Fujitsu PLASMAVISION P42HTA51E Operation & User’s Manual
|
Fujitsu PLASMAVISION P42HTA51E, E-12 BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY 1 Press OFF/ON to the left at the bottom of the display to the STD- BY state. The power lamp lights up. 2 Press on the remote control. The color of the power lamp changes from “Red” to “Green”. 3 Press , the button of the channel you want to watch, and then press or . Select TV or the picture mode to input. 4 Press when the power is ON. The color of the power lamp changes from “Green” to “Red” and the display goes into standby state. ADJUSTING THE VOLUME Adjusting the volume Press 1 to increase the volume. Press 2
E-25 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 Name Selection (Name Select) You can change the settings for indications for video inputs and RGB inputs. Video input You can change the settings for indications for the VIDEO inputs. Select the desired indication in accordance with the connected equipment. Each time E F is pressed, the setting is switched.
Fujitsu PLASMAVISION P42HTA51E, E-34 CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections. Cleaning the Screen Clean the screen gently with a soft cloth. The screen surface is fragile. Never attempt to clean it with a hard material, press on it forcefully, or tap it. Cleaning the Cabinet and Remote Control Use a soft cloth for cl
E-9 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 # < (ENTER button) Î E-18–E-29 Press to fix the entry in the ADJUSTMENT MENU. $ G (DUAL/STEREO button) Î E-15 Press to select the audio mode for stereo/dual-channel audio broadcasting. % KLMN (COLOR button) Î E-14 In the teletext broadcasting, press these but
Fujitsu PLASMAVISION P42HTA51E, E-15 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 RGB INPUT MODE 1 Press to select the input mode. The input terminal of RGB mode is as follows. • RGB1: mD-sub * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-25. CONVENIENT FUNCTIONS DISPLAY Displaying on-screen information. Press 3 . The channel or mode is indicated on the screen for 5 seconds. PICTURE MODE Press 4 . This button can be used to switch the picture mode. In the picture mode, you can switch between the set status and the fine mode. * For the picture mode settings, see “Picture Mode (P. E-20)”. PI
Fujitsu PLASMAVISION P42HTA51E, E-8 PART NAMES AND FUNCTIONS (Continued) For details, see page Î . REMOTE CONTROL (POWER button) Î E-12 Switches between Power On and Standby. (WIDE button) Î E-16 Press to switch the screen size. (TV input mode selector button) Î E-13 Press to watch terrestrial broadcastings. (Video input mode selector button) Î E-14 Press to switch through VIDEO1 to VIDEO5. (RGB input mode selector button) Î E-15 Press to switch through RGB1. . (TELETEXT input
Fujitsu PLASMAVISION P42HTA51E, E-3 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 INFORMATION • Receptacle Make sure that the power cord’s grounding wire is grounded. The plasma display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. • Have the plasma display inspected and cleaned by your dealer at regular intervals. • Do not display the same picture for a long time, because part of the screen m
E-19 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS • Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint)) 1 Press ;. The main menu screen will appear. 2 Press E or F to select “PICTURE”. Each time you press E or F, one of the
Fujitsu PLASMAVISION P42HTA51E, E-30 OPTIONS * When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met. * The colors of options do not match the display colors perfectly. * To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer before purchasing. Wall-mounting Bracket 0° to 15° mounting angle P-WB4201 (for 42” model/50” model) Ceiling unit 5° to 25° mounting angle P-CT4200 (for 42” model/50” model) Desk
Fujitsu PLASMAVISION P42HTA51E, E-2 CONTENTS INFORMATION ................................................................E-3 ACCESSORIES ....................................................................E-4 ATTACHING THE FERRITE CORES ...................................E-4 INSTALLATION ...............................................................E-5 PART NAMES AND FUNCTIONS ...................................E-6 DISPLAY SECTION – FRONT .............................................E-6 DISPLAY SECTION – BACK ................................................E-6 DISPLAY SECTION – BOTTOM ..........................................E-7 REMOTE CONTROL .........................
Fujitsu PLASMAVISION P42HTA51E, E-7 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 /I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out. *Power is still supplied to parts of the display even if the indicator lamp is off. RGB1 input terminal (RGB1 INPUTmD-sub) Connect this terminal to the output termi
Fujitsu PLASMAVISION P42HTA51E, E-28 OTHER ADJUSTMENTS (Continued) (6) Press < to store. * When the Screen Orbiter function is operated, some letters at the top, bottom, right or left of the screen may be missed. Direct Setting for RGB You can use this option to switch the setting for RGB input signal. Each time you press E or F, one of the available choices appears in the following sequence: < Auto < VGA < WVGA < 480P < XGA < WXGA < SXGA < SXGA + < [Auto]: The optimum display is obtained automatically for input signals. [Others]: The optimum resolution setting is fixed for each signal. Press < to store. * In Auto mode, the resolu
Fujitsu PLASMAVISION P42HTA51E, E-4 INFORMATION (Continued) Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. Carefully check the terminals for position and type before making any connections. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals. These ferrite cores are used to attenuate undesired signals. Attach them correctly as shown in the following illustrations. 1 big ferrite core When c
Fujitsu PLASMAVISION P42HTA51E, E-33 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 SPECIFICATIONS WIDE PLASMA DISPLAY Regulation • CE Safety: EN60065 EMC: EN55013 (CISPR13) EN55020 (CISPR20) EN55022 (CISPR22) EN55024 (CISPR24) EN61000-3-2 EN61000-3-3 Model Series Name P42HTA51E P50XTA51E Product Name P42HTA51ES b P50XTA51ES b Screen size 42” wide screen: 92.2 cm (W) x 52.2 cm (H) (106 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal) 50” wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 43.5 inch
Fujitsu PLASMAVISION P42HTA51E, E-14 BASIC OPERATIONS (Continued) WATCHING A TELETEXT BROADCASTINGS 1 Display the TV program. Press to set to TV mode. 2 Press .. This enables teletext broadcasts to be viewed. (superimposed over the TV program) The teletext broadcasting INDEX screen is received. * Whenever . is pressed, the screen switches between teletext screen superimposed over the TV program and teletext-only screen. • Displays the teletext page program. The teletext page program is displayed when 3 digit number by –
E-27 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 Auto Off-NO SIG. You can make to the standby state automatically when the no signal state continued during set up time. Press C D to select the “Time”. Press E F to select the amount of time before the standby state starts. < Off < 1 min. < 15 min. < 45 min. < 60 min. <
Fujitsu PLASMAVISION P42HTA51E, E-10 USING THE REMOTE CONTROL To prevent malfunction, do not apply any form of severe shock to the remote control. To prevent malfunction or deformation, do not allow the remote control to become wet and keep it away from hot surfaces or heating equipment. Do not clean the remote control using a cloth dampened in a volatile solvent, such as benzene or thinner. When using the remote control, be sure to point it directly at the plasma display's signal receiver. Make sure that there are no obstacles between the remote control and the plasma display's signal receiver. PUTTING BATTERIES IN THE REMOTE CONTROL (1) To remove the
Fujitsu PLASMAVISION P42HTA51E, E-23 EnglishDeutschEspañolFrançaisItalianoPortuguês 日 本 語 Póññêèé 中文 ADJUSTING AUDIO • You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-19 for the basic operation procedures. • The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes. • When the optional speaker is not installed, sound is not output. Treble Press EF to make adjustments. F: Stronger treble E: Weaker treble Press < to store. Bass Press EF to make adjustments. F:
Fujitsu PLASMAVISION P42HTA51E, E-24 OTHER ADJUSTMENTS FEATURES setup screen has the following 5 options. See Page E-19 for the basic operation procedures. [Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. [On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-24.) [Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-25.) [Channel Setting]: Can make channel settings. (See P. E-26.) [Others]: Used to make Screen Orbiter and other settings. (See P. E-27–E-28.) Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Fujitsu PLASMAVISION P42HTA51E, E-26 OTHER ADJUSTMENTS (Continued) Press C or D to select the items for setting. It is switched as shown as below. Auto Store < Manual Store < Sort Press < to proceed to the next step. Auto Store Press E or F to select the country or region, and then press <. All the channels are scanned, and only the channels that can be received are assigned to the Program Nos. * Several minutes are required to scan all the channels. To cancel the operation in progress, press ;. * See page E-32 for the selectable TV frequencies. Manual Store Press E or
Fujitsu P50XHA10US Flat Panel TV Service manual
P50XHA10US |
Fujitsu P63XHA30E Flat Panel TV Operation & user’s manual
P63XHA30E |
Fujitsu P42HHA30E Flat Panel TV Operation & user’s manual
P42HHA30E |
Samsung LE26R73BD Flat Panel TV Owner's instructions manual
LE26R73BD |
Fujitsu PLASMAVISION PDS4229W Flat Panel TV Operation & user’s manual
PLASMAVISION PDS4229W |
Toshiba Regza 37RV530U Flat Panel TV Specifications
Regza 37RV530U |
Fujitsu P42XHA58EB Flat Panel TV Specification sheet
P42XHA58EB |
Fujitsu P42HHA10A Flat Panel TV Operation & user’s manual
P42HHA10A |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | AT&T | E1113B | Quick start manual | at-t/e1113b-J61.pdf | 09 Apr 2024 | 6 | 2.98 Mb |
2 | Motorola | P7389 | Operation & user’s manual | motorola/p7389-34Z.pdf | 21 Jul 2023 | 108 | |
3 | Candy | CBL 140 | User manual manual | candy/cbl-140-3VL.pdf | 23 Aug 2022 | 17 | 0.48 Mb |
4 | American DJ | Pixel Pulse Bar | User instructions | american-dj/pixel-pulse-bar-K8U.pdf | 04 Apr 2024 | 10 | 1.03 Mb |
5 | Casio | Baby-G BG2001-4 | Operation manual | casio/baby-g-bg2001-4-JWW.pdf | 24 Aug 2022 | 4 | 0.65 Mb |
6 | Jeep | Grand Cherokee | Operation & user’s manual | jeep/grand-cherokee-3BH.pdf | 30 Dec 2022 | 158 |
Samsung
PDP-MONITOR(PLASMA DISPLAY PANEL)PS42P3STOwner’s InstructionsBefore operating the unit,please read this manual thoroughly,and retain it for future reference.ON-SCREEN MENUSPICTURE IN PICTURE (PIP)MDC (MULTIPLE DISPLAY CONTROL)Intended for Commercial Use and OperationBN68-00528A-01_ENG 2003.11.20 4:13 PM Page 1
…
PS-42P3ST(44 pages) |
Samsung
Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.Comment contacter Samsung dans le mondeSi vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.Contacte con SAMSUNG WORLDWIDESi tiene alguna pr …
LN2A620A1F(263 pages) |
Philips
Turn up your viewing experiencewith Digital Crystal Clear.Experience the superior picture quality of this excellent HD Ready TV with the latest LCD technology and Digital Crystal Clear. It's packed into a stunning design that will complement your interior.Vivid, natural and razor sharp images• HD LCD WXGA display, with a 1366 x 768p resolution• Digi …
32PFL3322(2 pages) |
Sanyo
Before connecting, operating or adjusting this product, please read the manual completely.Please keep this manual for future reference. INSTRUCTION MANUAL PDP-42XR9DAPDP TV
…
PDP-42XR9DA(39 pages) |
Vizio
Service Manual V, Inc 320A Kalmus Drive Costa Mesa, CA 92626 TEL : +714-668-0588 FAX :+714-668-9099 Top Confidential Model #: VIZIO L42HDTV10A VIZIO GV42L HDTV
…
GV42L(107 pages) |
Samsung
BN68-01981E-00LCD TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.com/registerModel Serial No. Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products, please contac …
Plasma TV 4 Series(132 pages) |
i3 International IP Camera Ax73RMPDF User Manual (@O8B1FO), i3 International Ax73RM IP Camera (Sun 09.2023) Ax73RM, 55 |
ROSIERES Oven RGM9095INROSIERES Oven Operation & user’s manual (File: rosieres-rgm9095in-operation-user-s-manual-49, Saturday 16-09-2023) RGM9095IN, 49 |
NexxTech Amplifier 4-Way Professional Broadband Signal AmplifierNexxTech Product User Manual: 4-Way Professional Broadband Signal Amplifier PDF Manual - L6564C 4-Way Professional Broadband Signal Amplifier, 2 |
Globalstar Wireless Router Sat Fi2Globalstar Wireless Router Sat Fi2 Operation & user’s manual Sat Fi2, 61 |
Lindy Computer Accessories 7058270582 (Computer Accessories ePDF Guide, #73AX56) 70582, 3 |
Panasonic Fax Machine KX-FLB751EFax Machine Operating instructions manual (Panasonic KX-FLB751E) KX-FLB751E, 86 |
Carl Martin Music Pedal Blue RangerBlue Ranger (Music Pedal ePDF User Manual, #38Q596) Blue Ranger, 2 |
Sunbeam Bread Maker BM2500Instruction/recipe booklet for Sunbeam BM2500 Bread Maker BM2500, 60 |
Aquatica Digital Digital Camera A7D 20065Aquatica Digital A7D 20065 User Manual (Operating manual), @ZD5ND5 A7D 20065, 15 |
QUBINO Measuring Instruments ZMNHXD1QUBINO ZMNHXD1 User Manual (Doc Type: Measuring Instruments Operation & user’s manual) ZMNHXD1, 59 |
Xylem Measuring Instruments WTW Turb 750 IR/TOperating manual for Xylem WTW Turb 750 IR/T Measuring Instruments WTW Turb 750 IR/T, 58 |
Grancom Multiplexer OP-4E1+ETH+32Vo#TRTG65: OP-4E1+ETH+32Vo Multiplexer Operation & user’s manual OP-4E1+ETH+32Vo, 17 |