Tycon Power Systems TP-BC48-300 Operation & User’s Manual

Text of Tycon Power Systems TP-BC48-300 User Guide:

• TP-BC48-300 AC to DC48V UNINTERRUPTED POWER SUPPLY User Manual Specifications and Features:  300W Total Max. DC power output 4A Max. Charge current 6A Max.  Net weight, only 4.63 lbs/2.1kg  Dimensions 252*54*190 m/m (W*H*D)  Over Voltage protection  Over Current protection  Quiet Internal Cooling Fan  Input Voltage: Selectable AC input vo

• Tycon Power Systems TP-BC48-300, PANEL DESCRIPTION Item Name Description 1 Power Switch Control AC power On or Off, 2 Battery Type Selector WET Flooded battery GEL Gel battery 3 LED Indicators 3-1 LOAD Load Indicator Light GREEN when the LOAD is working 3-2 PWR AC Power Indicator Light YELLOW when the model with AC input and power switch is on 3-3 BATT Battery Polarity Indicator Light GREEN when BATTERY polarity connection is correct, light RED when connection is incorrect 3-4 CHD Floating Indicator

• Tycon Power Systems TP-BC48-300,  INSTALLATION: Before plugging in the model to an AC outlet, please make sure that the proper input voltage is selected on the rear of the unit. Select 115V for 100/110/120 AC operation or 230V for 200/220/240 AC operation. The factory default setting is 230V. Then, connect your device to the LOAD terminal and connect a lead acid battery to the BATTERY terminal, make sure the polarity of battery is correctly connected, select WET for wet battery, GEL for GEL or AGM battery. You may connect a solar panel or wind turbine to the BATTERY terminal at t

• Tycon Power Systems TP-BC48-300, If you connect a solar panel or wind turbine to the BATTERY terminal at the same time, if AC failed, when the battery voltage lower than 40V, the LOAD output will turn off, but if the output voltage of the solar panel or wind turbine is higher than the battery voltage, the battery will be charged by the solar panel or wind turbine, when the battery voltage is back to 51V, the LOAD output will recover automatically. The maximum load of the PS is around 300W, which means 4A maximum DC output on LOAD and 6A maximum charge current on BATTERY.

• Tycon Power Systems TP-BC48-300,  NOTICE: 1. DON’T CONNECT THE PS TO 12V OR 24V BATTERY. The PS was designed for 48V system. Connection to the wrong battery will damage the PS. 2. THE AC SWITCH MUST BE TURNED OFF AT ANY TIME WHEN THE BATTERY IS CHANGED. 3. Select the correct battery type on the panel, wrong selection will damage the battery or it will not fully charge the battery. Do not change the battery type selector when charging. 4. The model has a 6 amp AC input fuse inside of the unit. To replace the fuse you should remove the old fus

• Tycon Power Systems TP-BC48-300,  PROTECTION DESCRPTION: Battery Polarity Reverse Protection: when the battery polarity is reversed, the BATT indicator light will display RED and the BATTERY and LOAD terminals will terminate output. Battery reverse will not damage the model if the AC power is off. The AC switch must be turned off at any time when the battery is changed. If AC is on and the battery is disconnected, the PS polarity reverse protection is disabled, and if the polarity is reversed, the fuse of the PS will be burnt, sometimes causing a spark. Battery Low Voltage protection: When the AC is OFF or has failed, if the battery voltage is lower than 40V±0.2V,

Related Products and Documents (UPS):

Comparable Devices:

Similar Resources:

• HP R1500 (115 pages) HP 3 Phase UPS User Guide Abstract This document includes installation, configuration, and operation information for the HP 3 Phase UPS. This document is for the person who installs and maintains power products. HP assumes you are qualified in the servicing of high-voltage equipment and trained in recognizing hazards in products with hazardous energy level …

• Effekta OFFICE-RM 600 (48 pages) UPS Uninterruptable Power Supply OFFICE-RM 600 / 1000 Operating Manual V 1.0 Versions / Device numbers: ACX11OFR60000000 ACX11OFR1K000000 Translation of the original operating manual …

• CyberPower CST1300AL (2 pages) CST1300AL User’s Manual K01-0000263-01 Thank you for purchasing a CyberPower product. Please take a few minutes to register your product at www.cpsww.com/registration. Registration certifies your product's warranty, confirms your ownership in the event of a product loss or theft and entitles you to free technical support. Register your prod …

• Salicru SPS.ONE (33 pages) SPS.ONEUNINTERRUPTIBLE POWER SUPPLY (U PS) + VOLTA G E S TABILIZERS AND POWER LINE CONDITIONERS + SWITCH MODE POWER SUPPLY + I N DUSTRIAL P OWER SU PPLY + LIGHTING FLOW DIMMER STABILIZERS + STATIC INVERTERSUSER’S MANUALUNINTERRUPTIBLE POWER SUPPLYUSER UPS MANUAL Page 2USER SOFTWARE MA …

• Energenie EG-AVR-1001 (10 pages) USER MANUALHANDBUCHHANDLEIDINGMANUAL DEL USUARIOРУКОВОДСТВО ПОЛЬЗОВАТЕЛЯКЕРІВНИЦТВО КОРИСТУВАЧАEG-AVR-1001 AUTOMATIC AC VOLTAGE REGULATOR AND STABILIZER, LED, 220 V AC, 1000 VA …

• Adler Power CO-sinusUPS-500W/LCD Series (4 pages) ProblemPossible CausesAction to takeInverter is not starting when connected to the mains voltage supply1. Line cord plug is loose.2. Breaker is broken.3. Wall socket is damaged.1. Check the line cord plug.2. Replace the breaker.3. Check wall socket with a lamp.Output voltage is present,inverter emits continuous beep sound, the yellow LED flashes every 0.5 se …

Comments, Questions and Opinions: