Manualios.com

Siemens SIMATIC Box PC 620 Owner's Manual

Siemens SIMATIC Box PC 620 Manual Online:

4.45, 2859 votes
Siemens SIMATIC Box PC 620 User Manual
Siemens SIMATIC Box PC 620 User Guide
Siemens SIMATIC Box PC 620 Online Manual

Text of Siemens SIMATIC Box PC 620 User Guide:

  • Siemens SIMATIC Box PC 620, Welcome to the SIMATIC Box PC 620 2-8 SIMATIC Box PC 620 Manual A5E00131465-01 2.6 Drives The Box PC is equipped as standard with a 3.5” disk drive or an LS240 drive and a 3.5” hard disk drive. 2.6.1 Disk Drive (Depending on the Device Configuration) You can store programs and data on diskettes with the disk drive and load them from diskettes into the Box PC. Types of Diskette You can use following diskettes: double sided double density diskette double sided high density diskette LS240-Superdisks 3,5 inch 3,5 inch 3,5 inch 72

  • Siemens SIMATIC Box PC 620, Hardware Information 7-22 SIMATIC Box PC 620 Manual A5E00131465-01 I/O Port for Front Control Elements All the signals in addition to the Display and COM2 port which are necessary for the connection of front control elements are applied to this port. The maximum cable length is 50cm with a USB data transfer rate of 12MBaud. Pin No. Designation Description Input / Output 1 GND Ground - 2 P12V Power supply for inverter Output 3 BL_ON Backlight on (5V = On) Output 4 P5V_fused +5V (fused) Output 5 GND Ground - 6 P3V3_fused +3.3V (fused) Output 7 K

  • Siemens SIMATIC Box PC 620, Preface, Contents Important Information 1 Welcome to the Box PC 620 2 Setting-up and Operating the Box PC 620 3 Box PC 620 Expansions 4 Configuring the Box PC 620 5 Error Diagnosis 6 Hardware Information 7 Reinstallation of the Software 8 Appendix Guidelines for ESD A Technical Specifications B Glossary, Index Edition 03/2002 A5E00131465-01 Box PC 620 Manual Valid for devices with the order number 6ES7647-5... SIMATIC

  • Siemens SIMATIC Box PC 620, Hardware Information 7-16 SIMATIC Box PC 620 Manual A5E00131465-01 Ethernet RJ45 Connection LED greenLED yellow 1 8 Figure 7-8 Ethernet port Pin-No. Designation Description Input / Output 1 TD+ Transmitted data Output 2 TD– Transmitted data Output 3 RD+ Received data Input 4, 5 * SYMR Internal 75 Ω output - 6 Received data Input 7, 8 * SYMT Internal 75 Ω output - S Shield - LED green Connection - LED yellow Activity - * is not necessary for data transfer

  • Siemens SIMATIC Box PC 620, Setting Up and Operating the SIMATIC Box PC 620 3-15 SIMATIC Box PC 620 Manual A5E00131465-01 Connecting a PS/2 Keyboard A PS/2 keyboard of your choice can be connected to the Box PC. PS/2 keyboard connection Figure 3-9 Connecting a PS/2 Keyboard To connect the keyboard, proceed as follows: 1. Disconnect the Box PC from the power supply. 2. Insert the plug of the PS/2 keyboard. 3. Connect the Box PC to the power supply. Note It is recommended that a keyboard with straight keyboard connector is used, so that the connector does not obscure adjacent ports.

  • Siemens SIMATIC Box PC 620, Glossary Glossary-20 SIMATIC Box PC 620 Manual A5E00131465-01 Video Adapter Also known as Video Controller, this electronic component generates the video signal sent through a cable to a video display. The video adapter is usually located on the computer’s main system board or on an expansion board, but it is sometimes built into the terminal. W Warm Start Restart of a computer in operate state without switching off the power supply (Ctrl + Alt + Del). WAV A file format in which Windows stores sounds as waveforms. Such files have the extension .wav. Windows Windows is a multitasking graphical user interface environment that runs on MS-DOS-based computers (Windows 3x and W

  • Important Information 1-3 SIMATIC Box PC 620 Manual A5E00131465-01 Country-Specific Information For the United States and Canada: In the United States and Canada USA, a CSA or UL-listed power supply cable must be used. The male plug is a 5-15 style. For operation with 120 V: Use a UL Listed, CSA Labelles Cord Set, consisting of a min. 18 AWG. Type SVT or STJ three cond

  • Siemens SIMATIC Box PC 620, Configuring the SIMATIC Box PC 620 5-15 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.2 The Advanced Menu Menu Structure PhoenixBIOS Setup Utility Item Specific Help ESC Exit Reset Configuration Data: Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup Defaults Save and Exit COM/LPT Configuration Floppy disk controller: [Enabled] [ No ] Select the operating system installed on your system which you will use most commonly. Note: An incorrect setting can cause some operating systems to display unexpected beha

  • Welcome to the SIMATIC Box PC 620 2-10 SIMATIC Box PC 620 Manual A5E00131465-01 Authorization with Authors W V2.x To authorize STEP 7 and other SIMATIC components you must use AuthorsW. Start this program on the PG via the taskbar under Start > Simatic > AuthorsW. Usage Notes for LS240 Superdisks LS240 drives are suitable for floppy disks up to 1.44 Mbytes as well as Superdisk

  • Siemens SIMATIC Box PC 620, Configuring the SIMATIC Box PC 620 5-7 SIMATIC Box PC 620 Manual A5E00131465-01 Primary Master Primary Slave Secondary Master/ Secondary Slave The system jumps to the following submenu when you select this type of menu field: PhoenixBIOS Setup Utility Item Specific Help Type: ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup Defaults Save and Exit [Auto] (recommended) Autotypes installed IDE-devices [USER] Enter parameters of IDE-devices installed at this connection Enter Help F1 Main Primary Master [20496 MB] [ Auto ] Maximum Capacity: 20496 MB Multi-Sector Transfers: [16 Sectors] LBA Mode Control: [Enabled] 32 Bi

  • Siemens SIMATIC Box PC 620, Welcome to the SIMATIC Box PC 620 2-9 SIMATIC Box PC 620 Manual A5E00131465-01 Handling Disks with the LS 240 Drive Depending on the fitting position, the disks are inserted into the disk drive as illustrated below: Access hole for emergency ejection (only LS240) Ejector Ejector Access LED Access LED Figure 2-5 Handling Disks ! Caution Risk of loss of data! When the green access LED of the LS 240 drive is lit, the ejector may not be actuated. LS 240 drives are very sensitive to shocks of a non-permissible level. Shocks during operation can lead to damage to the drive or the data carrier. You can find the permissible values in the technical data in Sect

  • Siemens SIMATIC Box PC 620, Setting Up and Operating the SIMATIC Box PC 620 3-18 SIMATIC Box PC 620 Manual A5E00131465-01 Note Peak currents of 650 mA at 5 V based on 3 s are permitted! Examples of PCMCIA cards connected to PC card interface for Hard Disk 330 mA read/write (Maxtor MXL-131-III) 640 mA spin up 2 s. . . . . 110 mA idle. . . . . . . . . . . . . . . . . . . . . . . . Fax/modem 60 mA idle. . . . . . . . . . . . . (Dr. Neuhaus) 140 mA transfer. . . . . . . . . . . Ethernet (XIRCOM) 150 mA. . . . . . . . . . . . . . Installing PC Cards Note the foll

  • SIMATIC Box PC 620 Expansions 4-15 SIMATIC Box PC 620 Manual A5E00131465-01 Aligning the Holding-Down Device Proceed as follows to install the holding-down device. 1. Insert the slide element through the guide slit until it is resting firmly on the module. The module must now be introduced into the notch. ! Caution No pressure may be exerted on the module! Therefore, do not use fo

  • Siemens SIMATIC Box PC 620, Important Information 1-7 SIMATIC Box PC 620 Manual A5E00131465-01 1.3 Certification for the USA, Canada and Autralia Security One of the following markings on a device is indicative of the corresponding approval: Underwriters Laboratories (UL) to the UL 1950 Standard (I.T.E) or to the UL508 (IND.CONT.EQ) Underwriters Laboratories (UL) to the Canadian Standard C22.2 No. 950 (I.T.E) or to the C22.2 No. 142 (IND.CONT.EQ) Underwriters Laboratories (UL) to Standard UL 1950, Report E11 5352 and to the Canadian Standard C 22.2 No.950 (I.T.E) or to the UL508 and C22.2 No. 142 ( IND.CONT.EQ ) or to the UL508 and C22 . 2 No . 142 (IND . CONT . EQ

  • Siemens SIMATIC Box PC 620, Welcome to the SIMATIC Box PC 620 2-2 SIMATIC Box PC 620 Manual A5E00131465-01 2.1 Port Side View 12 34 56 7 8910111213 Figure 2-1 Ports 1 Mouse PS/2 socket for connecting a PS/2 mouse. 2 COM1 V.24 /MODEM /AG The COM 1 (TTY) port is used to connect, for example, S5 automation units (AG). The supplied adapter can be used to convert the port into a 25-pole standard V.24 port for connecting serial port devices such as modem, mouse or printer. The line current (TTY) interface is an optional product feature. 3 COM2 You can use the serial port 2 (V.24) to connect devices with a serial port such as

  • Siemens SIMATIC Box PC 620, Setting Up and Operating the SIMATIC Box PC 620 3-19 SIMATIC Box PC 620 Manual A5E00131465-01 3.6 Connecting the SIMATIC Box PC 620 to other SIMATIC S5 Point-To-Point Connection In this section, you will learn how to connect your SIMATIC Box PC 620 to a programming device or S5 programmable logic controller using a point-to-point connection. You can stablish a point-to-point connection by connecting the SIMATIC Box PC 620 to another programming device or a programmable logic controller using  A V.24 connection  A TTY

  • Setting Up and Operating the SIMATIC Box PC 620 3-25 SIMATIC Box PC 620 Manual A5E00131465-01 3.8 Networking the SIMATIC Box PC 620 with Other Stations on PROFIBUS Networking the Box PC on PROFIBUS PROFIBUS is an open and robust bus system for industrial use. It can be used to configure networks with up to 32 stations per segment. PROFIBUS-DP supports data-tran

  • Siemens SIMATIC Box PC 620, Configuring the SIMATIC Box PC 620 5-18 SIMATIC Box PC 620 Manual A5E00131465-01 ”PCI Devices” Submenu If the PCI devices field is selected, the following submenu appears: PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup Defaults Save and Exit Enter Help F1 Advanced Option Rom Scan Enable Master: Latency Timer [Enabled] [Enabled] [0040h] PCI Devices, Slot #1 Initialize device expansion rom Figure 5-12 ”PCI Devices, Slot #1” Submenu Option ROM Scan: [Enabled] The op

  • Siemens SIMATIC Box PC 620, Index Index-3 SIMATIC Box PC 620 Manual A5E00131465-01 R Removal and installation bus board, 4-23 CD ROM drive, 4-19 device for holding down the modules, 4-14 expansion cards, 4-16 fan, 4-25 floppy disk drive, 4-20 LS 240 drive, 4-21 motherboard, 4-24 power supply unit, 4-22 Repairs, safety instructions, 1-3 Reset Button, 2-4, 4-27 RJ45 Ethernet Interface, 3-26 S Safety instructions Backup battery, 1-4 power supply, 1-2 repairs, 1-3 ventilation, 1-1 Security, 1-7 Serial Number, 3-2 Serial Port, 7-10, 7-11 Service & Support, vi Side View, 2-6 Standards, iii Starting SETUP,

  • Siemens SIMATIC Box PC 620, Glossary Glossary-10 SIMATIC Box PC 620 Manual A5E00131465-01 Interface  An interface is the connection between individual hardware elements such as PLCs, programming devices, printers, or monitors via physical connections (cables).  An interface is also the connection between different programs, to enable them to work together. Interface Module Module which controls and extends the hardware periphery. IRQ Acronym for interrupt request. One of a set of possible hardware interrupts, identified by a number. The number of the IRQ determines which interrupt handler will be used. In the AT bus, ISA, and EISA, 15 IRQs are availa

Related Products and Documents (Desktop):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony Trinitron PVM-2130QM Service manual sony/trinitron-pvm-2130qm-26I.pdf 02 Mar 2023 67
2 Lattice Semiconductor MachXO2 Operation & user’s manual lattice-semiconductor/machxo2-9VP.pdf 07 Oct 2023 32
3 Everex CloudBook CE1200V Quick setup manual everex/cloudbook-ce1200v-1QD.pdf 19 Sep 2023 4 1.1 Mb
4 Digitana VCS3 MKII Quad Midi-CV Operation & user’s manual digitana/vcs3-mkii-quad-midi-cv-541.pdf 16 Apr 2023 13
5 SilverStone TS11-C Manual  silverstone/ts11-c-J5H.pdf 27 Jul 2023 92
6 Viessmann VITOROND 100 VR1 Series Technical data manual viessmann/vitorond-100-vr1-series-1PK.pdf 27 Jul 2023 16

Similar Resources:

  • Dell

    Precision T7500

    (108 pages)
    Dell Precision™ T7500 Service Manual Working on Your ComputerAdding and Replacing PartsSpecificationsDiagnosticsAbout MemoryAbout Your System BoardSystem Setup Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates potential damage to hardware or loss of data if …
  • Garmin

    NMC 2001

    (6 pages)
    Quick Reference GuideApollo NMS 2001/2101RGPS IN USE(A)45 11.87 PDOP122 53.30 0.0LORAN STANDBY36 11.900 95 53.28GPS USE?36 11.900 95 53.28LIT AIRPORTLITTLE ROCKCITY AR USAETE LIT 00:53BRG134 91.5NMDirect-TO NavigationPress the button shownTurn the Data (small) knobTurn the Control (large) knobSELSelecting Position Sensor For NavigationAccesses Navigation Mod …
  • Intel

    SR1425BK1 - Entry Server Platform

    (82 pages)
    Intel® Server Chassis SC1400UP / Intel® Server Platform SR1425BK1-E Technical Product Specification Intel order number C94051-001 Revision 1.0October 2004Enterprise Platforms and Services Marketing …
  • HP

    9040

    (220 pages)
    HP LaserJet 9040/9050Getting Started GuideAloitusopasKomme i gang   StartbokenBaşlangıç Kılavuzu …
  • Unitech

    PA600

    (9 pages)
    Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.PA600 Phone EditionQuick Reference GuideUnitech is a member of the Oracle Embedded Software Licensing Program.400647G Version 1.0 …
  • Sony

    SVJ2021BPXW

    (2 pages)
    20” HD touchscreen displayThe VAIO® Tap 20 features exceptional picture quality and a capacitive touchscreen. Every touch of your nger elicits snappy performance no matter what you're doing. The 20” 1600 x 900 touchscreen LCD is equipped with IPS (in-plane switching) technology so you can enjoy a crisp image from any viewing angle. Backed by So …

Comments, Questions and Opinions: