Fujitsu Plasmavision PDS4211 Operation & User’s Manual
|
Fujitsu Plasmavision PDS4211, E-42 Model PDS4211W-H/PDS4212W-H Screen size 42" wide screen (92.0 cm (W) x 51.8 cm (H) x 105.6 cm (Diagonal)) Aspect ratio 16:9 (wide) Weight 31.5 kg Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm Power supply 100–240 VAC 50/60 Hz Power consumption 3.9 A Screen dimensions 92.0 (W) x 51.8 (H) cm Number of pixels 852 (H) x 480 (V) Display modes Video, S-video input: Normal/Auto/Wide1/Wide2/Zoom1/Zoom2 Component video input: Normal /Wide1/Wide2/Zoom1/Zoom2 RGB input: Normal/Wide/Zoom Colors 16.77 million (for each of 256 RGB gradations) Sound output 1 W + 1 W (EIAJ) S
Fujitsu Plasmavision PDS4211, E-19 English Information You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema Vision size i.e., the sizes used frequently for image software. Normal Displays images of normal size (i.e., a 4:3 aspect ratio). Auto (Video Input Mode) The screen size changes automatically in accordance with the contents of image software you use. * You cannot select this mode if you have selected the Comp.video mode for input mode. Wide1 (Vid
Fujitsu Plasmavision PDS4211, E-24 Option (1) OSD (2) Language (3) Monitor No. (4) Video mode (for Video, S-video) (5) Vertical sync (for Comp.video, RGB1, RGB2) (6) Clamp pulse (for Comp.video, RGB1, RGB2) (7) AGC (for Video, S-video, Comp.video) (8) Bluish white (for Video, S-video) (9) Status (10) Extended menu Function Selects whether to display information other than menus. Selects language used for menus. Selects display number. Selects video mode. Corrects vertical synchronization signal. Adjusts clamp pulse. Selects whether to enable AGC (auto gain control). Makes white areas appear even whiter. Displays system operat
Fujitsu Plasmavision PDS4211, E-8 SAFETY MEASURES To prevent accident and ensure safety in the event of an earthquake, fix the display securely into position as described below. FIXING THE DISPLAY TO A WALL OR PILLAR FIXING THE DISPLAY TO THE STAND You need two strong cords. Attach a bracket to each hole at the rear of the display To do this, use screw A (10 mm long) to attach safety bracket A, supplied with the display, to the hole at the rear of the display. Attach two brackets to the wall To do this, use screws B (20 mm long) to attach safety brackets B, supplied with the display, to the wa
Fujitsu Plasmavision PDS4211, E-44 CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections. Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power f
Fujitsu Plasmavision PDS4211, E-21 English PICTURE Menu screen (Video Input Mode) PICTURE Menu screen (RGB Input Mode) USING THE PICUTURE MENU When you finish selecting a desired option in the PICTURE menu screen, press or . At this time, the adjustment/setup screen for that option will appear. You can use or to change the value for the option. (See P. E-26–E-27.) Changes you make will be stored only for the selected mode. Option (1) Contrast (2) Brightness (3) Color (4) Tint (for Video, S-video, Comp.video) (5) Sharpness (for Video, S-video, Comp.video) (6) Color temp. (7) Dot clock (for RGB1, RGB2) (8) Clock phase (for RGB1, RGB2) Fu
E-35 English EXTENDED FEATURES (Extended menu) Use or on the OTHERS Menu screen to select “Extended menu”. Press or . The message screen will appear. Press or to select “Enter” and press . The “Extended menu” screen will appear. Press or to select “DPMS”. • When “ ” appears to the right of an option, you can display the adjustment screen for that
Fujitsu Plasmavision PDS4211, E-13 English PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment. Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner. EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no
Fujitsu Plasmavision PDS4211, E-29 English * On-screen information disappears if you do not take any action for 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: : Video mode, : S-video mode, : Comp.video mode, : RGB1 mode, : RGB2 mode Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. : Moves screen to the left. Vertical position (Vertical) : Moves screen up. : Moves screen down. Adjusting Screen Size (Size) Screen width (Width) : Increases wid
Fujitsu Plasmavision PDS4211, E-5 English HOW TO USE ACCESSORIES Cable clampers Use the supplied cable clampers to bind the display’s signal or power cables. Use them as shown in the figure when mounting the display on the wall, using the wall-mounting unit, or hanging it from the ceiling using the hanging unit. ACCESSORIES Information Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. When you run signal cables downwards When you run signal cables to the right Projections (to be fit into corresponding sections on the display) One connector cover Two cable clampers One remote control One strap (for remote con
E-15 English Connection to PC POWER INPUT AUDIO2 INPUT VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO INPUT (color difference input) AUDIO1 INPUT RGB1 INPUT RS-232C RGB2 INPUT To receptacle To sound output terminal To video output terminal To S-video output terminal To color difference output terminal To display (analog RGB) output terminal To display (analog RGB) output term
Fujitsu Plasmavision PDS4211, E-17 English SELECTING INPUT MODE Press to select a desired input mode. Each time you press , a different input mode appears. The sequence is as follows: Video: Displays images from equipment connected to the Video terminal. S-video: Displays images from equipment connected to the S-video terminal. Comp.video: Displays images from equipment connected to the component video input terminal. * You can switch between video input modes while you are in RGB input mode. 1 * You can also use the switches on the display’s control panel to accomplish these steps. VIDEO INPUT MODE RGB INPUT MODE S-video mode Comp.video mode Press to select a desired in
Fujitsu Plasmavision PDS4211, E-22 HOW TO USE MENUS (Continued) USING THE POSITION/SIZE MENU When you finish selecting a desired option in the POSITION/SIZE menu screen, press or . When you do so, the adjustment screen for that option appears. You can use or , , and to change the value for the option. (See P. E-28–E-29.) Changes you make will be stored only for the selected mode. Option (1) Position Function Adjusts screen position. Operation Range Video, S-video Horizontal: -30 to +30 Vertical Zoom: -15 to +15 Others: -7 to +7 Comp.video: -16 to +16 RGB1, RGB2: -250 to + 250 POSITION/SIZE Menu screen “Position” adjustment screen Video, S-video: -7 to +7
Fujitsu Plasmavision PDS4211, E-38 • Minimizing phosphor burn-in (Screen saver) All modes You can use this option to move the screen position to minimize phosphor-induced “burning”. Follow the steps below. Select “Screen saver” and press or . The “Screen saver” setting screen will appear. Press or to select “Function”. Select a desired pattern. Each time you press or , one of the available choices appears in the following sequence: Off: Disables screen saver. Time: Moves the pattern every one hour. Mode: Moves the pattern when the power is turned ON or wh
Fujitsu Plasmavision PDS4211, E-23 English USING THE SOUND MENU When you finish selecting a desired option in the SOUND menu screen, use or to change the value for that option. (See P. E-30–E- 31.) Changes you make will be stored only for the selected mode. Option (1) Treble (2) Bass (3) Balance (4) Speaker Function Adjusts treble. Adjusts bass. Adjusts volume balance. Selects built-in or external speakers. Operation : Stronger treble : Weaker treble : Stronger bass : Weaker bass :Higher volume from right- hand speaker :Higher volume from left- hand speaker Use or for switching. Range -6 to +6 -6 to +6 -10 to +10 Inte
Fujitsu Plasmavision PDS4211, E-16 Press the main power switch at the bottom of the display. When you do so, the main power turns ON and the power indicator lamp turns red. Press on the remote control. When you do so, the power indicator lamp turns green. Press or to select a desired input mode. BASIC OPERATIONS 1 2 3 * You can also use the switches on the display’s control panel to accomplish these steps. TURNING ON THE POWER Press when the power is ON. The power indicator lamp turns red. TURNING OFF THE POWER Press to increase
E-6 HANDY TIPS • Images may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen saver. This will ensure the same image or pattern is not constantly displayed for long periods. (See P. E-38–E-39.) • The display’s plasma display panel, which is built
Fujitsu Plasmavision PDS4211, E-28 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Press . The main menu screen will appear. Press or to select “POSITION/SIZE”. Each time you press or , one of the available menus appears in the following sequence: PICTURE POSITION/SIZE SOUND OTHERS Press or . The POSITION/SIZE Menu screen will appear. Press or to select “Position”. Press or . The “Position” adjustment screen will appear. Press , , , or to change position values. : Moves screen up. : Moves screen down. : Moves screen to the right. : Moves screen to the left. Press several times
Fujitsu Plasmavision PDS4211, E-10 Main power switch Press this switch when the power is OFF to turn it ON. When you do so, the power indicator lamp will become red, indicating that you can turn ON or OFF the power to the display using either the remote control or the display’s control panel. Press this switch when the power is ON to turn it OFF. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. * No RS-232C cable is supplied with the display. The type of cable
Fujitsu Plasmavision PDS4211, DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (Euro) GmbH of Werftstraße 20, D-40549 Düsseldorf, F. R. Germany Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanezawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 42” PLASMA DISPLAY Model Name: PDS4212W-H to which this declaration relates are in conformity with the following standards; European Standards: EMC: a. EN55022 1994/A1:1995/A2:1997 Class B b. EN61000-3-2 1995 c. EN61000-3-3 1995 d. EN50082-1 1997 (EN61000-4-2 1995 / EN 61000-4-3 1996 / ENV50204 1995) (EN61000-4-4 1995 / EN 61
Fujitsu Plasmavision PDS4211, E-11 English Video input terminal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player. Sound2 input terminal (AUDIO2 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 Ω.) When connecting cables L and R, attach a small ferrite core to each of the cables. (See P. E-14.) * See the speaker instruction manual for more information. Power input terminal Connect this terminal to the power cable supplied with the display. Attach a large ferrite core to the power cable near the terminal. (See P.
Fujitsu P50XHA10US TV Service manual
P50XHA10US |
Fujitsu Plasmavision P42HHA51WS TV Operation & user’s manual
Plasmavision P42HHA51WS |
Fujitsu PDS4241 TV Operation & user’s manual
PDS4241 |
Fujitsu Plasmavision PDS4203 TV Operation & user’s manual
Plasmavision PDS4203 |
Fujitsu P42VHA10W TV Operation & user’s manual
P42VHA10W |
Fujitsu PDS5001 TV Operation & user’s manual
PDS5001 |
Samsung LN40D550K1F TV Operation & user’s manual
LN40D550K1F |
Fujitsu P42HHA30WS TV Operation & user’s manual
P42HHA30WS |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Craftsman | 973.111490 | Owner's manual | craftsman/973-111490-678.pdf | 24 May 2023 | 16 | 0.66 Mb |
2 | COMPANION | COMP243 | Owner's manual | companion/comp243-99A.pdf | 31 Aug 2022 | 16 | |
3 | Westell | VersaLink 327W | Operation & user’s manual | westell/versalink-327w-4MH.pdf | 25 Feb 2023 | 33 | |
4 | Pioneer | PD-30-K/-S | Operating instructions manual | pioneer/pd-30-k-s-8NG.pdf | 26 Apr 2023 | 104 | |
5 | HP | OfficeJet Pro 6970 | Get started | hp/officejet-pro-6970-7RX.pdf | 03 Feb 2023 | 21 | |
6 | Callaway Cars | C16 Series | Brochure | callaway-cars/c16-series-R27.pdf | 03 Jan 2024 | 2 | 1.32 Mb |
Sony
Quartz-cut design brings a new edge to TV with a hint of translucent color that emphasizes the hidden gem within. Each scene in everything you watch—HD movies, 3D, sports, even YouTube™ clips—is presented with unprecedented detail and color from Sony’s exclusive X-Reality™ PRO picture engine. And lifelike motion comes via Motionow™ XR 480 tech …
Bravia KDL-47W802A(5 pages) |
Hisense
Quick Start GuideModel 100L5FBefore using the Laser Cinema, please read this guide carefully and keep it for future reference.Disclaimer: This Quick Start Guide is intended as a general guideline to help you set up your Laser Cinema. Images throughout this document are for illustrative purposes only and may differ from the actual product.
…
100L5F(26 pages) |
Philips
1CORRECTLY INCORRECTLYNote: the enclosed template can be used for general positioning only(fig. 1).Mounting to sheetrock wallNote: Bracket can only be used with standard 16" spaced wood wallstuds.Bracket must be positioned so that the bracket is fastened firmly tostuds at each end.All required hardware is included.Note: Because the Receiver Unit’ …
42FD9935(19 pages) |
JVC
SERVICE MANUALCOPYRIGHT © 2004 VICTOR COMPANY OF JAPAN, LIMITEDNo.YA0632004/3COLOUR TELEVISIONYA06320043AV-28H4BU, AV-28H4SU, AV-28H40SU, AV-28H77SK, AV-32H4BU, AV-32H4SU, AV-32H40SU, AV-32H47SU,AV-32H77SK TABLE OF CONTENTS1 PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …
AV-28H4BU(36 pages) |
Samsung
E-MANUALThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.comModel Serial No. To directly go to the page that provides instructions on how to use the manual for visually impaired users, select the Menu Learning Screen link below.“Menu Learning Screen” Link
…
QA65Q70TAWXXY(232 pages) |
Bauhn
Attach the TV standWhich plug goes where?Have you got everything?Hey!Let’s get your new TV ready to use, fast!Quick Start GuideModel: ATV65UHDG-0620Unpack the box (be gentle) and make sure all of these items are there:Unless you are wall-mounting the TV, you will need to attach its stand/legs. If you do want to wall mount the TV, see page 7 of the User Man …
ATV65UHDG-0620(2 pages) |
Crate Amplifier BV215BBV215B Brochure & specs - EMUKH9 BV215B, 4 |
Clarity Telephone XL45XL45 (Telephone ePDF Guide, #17WING) XL45, 6 |
Kenmore Dishwasher 587.15072Kenmore 587.15072 User Guide (Doc Type: Dishwasher Use and care manual) 587.15072, 21 |
Tesla Automobile S 2014Tesla Automobile Owner's manual (File: tesla-s-2014-owner-s-manual-148, 21.12.2023) S 2014, 148 |
Intel Motherboard BLKDH61BEB3Intel Motherboard Technical product specification (File: intel-blkdh61beb3-specification-88, 24/09/2023) BLKDH61BEB3, 88 |
Hitachi Projector CP-X2#5WDBT5: CP-X2 Projector Dimensional drawing CP-X2, 1 |
Xtralis Power Supply VESDA VPS-VEA-115ULVESDA VPS-VEA-115UL Installation instructions - YKFW58 VESDA VPS-VEA-115UL, 2 |
Zonet Other KVM3332KVM3332 (Other ePDF User Guide, #68885K) KVM3332, 6 |
Premium Kitchen Appliances PWC286MLSPremium Kitchen Appliances PWC286MLS Use & care manual PWC286MLS, 8 |
Samsung Cell Phone MM-A700Samsung MM-A700 Guide (Operation & user’s manual), @9OY32D MM-A700, 222 |
Siemens Hob EH6..ME3..EH6..ME3.. (Hob ePDF User Guide, #88U966) EH6..ME3.., 20 |
LG LCD TV 32LD452BLG 32LD452B User Manual (Doc Type: LCD TV Specifications) 32LD452B, 4 |