Manualios.com

Fujitsu MB2146-09B-E Operation Manual

Fujitsu MB2146-09B-E Manual Online:

4.9, 1679 votes
Fujitsu MB2146-09B-E User Manual
Fujitsu MB2146-09B-E User Guide
Fujitsu MB2146-09B-E Online Manual

Text of Fujitsu MB2146-09B-E User Guide:

  • Fujitsu MB2146-09B-E, i PREFACE Thank you for purchasing the F 2 MC * family BGM adapter (model number: MB2146-09B-E). The product is a development support tool for developing and evaluating applied products which use FUJITSU SEMICONDUCTOR microcontrollers (hereafter MCUs) that have a BDSU module. This manual describes how to handle the F 2 MC family BGM adapter. Be sure to read it before using the product. For information on the MCUs supported by this product, contact the their sales or support represen- tative. * : F 2 MC is the abbreviation of FUJITSU Flexible Microcontrol

  • Fujitsu MB2146-09B-E, ii ■ Caution of the products described in this document The following precautions apply to the product described in this manual. WARNING Indicates a potentially hazardous situation which, if not avoided appropriately, could result in death or serious injury and/or a fault in the user’s system. Electric shock, Damage Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault. Electric shock

  • iii Copyright ©2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved • The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. • The information, such as descriptions of function and application circuit examples, in this document are presented sole- ly for the purpose of reference to

  • Fujitsu MB2146-09B-E, 1 1. Checking the Delivered Product Before using the product, make sure that the package contains the following items: • BGM adapter*: 1 • USB cable (2.0m): 1 • Operation manual (Japanese version): 1 • Operation manual (English version - This document): 1 * : Referred to as the adapter. 2. Optional Parts A variety of optional parts are available for this adapter that may be purchased separately as needed. Consult a their sales or support representative for details. 3. Appearance and Part Names Figures 1 and 2 show the adapter appearance, major dimensions and part names. Figure 1 Adapter appearance (top view) Figure 2 Adapter appearance (front view) Interface c

  • Fujitsu MB2146-09B-E, 2 4. System Configuration ■ Using the adapter as an emulator system Connect the adapter between the host computer and the user system so that the adapter can serve as an emulator under control of the host computer. For using emulator debugger software on the host computer, refer to the "S OFTUNE Workbench OPERATION MANUAL". Figure 3 shows the system configuration when the adapter is used as an emulator system. Figure 3 System configuration (emulator system) ■ Using the adapter as a USB programmer The adapter connects the host computer and the serial interface of MCU with built-in fl

  • Fujitsu MB2146-09B-E, 3 5. Connections ■ Connection to the host computer Connect the adapter to the host computer using the USB cable. Figure 5 shows how to connect the USB cable. Figure 5 Connecting the USB cable ■ Connection to the user system Connect the adapter to the user system. Plug the user interface connector of the adapter into the adapter interface connector on the user sys- tem. When connecting the user interface connector, align the index marks (pin 1) on each of the connec- tors. For the specifications of the adapter interface connector, see “■ Adapter

  • Fujitsu MB2146-09B-E, 4 6. Specifications ■ General specifications Table 1 lists the general specifications of the adapter. Table 1 General specifications *1 : The maximum and minimum voltages depends on the MCU used. For details, contact the their sales or support representative. *2 : Does not include the power consumption of the MCU. *3 : The part number of the connector is: FAS-1001-2101-0BF (Yamaichi Electronics Co., Ltd.) ■ USB line specifications Table 2 lists the USB line specifications of the adapter. Table 2 USB line specifications Item Specification Name

  • 5 ■ Tool reset specifications A tool reset is a hardware reset by the adapter to reset the entire system of the MCU (including the BDSU module) on the user system. When both of the adapter power and MCU’s user power are turned on, the tool reset is canceled au- tomatically to enable the MCU to be evaluated. The following shows how to generate a tool reset and how l

  • Fujitsu MB2146-09B-E, 6 ■ Adapter interface specifications The pinouts of the adapter interface connectors mounted on the user system are shown in Tables 3 and 4. The recommended connectors are listed in Table 5, and the pin configuration is shown in Fig- ure 7. When the adapter interface connector is mounted on the user system, connect the MCU to the adapter interface connector according to the following specifications. Table 3 Adapter interface connector pinout (emulator system) *1 : “BGMA” represents the BGM adapter. *2 : “MCU” represents the evaluation MCU. Table 4 Adapter interface connector pinout (USB programmer) *1 : “BGMA” represents the BGM adapter. *2 : “MCU” r

  • Fujitsu MB2146-09B-E, 7 Table 5 Recommended adapter interface connectors Figure 7 Adapter interface connector pin configuration Figure 8 User interface circuitry Part number Specifications Manufacturer FAP-1001-2202-0BF Right-angle solder dip Housing provided, Middle latch provided Yamaichi Electronics Co., Ltd. FAP-1001-2204-0BF Straight solder dip Housing provided, Middle latch provided FAP-10-08#2-0BF Right-angle solder dip Housing provided, Latch not provided FAP-10-08#4-0BF Straight solder dip Housing provided, Latch not provided Index mark 10

  • 8 Table 6 DC specifications of the user interface *1 : The “H” level output current. *2 : The “L” level output current. *3 : The input leakage current. *4 : Does not include the current through the pull-up resistance. *5 : The voltage monitoring IC controls the on/off connection to the GND via bus switch. Connector pin number Circuit type I OH* 1 (mA) IOL* 2

  • Fujitsu MB2146-09B-E, SS01-00027-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM F 2 MC Family BGM ADAPTER MB2146-09B-E OPERATION MANUAL April 2010 the first edition Published FUJITSU SEMICONDUCTOR LIMITED Edited Sales Promotion Department

Related Products and Documents (Adapter):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Samsung GT-B7722 Operation & user’s manual samsung/gt-b7722-PEY.pdf 08 Oct 2022 94 1.38 Mb
2 JVC CS-GD4250 Instructions jvc/cs-gd4250-K7O.pdf 31 Mar 2023 2
3 Philips D3570 Operation & user’s manual philips/d3570-6YT.pdf 05 Feb 2024 9 0.16 Mb
4 Focus MANL-1161-04 Operation & user’s manual focus/manl-1161-04-BJ8.pdf 25 Mar 2024 80 3.01 Mb
5 Hotpoint DLB1250B Use and care manual hotpoint/dlb1250b-JIU.pdf 03 Jun 2023 16 0.77 Mb
6 Alinco DJ-180 Specs alinco/dj-180-371.pdf 10 Mar 2024 2 0.67 Mb

Similar Resources:

  • dji

    Ronin-S

    (7 pages)
    RONIN-S/SC Phone Holder2019.06v1.0User Guide使用说明使用說明ユーザーガイド사용자 가이드BedienungsanleitungGuía de usuarioGuide de l'utilisateurGuida dell'utenteGebruiksaanwijzingManual do utilizadorGuia do usuárioРуководство пользователя …
  • Verizon

    FiOS TV

    (12 pages)
    Cyan Magenta Yellow Black PMS 1795 C PMS Cool Gray 11 C PMS 3262 CLH: In ProgressSave Date: 10-12-2012 4:02 PMPrevious User: Raoul MatunduDocument Path: Macintosh HD 2:Users:tammy:Desktop..._12:CCF12076:12076_CCF_STB_Manual.inddJob #: CCF12076Client: VerizonJob Name: Set Top Box UPDATE Manual 2012Studio Artist: TammyProof #: 5-ReleaseCCF12076 Set Top Box Ma …
  • ADEMCO

    AlarmDecoder AD2

    (2 pages)
    PLEASE READ THIS LICENSE AGREEMENT CAREFULLY This license governs use of the accompanying firmware. If you use the device, you accept this license. If you do not accept the license, do not use the device. The embedded devices firmware ("Software") is licensed, not sold, to you by Nu Tech Software Solutions, Inc. ("NuTech Software Solutions& …
  • Extron electronics

    VGA Line Driver P/2 DA1

    (3 pages)
    Extron Electronics, USA1230 South Lewis StreetAnaheim, CA 92805USA714.491.1500 Fax 714.491.1517Extron Electronics, EuropeBeeldschermweg 6C3821 AH AmersfoortThe Netherlands+31.33.453.4040 Fax +31.33.453.4050Extron Electronics, Asia135 Joo Seng Road, #04-01PM Industrial BuildingSingapore 368363+65.6383.4400 Fax +65.6383.4664Extron Electronics, JapanKyodo Bu …
  • Intermec

    CK61

    (4 pages)
    IP30NI Compliance Insert Important Operating InstructionsThe Model IP30 Non-Incendive (NI) RFID reader has been qualified by Underwriters Laboratories Inc., to the requirements of the USA and Canada for use in Class I, Division 2-Groups A,B,C,D; Class II, Division 2-Groups F and G; Class III, Division 2, and non-hazardous locations only. The IP30NI has a T4 …
  • Rixen & Kaul

    KLICKfix MINI ADAPTER

    (2 pages)
    www.KLICKfix.comMade in Germany1kg max.Ø 15-60mmAM300 01/20Schnellbefestigung für Zubehör an Lenker, Rah-men und Sattelstütze mit Ø 15-60mm. Beim Ein-schieben in den KLICKfix Adapter verriegelt das Zubehör sicher und ist auf Tastendruck abnehmbar. WICHTIG Vor jeder Fahrt korrekte Verriegelung und festen Sitz des Zubehörs prüfen. Zubehör vor Tra …

Comments, Questions and Opinions: