GE Security DVMRe Pro Operation & User’s Manual

Text of GE Security DVMRe Pro User Guide:

• GE Security DVMRe Pro, 0150-0294B 65 GE Security DVMRe Pro 3.23 The SystemView Menu The SystemView Menu Overview The SystemView menu is provided so that users may quickly view global software and hardware settings. About DVMR menu: This menu provides information such as: • Model Designation • Serial Number • Hostname • Software Version • Software Date • Boot Code Version • Hard Disk Size • IP Address • Hardware Address (MAC) • DHCP Lease Expiration Date • Last DDNS Update Status • Last

• 0150-0294B 20 GE Security DVMRe Pro Searching Recorded Data The DVMRe Pro has a powerful search interface feature that allows the user to search for data on the internal hard disk. The user may search the data for previous recording sessions, text insertion, and alarm conditions. Because the search interface is so dynamic, the search interface is covered in detail in a separate sect

• 0150-0294B 31 GE Security DVMRe Pro 3.4 Menus In This Manual Each menu is covered in detail in this chapter of this manual. Menus and Menu Items appear in the manual in the same order they appear on-screen. • Main Menu • QuickInstall Menu • Operator menu • SystemView Menus 3.5 Navigating The Menu System Selecting a Menu from the Menu Ba

• GE Security DVMRe Pro, 0150-0294B 50 GE Security DVMRe Pro Keystroke count while in the menu system: While recording a macro, entering the menu system, changing multiple menu items, and exiting the menu system are only counted as one keystroke. Using the Jog to navigate the menu system does not count as keystrokes. Once the menu system has been exited, re-entering the menu system will count as a second keystroke. Not all menu items can be programmed using macros. For a complete list of macro programmable menu items, see the table below. During macro recording, the fol

• GE Security DVMRe Pro, 0150-0294B 41 GE Security DVMRe Pro  Main Menu → Record → Record Mode Use this menu to specify how the unit will handle data overwrite issues once the hard disk becomes full. No Overwrite: • Recording starts at the end of the last recording. • Recording stops when disk becomes full. • When the hard disk becomes full, the unit displays an on-screen message indicating that the device is full and that the archive device has stopped recording. The user must acknowledge the message by pressing the Enter butt

• GE Security DVMRe Pro, 0150-0294B 60 GE Security DVMRe Pro  Main Menu → Communications → RS485 Connect several units to a single keyboard, or vice-versa. Up to 32 units (any combination of multiplexers and keyboards) can be networked together. Use this menu to specify the units unique network address. Save changes and exit the menu: Press the Enter button. Exit the menu without making changes: Press the Menu button.  Main Menu → Communications → Ethernet Settings An ethernet connection can be used to

• GE Security DVMRe Pro, 0150-0294B 4 GE Security DVMRe Pro 3.17 Communications.................................................................................................................58 3.18 Front Panel Lock................................................................................................................. 61 3.19 Factory Settings..................................................................................................................62 3.20 Passwords ...........................................................................................................................62 3.21 The QuickInstall Menu

• GE Security DVMRe Pro, 0150-0294B 63 GE Security DVMRe Pro The Ethernet Password The Ethernet Password feature limits access to only those users who access the unit using the password feature of WaveReader versions 2.3 or later. When the unit is first setup, the default is No Password Protection. Meaning, anyone using WaveReader and accessing with an ethernet connection can connect to the unit. Activate The Ethernet Password 1. Enter the new password using the Number buttons. 2. Highlight OK, then pres

• GE Security DVMRe Pro, 0150-0294B 48 GE Security DVMRe Pro Notify Vidloss: Notify Record: Notify Menu Access: Notify Connection: Email User 1: Email Domain 1: Email User 2: Email Domain 2: Local User: Local Domain: SMTP Server: Notify Alarm: Notify Archive: Notify Power Up SMTP Port: john.doe somecompany.com jane.doe somecompany.com 0. 0. 0. 0 DISABLE DISABLE DISABLE ENABLE jim.doe somecompany.com 25 DISABLE DISABLE DISABLE Email Notification Setup Format of email address: user@domain Warning: Region/Time Zone must be set correctly! [ CANCEL] [OK] One or more of these fields must be set to ENABLE to receive an email notification of the selected event. Only if Notify Alarm is set to

• 0150-0294B 82 GE Security DVMRe Pro This feature can be used by Web Developers to link various cameras to specific Web content. It will also be used by the DVMRe Pro’s Email feature to allow the recipient of an alarm email to click on a link in the email, which causes the WaveBrowser to connect and play back at the time when the alarm occurred. Functionality The tradit

• GE Security DVMRe Pro, 0150-0294B 54 GE Security DVMRe Pro ‘ MENU’ : Exit Activity Setup ‘ ENTER’: Save and Exit Activity Setup ‘ PAUSE’: Toggle between Enable and Neutral ‘ STOP’ : Toggle between Disable and Neutral ‘ZOOM’ : Disable/Enable all zones ‘ PLAY FORWARD’: Increase the Sensitivity level “ PLAY REVERSE’: Decrease the Sensitivity level Function Button {F} Sensitivity Scope Use the sensitivity scope to adjust the motion detection sensitivity for the scene. The sensitivity scope is the bar located near the

• GE Security DVMRe Pro, 0150-0294B 12 GE Security DVMRe Pro RJ-45 Pin Configuration For Ethernet Port Pin Use Pin Use 1 TX+ 5 Not Connected 2 TX- 6 RX- 3 RX+ 7 Not Connected 4 Not Connected 8 Not Connected 82345671 RJ-45 socket on back panel. RS232 Port 1 For a Modem connection or remote control of unit. See section 3.16 for information about configuring the modem settings in the menu system. See section 9 for RS232 Remote Control Protocols. DB-9 Pin Configuration For Port 1 Pin Use Pin Use Pin Use 1 DCD 4 DTR 7 RTS 2 RX 5 Ground 8 CTS 3 TX 6 Not Connected 9 Not Conne

• GE Security DVMRe Pro, 0150-0294B 70 GE Security DVMRe Pro LIVE LIVE MODE PLAYBACK MODE PLAY BACK FULL SCREEN ALARM FULL SCREEN ALARM FULL SCREEN ALARM PLAY BACK LIVE ALARM LIVE ALARM LIVE ALARM LIVE ALARM LIVE LIVE Monitor A Monitor A Monitor B Monitor B Recorded Alarms Internal Buzzer: During playback, the internal buzzer is activated until it is silenced and acknowledged. This feature can be turned off in the menu system (see Buzzer Setup, in section 3.10). Front Panel Alarm LED: The LED located to the left an

• GE Security DVMRe Pro, 0150-0294B 87 GE Security DVMRe Pro 8.5 Event Actions All Event messages will be ignored while an Alarm condition exists in the DVMRe Pro. No Event Change – 0000 0000b If both the start and stop bits are clear, there will be no change to the event status. The camera’s record rate will not be changed. Start Event – 0000 0001b If only the start bit is set, an event will be initiated on the selected camera. This will cause the selected camera, as well as any pre-event video to be recorded at the Event Record Rate. Stop Event – 0000 0010b If o

• GE Security DVMRe Pro, 0150-0294B 68 GE Security DVMRe Pro View Screen 8 • Auto Disable: On or Off. • Background Archive: On or Off. • Monitor Setup: Single or Dual. • Baud Rate Port 1: 1200,1400, 4800, 9600, 19200, 38400, and 57600. • Baud Rate Port 2: 1200,1400, 4800, 9600, 19200, 38400, and 57600. • Network Address: 001-005. 001 • Ethernet: Enable or Disable. • POTS: Enable or Disable. • Language: English, German, French, Italian, Russian, Polish, Czech, Finnish, Hungarian, Slovak, Spanish, Dutch, or Danish. • Keyboard Lock: On

• 0150-0294B 38 GE Security DVMRe Pro Pre Event Duration: The unit will record up to 5 seconds of data ahead of the event trigger, at the Event Record Rate. Select from 0 to 5 seconds. Post Event Duration: The unit will record up to 250 seconds after the completion of the Event, at the Event Record Rate. Select from 0 to 250 seconds. Event Associated Cameras: E

• GE Security DVMRe Pro, 0150-0294B 83 GE Security DVMRe Pro 7 Technical Specifications General External Power Supply 12 Volt DC. 60 Watt (5 Amp) Connector 2.1mm barrel connector, center positive. Power Consumption 35 Watt nominal (single disk). Operating Temperature Range Operating: 0 to 40°C. Storage: -20 to +60°C. Relative Humidity Range (Non-Condensing) Operating: 10% to 80%. Storage: 10% to 95% Dimensions Inches: 13 x 14 x 3.5 MM: 330 x 355 x 89 Weight 10 lbs. (4.5 kg) Connections 10/100 Ethernet Port RJ-45 Connector. RS232 Port 1 DB-9 Male Connector.

• GE Security DVMRe Pro, 0150-0294B 53 GE Security DVMRe Pro Link to Event: Selecting Yes in this menu will activate the event record speed when activity detection is present. Intrusion Detection Setup If Intrusion is selected in Motion Detection Type field, the following parameters are enabled: Sensitivity: Rotate the Shuttle to change the motion detection sensitivity, 10 being the most sensitive. Rejection: Configure the unit’s false alarm rejection feature by selecting Low, Medium, or High. These settings are based on the number of simultaneously triggered zones and the persistence of motion in a scene. The Low setti

• GE Security DVMRe Pro, 0150-0294B 52 GE Security DVMRe Pro  Main Menu → Motion Detection → Enable/Disable Detection Selecting Enable All or Disable All from this menu will activate or deactivate motion detection on all cameras. Selecting Individual Enable from this menu will bring up the following menu. Individual Enable Menu Use this menu to enable or disable motion detection on a per camera basis. Rotate the Jog to navigate, and the Shuttle to change the values.  Main Menu → Motion Detection → Setup Parameters Use this menu to select the Camera, Motion Detection

• GE Security DVMRe Pro, 0150-0294B 72 GE Security DVMRe Pro 5.1 Disk Analysis Screen Begin by pressing the Search button. The Disk Analysis Screen will appear. This screen shows a graphical representation of the recorded video stored on the internal hard disk. Search Button Write to CD Record CD Button Disk Analysis Screen Alarm Event Activity Videoloss Present Absent Hit SEARCH again to enter Advanced Search Level 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 01/21/2002 20:17:01 02/28/2002 20:45:00 01/21/2002 2

• GE Security DVMRe Pro, 0150-0294B 79 GE Security DVMRe Pro 6 WebBrowser The DVMRe Pro features an integrated WebBrowser interface. The WaveBrowser option allows the user to view video from any ethernet connected units with software version 4.09 or above. For WaveBrowser to function properly, certain ActiveX controls must be set correctly. To setup the ActiveX controls: 1. Click on the Tools → Internet Options Menu in Internet Explorer. 2. Click on the Security tab. 3. Select Internet for the Web Content Zone. 4. Click on the Custom Level button. 5. Ensure that both Download unsigned ActiveX controls and Initalize and

• GE Security DVMRe Pro, 0150-0294B 69 GE Security DVMRe Pro 4 Alarms 4.1 Alarm Input Alarm devices are connected via the Alarm PCB on the back panel of the unit (see section 1.7). Each Alarm Input corresponds with the Camera Input of the same number. 4.2 Alarm Output Front Panel Alarm LED: The LED located to the left and above the Alarm button is lit for the duration of the alarm. Internal Buzzer: The internal buzzer is activated until it is Silenced and Acknowledged. This feature can be turned off in the menu system (see Buzzer Setup in section 3.10). Monitor Displays:

• GE Security DVMRe Pro, 0150-0294B 16 GE Security DVMRe Pro 9. Camera Selection Number Buttons: Camera numbers 1 through 16. 10. CD Writer or DVD Writer: For recording data to a CDR or DVD+R. 11. Record CD or DVD Button: One-touch archiving of selected video onto a CDR or DVD+R using the built-in CD or DVD-Writer. 12. Print Image Button: One-touch printing of displayed image. 13. Record Button: Used to Start and Stop Recording. 14. Reverse Play Button: Playback in Reverse. 15. Freeze Button (Pause): Freezes camera images on-screen in Live mode. Pauses Playback. 16. Stop Button: To stop Playback and return to Live mode. 17. Play Forward Button: Begins Playback. 18. Search

• 0150-0294B 58 GE Security DVMRe Pro 3.15 Quick Wave Setup This feature provides the option of having the QuickWave software written to any CDs that are created. This allows the CD to be read on any PC without installing software. Select ON to enable, OFF to disable. 3.16 Audio Setup Use this menu to enable or disable the audio feature of the Triplex. Select f

• GE Security DVMRe Pro, 0150-0294B 86 GE Security DVMRe Pro 8.3 Alarm/Event Fields The two least significant bits are currently used for the Event commands. Bits 2 and 3 are used for the Alarm commands. 7 6 5 4 3 2 1 0 M S BL S B Event Start Event Stop A larm Star t A larm Sto p 8.4 Alarm Actions No Alarm Change – 0000 00XXb If both the start and stop bits are clear, the alarm status and camera record rates will remain unchanged. Start Alarm – 0000 01XXb If only the start bit is set, the DVMRe Pro will enter the Alarm mode. The selected camera will become the alarm camera. P

• GE Security DVMRe Pro, 0150-0294B 33 GE Security DVMRe Pro  Main Menu → Time/Date → Set Date Format Rotate the Jog to set the desired date format. Select from either: • MM/DD/YY • DD/MM/YY • YY/MM/DD Press the Enter button to confirm the selection and exit the menu. Press the Menu button to exit the menu without making changes.  Main Menu → Time/Date → Set Time 1. Rotate the Shuttle to navigate, highlight HH MM SS. 2. Press the Enter button, the highlighting will move to the row of numbers. 3. Enter the time in Hours, Minutes, and Seconds. Rotate the Jog to change the values and the Shuttle to naviga

Related Products and Documents (DVD Player):

Comparable Devices:

Similar Resources:

• Denon DVD-1200 (2 pages) High-quality DVD Player with 24-bit, 192-kHz DVD-AUDIO and Progressive ScanNEW MODEL INFORMATIONDVD-1200DVD Audio/Video Player■Progressive Scan featuring DCDi by FaroudjaProgressive Scan technology represents a vast improvement overthe interlaced scanning method used in TV broadcasts and otherconventional applications, as it can process around twice as muc …

• Philips 32ST2200 (2 pages) Philipscommercial TV32"32ST2200Great Looks and Versatile ApplicationsDesigned for two-way interactivity such as guest pay-per-view services and entertainment, this television is virtually future-proof with an integrated SmartCard™ expansion slot that expands TV functions and protects your hardware investmentReduced installation Time• Wireless Smar …

• Samsung DVD-HR753 (105 pages) Instruction ManualDVD-HR753DVD-HR755DVD-HR756www.samsung.com/ukAK68-01370AEnglishΕλληνικάDVD+R The colour of the front panel differs depending upon the model.<HR753/HR756><HR755> …

• Denon DVM-4800 (2 pages) NEW MODEL INFORMATIONDVM-48005-Disc DVD Audio/Video Carousel ChangerTop-quality 5-Disc DVD Audio/Video Changer with AL24 Processing Plus and Progressive Scan®■Carousel Changer SystemIn the DVM-4800’s carousel changer system, any of the other 4 discscan be replaced while one of the discs is in play.■ AL24 Processing PlusThe DVM-4800 uses Denon's n …

• Philips BDP2180K/67 (26 pages) Register your product and get support atwww.philips.com/welcomeAlways there to help youBDP2180KAlways there to help youQuestion?Contact PhilipsQuestion?Contact Philipsคู่มือผู้ใช้ 25User manual 7 …

• LG DP781 - Portable DVD Player (2 pages) www.LGusa.com8 INCH SWIVEL SCREEN WITH HIGH RESOLUTION LCD PANELConvenient swivel and ip LCD screen provides a crystal clear picture.TOUCH PANEL CONTROLSStylish and simple to use touch panel control buttons.USB MEDIA HOSTExperience your digital music (MP3/WMA) and photo library (JPEG) with USB Media Host.LONG BATTERY LIFEUp to 5 hours playback with slim b …

Comments, Questions and Opinions: