Sharp AN-WS350 Operation Manual
|
Sharp AN-WS350, RACK SOPORTE DE PIE WALL ASIDE STAND AN-WS350 AN-WS350R MODELO MODEL Please refer to pages E-1 to E-14. ENGLISH Consulte las páginas S-1 a S-14 ESPAÑOL MANUAL DE MANEJO OPERATION MANUAL ... AN-WS350_OM_FRONT.indd 1 2009-08-15 10:37:50
Sharp AN-WS350, E-1 ENGLISH Thank you for purchasing this SHARP product. Before using the product, please be sure to read this operation manual carefully. In particular, be sure to read the section “To Ensure Safe and Correct Use”. After reading the manual, keep it in a convenient location where it can be accessed at any time. Parts Please conrm that the following parts are included. WU V METAL BASE x 1 LCD TV SUPPORT (A) x 2 LCD TV SUPPORT (B) x 2 LCD U BRACKET x 1 CENTRE BAR x 1 LCD TV HOOK x 2 SOUND BAR SUPPORT x 1 SOUND BAR U BRACKET x 1 SUPPORT PLATE x 1 SCREWS M8 [50mm] x 4 ALLEN KEY M6 x 1 ALLEN KEY M8 x 1 SOUND BAR SPACER x
Sharp AN-WS350, E-2 EN To Ensure Safe and Correct Use This operation manual and the product use various displays and labels to ensure safe use. Ignoring these displays and labels and incorrectly using the product could have results as classied below. Please read the following warning symbol information before reading the rest of this section, and be sure to strictly observe all instructions. Warning: Not following these instructions could result in death or serious injury. Caution: Not following these instructions could result in injury or property damage. Meaning of symbol The symbol means something that should
Sharp AN-WS350, E-3 Assembling the Centre Bar and Metal Base Note: Installation of this unit requires 2 or more persons. P K x 2 G Step 1 Screw the Support Plate (G) to the Metal Base with 2 pieces of M6 [16mm] screws (K) rst, using the M6 Allen key (P). Step 2 Flip the Metal Base upside down. You can see the “SHARP” logo is facing upwards. AN-WS350_OM_EN.indd 3 2009-08-19 23:00:05
Sharp AN-WS350, E-4 EN Step 3 Place the Centre Bar next to the Metal Base, on top of the Support Plate (G). Step 4 From under the Metal Base, place 4 pieces of M8 [50mm] screws (H) with Spring Washers Ø8 (O). Step 5 Slowly lift the xture upwards and let it stand on the oor. Side view Ensure that the specication label is facing the oor when combining the Centre Bar and Metal Base. The screws should be tightened using Allen key M8 (Q) according to the sequence A → B → C →D as shown above. AN-WS350_OM_EN.indd 4 2009-08-19 23:00:06
Sharp AN-WS350, E-5 Assembling the Centre Bar and Metal Base (continued) Step 6 Fasten another 4 pieces of M6 [16 mm] screws (K) using M6 Allen key (P) to the Support plate as shown. Step 7 Before peeling off the masking tape securing the legs, hold the legs rmly and be careful not to be hit by them. After peeling off the tape, release the leg slowly until it fully opens out. Be careful not to pinch your ngers in the xtures. Caution: Note: When pushing the stand against the wall, the legs will bend inwards. Note: This product is designed to be located against
Sharp AN-WS350, E-6 EN Step 2 Slot in the LCD support frame to the Centre Bar as shown. Step 3 Fix the LCD Support Bar (A) with LCD U Bracket (C) using 4 pieces of M6 [16mm] screws (K) and 4 pieces of Flange Nuts (M). Use M6 Allen key (P) to fasten the screws. Step 4 Fix the LCD Support Bar (B) using 8 pieces of M6 [16mm] screws (K) and 8 pieces of Flange Nuts (M) as shown. Use M6 Allen key (P) to fasten the screws. Step 5 Screw the Support Frame to the Centre Bar using 6 pieces of M6 [16mm] screws (K). Fasten them with M6 Allen key (P). Do not hold the Support Frame at
Sharp AN-WS350, E-7 Assembling the LCD Support Frame (continued) Notes: z The LCD Support Bar is adjustable to different heights. Maximum height is 1250 mm. Minimum height is 1030 mm. z When xing the frame, make sure that all the 6 pieces of M6 [16mm] screws are fastened to it. z If adjusting to maximum height, make sure that you do not exceed the stopper. z When xing the frame to maximum height, make sure that all the 6 pieces of M6 [16mm] screws are fastened to it. Stopper Caution: Minimum height = 103
E-8 EN Assembling the glass shelf Falling prevention (optional) Fix the safety wire or chain to the wall using a wall anchor bracket which is commercially available. It is recommended to secure the xture to the wall with a safety wire or chain before attach- ing the TV to prevent it from toppling over in case of earthquake occurrence. Screw Washer Safety wire (commerci
Sharp AN-WS350, E-9 Assembling the glass shelf (continued) Step 4 Place the glass on the Glass Shelf Supports as shown. Make sure all the Glass Protector guides are inserted perfectly into the holes of the left and right Glass Shelf Supports. Notes: z The glass is made of reinforced glass, but dropping pointed objects on it or strongly hitting the surface may cause it to break. z The glass shelf is not fastened to the unit. Avoid han- dling the glass when transporting the unit, otherwise it may fall off and there is a risk of damage and injury. Hole Glass
Sharp AN-WS350, E-10 EN Assembling the Sound bar Support (optional) (continued) Step 3 K P x 4 L x 2 Step 3 Fasten the xture to the Centre Bar using 4 pieces of M6 [16mm] screws (K) with M6 Allen key (P). Step 4 Hook the sound bar to the Sound bar Support at both sides. Step 5 Fasten 2 pieces of M4 [12 mm] screws (L) to the Sound bar Support as shown using a “+” screw driver. Step 6 Use the supplied Cable Band to tie the AC adaptor of the Sound bar to the Sound bar Support. AC adaptor AN-WS350_OM_EN.indd 10 2009-08-19 23:01:51
Sharp AN-WS350, E-11 Attaching the LCD TV Hook to the LCD TV For lowerside TV Spacer xing: turn the spacer guide upwards. x 4 x 4 x 2 x 4 U D N P V Step 1 Screw the LCD TV hooks to the back of the LCD TV using 4 pieces of M6 [16 mm] screws (K) with 4 pieces of Spring Washers Ø6 (N) or 4 pieces of M8 [16 mm] screws (I) with 4 pieces of Spring Washers Ø8 (O), depending on the TV nut size as shown. Fasten them using M6 Allen key (P) or M8 Allen key (Q). Sharp shall not bear any responsibility for damages, etc., caused by the LCD colour TV falling due to insufcient in- stallation strength or improp
Sharp AN-WS350, E-12 EN Wire arrangement You can arrange and hide the cables at the back by using the sup- plied Cable Cover. Fix the Cable Cover to the Centre Bar using 3 pieces of M6 [16 mm] screws (K) as shown. Fasten them using M6 Allen key (P). Lift up the Cable Cover and insert all the cables neatly as shown. Attaching the LCD TV Hook to the LCD TV (continued) Step 2 Hook the TV to the LCD Support as shown. Note: LCD colour TVs have a viewing angle (range in which the image can be viewed correctly). The best viewing
E-13 Specied products The following products are subject to change without notice. Certain models may not be available in certain regions. There may be other models that can be used with this stand. For these models, refer to their operating instructions, or the supplied leaet to verify that the stand can be used. SHARP LCD colour TV SHARP Sound bar system
E-14 EN Specication (e) 100 mm 1021.7 mm (40 - 7/32”) 675 mm (26 - 9/16”) 470 mm (18 - 1/2”) 176 mm (6 - 15/16”) 100 mm (3 - 15/16”) 27 kg (59.52 lbs.) 60 kg (132.3 lbs.) Dimensions 500 mm 380 mm 1021.7 mm (a) Weight Stand maximum load 10 kg (22.05 lbs.) Glass shelf maximum load (b) (c) (d) 470 mm 176 mm 675 mm Front view a b c
Sharp AN-GR500H Racks & Stands Quick start manual
AN-GR500H |
Sharp AN-CM270 Racks & Stands Installation instructions manual
AN-CM270 |
Sharp AN-PR1500H Racks & Stands Quick start manual
AN-PR1500H |
Audio Technica UniPoint AT8666RSC Racks & Stands Specifications
UniPoint AT8666RSC |
Polycom Polycom VVX 500 Racks & Stands Quick reference manual
Polycom VVX 500 |
Sharp AN-80AG2 Racks & Stands Operation manual
AN-80AG2 |
ACTi PMAX-1104 Racks & Stands Installation manual
PMAX-1104 |
SilentiumPC Atlas Arm AA201 Racks & Stands Installation instructions
Atlas Arm AA201 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Cognex | In-Sight I/O Expansion Module | Installation reference | cognex/in-sight-io-expansion-module-G9D.pdf | 26 Oct 2023 | 8 | |
2 | Accusplit | 998-310 | Battery changing instructions | accusplit/998-310-C5Q.pdf | 21 Nov 2022 | 1 | 0.13 Mb |
3 | Pulsar | TCF-10B | System manual | pulsar/tcf-10b-I4W.pdf | 27 Dec 2023 | 249 | |
4 | Holtek | HT85F2270 | Manual | holtek/ht85f2270-334.pdf | 29 Jul 2023 | 225 | |
5 | Fantasia | Tau | Owner's instruction manual | fantasia/tau-54H.pdf | 20 Apr 2023 | 13 | |
6 | Panasonic | PTL795U - LCD PROJECTION | Operating instructions manual | panasonic/ptl795u-lcd-projection-1EN.pdf | 03 Jun 2023 | 53 | 0.91 Mb |
Rehabmart
ISSUED: 02-10-00 SHEET #: 024-9003-5 08-04-05Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.1 of 3Assembly Instructions - External Wall PlateIMPORTANT! Read entire instruction sheetbefore you start installation and assembly.MAXIMUM LOAD CAPACITY:175 lb (79 kg)*ModelsWSP 450, WSP 450S, WSP 450W,W …
WSP 450(3 pages) |
Midmark
English-1TP200 Rev. A© 2011 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.comApplies to Models:8013 / 8014 / 8015 / 8019 9400 / 9500 MAX-12 Special Tools:5/16” Allen WrenchIntended UseTo Mount a Midmark monitor to a wall or chase003-2584-00 Rev. AA2 (3/10/20)Midmark Monitor Wall Moun …
9A465007(8 pages) |
NewStar
FPMA-D800100mm200mm415mmmin210mm-max370mm100mmIT EN NL DE FR ES PT DK Monitor desk standMonitor bureausteunMonitor TischständerSupport moniteur de bureauSupporto da scrivania per monitorSoporte de escritorio para monitorSuporte de mesa com base para monitorBordstander skærmNO SE FI PL CS SK RO Bordstativ til skjermSkrivbordsstativ för bildskärmNäytön …
Neomounts FPMA-D800(4 pages) |
Vivo
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.https://vivo-us.com/products/mount-play1b-1SKU: MOUNT-PLAY1B-1Black Wall Mount Designed for Sonos Play 1Instruction [email protected] www.vivo-us.com 309-278-5303
…
MOUNT-PLAY1B-1(4 pages) |
StoreYourBoard
Includes: • (2) 46” Vertical Tracks & Hardware • (8) 29” Horizontal Arms & Quick-Release Pins • (4) Wall Mount Brackets • (4) Wall Mount Lag Screw & Washer Weight Limits: • Up to 100 lbs per item stored • Up to 50 lbs per hor. arm (evenly distributed) • Up to 400 lbs rack total (evenly distributed) Installation Instructions …
Omni(2 pages) |
RPS Studio
1 Year Limited Warranty. Dot Line Corp. warrants that if the accompanying product proves to bedefective to the original purchaser in material or workmanship within 1year from the original retail purchase, Dot Line Corp. will, at its option,either repair or replace same without charge (but no cash refund will bemade).What you must do to enforce the warranty: …
RS-CS920(2 pages) |
Lutron Electronics Recording Equipment QSGRJ-3PRecording Equipment Installation and operation manual (Lutron Electronics QSGRJ-3P) QSGRJ-3P, 55 |
DFI Desktop ST101-CRDesktop #JKB2WV ST101-CR, 74 |
Cuisinart Bread Maker CBK-200 - 2 lb. Convection Bread Maker#7BSKU4 CBK-200 - 2 lb. Convection Bread Maker: Cuisinart Bread Maker Owner Documentation CBK-200 - 2 lb. Convection Bread Maker, 115 |
Roland Accessory GK-2ARoland GK-2A User Manual (Owner's manual), @F75UV3 GK-2A, 22 |
eQ-3 Thermostat LeQ-3 Thermostat L Operating manual L, 104 |
IBM Server 500IBM 500 Server Service manual 500, 160 |
Planet Technology Network Hardware NVR-400Planet Technology Network Hardware NVR-400 Operation & user’s manual NVR-400, 43 |
Memphis Speaker System MKASB35Memphis Speaker System MKASB35 Product manual & installation manual MKASB35, 6 |
RocketFish Headphone RF-BTHP01RocketFish RF-BTHP01 Headphone Guía de instalación rápida RF-BTHP01, 2 |
Black Box Switch LH8050ABlack Box LH8050A Switch Specifications LH8050A, 3 |
IR-Tec Security System HomeKeeperIR-Tec HomeKeeper User Guide (Doc Type: Security System Installation & operation manual) HomeKeeper, 55 |
SWRSound Amplifier WorkingPro SeriesAmplifier #86C96J WorkingPro Series, 10 |