Fujitsu PDS4213W-H Operation & User’s Manual

Text of Fujitsu PDS4213W-H User Guide:

• Fujitsu PDS4213W-H, E-26 ADJUSTING IMAGES (PICTURE MENU) Press MENU . The main menu screen will appear. Press or to select “PICTURE”. Each time you press or , one of the available menus appears in the following sequence: PICTURE POSITION/SIZE SOUND OTHERS Press ENTER or . The PICTURE Menu screen will appear. Press or to select “Tint”. Press ENTER or . The “Tint” adjustment screen will appear. Press or to change tint values. : More green-tinged colors : More purple-tinged colors Press MENU several times when you

• Fujitsu PDS4213W-H, E-18 WATCHING IMAGES ON THE WIDE SCREEN Information • You cannot select Auto mode when you are in Comp.video mode (video input mode). • You may not be able to watch images clearly in Auto mode, depending on the contents of the image software you use. If you experience problems, use to switch to a mode that provides the optimum screen size. * With some games, the zoom screen (with upper and lower unviewable areas) may be selected. * With some images of standard size (i.e., 4 (frame width) x 3 (frame height)), the

• Fujitsu PDS4213W-H, E-12 PART NAMES AND FUNCTIONS (Continued) Note The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Make sure that you use replace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones. POWER ON R GB VIDEO W ID E POWER OFF VOL 1 2 3 4 SHIFT MENU ENTER 1 Power ON button [POWER ON] ➝ (See P. E-16.) Turns the power ON. 2 Power OFF button [POWER OFF] ➝ (See P. E-16.) Turns the power OFF. 3 RGB input mode selector button [RGB] ➝ (See

• Fujitsu PDS4213W-H, E-7 English INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the (optionally available) stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the actual installation. See the appropriate instruction manual for more information on the installation hardware you select. To ensure proper heat radiation, provide at least as much space around the dis

• E-14 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPTACLE Make sure that the power cable’s grounding wire is grounded.

• Fujitsu PDS4213W-H, E-16 Press the main power switch at the bottom of the display. When you do so, the main power turns ON and the power indicator lamp turns red. Press on the remote control. When you do so, the power indicator lamp turns green. Press or to select a desired input mode. BASIC OPERATIONS 1 2 3 * You can also use the switches on the display’s control panel to accomplish these steps. TURNING ON THE POWER Press when the power is ON. The power indicator lamp turns red. TURNING OFF THE POWER Press to incr

• Fujitsu PDS4213W-H, E-44 CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections. Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong i

• E-11 English 0 Video input terminal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player. A Sound2 input terminal (AUDIO2 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. B External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 Ω.

• Fujitsu PDS4213W-H, E-10 1 Main power switch Press this switch when the power is OFF to turn it ON. When you do so, the power indicator lamp will become red, indicating that you can turn ON or OFF the power to the display using either the remote control or the display’s control panel. Press this switch when the power is ON to turn it OFF. 2 RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite cor

• Fujitsu PDS4213W-H, E-15 English Connection to PC POWER INPUT AUDIO2 INPUT VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO INPUT (color difference input) AUDIO1 INPUT RGB1 INPUT RS-232C RGB2 INPUT To receptacle To sound output terminal To video output terminal To S-video output terminal To color difference output terminal To display (analog RGB) output terminal To display (analog RGB) output terminal To RS-232C output terminal Connection to AV equipment To sound output terminal

• Fujitsu PDS4213W-H, E-20 HOW TO USE MENUS 1 2 3 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Press MENU . The main menu screen will appear. Press or to switch between subordinate menus. Each time you press or , one of the available menus appears. Press ENTER or . The corresponding menu screen will appear. A total of four different menus (PICTURE, POSITION/SIZE, SOUND, OTHERS) are available. You can easily distinguish between these menus as shown below. Ex.: “PICTURE” selected in the main menu screen PICTURE POSITION/SIZE SOUND

• Fujitsu PDS4213W-H, E-41 English FACTORY SETTINGS This display can store parameter settings for eight additional signals for both RGB1 and RGB2. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, images will be displayed in accordance with the settings you most recently selected. This display has been factory-set for 18 different signals as shown below. Factory-set signals (RGB1, RGB2 modes) • The dedicated graphics card is optionally availab

• Fujitsu PDS4213W-H, E-43 English Regulation ··· PDS4213W-H • UL, CSA ····· Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class A, ICES-003 Class A • CE ··············· Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN55022 1994, Class A EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS ··············· Safety: IEC950 A1/A2/A3/A4 EMC: AS/NZS 3548 Regulation ··· PDS4214W-S • U

• Fujitsu PDS4213W-H, E-38 • Minimizing phosphor burn-in (Screen saver) All modes You can use this option to move the screen position to minimize phosphor-induced “burning”. Follow the steps below. 1 Select “Screen saver” and press ENTER or . The “Screen saver” setting screen will appear. 2 Press or to select “Function”. 3 Select a desired pattern. Each time you press or , one of the available choices appears in the following sequence: Off Time Mode Off: Disables screen saver. Time: Moves the pattern every one hour. Mode: Moves the pat

• Fujitsu PDS4213W-H, English Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details. Contents USER’S MANUAL 42” WIDE PLASMA DISPLAY PDS4213W-H/PDS4214W-S Before Use • Safety Precautions ···································

• Fujitsu PDS4213W-H, E-30 ADJUSTING SOUND (SOUND MENU) Press MENU . The main menu screen will appear. Press or to select “SOUND”. Each time you press or , one of the available menus appears in the following sequence: PICTURE POSITION/SIZE SOUND OTHERS Press ENTER or . The SOUND Menu screen will appear. Press or to select “Balance”. Press or to adjust the balance. : Higher volume from the right-hand speaker : Higher volume from the left-hand speaker Press MENU several times when you finish. * Repeat steps 4 and 5 when you wish to make chang

• Fujitsu PDS4213W-H, E-3 English Power cord AC 240 V (SAA TYPE)AC 200–240 VAC 100–125 VPower supply voltage: – When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator. – Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not b

• Fujitsu PDS4213W-H, E-27 English Note Use to switch over to the normal mode before adjusting the “Dot clock” or “Clock phase”. Information * On-screen information disappears if you do not take any action for 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode Adjusting Contrast (Contrast) Any value between -30 and +30 can be selected. : Higher contrast : Lower contrast Adjusting Screen Brightness (Brightness) Any value between -60 and +60 can be se

• Fujitsu PDS4213W-H, E-33 English Setting Display Information (OSD) All modes You can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press or , one of the available choices appears in the following sequence: On Off On: Displays all information. Off: Displays only menus and error messages. Selecting Language (Language) All modes You can use this option to select the language displayed on the screen. (1) Select “Language” and press ENTER or . The “Language” selection screen will appear. (2) Press or to select your desired l

• Fujitsu PDS4213W-H, E-36 ADJUSTMENTS RELATED TO YOUR PC When images are brighter (darker) with a new PC • Adjusting brightness (White peak level calibration) R1 R2 Select the optimum dynamic range for images. To do this, you need to create a totally white screen [input 255 to each of R, G, and B] using the PC’s paint program. Then, display that screen and perform a white peak level calibration. Follow the steps below. 1 Select “White peak level calibration” and press ENTER or . The “White peak level calibration” adjustment screen will appear. 2 Press or to select one of

• Fujitsu PDS4213W-H, E-25 English Extended menu screen (Video Input Mode) Extended menu screen (RGB Input Mode) Option (1) OSD rotate (2) DPMS (3) White screen (4) Screen saver (5) Input priority (6) Audio Input (7) 3D Y/C (for Video (3.58NTSC)) (8) Studio mode (9) White peak level calibration (for RGB1, RGB2) (10) Sharpness (for RGB1, RGB2) (11) Gamma (for RGB1, RGB2) (12) Gradation (for RGB1, RGB2) (13) Vertical lines (for RGB1, RGB2) (14) Freq. scan (for RGB1, RGB2) Function Rotates on-screen text. Specifies time before DPMS starts. Selects whether to display white ove

• E-17 English SELECTING INPUT MODE Press to select a desired input mode. Each time you press , a different input mode appears. The sequence is as follows: Video S-video Comp.video Video: Displays images from equipment connected to the Video terminal. S-video: Displays images from equipment connected to the S-video terminal. Comp.video: Displays images from equ

• Fujitsu PDS4213W-H, E-40 OPTIONS Wall-mounting unit Vertical: 0° to 5° mounting angle P-42WB11 (for both vertical and horizontal) Horizontal: 0° to 15° mounting angle Hanging unit 0° to 15° mounting angle (variable) P-42CT11 Stand P-42TT11 Speaker P-42SP11 (1 set of 2 speakers) Speaker stand P-42ST11 (1 set of 2 speakers stands) Graphics board P-42GA04 * When installing an option, make sure that all installation requirements for that option—as given in the relevant instruction manual—are met. * The colors of options do not match the display colors perfectly

• Fujitsu PDS4213W-H, E-5 English HOW TO USE ACCESSORIES Cable clampers Use the supplied cable clampers to bind the display’s signal or power cables. Use them as shown in the figure when mounting the display on the wall, using the wall-mounting unit, or hanging it from the ceiling using the hanging unit. ACCESSORIES Information Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. When you run signal cables downwards When you run signal cables to the right Projections (to be fit into corresponding sections on the disp

• E-24 Option (1) OSD (2) Language (3) Monitor No. (4) Video mode (for Video, S-video) (5) Vertical sync (for Comp.video, RGB1, RGB2) (6) Clamp pulse (for Comp.video, RGB1, RGB2) (7) AGC (for Video, S-video, Comp.video) (8) Bluish white (for Video, S-video) (9) Status (10) Extended menu Function Selects whether to display information other than menus. Selects language used for m

• Fujitsu PDS4213W-H, E-23 English USING THE SOUND MENU When you finish selecting a desired option in the SOUND menu screen, use or to change the value for that option. (See P. E-30–E- 31.) Changes you make will be stored only for the selected mode. Option (1) Treble (2) Bass (3) Balance (4) Speaker Function Adjusts treble. Adjusts bass. Adjusts volume balance. Selects built-in or external speakers. Operation : Stronger treble : Weaker treble : Stronger bass : Weaker bass :Higher volume from right- hand speaker : Higher volume from left- hand speaker Use or for switching. Range -6 to +6 -6 to +6 -10 to +10 Internal (built-in speakers) External

• Fujitsu PDS4213W-H, E-22 HOW TO USE MENUS (Continued) USING THE POSITION/SIZE MENU When you finish selecting a desired option in the POSITION/SIZE menu screen, press ENTER or . When you do so, the adjustment screen for that option appears. You can use or , , and to change the value for the option. (See P. E-28–E-29.) Changes you make will be stored only for the selected mode. Option (1) Position Function Adjusts screen position. Operation Range Video, S-video Horizontal: -30 to +30 Vertical Zoom: -15 to +15 Others: -7 to +7 Comp.video: -16 to +16 RGB1, RGB2: -250 to + 250 POSITION/SIZE Menu screen “Position” adjustment screen Video, S-video: -7 to

• E-34 OTHER ADJUSTMENTS (OTHERS MENU) (Continued) Eliminating Flicker (Vertical sync) C R1 R2 Corrects the vertical synchronization signal timing to eliminate vertical flicker. Use or to specify a value between -2 and +1. Adjusting Clamp Pulse (Clamp pulse) C R1 R2 Adjusts clamp pulse in accordance with the input signal received from connected equipment. Clamp pulse is automatically se

Related Products and Documents (Flat Panel TV):

Comparable Devices:

Similar Resources:

• Sony Bravia KDL-42W674A (36 pages) D:\SONY TV\SY130021_F4 (rev-1)\4452882121_GB\GB01COV.fm4-452-882-12(1)KDL-W674A/W670A/W658A/W654A/W650A/W600A4-452-882-12(1)LCD TVOperating InstructionsKDL-42W674A / 42W670A / 42W658A / 42W654A / 42W650A / 32W674A / 32W670A / 32W658AKDL-32W654A / 32W650A / 32W600A …

• NEC X551UN (9 pages) NEC Display Solutions of America, Inc. X551UN Installation Guide 55” LCD Display Rev 1.1 www.necdisplay.com X551UN Page 1 of 9 Contents Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Requirements Pag …

• LG 42LN5400 (2 pages) TOP FEATURES:42/47/50/55/60” Full HD 1080p 120Hz LED TV LN5400 SERIES42LN5400/47LN5400/50LN5400/55LN5400/60LN5400s LEDs Full HD 1080p, 120Hzs MHL to charge, display and control your Smartphone on the big screens Keep up with fast-moving sports and entertainment with virtually no motion blur with LG’s LN5400 Full HD 1080p 120Hz LED TV Series. Featuring …

• Vizio VECO320L1A - 32" Class 720p LCD Energy Efficient HDTV (46 pages) Congratulations on the purchase of you new VECO TV, Vizio’s Eco-hugging system.You friends will be green with envy not only because of the superior quality of the look and performance, but also because it’s Earth- friendly. How? It uses 44% less energy than most models, the packaging and this manual are made from recyclable material, this manual is print …

• Philips 52PFL5605H/12 (2 pages) EN What’s in the boxDE LieferumfangFR Contenu de l'emballageNL Wat zit er in de doos?IT Contenuto della confezioneES Contenido de la cajaPT Conteúdo da embalagemDA Hvad er der i kassenSV Förpackningens innehållNO Innholdet i eskenFI Toimituksen sisältöEL RU  …

• Haier L37A8A (39 pages) Tuning menuProgram TableProgram TableRed: Del; Green: Copy; Yellow: Name; Blue: Swap001002003004005006007008009010Delete nameCopy edit nameName channel1 Press CH+/- to select the channel, 2 Press the green button on the remote control, 3 Press CH+/- button to select the channel to copy, 4 Press again the green button then press MENU button to ensure.Swap ch …

Comments, Questions and Opinions: