Fujitsu PRIMERGY ECONEL30 Configuration Manual

Text of Fujitsu PRIMERGY ECONEL30 User Guide:

• Fujitsu PRIMERGY ECONEL30, PRIMERGY Econel30 System configurator and order-information guide Contents Instructions Configuration diagram Configurator 0 System software I Basic unit II Processor III Memory IV Graphics V Accessible drives VI Hard disk drives VII SCSI Controller VIII Disk array IX Communikation/Network X Miscellaneous XI Country specific power cord Change report PRIMERGY Server November 2003

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide PRIMERGY Econel30 Status 2003-10-28 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/ System-Architect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements. The System configurator is divided into several chapt

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide PRIMERGY Econel30 Status 2003-10-28 Configuration diagram for "PRIMERGY Econel30" system unit SIDE VIEW FRONT VIEW System unit ( I ) Pentium 4 / Celeron Standard Power supply Processor ( II ) Memory ( III ) 5.25"x1.6" DVD Extension slots 5.25"x1.6" Graphics ( IV ) SCSI Controller ( VII ) Disk array Communication/Network ( IX ) 5.25"x1.6" Miscellaneo

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide Start "PRIMERGY Econel30" PRIMERGY Econel30 Status 2003-10-28 SW Configurator mit OEM-Software ohne OEM-Software für PRIMERGY-Server für PRIMERGY-Server Bis auf OEM-SW von Vmware und F5 ist die Verwendung von OEM-Betriebssystem- Software später nicht mehr erlaubt. For all SW products listed below please refer to the corresponding software configurator accessible via the Extranet under "PC Configurations, Configurator for PRIMERGY SW", URL see

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide Start "Econel30" PRIMERGY Econel30 Status 2003-10-28 Section I Basic unit System unit consisting of: * Housing including power supply * Systemboard with - Ultra DMA-100 Controller on-board (for 2x 2 drives) - 7 slots:1x AGP, 6x PCI * 1 drive bay 3.5" (occupied by 1 floppy disk 3.5"/ 1.44MB) * 3 bays 5.25" for accessible drives (one is occupied by 1 DVD) * 4 bays for IDE/SCSI HDs (internal) * Audio on-board * AGP-graphics card ATI Rage128 (16MB) in AGP slot * LAN (Intel) on-board * a

• System configurator and order-information guide A PRIMERGY Econel30 Status 2003-10-28 Section II Processor Included in the basic unit! Section III Memory There are 2 memory slots. They can be equiped with 256MB, 512MB, 1GB. Mix and match is possible. One memory slot is occupied! S26361-F2580-E256 S26361-F2580-E512 S26361-F2580-E513 Memory 256MB DDR-R

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide B PRIMERGY Econel30 Status 2003-10-28 Section V Removable Media Drives There is 1 drive bay 3.5" occupied by 1 floppy disk 3.5"/ 1.44MB and 3x 5.25" bays for accessible drives. S26361-F3008-E1 CD-RW / DVD drive 1x 48/24/48/16 IDE only W2K and Linux 1.6 * 5.25", anthracite bezel max. 1x per system S26361-F2238-E3 Tape drive SLR 100 50GB, 5MB/s, U2W SCSI Connector: HD68 without cable incl. description (Ger/US) data and cleaning cartridge 1.6 * 5.25", anthracite bezel max. 1x per system 1x S26361-F2233-E3 S26361-F2848-E3 S26361-F2849-E3 Tape drive

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide C PRIMERGY Econel30 Status 2003-10-28 Section VII SCSI Controller There are 7 slots (max. 340 mm): 1x AGP (ocuppied by AGP graphics card), 6x PCI long A. SCSI Controller for backup drives S26361-F2644-E3 SCSI Controller UW SCSI Controllers only for backup drives with LSI Chip 53C1000R In SCSI Basic Units not necessary 1 channel LVD, for internal backup drive max. 160MB/s; with cable 64/66 PCI, min 166mm, PCI standard profile int: HD68 LVD, ext: SW: max. 1x per system B. SCSI Controller for external peripheral devices S26361-F2399-E1

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide D PRIMERGY Econel30 Status 2003-10-28 Section IX Communication / Network S26361-F2643-E1 Fast Ether. Contr. 10/100TX Intel Pro 100 Server Adapter AFT under NT, W2k also with on-board LAN, WOL, load bal. 32/33 Bit PCI, min 120 mm ext: for RJ45-connector SW: VLAN, Fast Etherchannel max. 1x per system freigegeben. 2x S26361-F2730-E1 S26361-F2732-E1 S26361-F2839-E1 Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Contr. 1000SX Gigabit Ethernet Contr. 100

• Fujitsu PRIMERGY ECONEL30, System configurator and order-information guide E PRIMERGY Econel30 Status 2003-10-28 Section X Miscellaneous Section XI Country pack Power cord for floorstand versions for following countries: 1,8 m, grey T26139-Y1740-E10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR T26139-Y1742-E10 USA, Canada T26139-Y1743-E10 Switzerland T26139-Y1744-E10 UK, IR T26139-Y1745-E10 Italy T26139-Y1746-E10 Denmark T26139-Y3850-E10 Option "no powercord" Keyboards for following countries: S26381-K397-E110 USA / international S26381-K397-E120 Germany S26381-K397-E140 France S26381-K397-E155 Sweden / Finland S26381-K397-E165 United King

• System configurator and order-information guide PRIMERGY Econel30 Status 2003-10-28 Change Report Date Order number Changes 2003-10-28 S26361-K831-V330 IDE Basic unit Celeron 2.0 , 256MB DDR-RAM PC2100 , 1x 40 GB IDE HD - no longer available 2003-10-28 S26361-F2572-E3 Tape drive SLR 60 - no longer available 2003-10-28 S26361-F2236-E3 Tape drive SLR 7 - no longer available 2003-10-

Related Products and Documents (Computer Hardware):

Comparable Devices:

Similar Resources:

• DeLOCK 89220 (20 pages) PCI Express Card > 2 x SerialGebrauchsanweisungUser manualManuel d'utilisationManual del usuarioProduct-No:89220User manual no:89220-awww.delock.comPříručka uživateleInstrukcja obsługi …

• NKE PROCESSOR REGATTA (55 pages) Zi de Kerandré – Rue Gutenberg – 56700 – HENNEBONT http://www.nke-marine-electronics.com . – tel : +33 (0) 297 365 685 PROCESSOR REGATTA Part number: 90-60-384 USER MANUAL AND INSTALLATION GUIDE Version V2.5 …

• SIIG DP SoundWave 5.1 PCIe (20 pages) 1DP SoundWave 5.1 PCIeQuick Installation Guide04-0631AIntroducing the DP SoundWave 5.1 PCIeThe DP SoundWave 5.1 PCIe transforms your computerinto a high-definition 5.1 channel surround sound hometheater system.Key Features and Benefits• Provides high definition 5.1 channel surroundsound• Supports 24-bit/96kHz digital and 20-bit/48kHzanalog connections� …

• Intel SBEFCM4 (36 pages) Intel® Blade Server Fibre Channel Expansion Card SBEFCM4, 4 Gbps: Installation and User’s GuideA Guide for Technically Qualified Assemblers of Intel Identified Subassemblies & ProductsOrder Number D34987-001 …

• Digital Equipment VAX 6000 Series (41 pages) VAX 6000: Installing MS65A MemoriesOrder Number EK–MS65A–UP–001This manual is intended for use by Digital customerservice engineers and self-maintenance customersinstalling MS65A memories.digital equipment corporationmaynard, massachusetts …

• FIC FIC-BT (5 pages) FIC makes Bluetooth come true! FIC-BT USB Dongle User’s Manual Document Number: BT-002 Version: 1 Date: May/2001 Copyright © First International Computer, Inc., 2000. All right reserved This manual may not, in whole or in part, be photocopied, reproduced, transcribed, translated, or transmitted in whatever form without the written c …

Comments, Questions and Opinions: