Manualios.com

Sharp EC-12TWT9 Operation Manual

Sharp EC-12TWT9 Manual Online:

4.8, 763 votes
Sharp EC-12TWT9 User Manual
Sharp EC-12TWT9 User Guide
Sharp EC-12TWT9 Online Manual

Text of Sharp EC-12TWT9 User Guide:

  • Sharp EC-12TWT9, SHARP OPERATION MANUAL VACUUM CLEANER Model EC-14TWT6 EC-14TAT6 EC-12TWT6 EC-12TWT4 EC-12TWT2 EC-12TXT2 EC-12SXT4B I CONTENTS PAGE I • IMPORTANT SAFETY INSTRUCTIONS...2 • PARTS IDENTIFICATION ...................... 4 • SPECIFICATIONS ................................... 4 • OPERATING INSTRUCTIONS., ............. 5 • MAINTENANCE INSTRUCTIONS .......... 8 • REPLACEMENT INSTRUCTIONS ..... 10 • BEFORE REQUESTING SERVICE ..... 14 • DESCRIPTION OF ACCESSORIES ...15 • LIMITED WARRANTY .......................... 16 Tha

  • IMPORTANT SAFETY INSTRUCTIONS When using an electrical vacuum cleaner, basic precautions should always be followed including the following: Read all instructions carefully before using this vacuum cleaner. WAR NING/Toreduce the risk of fire, electric shock, or injury: 1 Electric shock could occur if used outdoors or on wet surfaces° 2 Do not leave unattended when plugged in. Unplug fr

  • Sharp EC-12TWT9, 1 4 Use extra caution when cleaning on stairs. 15 Never handle plug, cord or vacuum cleaner with wet hands. 1 6 Do not touch the, agitator while it is rotating. 17 Do not use in presence of flammable or combustible liquids or fumes. 18 Do not place heavy objects on the vacuum cleaner. 19 Do not step, on the hose or pull the hose forcibly'. 2{) Do not pick up large objects such as waste paper or cloth which may clog the hose. 21 Do not expose this vacuum cleaner to high temperatures while operating or during sto

  • Sharp EC-12TWT9, PARTS IDENTIFICATION ( FRONT ") Power Cord __ Panel __ /1_ Power Control--_ (EC-14TWT6/ "_7-- 14TAT6/12TWT6 /Y_ only) _ Dust indicator--/ J_ (EC-14"rw'r6/ i',/'_ 14TAT6/12TWT6 _" only) j Clamp Knob .. Headlight (Except EC-12TXT2/ 12SXT4B Bumper RUG/FLOOR Selector (EC-14TWT6/14TAT6 only) ON/OFF Switch F L. REAR Cord Storage Hooks Handle Screw Carrying Handle Extension Wand and Crevice Tool Packed in the box; assemble by placing crevice tool inside wand as shown. Clip wand into place. C-q-'--'-_'_:

  • Sharp EC-12TWT9, OPERATING INSTRUCTIONS HOW TO ATTACH THE HANDLE TO VACUUM CLEANER First remove the handle screw. Then insert the base of the handle into the top of the body' of the vacuum cleaner as shown. (Fig. 1) Handle Fig.1 i , n 1 2 Line up the small hole on the handle with the small hole on the rear of the vacuum cleaner and insert the screw. (Fig. 2), Be sure the screw is tightened securely. Handle screw Fig.2 HOW TO WIND POWER CORD 1 Insert the power cord in the clip located on the upper cord storage hook as shown. (Ficj. 3) Clip

  • Sharp EC-12TWT9, OPERATING INSTRUCTIONS / / / /, ON/OFF SWITCH Ir 1 To turn on the vacuum cleaner, touch the switch on the appliance to the =ON" position. (Fig. 6) 2 To turn off the vacuum cleaner, touch the switch to the "OFF" posi- tion. (Fig. 7) Fig.6 POWER CONTROL SWITCH (EC-14TWT6/14TAT6/12TWT6 only) A slide switch allows selection of any cleaning power from low "L" to high "H". To increase the suction power, slide the switch toward the "H" position. To decrease the suction power, slide the switch toward the "L" position. (Fig. 7) Power Control Knob HIGH: Greatest suction powe_r for heavy vacuuming jobs. Medium power levels may be set between &

  • Sharp EC-12TWT9, RUG/FLOOR SELECTOR (EC-14TW'r6/14TAT6 only) The RUG / FLOOR selector should only be adjusted while the vacuum cleaner is in the "ON" and in the upright position. 1 When cleaning carpets, slide the selector to the "RUG" position. 2 When cleaning bare floors, slide the selector to the "FLOOR" position. (Fig. 9) NOTE: Make sure The RUG / FLOOR selector is set to either the extreme front or the extreme back to avoid any problems that may occur. Fig. 9 HOW TO ADJUST THE HANDLE The handle of this vacuum cleaner can be set to either of three positions-Up- right, Normal or Parallel. To release the handle, depress the pedal at t

  • Sharp EC-12TWT9, MAINTENANCE INSTRUCTIONS Unplug this vacuum cleaner from the electrical outlet before servicing. • HOW TO CHANGE THE PAPER BAG r When operating the vacuum cleaner, always use genuine Sharp TWIN PLY TM Micro -_ Filtration paper bags. 1 Push down on the clamp knob located on the top of the dust cover and pull the dust cover forward. (Away from the unit.) (Fig. 14) _---- Clamp knob Dust cover Fig. 14 2 To remove the paper bag, grasp the col- lar on the bag and pull it out. (Fig. 15) Paper bag Fig. 15 3 Insert the new bag by pressing the collar opening completely around the suction inlet.. (Fig. 16) Collar Fig. 16 4 Spread out the sides of the new bag. (Fig. 17) __1. L,,_._, Fi

  • Sharp EC-12TWT9, HOW TO CLEAN 'THE SUCTION HOSE When a clog occurs,: o ,u0t o o00 c,0aoor,ro ..oe,eo.r, a,'iIi = outlet, place the vacuum cleaner in the Upright position. Hold the connection tube of the suction hose in •_ one hand and the handle in the other. Then pull out the connection tube from the suction pipe of the nozzle head.(Fig. 20) 3 Remove the clog carefully without damaging the suction hose. /11 After the clog is removed, insert the suction hose into the suction pipe and turn on the vacuum cleaner to check that the clog has been removed. Sucti

  • Sharp EC-12TWT9, REPLACEMENT INSTRUCTIONS HOW TO REMOVE THE BOTTOM PLATE Before replacing any parts, unplug the vacuum cleaner from the electrical outlet. To replace any of the following parts, set the handle to the Parallel position. Then turn the vacuum cleaner over, expos- ing the underside. Loosen the bottom plate by sliding the latch away from the mounting screw. (Fig. 21) Then remove the bottom plate. I Latch /,oon,,oO screw Fig. 21 HOW TO REPLACE THE HEADLIGHT LAMP 1 2 3 (EC-14TWT6/14TAT6/12TWT6/ 12TWT4/12TWT2 only) i ii 4 Remove the headlight mounting screws.. (Fig. 22) Note the arrangement of the lead wires and

  • Sharp EC-12TWT9, HOW TO REPLACE THE BELT (EC-14TWT6/14TAT6 only) F When replacing the belt, always set the RUG/FLOOR Selector to the "FLOOR" po- sition. 1 2 After removing the bottom plate, lift up the belt cover and remove the pulley cover to determine if the belt is worn or broken. (Fig. 24) If the flat belt is worn or broken, pull out the agitator and then remove the flat belt from the motor shaft and the agitator pul- ley. Rat belt Guide ii Belt cover Moter shaft Flat belt 3 Loop the new belt around the motor shaft and then loop it around the idling pulley. Pulley cover Agitator assembly (Fig. 25) Fig. 24 t _" -... _,,#,,,_,_ , Moter shaft _"_,,_ _, Main pulley L__... __- Idl

  • REPLACEMENT ]INSTRUCTIONS HOW TO REPLACE THE BELT (EC-12TWT6/12TWT4/12TWT2/12TXT2/12SXT4Bonly) 1 2 3 4 5 6 After removing the bottom plate, lift up the belt cover and remove the shelter plate. (Fig. 28) Pull out the agitator and then remove the flat belt from the motor shaft and the agitator pul- ley. Loop the new belt around the motor shaft and then loop it around the agitator pulley. (Fig

  • Sharp EC-12TWT9, HOW TO USE THE ON BOARD TOOLS Place the vacuum cleaner in the Upright posi- tion. 1 Hold the connection tube of the suction hose in one hand and the handle in the other. Then pull out the connection tube from the suction pipe. Then use the On Board Tools (Fig. 32) 2 Then select the tool best suited for the cleaning task from the descriptions below. Connection tube Extension wand Suction pipe Fig. 32 Extension wand (Models: EC-12TWT4/ 12TWT2/12TXT2/12SXT4B) For reaching ceilings,curtains,etc.(Fig.36) When connecting two wands, meet the illus- trated mark each other .(Fig.33-1) Telescopic wand (Models: EC-14TWT6/ 14TAT6/12TWT6) For reaching cellings,curtai:ns,etc.(Fig.36)

  • Sharp EC-12TWT9, BEFORE REQUESTING SERVICE If you experience any difficulties with your vacuum cleaner, use this Troubleshooting Chart first before requesting service. NOTE: Always remember to have the vacuum cleaner turned OFF and disconnect the plug from the power outlet before working on the vacuum cleaner. TROUBLESHOOTING CHART Problem Motor does not start when the power switch is in the ON position. The agitator does not ro- tate when the power switch is in the ON posi- tion. Suction power is weak or decreases suddenly. Check Check if the power cord plug is completely inserted into the outlet. (_Check that the RUG/ FLOOR selector is posi- tioned correctly.

  • DESCRIPTION OF ACCESSORIES For paper bags, belts or other parts, please contact your nearest Sharp Dealer. If your dealer does not stock these parts, you may order them by calling 1-800-BE-SHARP° r ITEM @ ® ® ® ® ® @ ® PART DESCRIPTION FLAT BELT PART NUMBER EC-02BU3 (2 PCS IN 1 PACK) RLM P-A001 VBE0LAMP AGITATOR ASSEMBLY (EC-14TWT6/14TAT6 only) AGITATO

  • Sharp EC-12TWT9, LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, willl be free from defective workmanship and materials and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof at no charge to the purchaser for parts or labor for the time period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additiona

Related Products and Documents (Vacuum Cleaner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Clarion HX-D2 Installation/wire connection manual clarion/hx-d2-HJY.pdf 11 Jul 2023 2 5.18 Mb
2 Commodore 1902A Operation & user’s manual commodore/1902a-385.pdf 02 Jan 2024 10
3 YORKVILLE SB500H Service manual yorkville/sb500h-FF2.pdf 23 Sep 2022 13
4 Cisco AIR-PCM340 Installation and configuration manual cisco/air-pcm340-94E.pdf 20 Mar 2024 200 7.31 Mb
5 Gefen GEF-HDFST-848-8ELR Operation & user’s manual gefen/gef-hdfst-848-8elr-474.pdf 13 Apr 2023 128 8.93 Mb
6 SEVERIN BA 3264 Dimensions severin/ba-3264-23N.pdf 05 Jan 2024 1 0.64 Mb

Similar Resources:

  • Bissell

    Series 1720

    (10 pages)
    ABISsEIrWe're glad you purchased a BISSELLLittle GreenTMPortable Deep Cleaner. Everything we know about floor carewent into the design and construction of this handy, high-techhome cleaning system.Your Little Green is well made, and we back it with afull one-year warranty. Wealso stand behind it with aknowledgeable, dedicated Consumer Services departmen …
  • SCS

    497AJX

    (4 pages)
    Chipsmall Limited consists of a professional team with an average of over 10 year of expertise in the distributionof electronic components. Based in Hongkong, we have already established firm and mutual-benefit businessrelationships with customers from,Europe,America and south Asia,supplying obsolete and hard-to-find componentsto meet their specific needs.Wi …
  • Koblenz

    U-800

    (14 pages)
    UPRIGHT VACUUM CLEANER MODELS:U-800 KOBLENZ ELECTRICA S.A. DE C.V.E-mail: [email protected]/14 SERVICE SERVICE MANUALPARTS LIST …
  • Bissell

    1620

    (20 pages)
    Safety InstructionsProduct ViewAssemblyOperations / Special ToolsPowerLifter® PlusUSER’S GUIDEMODEL 1620 3456-12Routine Maintenance12-16Troubleshooting17-18Warranty 20Replacement Parts19Consumer Services 18 …
  • Imetec

    Piuma Force F6206

    (18 pages)
    Istruzioni per l’usooperating instructionsMI001401SCOPA ELETTRICAELECTRIC BROOMIT pagina 1EN page 7www. imetec.comTenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALYTel. +39.035.688.111 Fax +39.035.320.149TYPE F6206IMETEC PIUMA POWER FORCE …
  • Cleanmaxx

    09294

    (48 pages)
    Z 09294_V0Gebrauchsanleitungab Seite 3Instruction manualstarting on page 14Mode d'emploià partir de la page 24Handleidingvanaf pagina 36DEGBNLFR09294_de-gb-fr-nl_V0.indb 109294_de-gb-fr-nl_V0.indb 1 30.10.2014 12:05:3130.10.2014 12:05:31 …

Comments, Questions and Opinions: