Manualios.com

Fujitsu XG0448 Hardware Manual

Fujitsu XG0448 Manual Online:

4.15, 2075 votes
Fujitsu XG0448 User Manual
Fujitsu XG0448 User Guide
Fujitsu XG0448 Online Manual

Text of Fujitsu XG0448 User Guide:

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 19 1.1.2 Port Side • Console Port In order to set and operate the switch, use the console cable adapter and D-SUB9pin cross cable included in this package to connect to the PC. Caution The RJ45 Console Port jack is an RS-232 serial interface. Do not plug any other interface types (Ethernet) into this jack. It may cause failure of the device. • 10/100/1000BASE-T Ports 10/100/1000BASE-T Ports. These ports for connecting to Ethernet (10/100/1000BASE- T) Network Equipment. Please use Category 5 LAN cable (if 1000BASE-T, use Category 5E or above) for cabling. Precautions RJ4

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 18 1.1 Items in the Package, Descriptions and Functions Before proceeding, check all the items described below. 1.1.1 Parts List Please check that all of the following parts are included in the package. • XG0448 The XG0448 Secure Switch. • Power Cable Cable to connect the XG0448 to an AC power source. • Console cable adapter (RJ45 to Serial Adapter) Straight cable with RJ-45 to D-SUB9 Converter Adapter. • Rack Mounting Brackets (Qty 2) A metal fitting which attaches to the back side of the rack to fix the switch onto the rack. • M3 Countersunk Screws (Qty 8) Screws for fastening the

  • XG0448 Hardware Guide Chapter 2 Installation Installation 31 2.2 Installation This section describes how to install the switch. 2.2.1 Installation of the Switch The following describes how to install. Installation on 19” Rack The switch can be installed and operated in the EIA standard 19” rack. Prepare the following rack mounting components attached. • Rack Mountin

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 1 Getting Started Options 25 1.2.3 Expansion Card The following describes the available expansion card options. The optional expansion card is installed in the expansion slot on the port side of the switch. The following details the functions/behaviors of each type of expansion card. SFP+ Expansion Card • SFP+ Link/Act LEDs Indicated the link status/communication status of the SFP+ port. • SFP+ Slots Installing an SFP+ module in either SFP+ slot will allow connection to a 10GBASE-SR or 10GBASE-LR optical c

  • Fujitsu XG0448, XG0448 Hardware Guide 10 Safety Precautions About Warning Descriptions This manual contains precautions that must be taken in order to use this device safely and prevent personal injury or property damage. Please fully understand the meanings and contents of the following descriptions and symbols when reading this manual. The following symbols are used to indicate the type of warning or caution Indicates that improper use can cause severe damage to person, resulting in serious injury or death. Indicates that imp

  • Fujitsu XG0448, XG0448 Hardware Guide TA41001-7425 Issued on February, 2011 Issued by FUJITSU LIMITED • The contents may be revised without prior notice. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual. • No part of this manual may be reproduced in any form without the prior written permission of Fujitsu. • EC declaration of conformity and the technical documentation are kept at the following FUJITSU TECHNOLOGY SOLUTIONS (HOLDING) B.V. Het Kwadrant 1, 3606 AZ Maarssen, The Netherlands Highlight Towers, Mies-van-der-Rohe-Strasse 8, 80807 Munich, Ge

  • Fujitsu XG0448, XG0448 Hardware Guide 12 Indicates that improper use can cause light or moderate injury. In addition, this symbol indicates a chance of damage to this device and other connected equipment. Cautions Do not touch this device for more than one minute while it is turned on. Failure to follow this may cause low-temperature burns. Avoid looking at the light source (e.g. laser light) directly. Failure to follow this may injure your eyes. Do not stand this device vertically or stack it. Failure to follow this may cause the device to fall over causing injury, damage, or failure. Do not put objects on this device or use

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 2 Installation Connecting the Equipment 40 Precautions Cable length will be as below based on the specification of the optical fiber cable Use the appropriate cable according to the installation place. Connecting CX4 Cable Firmly install CX4 cable to CX4 expansion card port and lock the cable. Precautions • Make sure to firmly insert the cable straight from behind. • When bending the cable, make sure that the diameter of the bent cable does not become somaller than 10cm. • When pulling out the cable, make sure to

  • Fujitsu XG0448, XG0448 Hardware Guide Contents 6 2.3.4 Connecting Twisted Pair Cable / SFP+ Module / CX4 Cable ................................................................. 39 2.3.5 Plugging in the USB Memory .................................................................................................................. 41 2.4 Connecting a Setup PC ..........................................................................................................................42 2.5 Time Setting ...........................................................................................................................................45 2.6 S

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 2 Installation Requirements for Installation Environment 29 Installation Condition Check List Check the following items. Check Item Check Result Nothing is put on the switch. Vents are not obstructed. The switch is not located on the table or not stuck on another switch. The switch is not located under direct sunshine, near heating appliance, under high humidity or in a dusty area. The switch is not located on unstable places where vibrating, or tilting. “About Warning Descriptionst” has been thoroughly read (pg.10) Reference

  • Fujitsu XG0448, XG0448 Hardware Guide 16 Notes on Use Before using this device, please read the following. • Customers are required to store and maintain configuration information for the device, after the configuration is complete. The configuration information can be used by Fujitsu or Fujitsu’s certified support engineer to restore configurations in case of failure. Unless the configuration information is available, it may cause difficulties and delays for the support engineer to restore the device, Please backup the configuration information on a timely manner and alway

  • Fujitsu XG0448, Chapter 1 Getting Started This chapter lists the items that should be in the product package, and describes the names and functions of the various components. 1.1 Items in the Package, Descriptions and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 1.1.1 Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1.1.2 Port Side . . . . . . . . . . . . . . . . . . . . . . .

  • XG0448 Hardware Guide 8 Trademark Notification in This Manual Microsoft, MS-DOS, Windows, Windows NT, Windows Server and Windows Vista are registered trademarks of the Microsoft Corporation in the USA and other countries. Adobe and Reader are trademarks or registered trademarks of Adobe Systems Incorporated in the USA and other countries. Netscape is a trademark of Netscape Com

  • Fujitsu XG0448, Chapter 2 Installation This chapter describes how to install the switch and connect it to Console PC. 2.1 Requirements for Installation Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2.1.1 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2.1.2 Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2.2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Fujitsu XG0448, XG0448 Hardware Guide Index 47 Index Number 10/100/1000BASE-T Port ........................................ 19 B Bottom Surface ......................................................... 23 C CD-ROM .................................................................. 18 Check LED ............................................................... 20 Communication Software ......................................... 42 Connecting ............................................................... 35 Console cable adapter ..

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 2 Installation Connecting the Equipment 41 2.3.5 Plugging in the USB Memory USB memory can be plugged in from the interface panel of the switch. Caution Do NOT unplug out the memory stick during access. It may result in crashing setting data. Precautions It is possible to plug/unplug SFP+ module with the power on. Plug in the USB Memory Please refer to the following instructions; 1. Firmly insert the USB memory to USB port on the interface panel of the switch. Replacing the USB Memory (Unplug) Please refer to the follow instructions; 1. Make the USB port to "disable status" using the console command. 2. Check and confirm that US

  • XG0448 Hardware Guide 2 Preface You have purchased the XG0448, a compact, 48 port 1 Gigabit Ethernet layer 2 switch that achieves unsurpassed standards of high throughput and low-latency performance. This manual explains the procedures required to install your XG0448 and should be read and understood before you start using your XG0448. First edition: February 2011 This manual contains

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 2 Installation Connecting a Setup PC 44 Prepare a Setup PC Log on using the terminal software. 1. Start up the terminal software by using the set up PC. 2. Set the setting conditions to the following; Please refer to the terminal software manual for instructions on setting conditions. 3. Press [Return] key or [Enter] key. Precautions The following message may appear When pressing the [Return] key or [Enter] key. In such case, the switch is processing another job, and

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 2 Installation Installation 33 2.2.2 Installation of Extension Card The extension cards can be installed to the switch as optional. Below describes how to install each extension card. Installation of SFP+ Extension Card /CX4 Extension Card Below describes the case of SFP+ Extension card. 1. Turn off the power of the switch. Caution Do not install/uninstall the extension cards with the power on. It may cause trouble. 2. Loosen the screws on the extension slot and remove the cover panel. 3. Install the ext

  • Fujitsu XG0448, XG0448 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 22 1.1.3 Power Inlet Side • Expansion Slot An optional expansion card can be installed in the expansion slots on the port side of the switch. • Power Inlet AC power inlet for the power cable provided. • Redundant PSU Connector Connector for an external redundant power supply. Not supported. • MAC Address Label This indicates the MAC address of the switch. 1.1.4 Top Surface • Warning Label This label describes the safety measures you should take when using this product. Reference "1.2.3 Expansi

More Instructions:

DOWNLOAD

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 BK Precision 1785B Instruction manual b-k-precision/1785b-5UL.pdf 30 Jul 2022 38 0.72 Mb
2 Miele F 9212 I Operating and installation instructions miele/f-9212-i-3C4.pdf 16 Feb 2024 40
3 Abocom XP3242 Specification sheet abocom/xp3242-OMR.pdf 29 Aug 2022 2 0.15 Mb
4 Accu-Chek Aviva Advanced owner's booklet accu-chek/aviva-643.pdf 26 Mar 2024 110
5 Philips 37-LCD INTEGRATED DIGITAL FLAT HDTV PIXEL PLUS 37PF9431D - Firmware Upgrade Readme File Manual  philips/37-lcd-integrated-digital-flat-hdtv-pixel-plus-37pf9431d-firmware-upgrade-readme-file-79H.pdf 18 Nov 2023 3 0.17 Mb
6 Honeywell PC8900A Installation instructions honeywell/pc8900a-7Q7.pdf 15 Oct 2022 4 0.16 Mb

Similar Resources:

  • D-Link

    DIR-505

    (17 pages)
    Quick Installation GuideDIR-505Mobile CompanionVersion 1.20 | January 3, 2013InstallationsanleitungGuide D’installationGuía de InstalaciónGuida di InstallazioneInstallatiehandleidingInstrukcja InstalacjiInstalační PříručkaTelepítési SegédletInstallasjonsveiledningInstallationsvejledningAsennusopasInstallationsguideGuia de InstalaçãoΟδηγος …
  • Belkin

    F5D7000

    (48 pages)
    Belkin Ltd.4 Pioneer AvenueTuggerah Business ParkTuggerah, NSW 2259, Australia+61 (0) 2 4350 4600+61 (0) 2 4350 4700 faxBelkin B.V.Boeing Avenue 3331119 PH Schiphol-Rijk, The Netherlands+31 (0) 20 654 7300+31 (0) 20 654 7349 faxBelkin Tech SupportUS: 877-736-5771 800-223-5546 ext. 2263 310-898-1100 ext. 2263UK: 0845 607 77 87Australia: 1800 235 546New Zea …
  • Cisco

    3750G-12S-E - Catalyst Switch - Stackable

    (6 pages)
    Cisco Systems, Inc.All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.Page 1 of 6Product Bulletin, No. 2251New Cisco IOS Software Release 12.1(14)EA1 for Catalyst3750, 3550, 2970, 2955, 2950, and 2950-LRE Series SwitchesOverviewCisco®is pleased to announce Cisco IOS®Software updates fo …
  • NETGEAR

    FVL328 - Cable/DSL ProSafe VPN Firewall Router

    (32 pages)
    NETGEAR VPN Configuration B-1v1.0, November 2005Appendix B NETGEAR VPN ConfigurationDG834G to FVL328 This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR DG834G to a FVL328. This case study follows the VPN Consortium interoperability profile guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).Config …
  • HPE

    FlexNetwork 10500 SERIES

    (188 pages)
    HPE FlexNetwork 10500 Switch Series FCoE Configuration Guide Part number: 5200-1885a Software version: 10500-CMW710-R7557P01 Document version: 6W101-20171020 …
  • Ace Plus

    EX-G011

    (22 pages)
    EX-G011 4x4 HDMI over CAT5 Matrix with IR Control Path User Manual ACE PLUS CORP. Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231TEL: +886-2-2912-4201FAX: +886-2-2912-3164Website: www.ace-plus.com Page 1 of 22 …

Comments, Questions and Opinions: