Manualios.com

Fujitsu Plasmavision PDS4221 Operation & User’s Manual

Fujitsu Plasmavision PDS4221 Manual Online:

3.1, 2146 votes
Fujitsu Plasmavision PDS4221 User Manual
Fujitsu Plasmavision PDS4221 User Guide
Fujitsu Plasmavision PDS4221 Online Manual

Text of Fujitsu Plasmavision PDS4221 User Guide:

  • Fujitsu Plasmavision PDS4221, E-36 OTHER ADJUSTMENTS (OTHERS MENU) (Continued) Eliminating Flicker (Vertical sync) C R1 R2 Corrects the vertical synchronization signal timing to eliminate vertical flicker. Use or to specify a value between -2 and +1. Adjusting Clamp Pulse (Clamp pulse) C R1 R2 Adjusts clamp pulse in accordance with the input signal received from connected equipment. Clamp pulse is automatically set at the optimal level when you do not use this option. Use or to specify a value between 0 and 8. Making White Areas Appear Even Whiter (Bluish white) V S Makes on-screen white areas appear even whiter. Each time you press or

  • Fujitsu Plasmavision PDS4221, E-29 English Note Use to switch over to the normal mode before adjusting the “Dot clock” or “Clock phase”. Information * On-screen information disappears if you do not take any action for 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode Adjusting Contrast (Contrast) Any value between -30 and +30 can be selected. : Higher contrast : Lower contrast Adjusting Screen Brightness (Brightness) Any value between -6

  • E-7 English INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the (optionally available) stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the actual installation. See the appropriate instruction manual for more i

  • Fujitsu Plasmavision PDS4221, DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (Euro) GmbH of Werftstraße 20, D-40549 Düsseldorf, F. R. Germany Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 42” PLASMA DISPLAY Model Name: PDS4222W-H / PDS4222W-S to which this declaration relates are in conformity with the following standards; European Standards: EMC: a. EN55022 1994/A1:1995/A2:1997 Class B b. EN61000-3-2 1995 c. EN61000-3-3 1995 d. EN55024 1998 (EN

  • Fujitsu Plasmavision PDS4221, E-32 ADJUSTING SOUND (SOUND MENU) Press MENU . The main menu screen will appear. Press or to select “SOUND”. Each time you press or , one of the available menus appears in the following sequence: PICTURE POSITION/SIZE SOUND OTHERS Press ENTER or . The SOUND Menu screen will appear. Press or to select “Balance”. Press or to adjust the balance. : Higher volume from the right-hand speaker : Higher volume from the left-hand speaker Press MENU several times when you finish. * Repeat steps 4 and 5 when you wish to make changes to ot

  • Fujitsu Plasmavision PDS4221, E-10 PART NAMES AND FUNCTIONS POWER POWER MODE WIDE MENU VOLUME ENTER Front 1 Power indicator lamp This lamp shows whether the main power is ON or OFF, as follows: Lit (red): Standby Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-6 for more information.) 2 Remote control signal receiver Receives signals from the remote control. 3 Main Power Switch Indicator Indicat

  • Fujitsu Plasmavision PDS4221, E-33 English * On-screen information disappears if you do not take any action for 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode Adjusting Treble (Treble) Any value between -6 and +6 can be selected. : Stronger treble : Weaker treble Adjusting Bass (Bass) Any value between -6 and +6 can be selected. : Stronger bass : Weaker bass Adjusting Volume Balance

  • Fujitsu Plasmavision PDS4221, E-2 SAFETY PRECAUTIONS FCC NOTICE • PDS4221W-H/PDS4221W-S: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inte

  • E-13 English Setting signals This display can store parameter settings for eight additional signals for both RGB1 and RGB2. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-30–E-31 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, ima

  • Fujitsu Plasmavision PDS4221, E-27 English Extended menu screen (Video Input Mode) Extended menu screen (RGB Input Mode) Option (1) OSD rotate (2) DPMS (3) White screen (4) Screen saver (5) Input priority (6) Audio Input (7) 3D Y/C (for Video (3.58NTSC)) (8) Studio mode (9) White peak level calibration (for RGB1, RGB2) (10) Sharpness (for RGB1, RGB2) (11) Gamma (for RGB1, RGB2) (12) VGA mode (for RGB1, RGB2) (13) Freq. scan (for RGB1, RGB2) Function Rotates on-screen text. Specifies time before DPMS starts. Selects whether to display white over the entire screen. Sets up screen saver. Specifies input mode of highest pri

  • Fujitsu Plasmavision PDS4221, E-9 English HOW TO USE ACCESSORIES Cable clampers Use the supplied cable clampers to bind the display’s signal or power cables. Use them as shown in the figure when mounting the display on the wall, using the wall-mounting unit, or hanging it from the ceiling using the hanging unit. ACCESSORIES Information Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. When you run signal cables downwards When you run signal cables to the right Projections (to be fit into corresponding sections on the display) One connector cover Two cable clampers One remote cont

  • E-41 English When rotating text (for installing the display with one of its sides facing down) • Rotating text (OSD rotate) All modes You can use this option to rotate the text. Each time you press or , one of the available choices appears in the following sequence: -90 Deg. Normal +90 Deg. -90 Deg.: Displays text from left to right when the display is inst

  • Fujitsu Plasmavision PDS4221, E-26 Option (1) OSD (2) Language (3) Monitor No. (4) Video mode (for Video, S-video) (5) Vertical sync (for Comp.video, RGB1, RGB2) (6) Clamp pulse (for Comp.video, RGB1, RGB2) (7) Bluish white (for Video, S-video) (8) Status (9) Extended menu Function Selects whether to display information other than menus. Selects language used for menus. Selects display number. Selects video mode. Corrects vertical synchronization signal. Adjusts clamp pulse. Makes white areas appear even whiter. Displays system operation status. Extended features (Extended menu) Operation Use or for switching. Display the “Language” selection screen and use or to select a language. Pr

  • Fujitsu Plasmavision PDS4221, E-15 English PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment. Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner. EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. USING THE REMOTE CONTROL Information The remote control may

  • Fujitsu Plasmavision PDS4221, E-39 English • Frequency scanning (Freq. scan) R1 R2 You can use this option to perform automatic frequency scanning to ensure optimum image quality. Each time you press or , one of the available choices appears in the following sequence: Auto Fix Auto: Performs automatic frequency scanning at all times for optimum image quality. Fix: Maintains the current frequency constant. SCREEN PROTECTION AND POWER SAVING The screen protection functions minimize phosphor burn-in but cannot completely eliminate it. • Selecting time before DPMS starts (DPMS) All modes You can use this option to select the amount of time before the DPMS function starts. DPM

  • Fujitsu Plasmavision PDS4221, E-12 0 Component video input terminal (COMPONENT VIDEO INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player. A S-video input terminal (S-VIDEO INPUT) Connect this terminal to the S-video output terminal of your VCR or video disk player. B Video input terminal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player. C Power input terminal Connect this terminal to the power cable supplied with the display. D Built-in speaker Produces sound received through the

  • Fujitsu Plasmavision PDS4221, E-38 ADJUSTMENTS RELATED TO YOUR PC When images are brighter (darker) with a new PC • Adjusting brightness (White peak level calibration) R1 R2 Select the optimum dynamic range for images. To do this, you need to create a totally white screen [input 255 to each of R, G, and B] using the PC’s paint program. Then, display that screen and perform a white peak level calibration. Follow the steps below. 1 Select “White peak level calibration” and press ENTER or . The “White peak level calibration” adjustment screen will appear. 2 Press or to select one of the following: Ex

  • E-24 HOW TO USE MENUS (Continued) USING THE POSITION/SIZE MENU When you finish selecting a desired option in the POSITION/SIZE menu screen, press ENTER or . When you do so, the adjustment screen for that option appears. You can use or , , and to change the value for the option. (See P. E-30–E-31.) Changes you make will be stored only for the selected mode. Option (1) Position Function

  • Fujitsu Plasmavision PDS4221, E-44 OPTIONS Wall-mounting unit Vertical: 0° to 5° mounting angle P-42WB11 (for both vertical and horizontal) Horizontal: 0° to 15° mounting angle Hanging unit 0° to 15° mounting angle (variable) P-42CT11 Stand P-42TT11 Speaker P-42SP11 (1 set of 2 speakers) Speaker stand P-42ST11 (1 set of 2 speakers stands) * When installing an option, make sure that all installation requirements for that option—as given in the relevant instruction manual—are met. * The colors of options do not match t

  • Fujitsu Plasmavision PDS4221, E-14 PART NAMES AND FUNCTIONS (Continued) Note The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Make sure that you use replace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones. POWER ON RGB VIDEO WIDE POWER OFF VOL 1 2 3 4 SHIFT MENU ENTER 1 Power ON button [POWER ON] ➝ (See P. E-18.) Turns the power ON. 2 Power OFF button [POWER OFF] ➝ (See P. E-18.) Turns the power OFF. 3 R

  • Fujitsu Plasmavision PDS4221, E-43 English Regulation ··· PDS4221W-H/PDS4221W-S • UL, CSA ····· Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class A, ICES-003 Class A • CE ··············· Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN55022 1994, A1: 1995, A2: 1997, Class A EN61000-3-2 1995, A1: 1997, A2: 1998 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS ··············· Safety: IEC6

  • Fujitsu Plasmavision PDS4221, E-34 OTHER ADJUSTMENTS (OTHERS MENU) Press MENU . The main menu screen will appear. Press or to select “OTHERS”. Each time you press or , one of the available menus appears in the following sequence: PICTURE POSITION/SIZE SOUND OTHERS Press ENTER or . The OTHERS Menu screen will appear. Press or to select “Language”. Press ENTER or . The “Language” selection screen will appear. • When “ ” appears to the right of an option, you can display the adjustment screen for that option by selecting the option and pressing ENTER or . You can then make changes or selections on that adjustment screen.

  • E-22 HOW TO USE MENUS 1 2 3 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Press MENU . The main menu screen will appear. Press or to switch between subordinate menus. Each time you press or , one of the available menus appears. Press ENTER or . The corresponding menu screen will

  • Fujitsu Plasmavision PDS4221, E-23 English PICTURE Menu screen (Video Input Mode) PICTURE Menu screen (RGB Input Mode) USING THE PICUTURE MENU When you finish selecting a desired option in the PICTURE menu screen, press ENTER or . At this time, the adjustment/setup screen for that option will appear. You can use or to change the value for the option. (See P. E-28–E-29.) Changes you make will be stored only for the selected mode. Option (1) Contrast (2) Brightness (3) Color (4) Tint (for Video, S-video, Comp.video) (5) Sharpness (for Video, S-video, Comp.video) (6) Color temp. (7) Dot clock (for RGB1, RGB2) (8) Clock phase (for

  • Fujitsu Plasmavision PDS4221, E-37 English EXTENDED FEATURES (Extended menu) Use or on the OTHERS Menu screen to select “Extended menu”. Press ENTER or . The message screen will appear. Press or to select “Enter” and press ENTER . The “Extended menu” screen will appear. Press or to select “DPMS”. • When “ ” appears to the right of an option, you can display the adjustment screen for that option by selecting the option and pressing ENTER or . You can then make changes or selections on that adjustment screen. Press or to se

  • Fujitsu Plasmavision PDS4221, E-4 FEATURES This display has a plasma display panel and is only 8.5 cm deep. With its high image quality and performance, it is perfectly suited to multimedia applications. Can receive a variety of input signals • In addition to video, S-video, and RGB1 (mD-sub Connector), RGB2 (BNC x 5 connector) signals, this display supports input of high- quality video signals such as DVD and HDTV. • The display is applicable to the following color television systems used worldwide: NTSC, PAL, SECAM, N-PAL, M-PAL, 4.43NTSC. • The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital broadcasting

Related Products and Documents (TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Hamilton Beach 31605N Instruction manual hamilton-beach/31605n-84K.pdf 03 Jan 2023 36 1.85 Mb
2 DIVERSITECH BP-46 Instruction manual diversitech/bp-46-NA2.pdf 11 Dec 2022 2
3 Swann DVR8-Net-Plus Installation manual swann/dvr8-net-plus-U76.pdf 08 Jul 2022 4
4 Canon iP90v - PIXMA Color Inkjet Printer Quick start manual canon/ip90v-pixma-color-inkjet-printer-4AV.pdf 01 Apr 2023 108 6.56 Mb
5 VALERA HOTELLO 830 Instructions for use and installation instructions valera/hotello-830-4K7.pdf 09 Jul 2022 38 2 Mb
6 Integra DTR-5.9 Instruction manual integra/dtr-5-9-E8H.pdf 10 Jul 2023 116

Similar Resources:

  • AOC

    l32wa91

    (31 pages)
    Table of Content IMPORTANT SAFETY INSTRUCTIONS ...............................................................................................1 Read before operating equipment...................................................................................................1 Compliance Information ............................................................. …
  • Philips

    50PFP5332D

    (3 pages)
    Philipswidescreen flat TV with Pixel Plus 3 HD127 cm (50")plasma integrated digital50PFP5332DTurn up your viewing experiencewith Pixel Plus 3 HDExperience the superior picture quality of this excellent Flat TV with the latest Plasma technology and Pixel Plus. It's packed into a stunning design that will complement your interior. Share music and p …
  • Toshiba

    20HLV16

    (72 pages)
    20HLV16CombinationDIGITAL VIDEODVD PlaybackUsing theTV/DVD’s FeaturesSetting upyour TV/DVDConnectingyour TV/DVDIntroductionAppendix 5X20601A(E)Cover 17/3/06, 12:22 PM1 …
  • Vizio

    VO22LF

    (72 pages)
    VIZIO VO22L FHDTV10A User Manual Version 9/9/2008 1 www.VIZIO.comDear VIZIO Customer, Congratulations on your new VIZIO VO22L FHDTV10A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will …
  • Returnstar Interactive Tech

    IQTouchScreen

    (38 pages)
    Returnstar Interactive Technology Group Co., Ltd. 1 IQTouchScreen User Manual (Hardware Part) Copyright(C) 2003-2013 Returnstar Interactive Technology Group Co., Ltd. Web: www.iqboard.net; www.recoverystar.com Tel: 0086-591-87274373 Fax: 0086-591-87274383 E-mail: [email protected]
  • LG

    RU-42PX10

    (42 pages)
    PLASMA TVSERVICE MANUALCAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.CHASSIS : RF-043AMODEL : RU-42PX10/C RU-42PX11/H CANADA : http//biz.lgservice.comUSA : http//www.lgservice.com: http//lgservice.com/techsup.htmlhttp://www.wjel.net …

Comments, Questions and Opinions: