Manualios.com

Siemens TC100 Operating Instructions Manual

Siemens TC100 Manual Online:

4.85, 2347 votes
Siemens TC100 User Manual
Siemens TC100 User Guide
Siemens TC100 Online Manual

Text of Siemens TC100 User Guide:

  • Siemens TC100, Technical data 13-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Battery Service life in operation > 12 years Service life when switched off during storage > 12 years Service life when switched on during storage < 6 years, see Battery (Chapter 11.1) Electromagnetic compatibility (EMC) Radiated interference EN 55022 class A, FCC class A Interference immunity EN 55024 Environmental characteristics In operation EN 60721-3-3 (stationary use in weather-proof locations) class 3K3, During storage/transport EN 60721-3-2 class 2K4 Climatic conditions Temperature in operation 0°C to 55°C Temperature during storage/transport -40°C to

  • Messages 12-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Processor has not been updated System and Information A processor update has been performed, but the processor could not be updated. Hardware time set Information The SICLOCK TC100 internal real-time clock has been set. No usable NTP server Information No prefer

  • Siemens TC100, Operation planning 4-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 4.3 Unpacking and checking the delivery The device is completely assembled, tested and packed in the factory, and has no internal transport locks. If there are large temperature differences between the means of transport and the unpacking site, we recommend leaving the device in its transport packaging to avoid harmful condensation. Procedure • Please check the packaging material for transport damage upon delivery. • If any transport damage is present at the time of delivery, lodge a complaint with the responsible shipping company. Have th

  • Siemens TC100, 10-8© Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Parameter table 10 Table 10-1 List of SICLOCK TC100 parameters Access 1) / no. Parameter Eintry Value range / default Time 0.09.04 Local time Time and date 0.09.02 UTC time Time and date 0.09.06 Time zone Offset from UTC to zone time Min: Max: Default: UTC-12:00 h UTC+14:00 h UTC+01:00 h Time / Extended 0.09.07 Daylight saving time Change Min: Max: Default: Yes No Yes Changeover time from standard time to daylight saving Min: Max: Default: February, third Sunday, 00:00 h Specified date and time March, last Sunday, 02:00 h Changeover time

  • Siemens TC100, Service and maintenance 11-9 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 11.3 Software update Please contact Product Support for information and software updates for your SICLOCK TC100. See also Preface.

  • Siemens TC100, 6-3© Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Connection 6 6.1 Overview of connection Ensure that the installation complies with the following conditions: • The device may only be connected to 24 VDC power supply systems which meet the requirements of a safe extra-low voltage with protective separation according to SELV. The conductor cross-section selected must be large enough so that if there is a short circuit in the SICLOCK TC100 no damage can be caused by an overheated cable. For the conductor cross-section, see Connecting the power supply (Chapter 6.2). • Avoid extreme ambient conditions as far as possible. • Protect the de

  • Siemens TC100, Parameter assignment and operation of the device 8-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 8.1 Status display When the device is switched on, operation and status display are not possible for a brief ramp-up time. Figure 8-2 Device ramp-up display after switch on The time, date and current synchronization state are shown during operation. Figure 8-3 Example of display during operation SICLOCK TC100 ....... 09:48:26 → NTP Fr, 01. Oct. 2010 Table 8-1 Possible synchronization states Display Description → Q No external synchronization → NTP External synchronization via

  • 12-9© Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Messages 12 The messages are classified under four different types of event: • System (capacity for approx. 1,500 entries) • Application (capacity for approx. 4,500 entries) • Information (capacity for approx. 21,500 entries) • Warning (capacity for approx. 3,000 entries) Messages fo

  • Siemens TC100, Annex A-10 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions A.2 Certificates and approvals DIN ISO 9001 certificate The Siemens quality management system for all production processes (develop- ment, production and sales) meets the requirements of DIN EN ISO 9001. This has been certified by DQS (the German society for the certification of quality management systems). EMV Note The approval or certification is located on the rating plate. Table A-2 EMC Guidelines USA USA General This device complies with Part 15 of the FCC Rules.

  • Siemens TC100, Parameter assignment 9-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Microsteps If a difference occurs between the input synchronization (e.g. radio clock) and the device up to a tolerance threshold of several seconds, this difference is not adjus- ted immediately as this would lead to a time jump in the time synchronization. This difference is run down incrementally in microsteps, which are significantly below the time resolution of typical plants, and so remain unnoticed by the plant opera

  • Siemens TC100, Parameter assignment and operation of the device 8- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 8.2 Operation and parameter assignment 8.2.1 One-button operation with the MODE button The MODE button enables restricted operation and important parameters to be read out directly on the device. This mainly involves the network settings required to commission the device. There are three different operational actions for the MODE button: Example 1: Figure 8-5 Example 1 of one-button operation The display shows the readout of the currently set IP address. A short button pr

  • Parameter assignment 9-7 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.1.2 Operation as NTP client Four IP addresses of NTP servers can be assigned for SICLOCK TC100 as an NTP client. The servers are queried regularly, and a preferred server is selected according to a strict selection strategy. For the strategy in the event of loss of server, see Re

  • Siemens TC100, 9-7© Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Parameter assignment 9 Frequently required settings are described in the following. Get more information Parameter table (Chapter 10) Configuration Tool (Chapter 7)

  • Siemens TC100, Configuration Tool 7- ©Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 7.3 Parameters You can set and transfer parameters to the SICLOCK TC100 in the Parameter tab of the Configuration Tool in both offline and online modes. Figure 7-3 SICLOCK TC100 Configuration Tool - Parameters (1) Toolbar of the parameter tab (2) Parameter tree (3) Parameter table (4) Parameter info

  • Siemens TC100, Hardware description 3-2 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions For more detailed information see Parameter assignment and operation of the device (Chapter 8) . Table 3-1 Meanings of the displays and operator controls Name Color (LED) Meaning Displays POWER Green Operational readiness SYNC Green SICLOCK TC100 is externally synchronized. FAULT Red Alarm The associated message text is shown in the display. Flashing red Warning The associated message text is

  • Siemens TC100, Parameter assignment 9-8 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 9.3.5 Temperature You activate the monitoring of the module temperature with the parameter entry /Environment/Extended/Temperature/Monitoring (0.24.01) . You can set the following values: • Alarm • Warning • No monitoring The current module temperature is shown in the parameter entry /Environment/Status/Temperature (0.24.02) . 9.3.6 Battery You can switch the battery off for storage with the parameter entry /Environment/Extended/Battery/Switch Off (0.25.01) , and so s

  • Hardware description 3- © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions 3.2 Connection elements The following figure shows the connectors on the SICLOCK TC100. Figure 3-2 SICLOCK TC100 - layout of connectors (1) Terminal X1 - 24V supply voltage (2) Terminal X2 - connecting terminal for radio clocks, outputs and alarm See also Terminal assignment (Chapter 15.

  • Siemens TC100, Parameter assignment and operation of the device 8-6 © Siemens AG 2010 All Rights Reserved SICLOCK ® TC100 Operating Instructions Status display with queued message Figure 8-4 Example of display during operation with error The top line shows the message type and the date / time alternately. The mes- sage text is shown scrolling through the bottom line. When a message arrives, the background lighting is automatically switched on for 10 minutes. Background lighting Each time the button is pressed, the background lighting of the display is switched on for 10 minutes. EVENT event-text event-

Related Products and Documents (Clock):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony VPL-CS10 Operating instructions manual sony/vpl-cs10-128.pdf 26 Mar 2023 136 2.08 Mb
2 Buffalo NFINITI WZR-HP-G300NH Specifications buffalo/nfiniti-wzr-hp-g300nh-U9O.pdf 19 Apr 2023 2 0.27 Mb
3 Thermo Scientific Orion Star A329 Reference manual thermo-scientific/orion-star-a329-OYM.pdf 13 Jul 2022 72 1.11 Mb
4 AMX PLK-DMS Dimensional drawing amx/plk-dms-63J.pdf 12 Jan 2024 1 0.06 Mb
5 StarTech.com SV565UTP Instruction manual startech-com/sv565utp-2ZJ.pdf 01 Aug 2022 17
6 TRENDnet TEW-429UB Operation & user’s manual trendnet/tew-429ub-6H4.pdf 19 Mar 2024 44 1.64 Mb

Similar Resources:

  • Siemens

    GPS1000 2XV9450-1AR82

    (36 pages)
    SICLOCK® GPS1000 2XV9450-1AR82 Betriebsanleitung •••• User Manual Deutsch 1.0 Stand: Oktober 2005 English D GB Bestell-Nr.: 2XV9450-1AR82-BA …
  • Bodet

    Style 5 Seconde

    (54 pages)
    1Style 5 – Style 5S – Style 7 – Style 7 D – Style 7 E – Style 10 – Style 10S IND – IMP – RADIO (FI+DCF) – DHF – AFNORHORLOGES DIGITALES intérieuresDIGITAL CLOCKS indoorNotice d’installation et de mise en serviceInstallation and operation manualS’assurer à réception que le produit n’a pas été endommagé durant le transport pour …
  • Lathem

    DWA Series

    (1 pages)
    Lathem Time Tech TipsTip Set DWA.pdf Page 1 of 1Tip:Setting the Time DWA SeriesThe following setting instructions refer to the display of the DWA, DWA18-1 and 4000DWA Series."Old Style" KeypadEDAY0SAT7ONSUN18OFFMON29HDTUE3AMCLRWED4PMMEMCLRTHU5WKCLKFRI6CKT*"New Style" KeypadSETTIMESETDAYPGMSIGNALS12/24 HRDISPLAYSIGNALOFFSIGNALLENGTHRESTART …
  • American Time

    SiteSync IQ

    (2 pages)
    Your SiteSync IQ system is now set up for proper operation. For information on other features, see the Installation and Operation Manual that was included with your system. If you have any questions, please contact Technical Support at American Time: 800-328-8996.6Activate and hang your clocksDon't activate the battery or apply power to the clocks until …
  • Progetti

    CUCRUCIVERBA

    (2 pages)
    Istruzioni per l’uso del cucù CUCRUCIVERBADirections for CUCRUCIVERBA Cuckoo clockProgetti s.r.l.Via Brenta, 420048 Carate Brianza (MB) Italiawww.progettishop.ite-mail [email protected] delle pile esauste (applicabile in tutti i paesi dell'Unione Europea e in altri paesi Europei con sistema di raccolta differenziata)Questo simbolo sul p …
  • Auriol

    283736

    (44 pages)
    RADIO-CONTROLLED LCD CLOCKIAN 283736 RADIO-OHJA TTU LCD-KELLO Käyttö- ja turvaohjeet RADIO-CONTROLLED LCD CLOCK Operation and Safety Notes LCD-FUNKUHR Bedienungs- und Sicherheitshinweise RADIJO BANGOMIS VEIKIANTIS LAIKRODIS SU LCD EKRANU Nurodymai dėl valdymo ir saugumo RADIOSTYRD LCD-KLOCKA Bruksanvisning och säkerhetsanvisningar …

Comments, Questions and Opinions: