Manualios.com

Siemens SICLOCK GPS1000 Operation & User’s Manual

  • SICLOCK GPS1000 Clock Radio
  • ma71V1uyttdHs
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 21

Siemens SICLOCK GPS1000 Manual Online:

4.85, 2267 votes
Siemens SICLOCK GPS1000 User Manual
Siemens SICLOCK GPS1000 User Guide
Siemens SICLOCK GPS1000 Online Manual

Text of Siemens SICLOCK GPS1000 User Guide:

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 2 Version 2.0 Order number 2XV9450-1AR82-BA Responsible Distributor: Siemens AG, I&S EDM, Germany Contact person: local Siemens branch Orders: local Siemens branch Published by: Siemens AG I IA CE SE Würzburger Straße 121 D-90766 Fürth SICLOCK-Hotline: Phone: +49 (9131) 7-2 88 66 Fax: +49 (9131) 18-8 06 04 E-Mail: [email protected] WWW: http://www.siemens.com/siclock Technical subject to change without notice © Siemens AG 2012

  • Siemens SICLOCK GPS1000, User manual SICLOCK GPS1000 Order number 2XV9450-1AR82-BA Version 1.0 3 Contents: 1. Safety instructions ........................................................................................................5 2. Brief Overview...............................................................................................................7 2.1. Function .............................................................................................................................

  • User manual SICLOCK GPS1000 Order number 2XV9450-1AR82-BA Version 1.0 5 1. Safety instructions Caution CautionCaution Caution Please observe the safety instructions on the back of the cover sheet of this documentation. You should not expand your device unless you have read the relevant safety instructions. If you have questions about the validity

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 6 Version 2.0 Order number 2XV9450-1AR82-BA ESD guidelines ESD guidelinesESD guidelines ESD guidelines Modules containing electrostatic sensitive devices (ESDs) can be identified by the following label: Strictly follow the guidelines mentioned below when handling modules containing ESDs: • Before working with modules containing ESDs, you must discharge all your personal static e.g. by touching a grounded object. • All devices and tools must be free of static charge. • Always pull out the power plug before connecting or disconnecting modules containing ESDs. • Handle modules containing ESDs by their edges only. • Do not t

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 7 2. Brief Overview 2.1. Function SICLOCK GPS1000 is a modern GPS radio-controlled clock which can be used worldwide for the reception of time signals from the 24 American GPS satellites. At the output of the GPS1000 antenna head a DCF77 time telegram with Greenwich Meantime is available. The advantage of the GPS1000 is that the antenna, GPS receiver and GPS decoder are integrated in the an- tenna head as one unit

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 8 Version 1.0 Order number 2XV9450-1AR82-BA Connection to SIMATIC S7 Digital input: via shielded twin-core control cable from terminal X2/1,2 at SICLOCK GPS1000 PS to the corresponding SIMATIC S7 digital input. (necessary function module for step7 - software: 2XV9450-1AR30). 12. Switch on the mains power. When the green LED “Pwr” is illuminated, the initializing of the antenna head now begins (yellow LED “Sig” permanently illuminated). After successful initialization, the initializing of the time reception begins, which, according to the reception situation and the number of availabl

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 9 3. Installation instructions 3.1. Connection to SICLOCK TM or PC Fig 2 shows a schematic diagram of the connection of GPS1000 to SICLOCK TM or to a PC without lightning pro- tection. The parts illustrated in photos and the grey cables are included in the scope of delivery of the complete package SICLOCK GPS1000. The red cables must be provided on site. Fig 2: Installation diagram for SICLOCK TM and PC without lightning protection module. Power supply 24-230 V/DC or 48-230 V/AC

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 10 Version 1.0 Order number 2XV9450-1AR82-BA Parameterization required for SICLOCK TM: 1. Set input E1 to DCF passive. 2. Set time zone according to the location in relation to GMT (see SICLOCK TM manual) Fig. 3 shows in schematic diagram the connection of GPS1000 to SICLOCK TM or to a PC with the lightning pro- tection module 2XV9450-1AR83. The parts illustrated in photos and the grey cables are included in the scope of delivery for the complete package SICLOCK GPS1000 except of the lightning protection module. The red and green cables must be made available on site. The lightning protection module should be ins

  • User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 11 3.2. Connection to SICLOCK TC400 / TC100 or TS Fig. 4 shows in schematic diagram the installation of SICLOCK TS without lightning protection . The parts illus- trated in photo and the grey cable are included in the scope of delivery for the complete package SICLOCK GPS1000. The red cable must be made

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 12 Version 1.0 Order number 2XV9450-1AR82-BA Fig. 5 shows a diagram of the connection from GPS1000 to SICLOCK TS with lightning protection module 2XV9450-1AR83. The parts illustrated in photo and the grey cable are included in the scope of delivery for the complete package SICLOCK GPS1000 except of the lightning protection module. The red and green cables must be made available on site. The lightning protection module should be installed in the building as near as possible to where the antenna ca- ble enters the building. Im

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 13 4. Lightning Protection When exterior antennas are used in industrial areas, a reliable lightning protection is of the utmost importance for operating the system safely. The installation of a lightning protection unit alone is not sufficient. The antenna and antenna cable must be in- stalled in such a way that a direct stroke of lightning or flashover in these parts is not possible. Otherwise it would not be possible to prevent the destruction of parts of the unit. 4.1. Lightning Theorie Recordings made with high speed cameras have shown that lightning does not cover the distance between the s

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 14 Version 1.0 Order number 2XV9450-1AR82-BA 4.2. Parts of buildings in danger of being struck by lightning The determination of potential areas in danger of being struck by lightning can be done in a very simple way by conjuring up a mental picture of the ball of lightning rolling over all the surfaces and edges of the building to be examined (see Fig 7 and Fig 8 ). All areas, where the ball of lightning touches surfaces or edges, are in danger of being struck by lightning (shown in red). F

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 15 4.3. Inducting effect during lightning strikes Another important parameter influencing the choice of antenna location is the induction effect which arises from lightning conductors or building parts where lightning current flows through. When the lightning hits into a lightning conductor, within a few hundred nanoseconds, voltages of several megavolts are built up, which result in conducted currents up to several 10000 amps with correspondingly steep surge pulse edges (depending on the inductive resistance of the lightning conductor). Leading to powerful elec- trical fields which a

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 16 Version 1.0 Order number 2XV9450-1AR82-BA 5. Mounting the antenna 5.1. Procedure for selecting the installation location The best reception is achieved when the antenna is installed in the open air. This however, means that there is a possible danger of lightning striking. Therefore the location selection criteria in chapter 3.4 are of utmost importance! Concerning the best performance for signal reception, the following points should be taken into account when selecting a suitable location: The anten

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 17 Fig 10: Wall mounting (a) Mark the position of the mounting holes at the planned place with the aid of the base plate (5), drill the holes and insert dowels. . (b) In preparation of the antenna installation, it shall be taken into account whether the antenna is to be assembled for wall mounting or flat roof installation. • When installing the antenna on a flat roof, (Fig 9), the connecting cable of the antenna head (1

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 18 Version 1.0 Order number 2XV9450-1AR82-BA 6. Appendix 6.1. Technical data SICLOCK GPS1000 Antenna head with mounting stand Operating frequency: 1.574 GHz Precision: max. 1 µ sec Time of day transmitted: GMT Parameterization: not necessary Antenna cable (coaxial): not necessary Connecting cable: 2.5 m shielded twin-core control cable Connection extension: via shielded twin-core control cable and conduit box supplied Maximum cable length: 1000 m Time telegram transmitted: DCF77 simulation signal without summertime bits Power supply: Loo

  • User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 19 6.3. Precision The absolute time precision for the individual DCF output interfaces is maximum 60 µs for the TTY interfaces and maximum 10 µs for the RS232 interface. The relative precision is better than 3 µs for both interfaces. The relative precision specifies the maximum dev

  • Siemens SICLOCK GPS1000, User Manual SICLOCK GPS1000 Order numberr 2XV9450-1AR82-BA Version 2.0 21 The trademarks SICLOCK, GPS1000 from Siemens AG are registered and protected by law. The right to technical modifications to the product reserved. This description is not deemed to be an assurance of the properties. Technical data and illustrations are not binding for delivery. The forwarding or reproduction of this document, the exploitation

Related Products and Documents (Clock Radio):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Denon AVR-1909 Owner's manual denon/avr-1909-9C4.pdf 02 Jul 2023 81 7.55 Mb
2 Hoshizaki Serenity Series KMS-822MLH Service manual hoshizaki/serenity-series-kms-822mlh-P38.pdf 10 Jul 2023 47
3 Kenwood UD-900 Instruction manual kenwood/ud-900-N3G.pdf 04 May 2023 84
4 Asus Asteio D22 Operation & user’s manual asus/asteio-d22-5I7.pdf 07 Aug 2022 252 14.92 Mb
5 Vitek VT-1655 Instruction manual vitek/vt-1655-65W.pdf 04 Aug 2022 8
6 Leica Rugby 100 Operation & user’s manual leica/rugby-100-9EP.pdf 14 Aug 2023 28

Similar Resources:

  • Sunsky

    CRP2687

    (4 pages)
    DAB/FM CLOCK RADIOUSER manualIntroductionThis clock radio unit has a big size LED display, easy to watch the time, especially for theelderly. with this unit, you can enjoy DAB radio and FM radio, The radio can be set as the alarmtimer. You can set two alarm timers to go off at different time .what in the box Main unit :1pcs USB to DC power cable: 1pcsO …
  • Technoline

    DCF-77

    (32 pages)
    RADIO CONTROLLED PROJECTION ALARM CLOCK Instruction manual INTRODUCTION: Congratulations on purchasing this innovative Projection alarm clock which displays indoor temperature and humidity and also outdoor temperature (by 433MHz transmission). It is further acting as a DCF-77 radio controlled clock with an alarm. With the totally 15 different weather foreca …
  • GPX

    CRCD2806

    (2 pages)
    5WAKE TO CDPARA DESPERTARSE CON EL DISCO COMPACTOPOUR SE RÉVEILLER AVEC LE DISQUE COMPACT6BUZZCD RADIOONAUTOOFFFOLLOW STEPS 1 4~NOTE:• When you press the Snooze Button the alarm will be turned off temporarily for approximately 9 minutes.NOTA:• Cuando presione el botón Snooze la alarma se apagará temporalmente durante 9 minutos.REMARQUE:• Quand vous …
  • iHome

    iH120

    (15 pages)
    Model iH120Alarm Clock For Your iPod Questions? Visit www.ihomeaudio.comModel: iH120 (Cost down version) Instruction ManualDate: Fen 10, 2009Print color : Black text on white paperSize: 178W x 178H mmNow PlayingKeith LuBrant1:03-2:30All I Want To Be …
  • Philips

    AJ3600/05

    (4 pages)
    Printed in ChinaMeet Philips at the Internethttp://www.philips.comClock radioClock Radio AJ 3600DeutschNederlandsItalianoEnglishFrançaisEspañolUser manualManuel d'utilisationManual del usuarioGebruikershandleidingBenutzerhandbuchManuale per l'utenteREPEAT ALARMBRIGHTNESS CONTROLAJ3600 PROJECTION CLOCK RADIOALARM RESET/SLEEPRADIO ON/OFFBAND1AL1 …
  • Akai

    AR150D

    (3 pages)
    CLOCK RADIO AR150D Gebruiksaanwijzing.............. 1-3 Mode d'emploi...................... 4-5 Instruction manual................ 6-7 USER GUIDE …

Comments, Questions and Opinions: