Manualios.com

GE VG4060 Operation & User’s Manual

GE VG4060 Manual Online:

4.45, 923 votes
GE VG4060 User Manual
GE VG4060 User Guide
GE VG4060 Online Manual

Text of GE VG4060 User Guide:

  • GE VG4060, Additional Setup Features Below is a list of features, many of which need to be set up before using your VCR for the first time. Essential features are handled during the initial setup, but all features can be accessed through the Preferences menu. To get the most out of the VCR, make sure to refer to this section. Language Cable box setup VCR Channels list (Auto Channel Search) Auto Clock set (includes time zone and Daylight-Saving Time set) or- V SETTING UP THE VCR V V V Manual clock set Remote VCR1/VCR2 Auto play* Auto TV/VCR* EnergySaver* Front panel brightness* V ¥ V * Features not handled during the QuickSet initial setup

  • GE VG4060, This section gives you some additional information about the VCR, including a description of the unit's controls and display. You also will find a Troubleshooting "tips section in this Appendix, which might help to resolve some of those simple problems. Finally, this section contains your warranty information. V V ¥ V ¥ V 8 V REFERENCE I 47

  • GE VG4060, Choosing a VCR Connection There are several different ways to connect your VCR, depending on whether or not you have cable service, if you have a cable box to see this service, whether some of the cable channels are scrambled, and so on. Three connections are described in this section and one of them should provide you with a VCR connection that works. TV with RF jack only TV with audio/video jacks TV with audio/video jacks and cable box to unscramble pay channels only If you need to connect additional components not shown in the diagrams here (and are unsure of how to connect them), refer to the instruction

  • GE VG4060, Connecting Your VCR Refer to these pages to help you connect your VCR, Jacks and Cables RFJacks and Coaxial Cables (F-type) The RF jacks provide good picture and mono sound quality, and must be used if audio/video connections are not available for your TV. These jacks are required for antenna or cable-TV connections. The RF jacks on the VCR are labeled ANT. IN and OUT TO TV. The coaxial cable supplied with your VCR is used to connect the VCR's OUT TO TV jack and your TV's antenna input. 0 RF Jack Audio/Video Jacks and Cables (RCA-type) The AUDIONIDEO jacks provide very good picture quality and mono sound, and can be used if your TV has audio/video input jacks.

  • GE VG4060, Using the Menu to Set Up Features You can set up your VCR's features by using the remote control's buttons to enter your choices from on-screen instructions. Each menu item is explained in this section. For each numbered selection on the menus, use the same numbered button on the remote control to select it. Language Selection If you did not complete this step in the previous section using the QuickSet Guide, it is time to select your preferred language. Once this step is complete, all on- screen displays

  • Control Your Television The remote can be programmed to control a television. It is programmed to control a GE, RCA, or PROSCAN TV. Other manufacturer's brands need to be programmed. V V V V PROGRAM THE REMOTE V V V 31

  • GE VG4060, Remote Buttons The remote control is capable of controlling your VCR and many brands of televisions. If you have a GE, RCA or PROSCAN TV, you may be able to control it without having to program the remote. Component Buttons ON.OFF Turns off VCR when remote is set to control the VCR. Also turns some compatible components on and off. Turns on a compatible GE, RCA, or PROSCAN TV and sets the remote to control the TV. Also used with the ON-OFF button to turn on a different brand of TV (if programmed) and sets the remote to control the TV. MCR Turns on a compatible GE, RCA, or PROSCAN VCR and sets the remote to c

  • Remote VCRI/VCR2 Option If you own a compatible GE, RCA, or PROSCAN remote that has a VCR2, VCR2-LD, or VCR2-DVD button, this feature allows you to set this VCR to respond to that button. Press 1 to select the Remote Control item. Then press the VCR2, VCR2.LD, or VCR2oDVD button to change. PREFERENCES 2 Auto Play: 3 Auto TV/VCR: 4 EnergySaver: 5 Front Panel: 6 Tape Speed: 7 Set Auto Repe

  • GE VG4060, Front Panel z/ \ \ Remote control sensor AUDIO and VIDEO INPUT Jacks Receives audio signals from another component, like a VCR or cemcorder when it is connected to these jacks. Use INPUT on the remote to select L2 to record from these jacks. CHANNEL TRACKING Up or Down Selects next higher or lower channel in the VCR's channel memory. Adjusts tracking when a tape is playing. Press both together to re-center tracking. FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback. Starts slow motion during play-pause and increases slow-motion speed. PLAY PAUSE Plays a tape. Pauses action for viewin

  • GE VG4060, 6 If the menu does not appear: Make sure the TV is tuned to the same channel as the CH3 CH4 switch or its video input (see "How to Find Your TV's Video Input Channel" in the References section of this manual for more information). Make sure the VCR indicator is on in the VCR display if you connected your VCR using the ANT. IN and OUT TO TV jacks. Check your connections. If you choose to set up your VCR options individually, then go to the next section. Step 8: Access the Menus The MENU and number buttons on the remote let you access, select, and change your VCR's preferences. For example, to select a different

  • GE VG4060, Step 5: Tune the TV Tune the TV to the VCR viewing channel. The VCR viewing channel is channel 3 or 4 or the TV's video input. If you connect your VCR using the ANT. IN and OUT TO TV jacks with RF coaxial cable, set the CH3 CH4 switch to channel 3 or channel 4-- the channel you want to use on your TV. If you connect your VCR using the AUDIO/VIDEO jacks with audio/video cables, select the TV's video input with the remote's TV and INPUT buttons to see the signal. See "How to Find Your TV's Video Input Channel" in the References section of this manual for more information about your TV's input channel. Ste

  • GE VG4060, Auto Clock Set Feature The Auto Clock Set feature is set to ON at the factory. In the ON setting, the VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. There are certain steps that are required, such as Auto Channel Search, setting the Time Zone, and Daylight Saving feature before the Auto Clock feature works. Setting the Time Zone 1. Press MENU on the remote to displaythe VCR MAIN MENU. VCR MAIN MENU I Timer Recordings I Im 3 Channels 4 Setup 5 Preferences 6 Language 0 Exit 2. Press 2

  • GE VG4060, WARNING To reduce risk of fire or shock hazard, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE RISKOFELECTRICSHOCK PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE DO NOT OPEN PERSONNEL. This symbol indicates "dangerous _k This symbol indicates _k voltage" inside the product that important instructions ,_ presents a risk of electric shock or accompanying the product, personal injury. Cautions Caution: To prevent electric shock, match wide blade of plug to wide slot, full

  • GE VG4060, Welcome to Your New VCR... To help you get started using your VCR with as little reading as possible, we've put all the basic information needed in the first three sections. To help you along, there's even a QuickSet Guide the first time you turn on your VCR, which walks you through several setup steps at once. Getting Started Before this first step, though, learning about the time and date, your remote control's features, working with channels, and basic video tape operations are essential to get all you can out of the VCR. Once you are comfortable with these featu

  • GE VG4060, S SAFE display 38 Safety tab 22 Search commercial scan 38 forward and reverse 36 frame advance 36 index 37 slow-motion 36 zero 37 SEARCH button 21, 37 SET DAYLIGHT SAVINGS menu 14 SETTIME AND DATE menu 14 SETTIME ZONE menu 13 Set up cable box 9 channels list 10 language 8 time and date 12 using menus 8 using PREFERENCES menu 15 Signal type 12 Slow-motion search 36 SLP (tape speed) 23 SLP indicator 49 SP (tape speed) 23 SP indicator 49 Specifications 55 SPEED button 21, 23, 26, 49 Status indicators 49 BYE 49 EJEC (Eject) 49 FF 49 HI 49 PLAY 49 R0:30 49 REC 49 REW 49 SAFE 49 SCH and SCH- 49 STOP 49 STOP button 21, 23, 26, 37 STOP-EJECT button 23, 48 T Tape ejecting 23 p

  • Display Panel REC Indicator (REC) Lights up and replaces the time display when the VCR is recording. Time, Channel Number, Line Input Indicator (L1 or L2), Tape Speed Indicator, or Status Indicator Channel Number or Line Input Indicator The channel number appears when the VCR is tuned to a channel. The line indicator (L1 or L2) appears when the VCR's line

  • GE VG4060, About Programming the Remote The remote can be programmed to control other brands of remote controllable TVs. It is already programmed to operate most GE, RCA, and PROSCAN televisions. Programming the Remote to Control a TV If the TV does not turn on when you press the TV button, the remote needs to be programmed. Follow these steps to program the remote to control your particular TV: 1. Turn on theTV. 2. Find your TV brand and code number(s) on the code list on the next page. 3. Press and hold the TV button on the remote. 4. Enter the code from the code list. 5, , Release TV, and then press CHAN up or down. if

  • 4. Continue playing the tape. 5. Press STOE 6, Press SEARCH on the remote twice to display the ZERO SEARCH menu. 7. Press REVERSE to return to 0:00:00 on the tape. Commercial Scan (SEARCH Button) This is useful for skipping commercials or short program segments. Press SEARCH once during playback to advance the tape approximately 30 seconds of recorded material.

  • GE VG4060, 22 MUTE Reduces volume to minimum level. Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing_and holding 1 until 1 -- appears on the screen. Then press the other two numbers. ON.OFF Turns a compatible TV off and on. VDL Up and Down Raises and lowers sound of TV. Playing a Tape I. Tune the TV to your VCR viewing channel (3, 4, or TV's video input- see "How to Find Your TV's Video Input Channel" in the References section of this manual for more about the video line input). 2. Insert a tape

  • GE VG4060, Troubleshooting Tips No power Check to make sure it is plugged into an operating outlet. Check to make sure your connections are correct. VCR does not respond to remote Check to make sure there are no objects between the VCR and remote. The batteries may need changing. Make sure the Remote VCR1/VCR2 setting is set to VCR1 so the remote that came packed with your VCR can operate it. Poor or no picture for normal TV viewing Check to make sure the VCR indicator is off. Check to make sure the TV is switched to an active channel. Check to make sure the antenna connections are secure and correct. Snowy or no picture during playback Press TVoVCR to turn VCR indicator on. Check TV cha

Related Products and Documents (VCR):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Young America SSC 1400 Assembly instructions manual young-america/ssc-1400-66L.pdf 30 Oct 2023 48
2 Panasonic LUMIX DMC-FZ10EB Operating instructions manual panasonic/lumix-dmc-fz10eb-F84.pdf 25 Nov 2023 132
3 SkyLink ID-318 Operation & user’s manual skylink/id-318-867.pdf 09 Mar 2023 2 4.12 Mb
4 GE TruVision TVC-SDC2-HR Installation manual ge/truvision-tvc-sdc2-hr-946.pdf 03 Jan 2023 7
5 Eonon L0405M Operation & user’s manual eonon/l0405m-6OA.pdf 17 Feb 2023 5 2.27 Mb
6 Extron electronics 246-03 Specification sheet extron-electronics/246-03-QY5.pdf 31 Mar 2023 1 0.21 Mb

Similar Resources:

  • Philips

    VR287

    (2 pages)
    2 head mono VCR• Longplay possibility for tape-space saving• Shuttle Control – you can precisely and easily locate a point onthe tape• One-Button automatic installation including auto time setup and correction• Follow TV sorts the channels in the same order as your TV• ShowView™/VideoPlus™– the easiest way to programme a Timer• Digital S …
  • JVC

    HR-J258E

    (52 pages)
    HR-J458EHR-J258EVIDEO CASSETTE RECORDERINSTRUCTIONSLPT0046-001ASEE AUTO SET UPON REAR SIDESEE AUTO SET UPON REAR SIDEPALTVPROG+TVPROG–TV–TV+TV0000STARTDEBUTSTOPFINDATEMENUOKTVPROGTV/VCRDAILY/QTDN.VPS/PDCAUX?WEEKLY/HEBDOPROG30 SEC– –:– –AUDIO12345678902413EXPRESSSTANDBY/ONSP/LPREC LINKTV PROGDICPLAYREVIEWSPVCRVPS/PDCENCONTENTSSAFETY FIRST 2Safety …
  • RCA

    VR354

    (64 pages)
    videocassetterecordervideocassettemcordervideocas_tterecordervideocassetterecordervideocassetterecordervid eocassettereco_cleF_ideocasset_terecordervideo_setterecorder_ideocassettereco_ervideocassetterecordervideocassetterecorder_ideocassetter_cordervldeocassetter_cordervideocassetterecorder_ideocassetter_cordervideocassetter_cordervideocasse_erecorder_ideoc …
  • Panasonic

    AJ-YA120AG

    (56 pages)
    Digital HD Video Cassette Player/RecorderThe unit’s recording function become operational only whenthe AJ-YA120AG (optional accessory) or AJ-YAD120AG(optional accessory) has been installed.VQT0L37-1Before operating this product, please read the instructions carefully and save this manual for future use.Operating InstructionsModel No. AJ- E …
  • JVC

    HR-S8700EK

    (88 pages)
    HR-S8700EKVIDEO CASSETTE RECORDERINSTRUCTIONSLPT0319-001A6251. , / ABC DEFGHI JKL MNOPQRS TUV WXYZ2345678912123VCRTVCABLE/SATTV/VCR– –:– –AUDIO0000STARTDEBUTSTOPFINDATEPRDAILY/QTDN.VPS/PDCAUXWEEKLY/HEBDOEXPRESSLCD PROG0PROGNAVIGATIONOK344MENU30 SECTVPR+TVPR–TV–TV+ENTER/ENTREESYNCHROCONTENTSSAFETY FIRST 2Safety Precautions ........................ …
  • THOMSON

    15LB020S4

    (28 pages)
    Contents1Specifications ........................................................ 3Quick guide ........................................................... 4Sockets on the rear of the unit ................................................. 4Mains power and speaker sockets 30LB020S4.................... 4Connecting to the mains power supply....................... …

Comments, Questions and Opinions: