Samsung SMARTSERVER 370 Operation & User’s Manual

Text of Samsung SMARTSERVER 370 User Guide:

• Samsung SMARTSERVER 370, Note: To use this management port, you must first install the ASM device drivers as described in “Installing Advanced System Management device drivers” on page 41. If the management port is shared with the operating system, it is dedicated to the Remote Supervisor Adapter only while the server is turned off or during POST. The port is returned to the operating system after POST completes. You can view the port using the operating system or any application. The Remote Supervisor Adapter takes over the port from the operating system only when information about a critical event is received. The Remote Supervisor Adapter dials out and transmits an alert and keeps the port dedicated until th

• Samsung SMARTSERVER 370, Attention: To avoid damage to the Ethernet connector on the Remote Supervisor Adapter, do not connect the ASM Interconnect module to the Ethernet port. 1. Connect one end of a Category 3 or Category 5 Ethernet cable to the Ethernet port on the Remote Supervisor Adapter. Connect the other end of the Ethernet cable to the network. 2. Check the Ethernet LEDs to ensure that the network connection is working. The following illustration shows the location of the LEDs. Ethernet link LED The green Ethernet

• Samsung SMARTSERVER 370, Contents Safety ............................v Chapter 1. Introducing the SAMSUNG SmartServer 370 .........1 Related publications .......................2 Notices and statements used in this book ...............3 Features and specifications.....................4 What your server offers ......................5 Reliability, availability, and serviceability features .............7 Active Memory .........................8 Memory scrubbing and Memory ProteXion ..............8 Memory mirroring .......................8 IBM Director ..........................8 The UpdateXpress program ....................9 Server

• Samsung SMARTSERVER 370, While the server is turned off, move the switch to the position opposite its current position. You can then start the Configuration/Setup Utility program and reset the power-on password. You do not need to return the switch to the previous position. The power-on password override switch does not affect the administrator password. Administrator password If an administrator password is set, you must type the administrator password for access to the full Configuration/Setup Utility menu. You can use any combination of up to seven characters (A–Z, a–z, and 0–9) for the password. The Administrator password choice is on the Configuration/Setup Utility menu only if an Remote

• Remote console redirection From the Devices and I/O Ports choice, you can enable and configure the remote console redirection through the Remote Console Redirection submenu. The Devices and I/O Ports choice is on the full Configuration/Setup menu only. Complete the following steps to enable and configure the remote console redirection feature: 1. Ensure that you have installed and ena

• Samsung SMARTSERVER 370, Statement 2: CAUTION: When replacing the lithium battery, use an equivalent type battery recommended by the manufacturer. If your system hasa module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of. Do not: v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble Dispose of the battery as required by local ordinances or regulations. Statement 3: CAUTION: When laser products (such a

• Samsung SMARTSERVER 370, 7. Click Next. The “Configuration summary” window opens. 8. Review the information in the “Configuration summary” window. To change the configuration, click Back. 9. Click Apply; then, click Yes when asked if you want to apply the new configuration. The configuration is saved in the controller and in the physical drives. 10. Exit from ServeRAID Manager and remove the CD from the DVD-ROM drive. 11. Restart the server. Figure 14. “Configuration summary” window Chapter 2. Configuring the server 55

• Samsung SMARTSERVER 370, v Support for SAMSUNG and non-SAMSUNG servers, desktop computers, workstations, and mobile computers v Support for systems-management industry standards v Integration into leading workgroup and enterprise systems-management environments v Ease of use, training, and setup IBM Director also provides an extensible platform that supports advanced server tools that are designed to reduce the total cost of managing and supporting networked systems. By deploying IBM Director, you can achieve reductions in ownersh

• Samsung SMARTSERVER 370, The ServerGuide program requires a supported SAMSUNG server with an enabled startable (bootable) CD-ROM or DVD-ROM drive. In addition to the ServerGuide Setup and Installation CD, you must have your operating-system CD to install your operating system. The ServerGuide program has the following features: v Sets system date and time. v Detects the SCSI RAID adapter, controller, or integrated SCSI controller with RAID capabilities and runs the SCSI RAID configuration program. v Updates the licensed internal code (firmware) level without diskettes. v Checks

• Samsung SMARTSERVER 370, Turning off the server When you turn off the server and leave it connected to ac power, the server can respond to requests from the service processor, such as a remote request to turn on the server. To remove all power from the server, you must disconnect it from the power source. Some operating systems require an orderly shutdown before you turn off the server. See your operating-system documentation for information about shutting down the operating system. Statement 5: CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To

• Samsung SMARTSERVER 370, Rear view System power connectors (1 and 2): The system power cords are connected to these two connectors to provide power to the system. RXE Expansion Port B: Use this port to connect the server to a remote I/O enclosure when two SMP Expansion Modules are installed. Mouse connector: Connect a mouse or other PS/2 ® device to this connector. Keyboard port: Signal cables for a keyboard are connected to the keyboard port. Remote Supervisor Adapter connectors and LEDs: This group of connectors and LEDs located on the back of the server are used for system management infor

• Chapter 1. Introducing the SAMSUNG SmartServer 370 Your SAMSUNG SmartServer 370 server is a 4-U-high 1 rack model server for high-volume network transaction processing. This high-performance server, based on Enterprise X-Architecture ™ technologies, is ideally suited for networking environments that require superior microprocessor performance, efficient mem

• Samsung SMARTSERVER 370, v Install the operating system on the server, using ServerGuide and the documentation that comes with the operating system. v Install the agent component of UM Server Extensions to use the following Advanced System Management (ASM) Web interface features: – Shutdown O/S and then Power Off Server – Shutdown O/S and then Restart Server UM Server Extensions is on the system-management software CD that comes with the server. For information about installing the agent component, see the documentation that comes with the system-management CD. v To configure the remote alert recipients for

• Samsung SMARTSERVER 370, When you make configuration changes through other options in the Configuration/Setup Utility program, the changes are reflected in the system summary; you cannot change settings directly in the system summary. This choice is on the full and limited Configuration/Setup Utility menu. v System Information Select this choice to view information about your server. When you make changes through other options in the Configuration/Setup Utility program, some of those changes are reflected in the system information; you cannot change settings directly in the syst

• Samsung SMARTSERVER 370, Cabling for the ASM interconnect network Depending upon the servers you have, you might need additional ASM Interconnect modules or Category 5 or Category 3 Ethernet cables. For the servers that do not need an ASM Interconnect module, a module is still needed to connect the Remote Supervisor Adapter in the gateway server to the integrated ASM processor. After you make that connection, you can connect the servers together using their ASM interconnect ports. For additional information, see “ASM i

• Samsung SMARTSERVER 370, 1. Start the server, and watch the monitor screen. 2. When the message Press F1 for Configuration/Setup is displayed, press F1. The Configuration/Setup Utility main menu window opens. 3. Use the Up Arrow and Down Arrow keys (↑ and ↓) to select System Security; then, press Enter. The System Security window opens. 4. Select Remote Control Security Settings; then, press Enter. The Remote Control Security Settings window opens. 5. Enter the Remote Control Password that you will use each time you log in to the remote-control features of the Remote Supervisor Adapter ASM Web Int

• Statement 4: ≥ 18 kg (39.7 lb) ≥ 32 kg (70.5 lb) ≥ 55 kg (121.2 lb) CAUTION: Use safe practices when lifting. Statement 5: CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the dev

• Samsung SMARTSERVER 370, 2. Connect one or two Category 3 or Category 5 Ethernet cables to the other end of the ASM Interconnect module. 3. Continue with “ASM interconnect network configuration examples” on page 48. Figure 8. Connecting an ASM Interconnect module to an SmartServer 370 Chapter 2. Configuring the server 47

• Samsung SMARTSERVER 370, You can create a setup-replication diskette, which contains your hardware configuration selections. Use this diskette to replicate selections to other servers that are of the same model. You can create an operating-system replication diskette, which contains information that you need to complete multiple installations. Not all operating systems support operating-system replication diskettes. Installing your operating system without ServerGuide If you have already configured the server hardware and you decide not to use the S

• Samsung SMARTSERVER 370, Notices and statements used in this book The caution and danger statements used in this book also appear in the multilingual Safety Information book provided on the Documentation CD. Each caution and danger statement is numbered for easy reference to the corresponding statement in the safety book. The notice and statement definitions are as follows: v Note: These notices provide important tips, guidance, or advice. v Important: These notices provide information or advice that might help you avoid inconvenient or problem situations. v Attention: These notices indicate possible damage to programs, devices, or data. An attention notice is placed just before the instruction or situatio

• Samsung SMARTSERVER 370, v Load Default Settings Select this choice to cancel the changes you have made in the settings and restore the factory settings. v Exit Setup Select this choice to exit from the Configuration/Setup Utility program. If you have not saved the changes you have made in the settings, you are asked whether you want to save the changes or exit without saving them. Additional Configuration/Setup Utility menu choices With the IBM Remote Supervisor Adapter in your server, you can view the following additional menu choices: v System Card Data Select this choice to display information about your server. v PCI Slot/Device Information Select this choice to view the properties of adapt

• Using ServeRAID Manager Use ServeRAID Manager, which is on the ServeRAID Support CD, to: v Configure a redundant array of independent disks (RAID) v Restore a SCSI hard disk drive to the factory-default settings, erasing all data from the disk v View your RAID configuration and associated devices v Monitor the operation of your RAID controllers To perform some tasks, you can run Serve

• v Error LED - This amber LED goes on when a system management error has occurred. v ASM interconnect port - Signal cables for managing expansion module resources are connected to this port. v Ethernet activity LED: When the LED is green there is activity on the Ethernet LAN. v Ethernet link LED: When the LED is green the link is active. v 10/100 Ethernet port - Ethernet Signal cables are connect

• Samsung SMARTSERVER 370, Planning and cabling the interconnect network To support the most recent ASM features, a Remote Supervisor Adapter must be the main gateway interconnect to the ASM interconnect bus if the bus also includes servers with ASM PCI adapters or ASM processors. The Remote Supervisor Adapter forwards the ASM information generated by the servers attached to the ASM interconnect bus to other servers on the Ethernet network. The connected ASM processors and ASM PCI Adapters are managed through the new user interface an

• Safety Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Lees voordat u dit product installeert eerst de veiligheidsvoorschriften. Ennen kuin asennat tä

Related Products and Documents (Server):

Comparable Devices:

Similar Resources:

• Lexmark C544N/DN/DW/DTN (103 pages) C540n, C543dn, C544n/dn/dw/dtn,X546dtn MFPTechnical ReferenceNovember 2010 www.lexmark.comLexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.All other trademarks are the property of their respective owners.© 2010 Lexmark International, Inc.All rights reserved.740 West …

• Cisco Unified Contact Center Express (148 pages) Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Cisco Customer Response Solutions Servicing and Troubleshooting GuideCisco Unified Contact Center Express, Cisco Unified IP IVR, and Cisco Unified Queue Manager, Release 5.0(1)June 2007 …

• TAPKO SIM-KNX DINRAIL (2 pages) Operating Instructions SIM-KNX DINRAIL Release version/date: R1.1 / January 2019 © 2001-2019 TAPKO Technologies GmbH Im Gewerbepark A15, 93059 Regensburg, Germany Details, modifications and corrections may be subject to change without notice. TAPKO gives no warranty for the accuracy of the document. All rights reserved. Product description Connectors, b …

• Sena HelloDevice Pro PS110 (3 pages) www.sena.comHelloDevice Pro SeriesQuick Start GuidePS110Set DIP Switch & Pin-outsConnectionConfigurationSet serial DIP switch according to yourserial device requirements(RS-232/422/485)* Please note that the power of the Pro Series should be turned off before changing the serial communication type. User can choose one of the following processes1. Confi …

• Paradyne FrameSaver SLV 9124 (19 pages) 1FrameSaver SLV 9124Installation InstructionsDocument Number 9124-A2-GN10-10December 1999Product Documentation on the World Wide WebWe provide complete product documentation online. This lets you search thedocumentation for specific topics and print only what you need, reducing the waste ofsurplus printing. It also helps us maintain competitive prices fo …

• Sony MAV-70 (48 pages) MULTI ACCESS VIDEO AND AUDIO SERVERMAV-70INSTALLATION MANUAL1st Edition (Revised 1)Serial No. 10001 and Higher : MAV-70Serial No. 10001 and Higher : BKMA-PS70REDUNDANT POWER SUPPLY UNITBKMA-PS70 …

Comments, Questions and Opinions: