  /  keys to drive motor.  key drives to west and  key drives to east. ● Select “Enable Limit”, in order to enable “Set Limit”. ● Select “Disable Limit”, in order to disable “Set Limit”. ● Select “Reset Positioner” and press OK key to reset positioner. 4.3.2.1 User mode “User” mode : Enables c

• Samsung EURO-9700, • • • • • • • • • 27 EURO-9700 GOLD • • • • • • • • • 26 EURO-9700 GOLD 4.3.4 Manual Scanning To tune-in new channels and weak signals, this STB has been provided with the option “Manual Scanning” where the user can enter the channel data manually. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed: ● Select the target satellite for manual search. ● Load a transponder. This option will enable the user to load any transponder from the preprogrammed list available within the receiver. NN NN OO OO TT TT EE EE: When you enter Frequency after setting Lo

• • • • • • • • • • 29 EURO-9700 GOLD • • • • • • • • • 28 EURO-9700 GOLD 4.4.2 System Diagnostic To find out the condition of certain parts of the EURO-9700 GOLD, you can run a diagnostic test. Press the Green (MUTE) key to start the system diagnostic test. Press the Red (ALT) key for video checking. 4.4.3 Software Upgrade

• Samsung EURO-9700, • • • • • • • • • 31 EURO-9700 GOLD • • • • • • • • • 30 EURO-9700 GOLD 4.4.5 Factory Default This is to recover the Factory set values in case the user has encountered some problems after changing any values of channel data and others, which may be in error. The screen display will be as follows: At the request window, if you press OK key, the receiver will be reset to factory default settings automatically. NN NN OO OO TT TT EE EE: This causes your previous settings to be deleted! All settings and information including channel

• Samsung EURO-9700, • • • • • • • • • 33 EURO-9700 GOLD 32 Rename the content name or channel name ● To rename the content name or channel name, press Orange (TEXT) key. The program list will be displayed. ● Press Orange (TEXT) key again. Font Table will be displayed. Press 1...7 numerical keys for changing font table. ● Select desired character with +/-,  /  keys, and then press OK key to paste character to the string. Character can be deleted by P- key. ● When you press the TV/RADIO key, TV

• Samsung EURO-9700, • • • • • • • • • 35 EURO-9700 GOLD • • • • • • • • • 34 EURO-9700 GOLD 5.2.3 Move Channel You can move channel from the current list. ● Select the desired list with  /  or TV/RADIO keys. ● Select channel by pressing Blue (FIND) key. ● Press +/-, P+/P-, or 0...9 keys to change the position of the channel you want, and press EXIT key for confirmation. ● Press Blue (FIND) key again to return to previous state. ● If you want to return the channel to its initial position, do not save the changes made in this menu. 5.2.4 Rename Channel You

• Samsung EURO-9700, 37 • • • • • • • • • 36 EURO-9700 GOLD 5.3 Edit Transponder You can delete the transponder on the transponder list. ● Select the desired transponder list you want to delete by pressing OK key. ● Press EXIT key for confirmation. 5.4 Edit Satellite You can rename or delete the satellite list, as you want. ● Select the desired satellite list you want to delete by pressing OK key. ● To edit satellite name, press Orange (TEXT) key. ● Press EXIT key for confirmation. NN NN OO OO TT TT EE EE: This feature doesn

• • • • • • • • • • 39 EURO-9700 GOLD • • • • • • • • • 38 EURO-9700 GOLD 6.4 TV Type You can set the various media settings you want. Place the cursor on this sub menu and press OK. ● Select the TV system: PAL, SECAM, NTSC, PAL➔ (auto)NTSC, SECAM➔(auto)NTSC, NTSC➔(auto)PAL, NTSC➔ (auto)SECAM ● Select the TV type according to your TV: ST

• Samsung EURO-9700, • • • • • • • • • 41 EURO-9700 GOLD 40 This “Parental Lock” feature sets viewing restrictions and prevents unauthorized access to your STB through the PIN (Personal Identification Number), which is a 4-digit number. 7.1 Favorite Lock You can set the favorite channel lock by content item. ● Select the content item you want to lock by using +/- keys and then press OK key. All channels that have been set by each content item are locked. NN NN OO OO TT TT EE EE 11 11: If you alre

• Samsung EURO-9700, 43 • • • • • • • • • 42 EURO-9700 GOLD This will take you to the following menu: In this option, you need to enter the current PIN code at the first cursor, and at the second cursor enter the desired PIN code. To confirm, you need to enter the new PIN code again. Please remember the PIN code that should be a 4-digit numerical value. THE FACTORY PRESET PIN CODE: 0 0 0 0. NN NN OO OO TT TT EE EE:If you forget the PIN Code, please refer to the following instruction: 1. Press MENU Key on the RCU. 2. Selec

• 4544 6. TECHNICAL SPECIFICATIONS Power supply Type: SMPS Input voltage: AC 100 - 240V~, 50/60 Hz Fuse rating: 250 V T1.6 AH Tuner Freq. Range: 950 ~ 2150 MHz Input signal level: -65 ~ -25 dBm Channel selection: PLL frequency synthesizer Input impedance: 75 Ω unbalanced Connector type: F type female LNB power control: 13 V/18 V, 22 KHz tone DiSEqC: 1.2 supported 1. User section 4000

Related Products and Documents (Receiver):

Comparable Devices:

Similar Resources:

• DoorKing microPLUS Series (2 pages) microPlUS® / microClIK™ - transmitters DoorKing's transmitters are ideal for applications that require RF wireless access. Users can remain comfortably inside their vehicle while activating the RF transmitter without having to use a keypad or card reader. When activated, a data stream is sent to the remote SuperHet receiver. This data includes the tr …

• Wyrestorm RX-70-POH (2 pages) Before Installation4K @ 35m/114ft and 70m/230ft @1080p video are the maximum recommended transmission distances for this model and denotes recommended transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets. If any of the above is a factor in your installation, transmission range may b …

• Portech SC-100T (8 pages) PORTech Communications Inc.150 Shiang-Shung North RoadTai ChungTaiwan 403 http://www.portech.com.tw/SC-100T SC-100RSounds Cap …

• Pioneer VSX-D714-K (82 pages) ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2004UPDOWNMULTI J …

• Sherwood RD-606i (54 pages) RD-606iNETWORK AV RECEIVEROPERATING INSTRUCTIONS NETZWERK AV RECEIVERRED RECEPTEUR AVRESEAU RECEPTOR DE AVАУДИО/ВИДЕО СЕТИ РЕСИВЕР 606i(G) cover_cover.qxp 2011-05-12 오전 9:37 페이지 1 …

• Avocent LongView Wireless (2 pages) The following instructions will allow youto connect your LongView Wireless units.Should you require assistance, pleaseconsult your installer/user guide.To connect a LongView WirelessPowering up the transmitter and computerConnect your transmitter to an AC power source with oneof the included power supplies and power up your computer.NOTE: Use only an Avocent …

Comments, Questions and Opinions: