Manualios.com

Sanyo 710-00792-1 Installation Manual

Sanyo 710-00792-1 Manual Online:

4.6, 2065 votes
Sanyo 710-00792-1 User Manual
Sanyo 710-00792-1 User Guide
Sanyo 710-00792-1 Online Manual

Text of Sanyo 710-00792-1 User Guide:

  • Please read all instructions below and install this system properly. Please read "SAFETY PRECAUTIONS" and "IMPORTANT SAFETY INSTRUCTIONS" on OWNER'S MANUAL to install and place this system. This system is supplied in 3 packages and they need to be installed. Please make sure all the parts are included. If any part is missing, or if

  • Sanyo 710-00792-1, 1 CHECK CONTENTS IN PACKAGES This system is supplied in 3 packages. Make sure all the parts listed below (cabinets, Installation parts, and accessories) are included in those packages. Top Cabinet : Refer to the steps 3 to 6 for installation. Center Panel ----------------------------------------- 1 Package 1 Package 2 Package 3 Bottom Cabinet : Refer to the steps 2, 6 and 7 for installation. Installation Part Owner's Manual --------------------------------------- 1 Installation Manual (this brochure) --------------- * AC Power Cord --------------------------------------- * Wireless Remote Control Unit -------------------- 1 Wireless/Wired Remote Co

  • 2 ASSEMBLE BOTTOM CABINET Remove the 4 Joint Bolts on the Bottom Cabinet. Keep these bolts for later use. They are necessary for joint the Top and Bottom Cabinets. Remove the 2 Cover Plates on the top of the Bottom Cabinet. Keep the Cover Plates for later use. Replace those plates, when the appliance needs to be transported. Install the Center Panel to the Bottom Ca

  • Sanyo 710-00792-1, 3 J0INT TOP AND BOTTOM CABINETS Lift the Top Cabinet and put it on the Bottom Cabinet. When setting the Top Cabinet, be sure the frame of the Bottom Cabinet is fitted into the frame of the Top Cabinet completely. Remove the 14 Screws and the Back Cover. Keep the screws and Back Cover. All the installations are finished, all those parts should be replaced. Remove the Cover Plate on the lower part of the Top Cabinet. Keep the Cover Plate for later use. Replace this plate when the appliance need to be transported. Joint Top and Bottom Cabinets Remove Back Cover Remove Cover Plate 1 2 3 Joint the Top and the Bottom Cabinets with the 4 Joint

  • Sanyo 710-00792-1, 4 SETUP PROJECTION MIRROR Remove the 4 Protection Pads inside of the Top Cabinet and remove the 2 Fixing Bands (right and left) of the Projection Mirror. Remove the 8 Screws(A) of the Mirror Arms. Lift the Projection Mirror and raise the Mirror Arms backward. Loosen the Screws(B) on the end of the Mirror Arms. Put the Mirror Holder between the Adjusting Nut and the Washer at each side of the Mirror. And then fix the Mirror Holders on the Mirror Arms with the Screws(B) temporary. Fix the Mirror Arms on the Cabinet with the Screws(A). Fix the Projection Mirror to the end of the Mirror Arms with the Screws(B) secur

  • Sanyo 710-00792-1, 5 ADJUST PROJECTION MIRROR When the figure of the projection image does not match the Projection Screen, adjust the Projection Mirror. If the figure fits the Projection Screen precisely, skip the steps 2, 3 and 4 and replace the Back Cover. Connect the projector to the AC outlet, and turn the projector on. Connect the video output equipment to the projector. Project the image of cross-hatch or circles to check whether the picutre is displayed fully on the Projection Screen and is not distorted. (Refer to the Owner's Manual for operation.) If the figure is distorted, adjust the Projection Mirror following the steps 2 to 4 below. If the picture is displayed

  • Sanyo 710-00792-1, 6 ASSEMBLE STORAGE SPACES Replace the Back Cover to the Top Cabinet. Turn the Back Cover over, and fix the cover in the reverse to the initial position. Replace Back Cover 1 Back Cover Screws (14 pcs) IInsert the Shelves' Pins into appropreate position of the walls of Storage Spaces. Install the Compartment Shelves in Storage Spaces. 1. Remove the Hinge Covers by removing the 2 screws of each Hinge. 2. Hold the Glass Doors between the Glass Hinges and the Hinge Covers. Install the Glass Doors so th

  • Sanyo 710-00792-1, Turn Lock Bolts to the direction indicated on the figure to lock the cabinet on the floor. Make sure that all the Casters are slightly raised from the floor. The tilt of Cabinet can be also adjusted with these Lock Bolts. Lock the Cabinet 1 CAUTION BE SURE TO LOCK THE CABINET WITH LOCK BOLTS PROPERLY. IF THE CABINET IS NOT LOCKED, CABINET IS UNSTABLE AND MAY FALL DOWN. Cabinet Dimensions ( W x H x D ) : 1532 mm (60.3") x 1968mm (77.5" ) x 747mm (29.4" ) Net Weight : 145kg (319.7lbs ) 7 LOCK CABINET Letting the cabinet down to move it. Lifting the cabinet up to settle it. Lock Bolt

Related Products and Documents (Projection TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 NGM Forward Infinity Manual  ngm/forward-infinity-738.pdf 28 Sep 2022 86
2 Frigidaire FEFS68CJTC Wiring diagram frigidaire/fefs68cjtc-T94.pdf 10 May 2023 1
3 Toshiba E-studio2505 Operation & user’s manual toshiba/e-studio2505-9J4.pdf 22 Aug 2022 116 9.83 Mb
4 Zavig F210A Quick installation manual zavig/f210a-13E.pdf 07 Jul 2023 13
5 Dell Latitude C800 Service manual dell/latitude-c800-Q6E.pdf 17 Sep 2023 63 2.89 Mb
6 MK Diamond Products MK-660 SERIES Owner's manual & operating instructions mk-diamond-products/mk-660-series-7Y3.pdf 10 Aug 2022 40

Similar Resources:

  • Polaroid

    Polaview 1700

    (6 pages)
    Quick reference guideThank you for purchasing Polaroid’s liquid-crystal-display(LCD) projection panel. This quick-setup information iscommon to both the Polaview Model 1700 and Model 1900Projection Panels, except where indicated.Quick setup1 Turn off your computer system and overhead projector.proceduresPlace your panel on the overhead projector.2 Connect …
  • Hitachi

    DP05

    (86 pages)
    SAFETY PRECAUTIONS ......................................................................................................2TECHNICAL CAUTIONS ......................................................................................................3SPECIFICATIONS ..................................................................................................... …
  • RCA

    M50WH187

    (2 pages)
    50” Diagonal DLP® High-Definition TelevisionFeatures and BenefitsBuilt-in HDTV/QAM Tuner for Access to Digital Programming Off-Air* or on CableDigital Cable Ready with CableCARD™ Input – No Cable Box Needed**Vibrant Color, Terrific Clarity & Contrast Without Motion Blur or Image Burn-inHome Theater Sound from Built-in 7-Band Graphic Equalizer or …
  • Hitachi

    46W500

    (92 pages)
    COMBINATION PROJECTIONCOLOR TV AND DVD PLAYER46W500OPERATING GUIDEIMPORTANT SAFETY INSTRUCTIONS 2-4FIRST TIME USE 5-20THE REMOTE CONTROLON-SCREEN DISPLAYUSEFUL INFORMATION INDEX 83-8937-6321-36SetupLocksAspectAudioVideoMoveSELSelChan. ManagerAs an ENERGY STAR®Partner, Hitachi, Ltd. has determined that thisproduct meets the ENERGY STAR®guidelines for energy …
  • Hitachi

    50VS69A

    (80 pages)
    LCD REAR PROJECTIONTELEVISIONOperating Guide for 50VS69A55VS69A and 62VS69AIMPORTANT SAFETY INSTRUCTIONS ....................................................................................... 2-3FIRST TIME USE.......................................................................................................................4-18THE REMOTECONTROL.......... …
  • Hitachi

    51F510

    (76 pages)
    PROJECTION COLOR TVOperating Guide for 57F510, 51F510IMPORTANT SAFETY INSTRUCTIONS................................................................................ 2-3FIRST TIME USE .................................................................................................................. 4-18THE REMOTE CONTROL ......................................... …

Comments, Questions and Opinions: