Fujitsu PDS4233 Operation & User’s Manual

Text of Fujitsu PDS4233 User Guide:

• Fujitsu PDS4233, 23 Function Specifies input mode of highest priority. Selects display number. Selects input signal. Specifies and displays type of input signal directly. Sets up to display white over the entire screen. Sets up Exhibition mode. Sets up whether horizontal or vertical installation. Locks the main unit button. Displays system operation status. Range Off/RGB2/RGB3/Video/ S-video/Comp.video 0 (no setup) 1/2/3/4 RGB1: Auto/VGA/WVGA/XGA/ WXGA RGB2, RGB3: Auto/VGA/WVGA/480P/ XGA/WXGA/SXGA/ SXGA + Auto/Manual On /Off(disabled) On (Exhibition mode)/ Off(disabled) Horizontal/Vertical On (Key Lock)/ Off(disabled) Disp

• Fujitsu PDS4233, 31 • FEATURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P. 32.) On Screen Menu : Can make a display setting such as OSD, Language. (See P. 32.) Input Terminal : Can make an input terminal setting such as Video Input. (See P. 33 - 34.) Others : Can make other settings. (See P. 34 - 38.) • Adjusting Dot Clock (Dot Clock) You may find that pictures blur, depending on the clock frequency of your PC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the “Do

• 9 Description of Input Terminals DVI-D terminal (RGB 1 INPUT/DVI-D) Pin No. Input signal Pin No. Input signal 1Red 9— 2 Green 10 Ground 3 Blue 11 — 4 — 12 — 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (Trans

• Fujitsu PDS4233, 10 PART NAMES AND FUNCTIONS (Continued) 1 Power ON button [POWER ON] ➝ (See P. 14.) Turns the power ON. 2 Power OFF button [POWER OFF] ➝ (See P. 14.) Turns the power OFF. 3 RGB input mode selector button [RGB] ➝ (See P. 15.) Switches between RGB input modes. 4 Video input mode selector button [VIDEO] ➝ (See P. 15.) Switches between video input modes. 5 Wide screen selector button [WIDE] ➝ (See P. 16–17.) Switches the screen over to a desired wide screen. 6 Menu button [MENU] ➝ (See P. 18–39.) Use this button to display a desired menu fo

• Fujitsu PDS4233, 20 USING THE FEATURES MENUS • FEATURES setup screen has 5 options of Adjustment, Function, On Screen Menu, Input Terminal and Others. • Options with “ ” on the right When you select an option with “ ”, press . The adjustment/setup screen for that option appears.(See P. 30–38.) You can use or on this screen to make selections or changes.Press to store. • Options with no “ ” on the right When you select an option with no “ ”, press or to make selections or changes. Press to store. (See P. 30–38.) FEATURES Menu HOW TO USE MENUS (Continued) USING THE AUDIO MENU When you finish selecting a desired option in the AUDIO menu s

• Fujitsu PDS4233, 32 • Setting Display Information (OSD) All modes You can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press , one of the available choices appears in the following sequence: On Off On : Displays all information. Off : Displays only menus and error messages. Press to store. • When rotating text (for installing the display with one of its sides facing down) Rotating text (OSD Rotate) All modes You can use this option to rotate the text. Ea

• Fujitsu PDS4233, 14 Press the main power switch at the bottom of the display. When you do so, the main power turns ON. Press on the remote control. When you do so, the power indicator lamp turns green. Press or to select a desired input mode. BASIC OPERATIONS * You can also use the switches on the display’s control panel to accomplish these steps. TURNING ON THE POWER Press when the power is ON. The power indicator lamp turns red. TURNING OFF THE POWER 1 2 3 Press to increase the volume. Press to reduce the volume. Any value between 0 and 40 can be selected. * “No Audio” appears if you press or after you have selected “No Audio” for “Audio Input”. (See P. 35.)

• Fujitsu PDS4233, 37 * On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: : Video mode, : S-video mode, : Comp.video mode, : RGB mode • Setting RGB Input Signal Compulsorily (Direct Setting) You can use this option to switch the setting for RGB input signal. Each time you press or , one of the available choices appears in the following sequence: For RGB1 mode: For RGB2.3 mode: Auto: The optimum display is obtained

• 5 ACCESSORIES Information Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. One remote control Two AA batteries One user’s manual CHECKING ACCESSORIES One power cable HANDY TIPS • Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods.

• Fujitsu PDS4233, 24 ADJUSTING PICTURES (PICTURE MENU) Press . The main menu screen will appear. Press or to select “PICTURE”. Each time you press or , one of the available menus appears in the following sequence: The PICTURE Menu screen will appear. Press or to select “Tint”. Press . The “Tint” adjustment screen will appear. Press or to change tint values. : More greenish colors : More purplish colors Press to store. Press when you finish. * Repeat steps 3, 4, 5, and 6 when you wish to make changes to other options. 1 2 * You can also use the swi

• Fujitsu PDS4233, 43 Regulation---PDS4233W • UL, CSA Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class A, ICES-003 Class A • CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN55022 1998, Class A EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS Safety: IEC60950 A1/A2/A3/A4 EMC: AS/NZS 3548 Regulation---PDS4234W • UL, CSA Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class B, ICES-003 Class B • CE Safety: EN60950 199

• 15 SELECTING INPUT MODE Press to select a desired input mode. Each time you press , a different input mode appears. The sequence is as follows: Video: Displays pictures from equipment connected to the Video terminal. S-video: Displays pictures from equipment connected to the S-video terminal. Comp.video : Displays pictures from equipment connected to the component video inp

• Fujitsu PDS4233, 18 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Press . The main menu screen will appear. Press or to switch between sub-menus. Each time you press or , one of the available menus appears. The corresponding menu screen will appear. Press or to select an option for adjustment/setup. A total of five different menus (PICTURE, POSITION/SIZE, AUDIO, FEATURES, FACTORY DEFAULT) are available. You can easily distinguish between these menus as shown below. *Press ,

• Fujitsu PDS4233, 44 Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check whether the input mode display is colored pink.Special setup may have been made. Return to original setup or initialize the User adjustment value. • Check for incorrect battery orientation. • Check for dead batteries. • Check for distance from the display. • Check whether you are pointing the remote cont

• Fujitsu PDS4233, 22 HOW TO USE MENUS (Continued) Others(1/2) Menu screen Option (1) DPMS (2) Audio Input (3) Screen Orbiter (for RGB) Function Specifies time before DPMS starts. Can specify the background color when specifying time. Selects audio input terminal. Sets up screen orbiter. Operation Display DPMS screen and press or to select an option. Use or for switching. Can specify background by setting time to other than Off. Display the “Audio Input” adjustment screen and use or to select an option. Use or to switch between available choices for the selected option. Display the “Screen Orb

• Fujitsu PDS4233, 17 Information You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema Vision size i.e., the sizes used frequently for picture software. Normal Displays pictures of normal size (i.e., a 4:3 aspect ratio). SCREEN SIZE ASPECT RATIO The following aspect ratios are available. 16:9 aspect ratio (HDTV broadcasting) 4:3 aspect ratio (VHF/UHF broadcasting, BS broadcasting) 1.85:1 aspect ratio (Vista Vision size) 2.35:1 aspect ratio (Cinema Vision size) Wide1 Displays natural-looking pictures of standard si

• Fujitsu PDS4233, Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details. Contents USER’S MANUAL 42” WIDE PLASMA DISPLAY PDS4233W/PDS4234W Before Use • Safety Precautions ·········································· 2–3 • Features ··············································�

• Fujitsu PDS4233, DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 42” PLASMA DISPLAY Model Name: PDS4234W to which this declaration relates are in conformity with the following standards; European Standards: EMC: a. EN55022 1994/A1:1995/A2:1997/A3:1998 Class B b.

• Fujitsu PDS4233, 7 PART NAMES AND FUNCTIONS Front 1 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. 44 for more information.) 2 Remote control signal receiver Receives signals from the remote control. 3 Main power switch When pressed, power indicator lamp 1 lights red, and the power can be turned on or off by the remote contro

• Fujitsu PDS4233, 8 1 External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 Ω.) *See the speaker instruction manual for more information. 2 Sound 1 input terminal (AUDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. 3 Sound 2 input terminal (AUDIO 2 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. 4 Video input terminal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player. 5 S-vide

• Fujitsu PDS4233, 25 • Adjusting Contrast (Contrast) Any value between -30 and +30 can be selected. : Higher contrast : Lower contrast Press to store. • Adjusting Screen Brightness (Brightness) Any value between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store. • Adjusting Color Darkness (Color) Any value between -60 and +60 can be selected. : Darker colors : Lighter colors Press to store. • Adjusting Tint (Tint) Any value between -30 and +30 for [ ], and -60 and +60 for [ ]

• Fujitsu PDS4233, 26 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Press . The main menu screen will appear. Press or to select “POSITION/SIZE”. Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear. Press or to select “Position”. Press . The “Position” adjustment screen will appear. Press or to select “Horizontal” values of screen position. Press . The “Horizontal” adjustment screen will appear. Press or to change horizontal values. : Moves screen to the right. : Moves screen to the left. Press to store. Press when you finish. * Repeat steps 3 to 8 when

• 19 : Increases width. : Reduces width. : Increases height. : Reduces height. Option (1) Contrast (2) Brightness (3) Color (4) Tint (5) Sharpness (6) Picture Mode (7) Color Temp. (8) User Color Temp. (9) Noise Reduction (for Video, S-video, Comp.video) Function Adjusts picture contrast. Adjusts screen brightness. Adjusts color darkness. Adjusts tint. Adjusts picture sharpness. Can set up the

• Fujitsu PDS4233, 16 WATCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio. • Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purpose

• Fujitsu PDS4233, 12 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPTACLE Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. CONNECTING THE DISPLAY TO EXTERNAL EQ

• Fujitsu PDS4233, 13 Connection to PCConnection to AV equipment POWER INPUT COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) AUDIO2 INPUT VIDEO INPUT S-VIDEO INPUT AUDIO1 INPUT RS-232C To sound output terminal To RS-232C output terminal To display (digital RGB) output terminal To S-video output terminal To video output terminal To sound output terminal To display (analog RGB) output terminal To color difference output terminal / To display (analog RGB) output term

• 40 OPTIONS Wall-mounting unit Vertical: 0° to 5° mounting angle P-42WB12 (for both vertical and horizontal) Horizontal: 0° to 15° mounting angle Hanging unit 0° to 15° mounting angle (variable) P-42CT11 Stand P-42TT33 Speaker P-42SP11 (1 set of 2 speakers) Speaker Stand P-42ST11 (1 set of 2 speakers stands) * When installing an option, make sure that all installat

Related Products and Documents (Flat Panel TV):

Comparable Devices:

Similar Resources:

• RCA HD61LPW63 (2 pages) HD61LPW6361" (Diagonal) 16x9 DLP™ HDTV w/DCR & Integrated ATSC TunerOptional Stands Shown Above & Sold SeparatelyFeatures  BenefitsDigital Light Processing™ Technology - Twice the  Displays 16.7 million colors with no burn-in worries. Contrast of Other Display Technologies SmoothPictur …

• Philips 40PFL8505K (89 pages) !!!"#$%&%#'"()*+!,&()*,-,.%'/,012)301#0)43(/15641.,/1'3##)0 /15/!"#$%&'()'*789:;<=8=>7?9:;<=8=>@A …

• NEC M40B-AV-R (1 pages) [English][Français][Español]Thank you for purchasing this large format LCD display. This model does not include a stand.The information in this User's Manual is shown with optional stand.(ST-M4046B) If a stand is required, contact the monitor dealer. Use only the stand that is recommended by the manufacturer.Merci d’avoir acheté cet écran LCD gra …

• ViewSonic CD4620 - 46" LCD Flat Panel Display (59 pages) ViewSonic®CD4620LCD Commercial DisplayModel No. : VS11915IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, whic …

• Emerson LD195EM8 7 (96 pages) WATCHING TVPREPARATION INITIAL SETTING OPTIONAL SETTINGDVD SETTING TROUBLESHOOTING INFORMATIONOPERATING DVDINTRODUCTION© 2008 Funai Electric Co., Ltd.TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.19” Digital LCD TVbuilt-in DVD PlayerOwner’s Manual LD195EM8 7 LD195EM8 2LD195EM8TMEMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKSOF EMERSO …

• LG 22LE5500 (20 pages) Information on the complete range of LG Electronics consumer productss available on our website. Whilst every care has been taken in the preparation of this catalogue, some changes may have occurred since publication. LG Electronics cannot accept responsibility for errors and omissions.The FREEVIEW service is subject to coverage. An aerial upgrade may be req …

Comments, Questions and Opinions: