Manualios.com

Panasonic AJ-EC3P Operating Instructions Manual

Panasonic AJ-EC3P Manual Online:

3.75, 2641 votes
Panasonic AJ-EC3P User Manual
Panasonic AJ-EC3P User Guide
Panasonic AJ-EC3P Online Manual

Text of Panasonic AJ-EC3P User Guide:

  • Panasonic AJ-EC3P, F-13 Ecrans de MAIN MENU 2 de 2 < CAMERA SETTING > DETAIL : ON 2D LPF : OFF SUPER COLOR : ON GAMMA : ON TEST SAW : OFF FLARE : ON H-F COMPE. : ON NEGATIVE DTL : ON ; Ecran CAMERA SETTING < Ecran AUTO SHADING < AUTO SHADING > BLACK WHITE BLACK COMPE. : ON WHITE COMPE. : ON = Ecran DIAGNOSTIC < DIAGNOSTIC > VERSION : Ver< ¢ . ¢ . ¢ > UP DATE : ¢¢¢¢ . ¢¢ . ¢¢ <Remarque> Pour les détails des menus, voir les pages correspondantes du mode d’emploi du camescope utilisé.

  • Panasonic AJ-EC3P, F-11 Ecrans de MAIN MENU 1 de 2 1 Ecran SYNCHRO SCAN < SYNCHRO SCAN > SYNCRO SCAN 1/50.6 2 Ecran VR DATA < VR DATA > MASTER PED : +000 MASTER DTL : +00 MASTER GAMMA : 0.45 KNEE POINT : 085% KNEE SLOPE : +000 B GAIN : +000 R PEDESTAL : +000 B PEDESTAL : +000 <Remarque> Les opérations de réglage des données faisant intervenir la molette d’initialisation ne pourront pas être effectuées sur cet écran. <Remarque> Q uand on ouvre l’écran SKIN TONE DTL, la rubrique SKIN TONE ZEBRA se règle toujours sur OFF, qu’elle ait été précédemment réglée sur ON ou sur OFF. < MATRIX > MATRIX

  • Panasonic AJ-EC3P, F-5 Raccordements du système L’extrémité de câble BNC du câble (fourni) ne sert pas en mode 2 ou 3. On l’acheminera le long du câble à 6 broches et on la fixera. <Remarques> ≥ Pour les détails sur le raccordement du camescope, du moniteur ou de tout autre appareil, voir le mode d’emploi de l’appareil en question. ≥ Avec le modèle AJ-BS900P, il faudra se procurer un câble RCOP vendu séparément. Consulter son revendeur. Modes 2/3 ECU ECU AJ- RB 65 ∫ 1 Camescope Moniteur Câble BNC Câble BNC Câble à 6 broches Vers le connecteur VIDEO IN AJ-EC3P Vers le connecteur ECU Câble (fourni) Vers le connecteur VIDEO OUT (AJ-HDC20A :Vers le connecteur HC

  • Panasonic AJ-EC3P, F-15 Fiche technique Alimentation : 12 V CC Consommation : 125 mA Température ambiante admissible : 0 à 40°C Humidité relative admissible : 85% maximum Dimensions : 82(L) x50(H) x170(P) mm (sans les boutons) Poids : 610 g Informations concernant la sécurité

  • Panasonic AJ-EC3P, E-9 Parts and their functions 1 2 1 CAM/BS connector This is used to connect the unit with the camera recorder or AJ-BS900P. 2 VIDEO OUT connector The video signals with characters added are output to this connector. Connector area

  • Panasonic AJ-EC3P, E-2 English Features 1. The unit can be used to operate the VTR sections of DVCPRO, DVCPRO50 and DVCPRO HD camera recorders. ≥ An ENABLE switch is provided to safeguard against operating errors. ≥ VTR warnings are indicated by an LED. 2. Video signals with characters added (SETUP menus, etc.) can be output from the unit’s VIDEO OUT connector. ≥ Since the SETUP menus are not displayed on the viewfinder of the camera recorder, the camera can be controlled using the AJ-EC3P’s SETUP menus even during shooting. ≥ The SETUP menu screens can be output even when no video signals are supplied. 3. The unit features the following functions a

  • Panasonic AJ-EC3P, E-7 Parts and their functions W.BAL switch PRST : Set to this position if there is no time to adjust the white balance. The 3200K white balance value is stored in the memory as the presetting. A or B : When the = AWB / ABB switch is set to the AWB position, the white balance is automatically adjusted, and the value adjusted is stored in memory A or memory B. The white balance value corresponding to the FILTER control position can also be stored in the memory by setting FILTER INH to OFF. For further de

  • Panasonic AJ-EC3P, E-15 Specifications Power requirements: DC 12 V Consumption: 125 mA Allowable ambient temperature: 32 to 104 F (0 to 40 o C) Allowable relative humidity: 85% or less Dimensions: 3-1/4" (W) x 1-15/16" (H) x 6-11/16" (D) (excluding knobs) (82 (W) x 50 (H) x 170 (D) mm) Weight: 1.34 bs (610 g) indicates safety items.

  • Panasonic AJ-EC3P, English E-10 Menu displays for VIDEO OUT output When the SETUP switch is set to ON, the setting menus are displayed in the VIDEO OUT output. There are two kinds of setting menus, main menus and sub menus. The setting menus are displayed page by page. All the pages contained in these menus and the page configuration are shown below. <Note> ≥ The setting menus are not output from the unit when the AJ-HDC20A is connected. Connect the AJ-HDC20A’s output to the monitor and display the menus on the monitor. ≥ Only th

  • Panasonic AJ-EC3P, F-4 Français Raccordements du système L’appareil se raccorde à un camescope, un moniteur, etc. Les exemples montrent les raccordements du système pour le mode 1 et les modes 2/3. ECU ECU AJ- RB 65 ∫ 1 Mode 1 Camescope Moniteur Câble BNC Câble BNC Câble à 6 broches Vers le connecteur VIDEO IN Vers le connecteur VIDEO OUT Vers le connecteur VIDEO OUT AJ-EC3P Vers le connecteur CAM/BS Vers le connecteur ECU Câble (fourni)

  • Panasonic AJ-EC3P, English E-6 Parts and their functions ENABLE WARNING REW STOP FF ECU ECU AJ- START/STOP PLAY REC CHK ON OFF ON OFF AWB ABB SHUTTER KNEE POINT KNEE SLOPE GAMMA DETAIL SET UP PAINTING ENABLE IRIS GAIN AUTO MANUAL GAIN M.PED CHECK FILTER RB BLACK W.BAL CAM AUTO KNEE ON PRST A B UP OFF ON OFF ON S.S. ( PUSH ) OFF DOWN BARS GAIN S.V 100( 60 ) 120 250 500 1000 2000 65 ∫ 1 I 1 2 3 4 5 6 8 9 : ; 7 < = > ? @ A B C D E F G H J K L M N O P V T R Control panel VTR ENABLE switch This enables the VTR operations 2 through 7

  • Panasonic AJ-EC3P, E-5 System connections The BNC cable end of the cable (included) is not used in mode 2 or 3. Run it alongside the 6-pin cable and secure it. <Notes> ≥ For details on the connection of the camera recorder, monitor or other units, refer to their respective Operating Instructions. ≥ An RCOP cable must be obtained separately if the model AJ-BS900P is going to be used. Consult your dealer. Modes 2/3 ECU ECU AJ- RB 65 ∫ 1 Camera recorder Monitor BNC cable BNC cable 6-pin cable To VIDEO IN co

  • Printed in Japan VQT8843 j i F1000T @ PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic/New England: One Panasonic Way 4E-7, Secaucus, NJ 07094 (2

  • Panasonic AJ-EC3P, English E-14 Shading adjustment When performing shading using the BLACK and WHITE items on the AUTO SHADING screen, proceed with the menu operations using the following black shading example as a reference. < AUTO SHADING > BLACK WHITE BLACK COMPE. : ON WHITE COMPE. : ON ACTIVE OK? YES NO 1. Open the AUTO SHADING page of the sub-menus in MAIN MENU 2 of 2. 2. Align the arrow with BLACK and press the SETUP dial. A confirmation page for checking whether shading is to be performed now appears. 3. When the shading is to be performed, align the arrow with YES and press the SETUP dial. (“SHADING ACTIVE” t

  • English E-8 Parts and their functions C PAINTING ENABLE switch This is used to enable the PAINTING GAIN and BLACK VR controls. B PAINTING GAIN VRs R GAIN and B GAIN controls K INDICATOR This lights when a lens extender is used. L M.PED VR This is used to set the master pedestal. M Number display LED The iris value and the gain or filter positions are displ

  • F-3 Avant l’utilisation Selon le camescope, il est possible que les fonctions de l’appareil soient limitées. En conséquence, avant l’utilisation, vérifier le modèle du camescope et les fonctions qui peuvent être utilisées. <Remarque> Si le modèle que l’on possède ne figure pas dans la liste ci-dessus, consulter son revendeur. AJ-D910WA D610WA Modèle Fonctions q

  • Panasonic AJ-EC3P, F-14 Français Réglage de l’ombrage Pour effectuer l’ombrage avec les rubriques BLACK et WHITE de l’écran AUTO SHADING, procéder comme indiqué ci-dessous dans l’exemple d’ombrage du noir, donné à titre de référence. < AUTO SHADING > BLACK WHITE BLACK COMPE. : ON WHITE COMPE. : ON ACTIVE OK? YES NO 1.Ouvrir la page AUTO SHADING du menu auxiliaire de MAIN MENU 2 de 2. 2.Amener la flèche en regard de BLACK et appuyer sur molette d’initialisation (SETUP). Une page de confirmation s’affiche pour vérifier si l’ombrage doit être eff

  • Panasonic AJ-EC3P, E-3 Before use The unit’s functions may be restricted by the type of camera recorder used. Before use, therefore, check the camera recorder model and the functions which can be used with it. <Note> Consult your dealer if a model not listed in the above table is going to be used. AJ-D910WA D610WA Model Functions which can be used Mode 1 All the unit’s functions can be used. However, any old versions of the software must be upgraded so consult your dealer about this. AJ-HDC20A BS900 Mode 2 Video signals cannot be output f

  • Panasonic AJ-EC3P, E-13 MAIN MENU 2 of 2 < CAMERA SETTING > DETAIL : ON 2D LPF : OFF SUPER COLOR : ON GAMMA : ON TEST SAW : OFF FLARE : ON H-F COMPE. : ON NEGATIVE DTL : ON ; CAMERA SETTING screen < AUTO SHADING screen < AUTO SHADING > BLACK WHITE BLACK COMPE. : ON WHITE COMPE. : ON = DIAGNOSTIC screen < DIAGNOSTIC > VERSION : Ver< ¢ . ¢ . ¢ > UP DATE : ¢¢¢¢ . ¢¢ . ¢¢ <Note> For further details on the menus, refer to the respective pages in the Operating Instructions of the camera recorder being used.

  • Panasonic AJ-EC3P, F-10 Français Affichage des menus de la sortie vidéo Lorsque le commutateur SETUP est réglé sur ON, les menus de réglage s’affichent à la sortie VIDEO OUT. Il y a deux sortes de menus de réglage, les menus principaux et les menus auxiliaires. Les menus de réglage s’affichent page par page. Nous donnons ci-après la liste des pages de ces menus ainsi que la configuration de page. <Remarque> ≥ Si l’on a raccordé l’AJ-HDC20A, les menus de réglage ne seront pas envoyés par l’appareil. Raccorder la sortie de l’AJ-HDC20A au mo

Related Products and Documents (Accessory):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Enabling Devices 1568 Operation & user’s manual enabling-devices/1568-37Y.pdf 19 Jan 2024 3 0.34 Mb
2 MFJ MFJ-993RC Instruction manual mfj/mfj-993rc-J5C.pdf 04 Jul 2023 5
3 Frontier ST0927 Operator's manual frontier/st0927-DG3.pdf 11 Jul 2023 60
4 FujiFilm FinePix S2 Pro Owner's manual fujifilm/finepix-s2-pro-PW9.pdf 06 Jan 2023 65 4.91 Mb
5 Optoma TH1060 Operation & user’s manual optoma/th1060-242.pdf 20 Feb 2024 57
6 Mitsubishi Electric SLZ-KA25 Installation manual mitsubishi-electric/slz-ka25-A44.pdf 20 Sep 2022 16

Similar Resources:

  • Bogen

    SAX1R

    (3 pages)
    SAX1RStereo Aux InputModuleFeatures• Gain/Trim control • Bass and treble• Audio Gating with threshold and duration adjustments• Variable signal ducking when muted or gated• Fade back from mute level• 4 levels of available priority• Can be muted from higher priority modules• Can mute lower priority modules• Stereo signal or mono summed signa …
  • Fluke

    336

    (2 pages)
    TRUE RMS CLAMP METER3371000A600VCATOFFVAVAmpsACOFFVDCVol tsOFFVDCVol tsOFFVAVAmpsACDCVol tsOFFVAVAAOn/OffBacklight On/OffAutomatic Off20 Min1000A600VCATOFFVAVAmpsACINRUSHZEROMIN/MAXHzMAXMINAHzAHzAHz1000A600VCATOFFVAVAmpsDCAHz1000A600VCATOFFVAVAmpsDCAHzAAAAHzAHz1000A600VCATOFFVV,AVAmpsACDCVolt sVV0 - 600.0 V ac0 - 600.0 V dc0 - 6000 HzMAXMIN12336 and 337Clamp …
  • Audiovox

    ARW20

    (2 pages)
    ARW20Universal 2.0 Modular Wireless Speaker Conversion SystemConverts any 2.0 speaker system to a wireless speaker system Easily Expandable – The included full 5.1 channel transmitter easily expands up to 6 receivers per channel. Add additional channels and rooms without the cost or hassles of wiring. Interference Free - 2.4GHz technology keeps wirel …
  • Milwaukee

    2349-20

    (6 pages)
    IMPORTANT SAFETY INSTRUCTIONSPERSONAL SAFETYWORK AREA SAFETYELECTRICAL SAFETY• Avoid dangerous environments. Do not use in rain, snow, damp or wet locations. Do not use inthe presence of explosive atmospheres (gaseous fumes, dust or fl ammable materials) becausesparks may be generated when inserting or re-moving battery pack, possibly causing fi re. • …
  • CHIEF

    Flat Panel Display Accessory Arm FSA-1003

    (1 pages)
    8804-000032 Rev. C 04/20/05 CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected] INSTALLATION INSTRUCTIONS FSA-1003 and KSA-1003 FLAT PANEL DISPLAY ACCESSORY ARM Prior to assembly, unpack carton completely and verify contents. If you are missing any of the following components, please contact Customer Service at 1-800 …
  • LG

    PWMT300

    (14 pages)
    Model: PWMT300 Features:• For flat panel screens• One-touch tilt for effortless positioning and adjustment of the screen• Ultra-slim design holds the screen flat against the wall• IncreLok™ locking tilt positions for specific tilt settings in 5° increments• BLACK. Scratch resistant fused epoxy finish.• Mounts to woo …

Comments, Questions and Opinions: