Manualios.com

Fujitsu P50XHA10US Service Manual

Fujitsu P50XHA10US Manual Online:

4.85, 1181 votes
Fujitsu P50XHA10US User Manual
Fujitsu P50XHA10US User Guide
Fujitsu P50XHA10US Online Manual

Text of Fujitsu P50XHA10US User Guide:

  • /I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display i

  • - 26 - LED lamp blinking Turn power on and check state of lamp. Not lighted. LAMP STATE Power supply PCB faulty. POWER SUPPLY STATE Check PDP Panel. Check PDP Panel. REMEDY Power turned off immediately. RED Blinks continuously. Power turned off immediately. RED Blinks once Power turned off after 10 sec. RED Check 1 Blinks twice Power turned off after 10 sec. RED Che

  • Fujitsu P50XHA10US, Is Sync. correctly ? signal input to pin le ? Is frequency of horizontal sync. and vertical sync signals within specified range ? Is input level(∗) within specified range ? Signal processing circuit faulty. Replace Main/Digital PCB Assy. Is Sync. switch signal input to pin 13 and vertical sync ∗ . . No Check input signal. No Check input signal. . . RGB input is abnormal. Power lamp: Lighted green (10 sec or more) Start Separate signal Composite signal No Ye s Ye s Ye s Sync. on green signal Ye s Ye s No No No Is RGB cable pin arrangement appropriate ? What kind of signal is output from signal source ? Is composite sync. signal input to pin 2 of

  • Fujitsu P50XHA10US, OPTICAL FILTER PLASMA DISPLAY PANEL UNIT MD-50HM5 DC/DC MAIN/DIGITAL CONNECTION 92 FAN92 FAN INLET FILTER AC LINE FILTER TERMINAL VIDEO AUDIO POWER ON/OFF SWITCH AUDIO TERMINAL M02GOG M02AF M02GOA M01CUA M02GOB M02GOC M02GD M02GOD M02GOE M02GOF Common Common Common Common LED/PHOTO AMP KEY SWITCH PHOTO AMP P50XHA10US GENERAL CONNECTION DIAGRAM - 38 -

  • Fujitsu P50XHA10US, - 2 - IMPORTANT INFORMATION WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Please use a screen saver to prevent burning of an after-image on the screen. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this unit, observe the following basic rules governing its installation, use and service. Please read these "Important Safeguards" carefu

  • Fujitsu P50XHA10US, CONTENTS IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SETTING SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 VIDEO MODE ADJUSTMENT . . . . . . . . .

  • Fujitsu P50XHA10US, /I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C term

  • Fujitsu P50XHA10US, - 35 - R6670/Vbk R6557 Label (Serial Number for Unit) Label (Panel Information) R6523 R6477/Vad TPVBK TPSC1 TPVAD TP7117/Vda TP7117/Vda TP7117/Vda TPVSET TP7117/VdaP24 connector pin 1 TPSS1 TPVe TPVSUS TPVSCN R548/PFC S701 120V/220-240V Switch R639/Vsus R545/Vda R6770/Ve Adjustment VR Location Test Point Location VR AND TEST POINT LOCATION

  • Fujitsu P50XHA10US, - 7 - SCART TERMINAL 26101418 37111519 48121620 159131721 Pin No. Input Signal 1 2 Right audio 3 4 Audio ground 5 Blue ground 6 Left audio 7 Blue Pin No. Input Signal 8 9 Green ground 10 11 Green 12 13 Red ground 14 Pin No. Input Signal 15 Red/chrominance 16 17 18 Composite video ground 19 20 Composite video/Y 21 Ground

  • Fujitsu P50XHA10US, Bottom of Display (Ex.: P42VHA10) PC As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient. To RGB output (DVI-D) To RGB output (mD-sub) To audio output To audio input To RGB1 input (DVI-D) To RGB2 input (mD-sub) - 17 -

  • Fujitsu P50XHA10US, - 34 - REPLACEMENT PARTS AND REQUIRED ADJUSTMENT Caution Preparation Quick adjustment after PCB replacement To remove PCB, wait for 1 minute after power was turned off for electrolytic capacitors to discharge. Wide------------------ Auto Input------------------ White pattern PCB Item VR Test Point Level PFC R548 P24 connector pin 1 400V ± 1V Vsus R639 TPVsus Vsus ± 1V Vda R545 TP117 74V ± 1V Vad R6477 TPVAD Vad ± 1V Vbk R6670 TPVBK Vbk ± 5V Sustain Drive PCB Ve R6829 TPVE VE ± 1V Vsus R63

  • Fujitsu P50XHA10US, To component video output To audio output To audio input To component video input To SCART output To SCART input An example of the underside of the display (with the P-TE1000E installed in the P42VHA10) An example of the underside of the display (with the P-TE1010E installed in the P42VHA10) To component video output To audio output To S-video output To video output To audio input To component video input To S-video input To video input SATELLITE TUNER Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal cable to

  • Fujitsu P50XHA10US, SETTING SIGNALS - 5 - This display can store parameter settings for eight additional signals for RGB. To do this, select the desired signal and follow "RGB MODE ADJUSTMENT" in the manual to adjust the parameters. When you finish, the settings will be automatically stored. FACTORY SET SIGNALS (RGB MODE) Main corresponding signals (RGB mode) * With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make sure that the

  • Fujitsu P50XHA10US, DVD PLAYER Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-TE1010E is installed.) If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal. To SCART output To component video output To audio output To audio input To component video input To SCART input An example of the underside of the display (with the P-TE1000E installed in the P42V

  • - 31 - 1. Data Drive (U/L) (C1) 2. Digital PCB (D2) 3. Display Panel Assy (Glass) 1. Data Drive (L/R) (C4) 2. Digital PCB (D2) 3. Display Panel Assy (Glass) Check PCB Check PCB Symptom Symptom 1. Data Drive (L/C) (C5) 2. Digital PCB (D2) 3. Display Panel Assy (Glass) 1. Data Drive (L/L) (C6) 2. Digital PCB (D2) 3. Display Panel Assy (Glass) Che

  • Fujitsu P50XHA10US, OPTICAL FILTER PLASMA DISPLAY PANEL UNIT MD-50HM5 DC/DC MAIN/DIGITAL CONNECTION 92 FAN92 FAN INLET FILTER AC LINE FILTER TERMINAL VIDEO AUDIO POWER ON/OFF SWITCH AUDIO TERMINAL M02GOG M02AF M02GOA M01CUA M02GOB M02GOC M02GD M02GOD M02GOE M02GOF Common Common Common Common LED/PHOTO AMP KEY SWITCH PHOTO AMP P50XHA10WS GENERAL CONNECTION DIAGRAM - 36 -

  • Fujitsu P50XHA10US, [MODE] Input mode selector button Power indicator lamp Remote control signal receiver Input mode selector button [MODE] Switches between picture input modes. VOL + button VOL - button Adjusts the sound volume. Wide screen selector button [WIDE] Switches the screen over to a desired wide screen. ON/OFF button Turns the power "ON" and "OFF (standby state)". (Right section) Control Panel (Right side of display) DISPLAY SECTION – FRONT This lamp shows the state of the power sup

  • Fujitsu P50XHA10US, To S-video output To component video output To video output To S-video output To component video output To video output To audio outputs To audio outputs To audio inputs To video input To component video input To S-video input To audio inputs To video input To S-video input Bottom of Display (Ex.: P42VHA10) Bottom of Display (Ex.: P42VHA10) DVD PLAYER SATELLITE TUNER Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component v

  • Fujitsu P50XHA10US, Ref.no. Description P50XHA10WS P50XHA10ES P50XHA10US Cabinet Bezel Front Top 8115002001 Bezel Front Bottom 8115003008 Electric Fan Motor 8900280003 Optical Filter 8113177008 Filter PCB 8115882009 Connection PCB 8115049006 81150490068115204009 DC/DC PCB 8115054000 I/O PCB 8115047002 Power Switch PCB 8115053003 LED/PHOTO PCB 8115051009 Main Digital PCB 8115888001 81158880018115890004 Video PCB 8115842003 8115842003 PDP Unit S141011951 Power Cord VDE 8112527002 ----------- UL.CSA ----------- ----------- ----------- 8112528009 Remote Control Unit 8114649016 Panel Glass S141011821 Data Drive (Upper Left) PCB (C1) S141011678

  • Fujitsu P50XHA10US, To S-video output To video output To audio outputs To audio inputs To S-video input To video input VCR Connect the video signal cable to either the S-video input terminal or the video input terminal. Bottom of Display (Ex.: P42VHA10) - 9 - Model : P50XHA10W/U

  • Fujitsu P50XHA10US, - 33 - EXPLANATION OF LABELS Panel Label Information M No. Vbk : Vsus : Ve : Vad MADE IN JAPAN Panel Production Date Panel Production Date For Example---------1.8.2 18 2 Year Month 9 : 1999 1 : JAN 1 : Beginning of Month(01-10th) 0 : 2000 2 : FEB 2 : Middle of Month (11-20th) 1 : 2001 3 : MAR 3 : End of Month (21-31st) 2 : 2002 9 : SEP 0 : OCT N : NOV D : DEC For Example----------- YA1450001 YA 1 4 5 0001 * MID/AUG/2001 * YA Production Line 1 Production Line No. 4 Production Period (Day) 1st Month 2 Production Year 1 : BEG (1-10) 1 : 2001 2 : MID (11-2

Related Products and Documents (Plasma TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Rose electronics CrystalView CAB-MD6M2MD6F Installation and operation manual rose-electronics/crystalview-cab-md6m2md6f-IUY.pdf 20 Nov 2023 20 0.83 Mb
2 Ricoh FV-G030B1 Operation & user’s manual ricoh/fv-g030b1-3SO.pdf 11 Dec 2023 37 0.77 Mb
3 Panasonic TXL42U2L Operating instructions manual panasonic/txl42u2l-AV9.pdf 13 May 2023 68
4 York H5CE150A50 Installation manual york/h5ce150a50-738.pdf 06 Jul 2023 16
5 Logitech 961362-0403 - Quickcam Communicate Web Camera Installation manual logitech/961362-0403-quickcam-communicate-web-camera-1FX.pdf 02 Dec 2023 24
6 TERK Technologies FM EDGE Owner's manual terk-technologies/fm-edge-JX4.pdf 16 Mar 2023 6 0.25 Mb

Similar Resources:

  • LG

    42LK520

    (128 pages)
    www.lg.comP/NO : SAC34134216 (1106-REV11)OWNER’S MANUALLED LCD TV / LCD TV / PLASMA TVPlease read this manual carefully before operating the set and retain it for future reference.LED LCD TV MODELS19LV250022LV250026LV250032LV250026LV252032LV252022LV255C26LV255CLCD TV MODELS26LK33032LK33032LK43042LK43042LK451C47LK451C32LK453C37LK453C42LK453CPLASMA TV MODELS …
  • Panasonic

    TH-C42HD18

    (98 pages)
    Quick Start Guide(See page 6-15)Guía de inicio rápido (vea la página 6-15)TQB2AA0796Operating Instructions42”/50” Class 720p Plasma HDTV(41.6/49.9 inches measured diagonally)Manual de instruccionesTelevision de alta definición de 720p y clase 42”/50” de Plasma(41,6/49,9 pulgadas medidas diagonalmente)Model No.Número de modeloTH-C42HD18TH-C50HD18 …
  • Panasonic

    TH-103PF12U

    (93 pages)
    © Panasonic Corporation 2009Unauthorized copying and distribution is a violationof law.Order Number ITD0911162CEB34 Canada: D10High Definition Plasma DisplayModel No. TH-103PF12UGPF12D ChassisTABLE OF CONTENTSPAGE PAGE1 Safety Precautions----------------------------------------------- 31.1. General Guidelines---------------------------------------- 32 Warni …
  • Samsung

    6+ series

    (474 pages)
    Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. CountryCustomer Care Centre Web SiteAUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/atBELGIUM 02-201-24-18 www.samsung.com/be (Dutch)www.samsung.com/be_fr (French)CZECH 800 - SAMSUNG (800-726786) www.sa …
  • Panasonic

    TH-42PA60A

    (162 pages)
    © 2006 Matsushita Electric Industrial Co., Ltd. Allrights reserved. Unauthorized copying anddistribution is a violation of law.TH-37PA60HTH-37PA60MTH-42PA60ATH-42PA60HTH-42PA60MTH-42PA60MTGP9DE ChassisPlasma TelevisionSpecificationsPower Source AC 220-240 V, 50 / 60 HzPower ConsumptionAverage use 232 W (37-inch)294 W (42-inch)Standby condition 0.3 WPlasma D …
  • Panasonic

    Viera TC-P42GT25

    (67 pages)
    TMQuick Start Guide See page 8-17Guía de inicio rápido vea la página 8-17Operating Instructions42”/50” Class 1080p Plasma HDTV(41.6/49.9 inches measured diagonally)Manual de instruccionesTelevisión de alta definición de 1080p y clase 42”/50” de Plasma(41,6/49,9 pulgadas medidas diagonalmente)For assistance (U.S.A./Puerto Rico), please call:1-877 …

Comments, Questions and Opinions: