Manualios.com

Fujitsu FPCBC27 Operation & User’s Manual

Fujitsu FPCBC27 Manual Online:

4.35, 1279 votes
Fujitsu FPCBC27 User Manual
Fujitsu FPCBC27 User Guide
Fujitsu FPCBC27 Online Manual

Text of Fujitsu FPCBC27 User Guide:

  • Fujitsu FPCBC27, 1 Fujitsu America, Inc. This user’s guide contains information on using the dual battery charger. We strongly recommend that you read this guide before using the battery charger. BATTERY CHARGER COMPONENTS The battery charging station (referred to in this document as the “charger”) is a versatile device that allows you to charge a variety of different battery packs simultaneously. The charger consists of the following components: • Charger base with built-in AC adapter • U. S. power cord Additionally, removable adapter modules are required to accommodate your specific battery types. The adapter modules must be ordered separately from the charger. BATTERY CHARGER

  • Fujitsu FPCBC27, 2 Table 1. LED Conditions LED Condition Meaning Charge Level (upper LEDs) Green, solid 100% charged Green, blinking 50-99% charged Orange, blinking 12-50% charged Red, blinking 0-12% Standby (upper LEDs) Red, solid Charger in standby Battery Detection (upper LEDs) Orange, solid Lights for a few seconds when battery detected. Error (lower LEDs) Red, solid* Battery error * A loose connection can also result in a red LED error indi- cation. Be sure the battery is connected securely to the charger. If the error indication persists, the battery is likely defec- tive. Remove the battery immediately from the charger. Battery Chargi

  • Fujitsu FPCBC27, 3 Figure 1. Dual Battery Charger, front (without Adapter Modules) Figure 2. Dual Battery Charger, rear (without Adapter Modules) Charger Base Power Indicator LED Module Indicator LEDs Bay Adapter Module Locks Battery Connectors Module Bay Power Switch Power Cable Connector Battery Charging Station B5FY-9511-02EN-00.fm Page 3 Friday, December 17, 2010 9:23 AM

  • Fujitsu FPCBC27, 4 Adapter Module Bays. The adapter modules bays each hold an adapter module. A variety of modules are available, and each is designed to accept a different Fujitsu battery. Power Cable. The power cable Supplies power to the charger. Power Switch. The power switch turns AC power on and off. Factors that can affect charger performance If the temperature of a battery connected to the charger is extremely high or low, the battery charger will stand by for charging until the battery returns to room temperature. This feature is designed to prevent battery damage. Figure 3. Adapter Module Examples Installing a module A v

  • Fujitsu FPCBC27, 5 1. Ensure the power cable is disconnected from the charger. 2. Select the correct adapter module(s) for the battery(s) you want to charge in one or both of the bays. 3. Position the battery plug access hole and the hole below it over the two adapter guides on the battery charger base (see Figure 4). Rest the adapter on the charger base, aligned with the two adapter guide holes. 4. Slide the adapter toward the front of the battery charger until the adapter lock snaps into the slot at the rear of t

  • Fujitsu FPCBC27, 6 Installing a battery 1. Position the battery over the module adapter with the bat- tery connector aligned with the charger’s battery plug. 2. Insert the battery into the adapter by positioning the front edge against the inside front of the adapter, then pressing down on the back end of the battery until it is securely seated. Note that if using the shorter adapter shown in Fig- ure 3, the battery should be inserted parallel to the adapter. Charging a battery To charge a battery, follow these steps: 1. Connect the power cord to the power cable

  • Fujitsu FPCBC27, 7 Removing a battery To remove the battery from an adapter, please perform the following steps. (See Figures 1 and 4.) 1. Hold the battery charger down with one hand while grasp- ing the battery firmly with the other hand. 2. Pull the battery directly upwards to remove it. Removing a module 1. Using a pen or narrow screwdriver, press down on the adapter module lock to unlock it while pulling the adapter towards the back of the charger base. 2. Once the adapter is free of the guides, lift it off the

  • Fujitsu FPCBC27, 8 below). It is normal for the charger to become slightly warm during charging. • Do not use the battery charger in humid, dusty, or poorly ventilated places or if any foreign substance, such as water or dirt has gotten inside. • Replace any charger that has LEDs which do not indicate the correct operating mode (See Table 1). Connecting battery chargers On the bottom of the battery charging station, there is a rotating hook with which you can connect one battery charger to another. The hook is primarily designed to

  • Fujitsu FPCBC27, 10 Fujitsu America contact information If you have problems you are unable to resolve, consult your support representative at: • 1-800-8FUJITSU (1-800-838-5487) • Web Site: http://www.computers.us.fujitsu.com/support CHARGER SPECIFICATIONS Specification Details Power Requirements 100-240 V, ~ 50-60 Hz Operating Temperature 5°C – 35°C Non-Operating Temperature -10°C – 60°C Operating Humidity 10% to 90% Non-Operating Humidity 5% to 95% Maximum Outer Dimensions (without battery adapters) Width: 6.7” (170 mm) Depth: 5.9” (150 mm) Height: 2.2” (57 mm) Weight (without battery adapters) 1.54 lbs. (700 g)

  • 11 DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu America Inc. Address: 1250 E. Arques Avenue, Sunnyvale, California 94085 Telephone: (408) 746-6000 Declares that product: Battery Charger Model FPCBC27 Complies with Part 15 of the FCC Rules. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Pa

  • 12 Fujitsu America, Inc. 1250 E. Arques Avenue, Sunnyvale, California 94085 For more information, call 1-800-FUJITSU or visit our Web site at: www.ShopFujitsu. For technical support call:1-800-8FUJITSU (1-800-838-5487) Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd. All other trademarks mentioned herein are the property of their respective owners. Produc

Related Products and Documents (Battery Charger):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 BMW X5 - CATALOGUE Specifications bmw/x5-catalogue-LR7.pdf 24 Aug 2023 11 0.34 Mb
2 PFTAS NB series Owner's manual pftas/nb-series-59O.pdf 29 Nov 2023 31
3 HP P1600 Operation & user’s manual hp/p1600-6XG.pdf 15 Mar 2024 48
4 Cub Cadet 76 Service manual cub-cadet/76-R22.pdf 24 Aug 2023 41 7.95 Mb
5 Image Dynamics USA XS Operation & user’s manual image-dynamics-usa/xs-WYV.pdf 08 Sep 2022 5
6 Behringer Minimon Mon800 Technical specifications behringer/minimon-mon800-DBB.pdf 02 Oct 2022 3 0.37 Mb

Similar Resources:

  • Dynamite

    DYN4060

    (4 pages)
    Thank you for purchasing the Dynamite® AC/DC Li-Po Charger. It’s a DC-powered charger meant only for 2–3 cell lithium-polymer (Li-Po) battery packs and features a microchip CPU controller with a large LED to display the charge status. It also precisely follows standard Li-Po charger algorithms. This programmed set of charging rules tells the charger to …
  • ULTIMATE SPEED

    ULG 12 A2

    (63 pages)
    CAR BATTERY CHARGER WITH JUMP START FUNCTION ULG 12 A2IAN 277071 CAR BATTERY CHARGER WITH JUMP START FUNCTION Operation and Safety Notes Translation of the original instructions BA TTERIOPLADER MED ST ARTHJÆLPFUNKTION Brugs- og sikkerhedsanvisninger Oversættelse af den originale driftsvejledning CHARGEUR DE BATTERIE POUR VOITURE …
  • Kompernass

    TRONIC TLG 1750 B2

    (32 pages)
    KOMPERNASS GMBHBURGSTRASSE 21 · D-44867 BOCHUMwww.kompernass.comID-Nr.: TLG 1750 B2-11/10-V2IAN: 61669Quick-Charge Battery Charger TLG 1750 B26QUICK-CHARGE BATTERY CHARGEROperating instructionsCV_61669_TLG1750B2_LB6.qxd 17.01.2011 10:00 Uhr Seite 1 …
  • Speedway

    07215

    (9 pages)
    This product contains or, when used, produces a chemicalknown to the State of California to cause cancer and birthdefects or other reproductive harm.(California Health & Safety Code § 25249.5, et seq.)WARNING*Actual product may vary slightlyPlease carefully read and save these instructions before appempting to assemble, maintain, install, or operate thi …
  • BASETech

    BTL4B

    (68 pages)
    BedienungsanleitungBTL4B Rundzellen-LadegerätBest.-Nr. 1997933 Seite 2 - 18Operating InstructionsBTL4B Round Cell ChargerItem No. 1997933 Page 19 - 34Mode d’emploiBTL4B Chargeur pour piles rondesN° de commande 1997933 Page 35 - 50GebruiksaanwijzingBTL4B BatterijladerBestelnr. 1997933 Pagina 51 - 66 …
  • Canon

    3509B001

    (179 pages)
    Camera User GuideDIGITAL CAMERACamera User GuideENGLISHCDI-E403-010 XXXXXXX © CANON INC. 2009 PRINTED IN JAPANTrademark Acknowledgments• The SDHC logo is a trademark.• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.Disclaimer• Reprinting, transmitting, or storing in a retrieva …

Comments, Questions and Opinions: