Sharp FU-60SE-K Operation Manual

Text of Sharp FU-60SE-K User Guide:

• Sharp FU-60SE-K, TERMS OF GUARANTEE Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace- ment, of this product subject to the conditions listed below:- 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by Sharp. 2. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in the course of a business, trade

• FEATURES Cluster Ion Balance Control The unit controls the ratio of Negative clus- ter ions and Positive cluster ions depend- ing on the condition of the room. • Clean mode Approximately the same amount of Posi- tive and Negative cluster ions are dis- charged. This mode is effective for reduc- ing some airborne mold. • Ion control mode It is said that plenty of Negat

• Sharp FU-60SE-K, • Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loose. Electrical shock, short circuit and/or fire may occur as a result. • Do not damage, break, coat, forcefully bend, pull, twist, bundle, pinch or place heavy objects on the power cord. If the power cord is damaged, fire and/or electrical shock may occur as a result. • Use AC 220-240V only. Fire and/or electrical shock may occur as a result. • Do not modify. Repair and disassembly of this product are to be performed by authorized service personnel only. Fire, electrical shock and/or bodily injury may occur if

• Sharp FU-60SE-K, CAUTIONS CONCERNING THE USAGE OF THIS PRODUCT • Do not block the intake and Air Outlet. • Do not use the unit near or on hot objects, such as a stove, etc. Also, do not use the unit where it may come into contact with steam. • Do not use the unit on its side. Deformation, malfunction and/or overheating of the motor may occur as a result. • Do not install when there is generation of lampblack, such as in a kitchen. • Do not use detergent when cleaning the unit. The unit surface may become damaged or cracked. In addition, the sensors may malfunction as a result. • Do not operate the unit without the filter. It will have no purification effect. In addition, it becomes t

• Sharp FU-60SE-K, E-4 NAMES OF PARTS MAIN UNIT DISPLAY OFF timer display lamps (set using remote control) Filter lamp If the Filter lamp is lit, the Active carbon filter needs to be cleaned. AUTO operation lamp Fan level lamps CLUSTER ION LAMP Cluster ion operation is selected using the remote control. Blue light When the cluster ion operation is in Clean mode or AUTO cluster ion mode and the air in the room is dirty, this light turns on and the unit will operate in Clean mode. Green light When the cluster ion operation is in Ion control mode or AUTO cluster ion mode and the air in the room is clean, this light turns on and the

• E-5 Pollen mode operation lamp Remote control receiver MODE/ button See Page E-10 (Used to select operation modes or turn the unit off) Sensor sensitivity select switch The sensitivity of odor and dust detection can be adjusted. This setting is factory set to “Normal”. Normally, use the unit in this setting. Set the sensitivity to “High” if the sensi- tivity seems too low depending on

• Sharp FU-60SE-K, E-6 NAMES OF PARTS BACK Ion wide louver • The output direction of the purified air can be changed to the directions indicated by the arrows. • Set the output direction as desired. Handle Air Outlet Power cord Power plug ACCESSORIES Remote control (1 unit) Battery (R6(AA) battery X 2) Attached leaflet • Operation Manual SPECIFICATIONS Model Power supply Fan level adjustment Rated power Fan level Applicable floor surface Cord length Dimensions Weight Fan level operation FU-60SE-K 220-240V / 50Hz ~46 m 2 * 2.5 m 415 mm(W)x238 mm(D)x572 mm(H) 9.3 kg Max 53 W 360m 3 /hour High 16 W 197m 3 /hour Medium 6 W 95m 3 /hour Silent 4 W 43 m

• Sharp FU-60SE-K, E-7 PREPARATION INSERTING BATTERIES IN THE REMOTE CONTROL About the batteries • The battery life is about 1 year. • Replace the batteries when the remote control becomes inoperative. • Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take care of the following when handling: • When replacing the batteries, replace both batteries with new ones of the same type. (Use R6(AA) manganese batteries (2 units).) • When not using the unit or remote control for an extended period, remove the batteries.

• Sharp FU-60SE-K, Be sure to remove the power plug from the wall outlet. E-8 PREPARATION • Be sure to remove the power plug from the wall outlet. 1 1 1 2 2 Table Soft cloth Front panel Filter frame Pre-filter Filter separator Active carbon filter HEPA filter Filter frame Hook INSTALLING THE FILTERS To maintain the quality of the filters, they are installed in the main unit within plastic bags. Be sure to remove the filters from the plastic bags before using the unit. 1 Remove the filters 1 Place the unit facing up. Lay the unit on a table, etc., while making sure not to pinch the power cord on the rear of the unit. 2 Remove the Front panel. Press in the hook on th

• Sharp FU-60SE-K, E-9 outlet. 2 Install the filter 1 Remove the HEPA filter from the plastic bag and mount it within the Filter frame with the “FRONT” sign facing up. Insert so that the tabs on the HEPA filter are facing toward you. Proper operation cannot be achieved when installing the filter backwards. 2 Remove the Active carbon fil- ter from the plastic bag and mount it within the Filter frame. 3 Mount the Filter separator and Pre-filter within the Filter frame in the respective order. • Place the Filter sepa- rator so that the ribs are facing down as shown in the diagram on the right. • Insert the tabs of the Pre-filter (4 locations) in the holes o

• Plasmacluster E-10 OPERATION MAIN UNIT OPERATION Operations available with main unit • AUTO operation (fan level) • Silent operation (fan level) • Medium operation (fan level) • High operation (fan level) • Max operation (fan level) • Pollen mode operation The unit will start operation when the MODE/ button is pressed. The unit will start operati

• Sharp FU-60SE-K, Plasmacluster AUTO RESET OFF E-11 REMOTE CONTROL OPERATION Operations available with remote control • AUTO operation (fan level) • MANUAL operation (fan level) • Pollen mode operation • OFF timer setting • DISPLAY ON/OFF • Cluster ion mode selection • AUTO cluster ion mode • Clean mode • Ion control mode • Cluster ion OFF mode •To start operation, press the POWER ON/OFF button. A short beep will sound and operation will start in AUTO opera- tion (fan level). AUTO cluster ion mode is selected for cluster ion operation. •To stop operation, press the POWER ON/OFF button again. A long beep will sound and operation will stop. POWER

• Sharp FU-60SE-K, GUIDE FOR OPERATION GUIDE FOR ODOR SENSOR • In addition to odor such as cigarette smoke and pet odor, the odor sensor also responds to the following. • Insecticide, cosmetics, spray, alcohol. • Sudden changes in temperature or humidity. • When the unit is in automatic operation and cosmetics or the like are used in a closed room, it is normal for the sensor to respond by increasing the air flow. If this is not desirable, change the sensitivity of the sensor. GUIDE FOR DUST SENSOR • The dust sensor detects dust particles in ro

• CARE AND MAINTENANCE (To maintain the best performance of this product, please clean the unit periodically.) When cleaning, be sure to remove the power plug from the wall outlet. In addition, never handle the power plug with wet hands. Electrical shock and/or bodily injury may occur as a result. MAIN UNIT For soiling on the main unit and the installed floor / table surface, clean as early

• Sharp FU-60SE-K, E-14 CARE AND MAINTENANCE GUIDE FOR LIFE OF FILTERS Filter reset button RESET The filter replacement period is indicated by the Filter lamp. (The lamp will light up in about 5 years, when using the unit for 12 hours daily.) • The operation hours are saved in memory even when removing the power plug for transpor- tation to another room, etc. The Filter lamp is to be used only as a guide. If dust or odors cannot be removed easily, replace the filters. Guide for replacing the filters • HEPA filter About 5 years after opening • Active carbon filter About 5 years after opening The replacement period is subject

• Sharp FU-60SE-K, TROUBLESHOOTING Before calling for repair, check the symptoms below for possible remedies, since the problem may not be a malfunction of the unit. SYMPTOM REMEDY (not a malfunction) The remote control does not work • Have the batteries been depleted? • Are the batteries inserted correctly? • Is a fluorescent lighting in the room flickering due to service life? (Refer to E-3,E-7) Odor and dust cannot be re- moved easily • Are the filters heavily soiled? (Refer to E-14) The CLEAN-SIGN lamp lights green even when the air is dirty • Is

Related Products and Documents (Air Cleaner):

Comparable Devices:

Similar Resources:

• Delta 50-875 Type II (32 pages) 50-875 Type IIPurificador de aire ambiental de 3 velocidades con filtro con plieguesSystème de filtration de l’air ambiant à 3 vitesses avec filtre plisséInstruction manualManuel d’utilisationManual de instruccionesFrançais (12) Español (22)INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTES DE USA …

• Pur Line FRESH AIR 40 (42 pages) MANUAL DE INSTRUCCIONES USERS MANUALMANUAL D’UTILISATIONMANUAL DE UTILIZAÇÃOMANUALE D’ ISTRUZIONIANLEITUNGFRESH AIR 40 Puricador de AireAir PurierPuricateur d’airPuricador de arPuricatore d’ariaLuftreiniger006/2020 …

• Crystal Quest OZ-250 (4 pages) Crystal Quest® Ozonator OZ-250, 400, 600, 800, 2000INSTALLATION AND OPERATION GUIDEONLINE WARRANTY INFORMATIONCrystalQuest.com/warranty.htmlCopyright 2020Crystal Quest®All rights reservedMADE IN THE USA …

• Air-O-Swiss AOSU600 (2 pages) PLEASE READ FIRSTFinding the ideal location for your unit: Do not place the humidifier directly next to a heating or air vent.The unit should be placed in an elevated position, e.g. on a table, chest, etc. at least 3 ft off the floor. Keep it away from doors or win-dows.The mist outlet must not be pointed directly at plants or other objects. Keep a distan …

• Guzzanti GZ-993 (75 pages) 1ČISTIČKA VZDUCHUČISTIČKA VZDUCHUOCZYSZCZACZ POWIETRZALÉGTISZTÍTÓČISTILEC ZRAKALUFTREINIGERAIR PURIFIERSISKHPLCZNávod k obsluzeNávod na obsluhuInstrukcja obsługiHasználati útmutatóNavodila za uporaboGebrauchsanleitung Instruction manualENDEGZ-993 …

• NuvoMed FSP-1/0804 (10 pages) 1 Floor Standing Air Purifier with HEPA & Active Carbon Filter ITEM: FSP-1/0804 INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE …

Comments, Questions and Opinions: