Manualios.com

Fujitsu ECLIPSE CD8455 Owner's Manual

Fujitsu ECLIPSE CD8455 Manual Online:

4.3, 769 votes
Fujitsu ECLIPSE CD8455 User Manual
Fujitsu ECLIPSE CD8455 User Guide
Fujitsu ECLIPSE CD8455 Online Manual

Text of Fujitsu ECLIPSE CD8455 User Guide:

  • Fujitsu ECLIPSE CD8455, 65 Basic operation IV Setting the steering switch function (U.S.A. only) The vehicle’s factory loaded steering switch becomes inoperable when the CD8455 is installed. The ECLIPSE website (E-iSERV) provides software that enables steering switch operation even with the installation of the deck. Import this software into your CD8455. For details, contact the store from which you purchased your deck. Depending on your vehicle’s make and model, material downloaded from the website may not be compatible with your steering switch. Software for the steering switch can be downloaded and imported into the deck as follows: Consult the store from which you purch

  • Fujitsu ECLIPSE CD8455, 149 How to operate the Sound Adjustment Mode IX Turn the [SEL] button to select a setting item. When the button is turned, the setting item changes in the following order and the selected item is highlighted. Press the [SEL] button. PEQ Time Alignment X-Over Harmonizer Non-F Phase Non-F Output SP Layout Custom Mode Sound Data CD8455.book 149 ページ 2004年12月11日 土曜日 午後7時24分

  • Fujitsu ECLIPSE CD8455, 192 How to operate the receiver with an optional CD changer connected How to operate the receiver with an optional CD changer connected This section covers the operation of an optional CD changer that is connected to the receiver. To switch from another mode, press the [DISC MS] button for less than one second. Switching the input channel Some connected CD changers will allow you to switch the input channel. Press the [SEL] button for more than one second. Each time the button is pressed, the input channel will switch between analog input and digital input. Listening to a CD Press the [DISC MS] button for less than one second. Each press of the button switches the

  • Fujitsu ECLIPSE CD8455, 188 How to use the remote control Advancing to the next track or returning to the beginning of the track being played Press the [ TRACK ] button. [ ] button: Advances to the next track. [ ] button: Returns to the beginning of the track being played. (Press repeatedly to move to previous tracks.) Skipping to the next or previous disc Press the [ DISC ] button. [ ] button: Selects the next higher number disc. [ ] button: Selects the next lower number disc. Hold the [ ] button down to fast forward, or the [ ] button to rewind through the track being played. [ DISC ] buttons [TRACK ] buttons [MUTE] button [BAND] button CD8455.book 1

  • Fujitsu ECLIPSE CD8455, 115 How to operate the tuner VIII Changing the reception sensitivity for automatic scanning The deck lets you select the reception sensitivity to be used for automatic scanning of stations. The two sensitivity modes available for this deck are AUTO mode and DX mode. Check that the deck is in standby mode. Press and hold button [1], then the [FM AM] button, and hold both for more than three seconds. The mode switches between AUTO mode and DX mode each time the buttons are pressed. When an optional HD Radio tuner unit is connected, reception sensitivity is set to the AUTO Mode. The DX Mode is unavailable. (U.S.A. only) AUTO Mode During automatic scanning, the reception sensiti

  • Fujitsu ECLIPSE CD8455, 218 Specifications Specifications <GENERAL> <FM TUNER> <AM TUNER> <CD SECTION> Power Supply 14.4V DC (11-16V) Current Drain 3A Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/8" (178 x 50 x 155mm) Mass (weight) Approx. 1.7kg Usage temperature range -20°C to +65°C (-4°F to +149°F ) Storage temperature range -40°C to +85°C (-20°F to +185°F ) Frequency Range USA: 87.75~107.9MHz (0.2MHz step) Asia: 87.5~108MHz (0.05MHz step) Australia: 87.5~108MHz (0.1MHz step) Latin America: 87.75~107.9MHz (0.1MHz step) Usable Sensitivity 13dBf 50dB Quieting Sensitivity 14dBf Frequency Response 30~15,000Hz, ±3dB Stereo S

  • Fujitsu ECLIPSE CD8455, 82 How to operate the CD player Turn the [SEL] button to select an address from A to E. The patterns switches between the following. The characters for the selected item are highlighted and the memory allocation address changes. MEMORY A (standard) AM/FM: 1/3, CD title memory: 30 titles MEMORY B AM/FM: 2/5, CD title memory: 40 titles MEMORY C AM/FM: 1/3, CD title memory: 60 titles MEMORY D AM/FM: 2/5, CD title memory: 80 titles MEMORY E AM/FM: 3/8, CD title memory: 100 titles Press the [SEL] button. The selected settings will take effect. Press the [RTN] button. At this time, other adjustments can also be made in function mode. Press the [FUNC] o

  • Fujitsu ECLIPSE CD8455, 141 How to operate the Sound Adjustment Mode IX Rear speaker position selection (Rear SP) You can select the rear speaker installation location, allowing you to select the optimum time alignment settings automatically. Turn the [SEL] button to select Rear SP. The selected item will be highlighted. Press the [SEL] button. The mode will change to rear speaker position setting mode. Turn the [SEL] button to select the setting item. When the button is turned, the setting item changes in the following order and the selected item is highlighted.

  • Fujitsu ECLIPSE CD8455, 20 Operating precautions About Memory Sticks ● Do not store Memory Sticks in places that are subject to static electricity and electrical interference, otherwise the data they contain may become corrupted. ● In order to protect the player, the player's functions will be stopped automatically if a problem occurs. If the player cannot be operated even after following the instructions that appear on the screen, the unit is malfunctioning, and you should ask the place of purchase for further advice. ● If using a Memory Stick Duo, you will need to use it with a Memory Stick Duo adapter. ● Only Memory Sticks with a

  • Fujitsu ECLIPSE CD8455, IMPORTANT RECORD YOUR “KEY CD” OR “MEMORY STICK (SECURITY CODE)” HERE… STORE YOUR “KEY CD” OR “MEMORY STICK (SECURITY CODE)” ALONG WITH YOUR OWNER’S MANUAL. 239 CD8455.book 239 ページ 2004年12月11日 土曜日 午後7時24分

  • Fujitsu ECLIPSE CD8455, 223 Mounting instruction XIX –If installing the main unit by the side brackets of the vehicle– Remove the pockets and any other accessories from the center cluster to make room for the main unit. Remove the mounting side brackets for the pocket. Attach the side brackets to the main unit. Install the main unit in the vehicle. CENTER CLUSTER POCKET SCREWS 1 10 MAIN UNIT POCKET HEX-HEAD BOLT (red : 5 x 8 mm) SCREWS [x 4] SIDE BRACKETS CD8455.book 223 ページ 2004年12月11日 土曜日 午後7時�

  • Fujitsu ECLIPSE CD8455, 161 How to operate the Sound Adjustment Mode IX Time alignment adjustment (Time Alignment) The delay time and level of the sound from each speaker can be adjusted in order to correct any phase mismatches in the sound resulting from the listening position. (For details about speaker layout selection, see page 169.) Turn the [SEL] button to select Time Alignment. The selected item will be highlighted. Press the [SEL] button. The mode will change to time alignment adjustment mode. Press the [SEL] button to select the speaker band to be adjusted. Each time the button is pressed, the selection changes in the following order. Spea

  • 88 How to operate the MP3/WMA player Listening to MP3/WMA file Press the [DISC MS] button for less than one second to switch to the CD player mode. This starts MP3/WMA file play. Disc mode from CD player ➔ Memory Stick player in order each time the button is pressed. If an external CD changer is connected, each additional press of the [DISC MS] button will switch modes from CD c

  • Fujitsu ECLIPSE CD8455, 182 How to operate the AREA SHOT function (U.S.A. only) Changing AREA SHOT screens Press the [RTN] button. In the AREA SHOT mode, the audio screen can be accessed. Pressing the button repeatedly allows you to switch back and for the between the AREA SHOT screen and the Audio screen. When a GPS unit is connected, the following operations are available. ● When your vehicle enters the display/map range of the guidance point, a blinking marker will appear to indicate the position of your vehicle.

  • 98 How to operate the Memory Stick player Insert the MG Memory Stick. When attempting to record from a CD, make sure to insert the CD. When attempting to record from the radio, etc., make sure to turn ON the desired sound source. Press the [FUNC] button for more than one second. Recording begins. When recording a music CD, the CD plays simultaneously. Press the [F

  • Fujitsu ECLIPSE CD8455, 76 How to operate the CD player Creating a title for a CD A CD title may be created, attached and displayed for your discs. If external CD changers are connected, a title for a CD will be created in the same way. It is assumed here that the CD to be titled is playing. Press the [FUNC] button for less than one second while in the disc mode. The function mode is adtivated. Turn the [SEL] button to select Title. The selected item will be highlighted. Press the [SEL] button. The disc title setting mode is activated. Press the [ ] button to selec

  • Fujitsu ECLIPSE CD8455, 96 How to operate the Memory Stick player Ejecting the Memory Stick Press the [OPEN] button. The front panel opens. Eject the Memory Stick. Lightly press the Memory Stick once. Press the [OPEN] button. The front panel closes. Memory Stick will not eject by itself. Lightly press the Memory Stick to eject. ● Do not drive with the front panel open. The panel may cause unexpected personal injury during a panic stop, or the like. ● Do not attempt to close the front panel by hand. Doing so may damage the panel. ● Do not eject the Memory Stick while the Memory Stick access indicator is illuminated. [OPE

  • 37 ESN security operating procedure III If the contents recorded in the Memory Stick match the information recorded by the deck, [OK] will appear on the display for two seconds, and then the deck will return to normal operation. What happens if a Memory Stick or security code is incorrect? After the 5th incorrect attempt, the display reads [HELP] for five seconds. After

  • Fujitsu ECLIPSE CD8455, 221 Mounting instruction XIX Mounting instruction Mounting the main unit –If installing the main unit by the mounting sleeve– Insert the mounting sleeve into the opening in the vehicle dash board or console box. Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve. Attach the side brackets to the main unit using flathead screws. BEND THE MOUNTING TABS. DASH BOARD OR CONSOLE BOX MOUNTING SLEEVE 2 MAIN UNIT1 SIDE BRACKETS [ x 2 ] 3 FLAT HEAD SCREWS [ x 2 ] (red: 5 x 8mm) 9 CD8455.book 221 ページ 2004年12月11日 土曜日 午後7時24分

  • Fujitsu ECLIPSE CD8455, 202 How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) Turn the [SEL] button to select AUTO or OFF. The selected item will be highlighted. In the [AUTO] setting, the selection is switched between digital and analog reception automatically. In areas where digital reception is not possible, reception is automatically switched to analog to avoid loss of reception. During digital reception, [DIGITAL] is shown on the display. This is cleared during analog reception. In

  • 9 Table of Contents Operating precautions.............................................................................. 16 Names of controls and parts.................................................................... 23 ESN security operating precedure .......................................................... 24 Basic operation ...............................................................

  • Fujitsu ECLIPSE CD8455, 22 Operating precautions About cleaning the Memory Sticks ● In order to maintain good audio performance from Memory Sticks, periodically wipe the cartridge clean of any dust and other contamination with a dry cloth. CD8455.book 22 ページ 2004年12月11日 土曜日 午後7時24分

  • Fujitsu ECLIPSE CD8455, 15 Switching between displays when receiving HD Radio............................................... 201 HD Radio reception settings ....................................................................................... 201 How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)................................................. 203 About SIRIUS satellite radio ....................................................................................... 203 Selecting the radio mode ............................................................................................204 Select

  • Fujitsu ECLIPSE CD8455, 204 How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) The receiver will accept up to 24 stations in memory. Selecting the radio mode Press the [FM AM] button for more than one second. The mode switches between satellite radio mode and FM/AM radio mode each time the button is pressed. Selecting a channel Press the [FM AM] button for less than one second to switch to the desired SR bands. Radio bands will switch from SR1 ➔ SR2 ➔ SR3 ➔ SR4 in order each time the button is pressed. Turn the [SEL] button to the left or right to tune to a channel. Turn to the r

  • Fujitsu ECLIPSE CD8455, 123 How to operate the Sound Adjustment Mode IX Crossover The frequency band that is stored by audio media such as CDs is a fairly wide range from 20 Hz to 20 kHz, and it is difficult for a single speaker to be able to play back all frequencies in such a wide range. Because of this, several speakers can be used, with different frequency bands (such as treble, medium and bass) allotted to each speaker so that wide frequency ranges can be played back. The "Crossover" function is used to allot the frequency ranges that are to be played back by each speaker in accordance to the installed speaker

  • 207 How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) XIV Manually setting channels into memory This section covers the setting of channels in memory under the numbered buttons. Turn the [SEL] button to the right or left to tune to the channel to be entered in memory. Select any button, from [1] to [6], and press it for more than two seconds. The

Related Products and Documents (Car Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kenmore THE ECONOMIZER 153.333831 Owner's manual kenmore/the-economizer-153-333831-PUR.pdf 11 Apr 2023 32
2 LG L1511S Service manual lg/l1511s-8MP.pdf 29 Jan 2024 28
3 Fly Synthesis Texan top class 580 ISR Maintenance manual fly-synthesis/texan-top-class-580-isr-9B4.pdf 20 Oct 2022 77
4 Chauvin Arnoux C.A 1227 Operation & user’s manual chauvin-arnoux/ca-1227-3A8.pdf 18 Dec 2023 24
5 usa-spec SCD Series Owner's manual usa-spec/scd-series-6TU.pdf 27 Jan 2023 10
6 Sony SVS13112FXW Specifications sony/svs13112fxw-4KF.pdf 23 Jan 2024 2

Similar Resources:

  • Sony

    BDVT11 - Blu-ray Disc/DVD Home Theater System

    (1 pages)
    If you are like most Americans, you have a television in your home. Many homes, in fact, have more than one television.The home theater entertainment experience is a growing trend, and larger televisions are popular purchases and are not always supported on the proper TV stands.Sometimes televisions are improperly secured or inappropriately situated ondresse …
  • GROM Audio

    GROM-USB2 MP3

    (8 pages)
    2.1.2 1 GROM-USB2 MP3 car stereo adapter kit Chapter 1 – Introduction 1.1 Subject Thank you for purchasing the GROM-USB2 adapter, which has been designed to provide endless hours of listening pleasure through most vehicles’ factory radio. To ensure that your GROM-USB2 interface performs correctly in your car or truck, we recommend that you read this …
  • Sony

    MEXBT5700U - CD Receiver Bluetooth Hands-Free

    (61 pages)
    FRUSOperating Instructions Mode d’emploi Owner’s RecordThe model and serial numbers are located on the bottom of the unit.Record the serial number in the space provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. MEX-BT5700U Serial No. To cancel th …
  • Pioneer

    DEH-P5100R

    (112 pages)
    Multi-CD/MD/DAB control High power CD playerwith RDS tunerReproductor de CD de alta potencia con controlmúltiple de CD/MD/DAB con sintonizador RDSOperation ManualDEH-P5100RDEH-P5100R-BDEH-P5100R-WManual de OperaciónENGLISHESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS …
  • Sony

    MEX-BT3700U

    (2 pages)
    MEX-BT3700UBT-CD Receiver Head Unit The 13-segment LCD with bright fluorescent backlight makes it easy to read song information or explore your CD files and folders.Illuminated keys help you find and select control functions in low light and compliment the MEX-BT3700's backlit display.The MEX-BT3700U features Bluetooth®hands-free with an integrat …
  • JVC

    KS-FX270

    (35 pages)
    INSTRUCTIONSMANUAL DE INSTRUCCIONESMANUEL D’INSTRUCTIONSFor customer Use:Enter below the Model No. andSerial No. which are located onthe top or bottom of the cabinet.Retain this information for futurereference.Model No.Serial No.GET0008-001A[J]For installation and connections, refer to the separate manual.Para la instalación y las conexiones, refiérase a …

Comments, Questions and Opinions: