Fujitsu Plasmavision HE4VS01WH Operation & User’s Manual

Text of Fujitsu Plasmavision HE4VS01WH User Guide:

• Fujitsu Plasmavision HE4VS01WH, E-20 • Setting Exhibition Mode (Exhibition Mode) You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons. Each time you press or , one of the available choices appears in the following sequence: On Off On: Sets up Exhibition mode. Off: Sets up normal mode. Press to store. * In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed. * The setup will be cancelled when removing the power plug from the receptacle. • Horiz

• Fujitsu Plasmavision HE4VS01WH, E-18 OTHER ADJUSTMENTS (FEATURES MENU)(Continued) • Minimizing phosphor burn-in (Screen Orbiter) You can use this option to move the screen position to minimize phosphor-induced “burn-in”. Follow the steps below. (1) Select “Screen Orbiter” and press . The “Screen Orbiter” setting screen will appear. (2) Press or to select “Mode/Time”. (3) Select a desired pattern. Each time you press or , one of the available choices appears in the following sequence: Off: Disables Screen Orbiter. Time: Moves the pattern approximately e

• Fujitsu Plasmavision HE4VS01WH, E-21 English INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT) Press . The main menu screen will appear. Press or to select “FACTORY DEFAULT”. Each time you press or , one of the available menus appears in the following sequence: The FACTORY DEFAULT Menu screen will appear. Press . • Displays the message of whether to proceed with the initialization. Press or to select the Yes. Press . • The message of having completed the initialization will be displayed after initializing. Press when you finish. 1 2 * You can also use the switches on the display

• Fujitsu Plasmavision HE4VS01WH, E-16 • Selecting the settings of D-SUB Input terminal You can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears. (2) Select the signal system to receive. Each time you press or , one of the available choices appears in the following sequence: RGB-PC Decoder RGB-PC: For using RGB for PC Decoder: For using digital tuner with RGB signal input. (3) Press or to select Mask. (4) Select Decoder by FUNCTION to

• Fujitsu Plasmavision HE4VS01WH, E-6 INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select. To ensure proper heat radiation, provide at least as much space around the display as shown below. * Make sure that the display i

• E-12 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Press . The main menu screen will appear. Press or to select “POSITION/SIZE”. Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear. Press or to select “Position”. Press . The “Position” adjustment screen will appea

• Fujitsu Plasmavision HE4VS01WH, E-7 English OPTIONS Wall-mounting Bracket 0° to 15° mounting angle P-WB4201 Ceiling-mounting unit 0° to 15° mounting angle P-CT4200 Desktop Stand unit P-TT4200 *When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met. *The colors of options do not match the display colors perfectly. *To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer before purchasing. Warning To prevent injury, f

• Fujitsu Plasmavision HE4VS01WH, E-4 1 OFF/STD-BY switch OFF : The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied. STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button. 2 RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. E-2.) 3 RGB1 input terminal (RGB1 INPUT/mD-sub) Connec

• E-7 English PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment. Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner

• Fujitsu Plasmavision HE4VS01WH, E-19 English • Assigning Numbers to Displays (Monitor No.) When you use two or more displays, you can use a single remote control to control individual displays by assigning a unique number to each of the displays. Each time you press or , one of the available numbers appears in the following sequence: 0: You can normally control displays. You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4]. 1–4: Allows you to control a desired display by pressing the corresponding button (one of [SHIFT 1] through [SHIFT 4]). When you do not press any of the SHIFT butt

• E-14 OTHER ADJUSTMENTS (FEATURES MENU) Press . The main menu screen will appear. Press or to select “FEATURES”. Each time you press or , one of the available menus appears in the following sequence: The FEATURES Menu screen will appear. Press or to select "On Screen Menu". • Select a desired option for adjustment/setup from Adjustment, Function, On Scr

• Fujitsu Plasmavision HE4VS01WH, E-8 MAIN SUPPORTED SIGNALS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will delete the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s Manual (2/2) to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected. Main corresp

• Fujitsu Plasmavision HE4VS01WH, E-10 SPECIFICATION (Continued) Model P42VCA30W/P42VCA30E/P42VCA30A HE4VS01W/HE4VS01E/HE4VS01A Screen size 42" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) Weight 31 kg / 68 lbs 31.5 kg / 69.4 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm 40.7 (W) x 25.2 (H) x 3.3 (D) inch (does not include outer projections) Power supply 110-240 VAC 50/60Hz Current rating 4.1–1.9 A Number of pixels 852 (H) x 480 (V) Sound output — 2 W + 2 W (EIAJ), 8 Ω (only with video board installed) Speaker — 2-internal (only with video board installed) Operating conditions Temp

• E-11 • Setting Picture Mode (Picture Mode) Can set up the picture mode. Each time you press or , one of the available choices appears in the following sequence: Dynamic: Suitable for watching a normal motion picture.(Standard) Real: Makes a strong contrast picture. Static: Suitable for watching a still picture. Press to store. * Select Dynamic, Real or Static to sui

• Fujitsu Plasmavision HE4VS01WH, E-3 English PART NAMES AND FUNCTIONS Front 1 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Power OFF (stand-by) Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON (Please refer to E-17 of the User's Manual(2/2).) Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction.) 2 Remote control signal receiver Receives signals from the remote control. Warning If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the displa

• E-9 English SPECIFICATION Model P42HCA30W/P42HCA30E/P42HCA30A Screen size 42" wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal) Aspect ratio 16:9 (wide) Weight 29.5 kg / 65.0 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm 40.7 (W) x 25.2 (H) x 3.3 (D) inch (does not include outer projections) Power supply 110-240 VAC

• Fujitsu Plasmavision HE4VS01WH, E-2 ACCESSORIES CHECKING ACCESSORIES One remote control Two AA batteries Two user’s manuals One power cable Two ferrite cores CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making any connections. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals. Ferrite cores These ferrite cores are used to attenuate undesired signals. Two ferrite cores When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal. RS-232C Cable Fe

• Fujitsu Plasmavision HE4VS01WH, E-9 English Press . The currently selected mode will appear. Press to select a desired picture mode. Each time you press , a different picture mode appears. The sequences used are as follows: When you are in an RGB input mode * Depending on the type of signal, some aspects may not be selected. 1 2 SWITCHING BETWEEN SCREEN SIZES Normal mode Information You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema Vision size i.e., the sizes used frequently for picture

• Fujitsu Plasmavision HE4VS01WH, Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly. Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep these manuals where the user can access them readily. * Installation and removal require special expertise. Consult your product dealer for details. Contents USER’S MANUAL (1/2) (Specification and Part Names) 42” WIDE PLASMA DISPLAY P42HCA30W/P42HCA30E/P42HCA30A/ P42VCA30W/P42VCA

• Fujitsu Plasmavision HE4VS01WH, E-13 Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. : Moves screen to the left. Vertical position (Vertical) : Moves screen up. : Moves screen down. Press to store. Adjusting Screen Size (Size) Screen width (Width) : Increases width. : Reduces width. Screen height (Height) : Increases height. : Reduces height. Press to store. “Position” adjustment screen “Size” adjustment screen → → → → → → → → English * On-screen information disappe

• E-17 English OTHERS MENU • Selecting time before DPMS starts (DPMS) You can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display power management signaling”) allows the display to maintain an automatic power saving function. This function causes on-screen information to disappear until the next input operation, if the po

• Fujitsu Plasmavision HE4VS01WH, E-2 SAFETY PRECAUTIONS IMPORTANT INFORMATION WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectio

• Fujitsu Plasmavision HE4VS01WH, E-4 RECEPTACLE Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. • Have the display inspected and cleaned by your dealer at regular intervals. • Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a pro

• Fujitsu Plasmavision HE4VS01WH, E-8 Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio. • Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement. For films, try to select a mode having the

• Fujitsu Plasmavision HE4VS01WH, E-10 ADJUSTING PICTURES (PICTURE MENU) Press . The main menu screen will appear. Press or to select “PICTURE”. Each time you press or , one of the available menus appears in the following sequence: The PICTURE Menu screen will appear. Press or to select “Tint”. Press . The “Tint” adjustment screen will appear. Press or to change tint values. : More greenish tint : More purplish tint Press to store. Press when you finish. * Repeat steps 3, 4, 5, and 6 when you wish to make changes to other options. 1 2 BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]

• Fujitsu Plasmavision HE4VS01WH, E-22 Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check whether the input mode display is colored pink.Special setup may have been made. Return to original setup or initialize the User adjustment value. • Check for incorrect battery orientation. • Check for dead batteries. • Check for distance from the display. • Check whether

• Fujitsu Plasmavision HE4VS01WH, E-5 English Description of Input Terminals Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (Transmit Data) 4DTR (Data Terminal ready) 5 GND (Ground) 6 DSR (Data Set Ready) 7RTS (Request To send) 8 CTS (Clear To Send) 9 RI (Ring Indication) RS-232C terminal (RS-232C) Pin No. Input signal Pin No. Input signal 1 Red 9 — 2Green 10 Ground 3 Blue 11 — 4— 12— 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground RGB1 terminal (RGB1 INPUT/mD-sub) *Terminal layout may differ and functions may not be available with

• Fujitsu Plasmavision HE4VS01WH, Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly. Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep these manuals where the user can access them readily. * Installation and removal require special expertise. Consult your product dealer for details. Contents USER’S MANUAL (2/2) (Precautions and Adjustment Methods) WIDE PLASMA DISPLAY Page Engl

Related Products and Documents (TV):

Comparable Devices:

Similar Resources:

• Sanyo CZP2141TX (21 pages) SERVICE MANUAL,— ,.-Colour Television.Model No. CZP2141TX(New Zealand)Service Ref. No. CZP2141TX-00.+%pecificationsk>ower Source.....................AC230V. 50HzPower Consumption,.,.,.,.,,.76WTelevision System ..............B/GColour System ....................PALChannel Coverage. ...........VHF. 1 – 11UH F: 21 – 69Video IF.......................... …

• Philips 29PT6456 (2 pages) Turn up your viewing experienceThis 29" Real Flat TV uses Active Control technology to offer the best possible picture quality at all times. The viewing experience is further enhanced by Incredible Surround sound effect.Better quality images that reveal more detail• Active Control with Light Sensor optimizes picture quality• Crystal Clear improves p …

• Sanyo VPC HD700 - Xacti Camcorder - 720p (4 pages) 1USING YOUR DIGITAL CAMERA SAFELY AND CORRECTLYi Before using your camera, please read and understand these safety instructions as well as the instruction manual for your camera.i Keep all manuals in a safe place for later reference.i These safety instructions cover both the camera and its accessories. Depending on which product was purchased, the camera spe …

• Magnavox 32MD251D - 32" Lcd Hd Flat Tv (46 pages) S M A R T. V E R Y S M A R T.User ManualALTOLea su Manual de usuario y/o Guía de uso rápido primero para obtener consejos rápidos que hacen más agradable el uso de su producto Magnavox, Si usted lee sus instrucciones y todavía necesita ayuda usted puede acceder a nuestra ayuda en línea en: www.usasupport.magnavox.com o bien 1-800-705-2000 Mie …

• JVC AV-21MS16 (70 pages) INSTRUCTIONSGGT0118-001A-HAV-29MS16 AV-29SS16 AV-25MS16AV-21MS16 COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUTContentsKnowing your TV’s features .......................................................3Remote control buttons and basic functions ..............................4TV buttons and functions .................................. …

• Philips/Magnavox 13MT1431 (2 pages) TEST LEAFLET13MT143113" Color TV-• Black Matrix picture tube for better contrast• Quality Mono sound with excellent clarity• Smart Picture and Smart Sound to personalise your viewing.• Front AV Input for easier connection• Headphone Jack for convenient connection• TV Remote Control …

Comments, Questions and Opinions: