Manualios.com

Smeg SSA60MX8 Manual 

Smeg SSA60MX8 Manual Online:

4.4, 990 votes
Smeg SSA60MX8 User Manual
Smeg SSA60MX8 User Guide
Smeg SSA60MX8 Online Manual

Text of Smeg SSA60MX8 User Guide:

  • Smeg SSA60MX8, Instructions for disposal 8 3. ENVIRONMENTAL CARE 3.1 Our environmental care Pursuant to Directives 2002/95/EC, 2002/96/EC, 2003/108/EC, relating to the reduction of the use of hazardous substances in electrical and electronic appliances, as well as to the disposal of refuse, the crossed out bin symbol on the appliance indicates that the product, at the end of its useful life, must be collected separately from other refuse. Therefore, the user must consign the product that has reached the end of its working life to the appropriate selective collection centres for electrical and electronic refuse, or deli

  • Smeg SSA60MX8, 9 Instructions for the user 4. GET TO KNOW YOUR APPLIANCE Cooking hob Control panel Oven seal Oven light (double on some models) Door sensor (on some models only) Rack/tray support frame/guide Fan Roof liner (on some models only) Door

  • Smeg SSA60MX8, 13 Instructions for the user 6. USING THE COOKING HOB 6.1 General warnings and advice Before lighting the hob burners, make sure that the flame-spreader crowns are correctly positioned in their housings with their respective burner caps. Before lighting the burners lift the glass lid (where present); before closing it again, turn off all the burners and wait for them to cool. 6.2 Lighting the hob burners All the appliance's control and monitoring devices are placed together on the front panel. The burner controlled

  • Smeg SSA60MX8, General instructions 7 This appliance must not be controlled using an external timer or remote control system. Be aware of how rapidly the cooking zones heat up. Do not place empty saucepans on the heat. Danger of overheating. Fats and oils can catch fire if they overheat. You are therefore recommended not to leave the appliance while preparing foods containing oils or fats. If fats or oils catch fire, never put water on them. Place the lid on the saucepan and turn off the cooking zone. Take care when using additional electrical appliances in the kitchen (e.g. blender, toaster etc.). Connection cables must not come into contact with hot cooking zones. Do not use steam jets for cleaning th

  • Smeg SSA60MX8, 16 Instructions for the user 7.4 Glass lid (on some models only) The toughened glass lid with aluminium edging protects the hob when not in use. Make sure never to come into contact with the lid glass with pots or pans that are still hot. The glass could crack and break with the heat. The lid must be raised (open) when the oven or hob is being used. Before lighting the burners lift the glass lid; before closing it again, turn off all the burners and wait for them to cool. 7.5 Cooling fan system (on some models only) The appliance is equipped with a cooling system which comes into operation as soon as a co

  • Smeg SSA60MX8, 23 Instructions for the user 9. CLEANING AND MAINTENANCE Do not use steam jets for cleaning the appliance. The steam could reach the electronics, damaging them and causing short-circuits. WARNING: For your safety, you are advised to wear protective gloves while performing any cleaning or extraordinary maintenance. Do not use cleaning products containing chlorine, ammonia or bleach on steel parts or parts with metallic finishes on the surface (e.g. anodizing, nickel- or chromium-plating). We recommend the use of cleaning products distributed by

  • Smeg SSA60MX8, 14 Instructions for the user 6.4 Pan diameters Burner Ø min. (cm) Ø max. (cm) Auxiliary 12 14 Semi-rapid 16 24 Rapid 18 26 Ultra-rapid 18 26 To prevent damage to the appliance or adjacent units, all pans or griddles must be placed inside the perimeter of the hob. Make sure never to come into contact with the lid glass with pots or pans that are still hot. The glass could crack and break with the heat.

  • Smeg SSA60MX8, 29 Instructions for the user 10.3 Removing the door seal (not on pyrolitic models) To permit thorough cleaning of the oven, the door seal may be removed. There are fasteners on all four sides to attach it to the edge of the oven. Pull the edges of the seal outwards to detach the fasteners. The seal must be replaced when it loses elasticity and hardens. 10.4 Removing the internal glass panels The glass in the door should always be kept thoroughly clean. To facilitate cleaning, it is possible to remove the door (see 10.2 Removing the door) and place it on a canvas, or open it and lock the hinges in order to extract th

  • Smeg SSA60MX8, 31 Instructions for the installer 11.2 Room ventilation and combustion extraction The room containing the appliance should have an air supply in accordance with the standards in force. The room where the appliance is installed must have enough air flow as required for the regular combustion of gas and by the necessary air exchange of the same room. The air vents, protected by grills, must be suitably dimensioned in compliance with the current regulations and positioned so that no part of them is obstructed. The appliance must be kept adequately ventilated in orde

  • Smeg SSA60MX8, 19 Instructions for the user 7.8.5 Automatic cooking Automatic cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user. Having selected a function, press and hold ; the display will show the numbers ; press and hold and simultaneously use or to set the required number of minutes. Press and the sum of the current time plus the preset cooking time will appear on the display. Press and hold and simultaneously press or to set the cooking end time. When

  • Smeg SSA60MX8, 17 Instructions for the user 7.7 General warnings and advice for use All cooking operations must be carried out with the door closed. The dissipation of heat may cause hazards. During cooking, do not cover the bottom of the oven with aluminium or tin foil and do not place pans or oven trays on it as this may damage the enamel coating. If you wish to use greaseproof paper, place it so that it will not interfere with the hot air circulation inside the oven. For the best cooking results, we recommend placing cookware in the centre of the rack. To prevent any steam in the

  • Smeg SSA60MX8, General instructions 6 2. SAFETY PRECAUTIONS Consult the installation instructions for safety standards on electrical or gas appliances and for ventilation functions. In your interests and for your safety the law requires that the installation and servicing of all electrical and gas appliances be carried out by qualified personnel in accordance with the regulations in force. Our approved installers guarantee a satisfactory job. Gas or electrical appliances must always be uninstalled by suitably skilled people. Before connecting the appliance to the power grid, check the data on the plate against

  • 30 Instructions for the installer 11.INSTALLATION 11.1 Installing in kitchen units Veneers, adhesives or plastic coatings on adjacent furniture should be temperature-resistant (no less than 90°C). If they are not sufficiently temperature-resistant, they may warp over time. The appliance must be installed by a qualified technician and according to the standards in force. Depending on th

  • Smeg SSA60MX8, 26 Instructions for the user 9.6 VAPOR CLEAN: assisted oven cleaning (on some models only) VAPOR CLEAN is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this process, it is possible to clean the inside of the oven with great ease. The dirt residues are softened by the heat and water vapour for easier removal afterwards. Before starting the assisted cleaning cycle, make sure that the oven does not contain any foods or large spills from previous cooking operations. Carry out assisted oven cleaning opera

  • Smeg SSA60MX8, 11 Instructions for the user 5. AVAILABLE ACCESSORIES NOTE: Some models are not provided with all accessories. Rack: useful for holding cooking containers. Tray rack: to be placed over the top of the oven tray; for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the rack above. Deep oven tray: for baking cakes, pizza and oven-baked desserts. Reduction pan stand: useful when using small pans. WOK reduction: useful when using a wok. The oven accessories intended to come into contact with food are made of materials that comply with the provisions of current legislation. Accessories available on request: • Original

  • 22 Instructions for the user 8.2 Cooking process information table Types of food Weight Function Runner position from the bottom Temperature °C Time (minutes) FIRST COURSES Lasagne 3 kg Static 1 or 2 220 - 230 40 - 50 Oven-baked pasta Static 1 or 2 220 - 230 40 MEAT Roast veal 1 Kg Fan-assisted static 2 180 - 190 70 - 80 Pork loin 1 Kg Static 2 190 - 200 70 - 80 Shoulder of pork 1 Kg Fan-a

  • Smeg SSA60MX8, 36 Instructions for the installer 12. ADAPTATION TO DIFFERENT TYPES OF GAS BEFORE PERFORMING ANY OPERATIONS, SWITCH OFF THE POWER SUPPLY TO THE APPLIANCE. Appliance set for gas: LPG G30/G31 pressure 28/37 mbar (see label on product) In the case of operation with other types of gas, the burner nozzles must be changed and the minimum flame adjusted on the gas taps. To change the nozzles, proceed as described in the following paragraphs. 12.1 Replacement of nozzles on the hob 1 Remove the pan stands, and remove all the burner caps and flame-spreader crowns to access the burner casings. 2 Unscrew the nozzles using a 7 mm socket wrench. 3 Replace the burner nozzles accordi

  • Smeg SSA60MX8, 24 Instructions for the user 9.4.2 Pan stands Remove the pan stands and clean them with lukewarm water and non-abrasive detergent, making sure to remove any encrustations. Dry them thoroughly and return them to the hob. Continuous contact between the pan stands and the flame can cause modifications to the enamel over time in those parts exposed to heat. This is a completely natural phenomenon which has no effect on the operation of this component. 9.4.3 Burner caps and flame-spreader crowns The burner caps and flame-spreader crowns can be removed for easier cleaning. Wash them in warm wa

  • Smeg SSA60MX8, 32 Instructions for the installer 11.3 Gas connection At the end of the installation, check for any leaks with a soapy solution, never with a flame. The tightening torque between connections that incorporate a gasket must be between 10 and 15 Nm. After carrying out any operation on the appliance, check the gas connections are properly tightened. If the appliance is fuelled by LPG gas, use a standards-compliant pressure regulator and connect to the gas cylinder in accordance with the regulations in force. Make sure that the feed pressure complies with the values indicated in the table “12.3 Burner and nozzle characteristics table”. 11.3.1Connection with a rubber hose WA

  • 12 Instructions for the user 5.2 Using the support rack The support rack is inserted into the tray (as shown in the figure). Using this, foods can be cooked and the fat can be collected separately from the food which is being cooked. 5.3 Using the reduction pan stands The reduction pan stands should be placed on top of the hob pan stands as shown in the adjacent figure. Make

  • Smeg SSA60MX8, 38 Instructions for the installer 12.4 Final operations After replacing the nozzles, reposition the flame-spreader crowns, the burner caps and the pan stands. Following adjustment to a gas other than the one originally set in the factory, replace the gas setting label fixed to the appliance with the one corresponding to the new gas. The label is inserted inside the nozzle pack (where present). 12.4.1Adjusting the hob burner minimum for city or natural gas Light the burner and turn it to the minimum position. Extract the gas tap knob and turn the adjustment screw next to the tap rod (depending on the model) until the correct minimum flame is achieved. Refit the knob and

  • 27 Instructions for the user 9.6.2 Setting the assisted cleaning cycle Once the preparations have been made for the assisted cleaning cycle, proceed as follows: 1 Turn the function knob to the symbol and the temperature selection knob to the symbol for the VAPOR CLEAN function. 2 Set a cooking time of 15 minutes using the electronic programmer. 3 At the end of the assisted cleaning cycle,

  • Smeg SSA60MX8, 10 Instructions for the user 4.1 Description of the controls on the front panel 4.1.1 Temperature selection knob The cooking temperature is selected by turning the knob clockwise to the required setting, between 50° and 260°C. The indicator light comes on to indicate that the oven is heating up. When this light goes out, the preset heating temperature has been reached. When the light flashes regularly, it means that the temperature inside the oven is kept steady on the set level. 4.1.2 Function selection knob The oven's va

  • Smeg SSA60MX8, 34 Instructions for the installer 11.4 Electrical connection Make sure the voltage and the cross-section of the power supply line match the specifications indicated on the identification plate positioned on the appliance. Do not remove this plate for any reason. A copy of the plate is attached to the instructions. The appliance must be connected to the power supply by a qualified technician. Before performing any operations, switch off the power supply to the appliance. The appliance must be connected to earth in compliance with electr

  • Smeg SSA60MX8, Contents 1. INSTRUCTIONS FOR USE ..................................................................................................... 4 2. SAFETY PRECAUTIONS ........................................................................................................ 6 3. ENVIRONMENTAL CARE ....................................................................................................... 8 3.1 Our environmental care .................................................................................................................................. 8 3.2 Your environmental care ...............................................................................................................

  • General instructions 5 The appliance becomes very hot during use. Suitable heat-proof gloves should be worn for all operations. Do not use the hob if pyrolysis is taking place inside the oven (where present). If you intend to go away for a prolonged period of time, close the mains gas tap or the gas cylinder tap. Take care that no objects are stuck in the door of t

  • Smeg SSA60MX8, General instructions 4 1. INSTRUCTIONS FOR USE This manual is an integral part of the appliance. It must be kept in its entirety and in an accessible place for the whole working life of the appliance. We urge you to read this manual and all the information it contains carefully before using the appliance. Installation must be carried out by qualified personnel in accordance with the regulations in force. This appliance is intended for domestic use and conforms to the EC directives currently in force. The appliance has been built to carry out the following functio

  • Smeg SSA60MX8, 18 Instructions for the user 7.8 Electronic programmer LIST OF FUNCTIONS Timer key End of cooking key Cooking duration key Value decrease key Value increase key 7.8.1 Setting the time On the first use, or after a power failure, will be flashing on the oven's display. Press the and keys together, and at the same time press the or keys: this will increase or decrease the setting by one minute for each pressure. Press either of the value modification keys to display the current time. 7.8.2 Using the timer Warning: the timer does not stop the cooking operation. It only warns the user that the preset number of minutes have passed. The programmer

  • Smeg SSA60MX8, 25 Instructions for the user 9.5 Cleaning the oven For the best oven upkeep, clean it regularly after having allowed it to cool. • Take out all removable parts. • Clean the oven racks with hot water and non-abrasive detergent. Rinse and dry. • For easier cleaning, the door can be removed (see “10.2 Removing the door”). The oven should be operated at the maximum heat setting for 15/20 minutes after use of specific products, to burn off the residues left inside the oven. When the operation is complete, damp parts should be dried thoroughly. 9.5.1 Removing guide frames (where present) Removing the guide frames enables the sides to cle

Related Products and Documents (Computer Hardware):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony PEGA-CC5 Specifications sony/pega-cc5-1Q9.pdf 04 Dec 2023 1 0.08 Mb
2 Toshiba Tecra M4 Operation & user’s manual toshiba/tecra-m4-6WD.pdf 04 Feb 2024 317 5.29 Mb
3 Danby Premiere DDR4507EE Owner's manual danby/premiere-ddr4507ee-2TR.pdf 08 Feb 2023 26
4 Crestron TSR-310 Do manual crestron/tsr-310-32A.pdf 11 Feb 2024 2
5 Sigma BASE 1200 WL Manual  sigma/base-1200-wl-U49.pdf 12 Jul 2023 2
6 Lenovo 3569 Maintenance manual lenovo/3569-A3E.pdf 11 Jan 2023 128

Similar Resources:

  • Moxa Technologies

    ThinkCore DA-660-8

    (2 pages)
    — 1 — — 2 — — 3— ThinkCore DA-660-8/16-LX Quick Installation Guide First Edition, May 2006 1. Overview ThinkCore DA-660 products are RISC-based ready-to-run embedded computers designed for industrial data acquisition applications. They feature 8 or 16 RS-232/422/485 serial ports and dual Ethernet ports based on the Intel XScale IXP-422 co …
  • Hakki Pilke

    Raven 33

    (42 pages)
    1 HAKKI PILKE RAVEN 33 TRANSLATION VERSION 1 Hakki Pilke Raven 33 FIREWOOD PROCESSOR – Instructions for assembly, operation and maintenance – EC Declaration of Conformity – Safety instructions – Guarantee terms Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 [email protected], www.hakkipilke.fi …
  • Azoteq

    IQS7211AEV02A

    (13 pages)
    Copyright © Azoteq (Pty) Ltd 2022. IQS7211AEV02A User Guide Page 1 of 12 All Rights Reserved. Revision 1.0 February 2022 AzoteqIQ Switch® ProxFusion® Series IQS7211AEV02A USER GUIDE IQ Switch® - ProxFusion® Series …
  • Brainboxes

    BL-500

    (9 pages)
    Print Date: 09.12.2002 Installation Guide BL-500 Bluetooth PCMCIA Card in Windows 2000 Version: 1.0 Brain Boxes Limited, Unit 3C, Wavertree Boulevard South, Wavertree Technology Park, Liverpool, L7 9PF, UK Tel: +44 (0)151 220 2500 Fax: +44 (0)151 252 0446 Web: www.brainboxes.com Email: [email protected]
  • AXIOMTEK

    SBC81210 Series

    (2 pages)
    SBC81210 Series Quick Installation Guide ©Copyright 2011 Axiomtek Co., Ltd. Version A1 September 2011 Printed in Taiwan 94181210010E 4 V. Board Layout Please refer to the SBC81210 Series Product Information CD for the complete User’s Manual, drivers and utilities. User’s Manual and related SBC81210 Series Quick Installation Guide ©Copyright 2011 Axio …
  • NEC

    78K/0 Series

    (129 pages)
    User’s ManualPrinted in Japan©78K/0 SeriesInstructionsDocument No. U12326EJ4V0UM00 (4th edition)Date Published October 2001 N CP(K)1995Common to 78K/0 Series …

Comments, Questions and Opinions: