Sharp AR-C172M Operation Manual
|
Sharp AR-C172M, CONTENTS 0-6 CHAPTER 4 BEFORE MAKING COPIES PART NAMES AND FUNCTIONS (The Reversing Single Pass Feeder).................................................................. 4-2 ● Exterior ..................................................................... 4-2 ● Operation Panel........................................................ 4-3 ● Touch Panel (main screen of copy mode)................ 4-4 REVERSING SINGLE PASS FEEDER.......................... 4-5 ● Acceptable originals.................................................. 4-5 SETTING ORIGINALS .......
IMAGE EDIT MENU 6-21 6 A3 (11" x 17") Full-bleed In other copy modes, image loss will occur along the copy edges. When the A3 (11" x 17") FULL-BLEED function is used, the full image of an A3 (11" x 17") size original will be copied onto A3W (12" x 18") size copy paper. The A3 (11" x 17") FULL-BLEED function can only be used when the o
Sharp AR-C172M, 8-5 8 INDEX [#/P] key ................................................................. 4-3 [ ] key ................................................................... 4-3 1-sided copies ................................................. 5-2, 5-7 256 MB optional memory ....................................... 1-7 ■ ■■ ■ A A3 Full-bleed ............................................... 6-16, 6-21 ACC.#-C................................................... 1-11 to 1-12 Acceptable originals ............................................... 4-5 Account number ................................................... 1-12 Address control ....................
Sharp AR-C172M, MAIN FEATURES 1-3 1 3 Advanced image processing features based on digital technology The scanned image data is converted to digital data, enabling the following advanced image processing features: ● ●● ● Photo Repeat : Up to 24 full-size copies of a photo image can be made on a single sheet of paper (page 6-18). ● ●● ● Multi shot : Up to four original pages can be copied onto a single sheet (page 6-19). ● ●● ● Pamphlet copy* : Copies of original pages are arranged in proper order for copying so that the copies can be centre-stapled and folded into a pamphlet (page 6-24). * Pamphlet copy requires the Dup
MISFEED REMOVAL 2-22 Misfeed in the duplex bypass/inverter unit and duplex module/2 x 500 sheet paper drawer 1 Perform steps 1 and 2 of "Misfeed in the stand/1 x 500 sheet paper drawer" on the previous page. 2 Open the upper cover of the duplex bypass/inverter unit. 3 Remove the misfeed from the upper part of the duplex bypass/inverter unit. Hold the u
LARGE CAPACITY TRAY 3-17 3 Misfeed in the large capacity tray When a misfeed occurs in the large capacity tray, remove the misfed paper, following the procedure below. 1 While holding the tray release lever, carefully slide the large capacity tray away from the main unit until it stops. 2 Remove any misfed paper from the main unit and the large capacity tray. If the misfed paper is stuck inside th
Sharp AR-C172M, PART NAMES AND FUNCTIONS (The Reversing Single Pass Feeder) 4-4 Touch Panel (main screen of copy mode) The main screen of copy mode shows messages and keys necessary for copying and settings that can be selected. Touch a key to make a selection. The main screen of the copy mode will be displayed when the [COPY] key is pressed.* Message display Basic status messages are displayed here. [INTERRUPT] key display area When interrupt copy is available, the [INTERRUPT] key will be displayed here. When an interrupt copy job is being run, a [CANCEL] key will be displayed here to be used for cancelling the interrupt copy job. Copy quantity display Displays the selected numbe
Sharp AR-C172M, 0-1 OPERATION MANUALS The following operation manuals are provided for the machine. Please read the appropriate manuals as needed for the features you wish to learn about. ● ●● ● Operation manual (for general information and copier operation) (this manual): The first half of this manual provides general information about the machine, including safety information, loading paper, removing misfeeds, and regular maintenance. The second half of the manual explains how to use the copy functions. ● ●● ● Key operator's guide: This primarily explains key operator programs for machine management and copier related functions. Key operator programs for the printer, the
Sharp AR-C172M, INDEX 8-7 8 Postcards ............................................2-4 to 2-6, 5-17 Postcards with a coated front............................... 2-10 Power switch .......................................................... 1-4 Preheat mode......................................................... 1-3 Preset reduction/enlargement ratios .................... 5-13 Pressure adjusting levers............................. 2-6 to 2-7 Print........................................................................ 1-8 Print job ................................................................ 1-10 Printed photo........................................................ 5-10 Prio
Sharp AR-C172M, SADDLE STITCH FINISHER 3-14 Relation between print image and saddle stitch The orientation of the copy paper, original, scanned original data, and binding position selection are all interrelated. The table below shows these relationships. Same as above Orientation of original or original data Output result Page 1 Page 3 Page 2 Page 4 Page 1 & Page 2 Duplexed Page 3 & Page 4 Duplexed Right bindingLeft binding Left binding Right binding Portrait orientation printing Landscape orientation printing Page 1 Page 3 Page 2 Page 4 Same as above Page 1 & Page 2 Duplexed Page 3 & Page 4 Duplexed ApollonI
Sharp AR-C172M, IMAGE EDIT MENU 6-24 Pamphlet copy The pamphlet copy function is used to arrange copies in proper order for eventual centre-stapling and folding into a booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet. This function is convenient for arranging copies into an attractive booklet or pamphlet. [Example] Copying eight originals in the pamphlet copy mode ● Scan the originals in order from the first page to the last page. The order of copying will be automatically adjusted by the machine. �
Sharp AR-C172M, AUDITING MODE 1-12 1 Enter your account number (5 digits) with the numeric keys. As you enter your account number, the hyphens ( ) change to asterisks ( ). If you enter an incorrect digit, press the key and re- enter the correct digit. When a correct account number is entered, the following message will appear. This does not appear if the account counter has only been set for colour copy mode. If a limit has been set by key operator program for the number of copies that can be made by the account, the remaining number that can be made is displayed. This message appears for several sec
Sharp AR-C172M, LOADING PAPER 2-10 ■ ■■ ■ More information on plain paper The following restrictions apply to plain paper. Be sure to load the paper correctly. Incorrect loading may result in skewed feeding or misfeeds. * In the large capacity tray, only A4 size paper can be used when using AB sizes, and only 8-1/2" x 11" can be used when using inch sizes. ■ ■■ ■ More information on special media that can be used The following restrictions apply to special media. The use of incorrect media may result in fusing problems (weak
Sharp AR-C172M, LARGE CAPACITY TRAY 3-16 Loading paper in the large capacity tray 1 Pull the tray out until it stops. When the tray is in operation, do not use excessive force to pull the tray out. This may damage the tray. 2 Place the paper in the centre of the paper table. The paper stack must not be higher than the indicator line (up to 3,500 sheets of SHARP standard paper (80 g/m 2 (21 lbs.)) If the paper type was changed, be sure to change the appropriate settings as explained in "Setting the paper type (except the bypass tr
Sharp AR-C172M, 7-3 7 USER MAINTENANCE (For copying) To ensure good service from this product over a long period of time, it is recommended that the following maintenance procedures be performed on a regular basis. Wipe with a clean, soft cloth. If necessary, moisten the cloth with water or a small amount of neutral detergent. When finished, wipe dry with a clean cloth. If you find that a dirty image results when a copies are made using the reversing single pass feeder, wipe the original scanning area (the area that contains the long narrow g
Sharp AR-C172M, 2-2 LOADING PAPER The message "ADD PAPER" or "OPEN TRAY AND ADD PAPER" will appear when paper runs out during operation. Follow the procedure below to load paper. Loading paper in paper tray 1 1 Pull out paper tray 1. Gently pull the tray out until it stops. 2 Load paper into the tray. Load a stack of paper no higher than the indicator line (about 500 sheets of the recommended paper for colour (80 g/m 2 or 21 lbs.), or approximately 500 sheets of SHARP standard paper (80 g/m 2 or 21 lbs.))
Sharp AR-C172M, MISFEED REMOVAL 2-20 Misfeed in the transport area, fusing area, and exit area Transport area 1 Open the upper side cover and check for a misfeed. Push the lever upward and gently open the cover. Be careful not to tear the misfed paper during removal. 2 Gently close the upper side cover. Exit area 1 Misfeed in the exit area Models with an exit tray attached to the duplex bypass/inverter unit: Gently remove the misfed paper as shown in the illustration, taking care not to tear the paper. Models wit
Sharp AR-C172M, 4-8 SELECTING THE ORIGINAL SIZE When the correct original size is not detected or the original size is not displayed, you can manually specify the original size. By causing the machine to recognize the original size, you can have the automatic ratio selection function (page 5- 12) automatically set a suitable enlargement or reduction ratio for the selected paper size. Place the original in the document feeder tray or on the document glass and then follow the steps below. 1 Touch the [ORIGINAL] key. 2 Enter the original size. If the original size is a standard s
Sharp AR-C172M, 6-1 CHAPTER 6 CONVENIENT COPY FUNCTIONS This chapter explains special-purpose functions, storing of copy settings, and other convenient functions. Please select and read sections of this chapter as needed. Page SPECIAL MODES..........................................................................................6-2 ● Common operation procedure for using the special functions...............6-3 ● Margin shift ............................................................................................6-4 ● Erase......................................................................................................6-5 ● Dual page copy ......................................
Sharp AR-C172M, 7-2 REMOVING AN ORIGINAL MISFEED Removing a misfed original from the reversing single pass feeder If an original misfeed occurs in the reversing single pass feeder, follow the steps below to remove the misfed original. Check locations A, B, and C in the diagram at left to remove the original. 1 Removing misfeeds from each location ● Check location A Open the document feeding area cover and gently remove the misfed original from the document feeder tray. Close the document feeding area cover. ● Check location B Open the reversing single pass feeder and rotate the two release rollers in the direction of the arrow to make the original feed out. Close the reve
4-2 PART NAMES AND FUNCTIONS (The Reversing Single Pass Feeder) Exterior *RSPF exit area Finished originals are output here. Document feeder tray (page 4-6) Set the originals here for automatic feeding. Original guides (page 4-6) Adjust to the size of the originals. Document feeding area cover (page 7-2) Open to remove misfed originals in this area. *RSPF right side cover (page 7-2) Open to re
Sharp AR-C172M, SPECIAL MODES 6-6 Dual page copy The dual page copy function produces separate copies of two documents placed side by side on the document glass. It is especially useful when copying books and other bound documents. [Example] Copying right and left pages of a book 1 Touch the [DUAL PAGE COPY] key on the SPECIAL MODES screen. The [DUAL PAGE COPY] key will be highlighted to indicate that the function is turned on, and the dual page copy icon ( ) will appear in the upper left of the screen. 2 Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode. 3 Place the originals on the document glass. When copying book originals: When copying
Sharp AR-C172M, REDUCTION/ENLARGEMENT/ZOOM 5-14 6 Ensure that the desired paper size has been automatically selected based on the selected copy ratio or select another size as needed. 7 Use the numeric keys to set the desired number of copies. Up to 999 can be set. If you are only making a single copy, the copy can be made with the copy number display showing "0". 8 Press the [COLOUR COPY START ( )] or [BLACK COPY START ( )] key. If you placed the original on the document glass, set the output to "Sort", you must touch the [READ-END] key after all pages of the original have been scanned. (Step 7 on page 5-8) NOTE If the auto paper select display does not appear, no
DOWNLOAD |
Sharp MX-2640N Copier Brochure & specs
MX-2640N |
Sharp AL-1000 Series Copier Service manual
AL-1000 Series |
Sharp AR-C260 Copier Color management manual
AR-C260 |
Sharp AR-122E N Copier Online manual
AR-122E N |
Sharp MX-5001N Copier Safety manual
MX-5001N |
Sharp AR-5316 Copier Operation manual
AR-5316 |
Sharp AR-M160 Copier Brochure & specs
AR-M160 |
Sharp AL-1551 Copier Operation manual
AL-1551 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Creative | ZEN STYLE | Quick start | creative/zen-style-O3E.pdf | 14 Oct 2023 | 1 | 3.7 Mb |
2 | Kenmore | OVERLOCK 385. 564180 | Owner's manual | sears/overlock-385-564180-HGZ.pdf | 26 Jan 2023 | 46 | 4.98 Mb |
3 | Sony | DSLR-A330 | Instruction manual | sony/dslr-a330-1H7.pdf | 14 Jul 2023 | 171 | 6.81 Mb |
4 | Silvercrest | RFH 1863 | User manual and service information | silvercrest/rfh-1863-2ST.pdf | 26 Sep 2022 | 26 | 1.17 Mb |
5 | Smeg | STA6248 | Instruction manual | smeg/sta6248-298.pdf | 12 Oct 2023 | 35 | 2.47 Mb |
6 | Aztech | HL109RN | Easy start manual | aztech/hl109rn-95T.pdf | 29 Mar 2023 | 1 | 0.54 Mb |
Oki
ES3640 Series MFP High-quality business color for all your communications needs.Color Multifunctional Systems:ES3640e MFP ES3640ex MFPES3640e MFP GA (Graphic Arts) ES3640ex MFP GA (Graphic Arts)
…
ES3640eMFP(8 pages) |
Savin
Operating InstructionsCOPY REFERENCERead this manual carefully before you use this product and keep it handy for futurereference.For safety, please follow the instructions in this manual.
…
25105(91 pages) |
Kyocera
INSTALLATION GUIDE FOR MAILBOXGUIDE D’INSTALLATION DE LA BOÎTE À LETTRESGUÍA DE INSTALACIÓN PARA EL BUZÓN DE CORREOINSTALLATIONSANLEITUNG FÜR MAILBOXGUIDA ALL’INSTALLAZIONE DELLA CASELLA POSTALE邮箱安装手册メールボックス設置手順書MT-710
…
KM-C2520(12 pages) |
Muratec
ENG© 2010 MURATA MACHINERY, LTD. Printed in China 2010-06Part Number: DC4-90510-60MAI Order Number: OMMFX25903301 East Plano Parkway, Suite 100Plano, Texas 75074Muratec America, Inc.http://www.muratec.com0 31981 92881 6User’s GuidePlain-paper digital Fax/Copier/Printer/ScannerPlease read this guide before operating this machine.After you finish reading …
MFX-2590(139 pages) |
Panasonic
Digital CopierModel No.DP-130/135/150Operating InstructionsBefore operating this copier, please readthese instructions completely and keep thisoperating instructions for future reference.Making CopiesMaintenanceChecking Before OperatingOthers2
…
WORKIO DP-130(28 pages) |
HP
NoticeThe information in this guide is subject to change without notice.COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FORTECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN;NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROMTHE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.This guide contains information protected by copyright. No part of …
140(144 pages) |
D-Link Other DVX-2000MS-10P - VoiceCenter IP Phone Sys 10PPDF Guide (@D8PB92), D-Link DVX-2000MS-10P - VoiceCenter IP Phone Sys 10P Other (Saturday 26-08-2023) DVX-2000MS-10P - VoiceCenter IP Phone Sys 10P, 20 |
Innovative Concepts in Entertainment Arcade Game Machines DINO DASHInnovative Concepts in Entertainment DINO DASH Manual (Doc Type: Arcade Game Machines Owner's and service manual) DINO DASH, 16 |
protech Multimeter QM1549protech QM1549 User Manual (Operation & user’s manual), @8748S4 QM1549, 16 |
Trention Systems Server MBS1000#TY22CM: MBS1000 Server Installation manual MBS1000, 21 |
Extech Instruments Multimeter MP510AMP510A (Multimeter ePDF User Manual, #CG146J) MP510A, 20 |
Sig Marine Heater P9000Sig Marine Heater Operating and installation instruction manual (File: sig-marine-p12000-heater-19, Friday 13-10-2023) P9000, 19 |
D-Link Wireless Router DWR-730#7J99GM DWR-730: D-Link Wireless Router Owner Documentation DWR-730, 60 |
JBL Speakers FSN24FSN24 Owner's manual - 87OE68 FSN24, 2 |
Thule Automobile Accessories 600600 (Automobile Accessories ePDF Manual, #1831CD) 600, 2 |
CO/Tech Saw 2502WCO/Tech Saw Original instructions manual (File: cotech-2502w-original-instructions-manual-108, Wed 01.2024) 2502W, 108 |
L-Shine Monocular LS-650L-Shine LS-650 Guide (Doc Type: Monocular Instruction manual) LS-650, 22 |
NETGEAR Network Router R6200v2Operation & user’s manual for NETGEAR R6200v2 Network Router R6200v2, 131 |