Manualios.com

Panasonic CF-P2 Operating Instructions Manual

Panasonic CF-P2 Manual Online:

4.3, 1050 votes
Panasonic CF-P2 User Manual
Panasonic CF-P2 User Guide
Panasonic CF-P2 Online Manual

Text of Panasonic CF-P2 User Guide:

  • 60 Connections Remove Programs Remove programs in storage memory. Screen Screen orientation. Touchscreen alignment ( page 18), ClearType and text size settings. Connections Internet connection and Intranet connection settings ( page 35). Network Cards Set up a wireless network. RF Settings Select a radio button for GPRS authentication with [Authentication] tab. You can confirm the radio dri

  • 52 (1) Refer to page 51 and conduct steps (1) to (4). (2) Tap and hold (This icon indicates a serial port) from a service list. (3) Tap [Add Short Cut] to set a short cut. (4) Tap on the command bar and then, tap [Auto Con- nection]. (5) Tap the target device. After starting up Panasonic Bluetooth next time, the Bluetooth connection with the target device will be au- tomatically established. Us

  • 35 You can connect to Internet service provider (ISP), and use the connection to send and re- ceive e-mail messages and view Web or WAP pages. Getting Connected The settings will vary for different network environments. Ask your system administrator or the person in charge of the network and make settings using the followings. 1 Tap - [Settings] - [Connections] tab - [Connections] i

  • 46 Wireless Functions (9) The screen will be updated to show the new connection. (10) If the CF-P2 is not connected with a host computer via a sync cable, then on the navigation bar normally in- dicates the Wireless LAN connection is properly estab- lished. You can also check on [Network Adapters] tab to check if the IP address obtained from DHCP is correct.

  • Panasonic CF-P2, 32 Using the backup function, you can back up data from the CF-P2 RAM to an SD Memory Card, MultiMedia Card, or Flash Storage, or restore data backed up on those storage area to the CF-P2 RAM. Panasonic Backup CAUTION The data in [Messaging] may not be backed up correctly. When you back up and re- store data, some mail contents may be lost. If you need to save the mail data, leave it on the server. Do not do the following during the procedure: • Touching the power switch, any keyboard and touchscreen. Disable the connection wi

  • Panasonic CF-P2, Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. © 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita E

  • Panasonic CF-P2, 37 To change the synchronization settings, tap, in order, - [ActiveSync] - [Tools] - [Options]. Be sure to disconnect the cable when changing the synchronization settings. Disconnect and connect the cable again if communications do not start. For information about the Microsoft ® ActiveSync ® , refer to the Microsoft ® ActiveSync ® Help. NOTE CAUTION While performing communications, avoid the following: • Connect/disconnect the cable. • Turn on/off the CF-P2 and the host computer. When adding a check mark for [Use mobile schedule to sync with this PC] in - [ActiveSync] - [Tools] - [Options] - [PC] tab of

  • Panasonic CF-P2, 3 Contents Operation Starting Up/Shutting Down ................................... 12 LCD (Touchscreen)............................................... 17 Backlight Settings ................................................. 19 Entering Information ............................................. 21 Using T9 ® Text Input .......................................................... 21 Using the Input Panel ........................................................ 24 Using the Keyboard ........................................................... 25 Changing the Assignment of Program Buttons .... 26 Setting to Resume .........

  • Panasonic CF-P2, 5 Names and Functions of Parts The illustrations shown may differ from the actual physical appearances. For detailed settings, tap - [Settings] - [System] tab - [Audio] ( page 59). Power Switch ( page 18) LCD (Touchscreen) By pressing the program button, the program as- signed to the button is started up ( page 26). ( page 17) Stylus Wireless Power LED Indicator Notification LED Indicator ( page 31) When wireless power is on, LED indicator is blinking green. SD Card LED Indicator When the SD card or MultiMedia card is ac- cessed, LED indicator is lighting green. Backspace Button Internal Microphone Light Sensor Brightness of backlight changes according

  • Panasonic CF-P2, 54 Dialer and Telephony Setting of the phone Tap - [Settings] - [Personal] tab - [Phone]. [Phone] tab: Select the type and tone of ring or vibration you want to receive for an incoming call. Choose to hear touch tones or beeps when you press the keyboard. You can also protect your phone from unauthorized use. For security, add a check mark for [Require PIN when phone is used]. • When inputting the PIN code, if the [Cancel] button is tapped, the Phone function cannot be used. To use the Phone function, perfo

  • Panasonic CF-P2, 18 Align the touchscreen if the cursor does not correctly move to the position where the stylus touches the touchscreen of the computer. 1 Tap - [Settings] - [System] tab - [Screen] and tap [Align Screen]. You can also align the screen when + center of the cursor control are pressed. 2 "+" is displayed in the center, upper left, lower left, lower right, and upper right portions of the touchscreen, in that order. Each time the "+" mark is displayed, tap the center of the "+" mark with the stylus. The alignment procedure is executed after the five "+" marks are touched. Handling the Touchscreen Use the provided stylus with CF-P2. Do not use an

  • Panasonic CF-P2, 2 Customer's Record Serial No. or Model No.* Code No. Dealer's Name Dealer's Address Date of Purchase * For the Model No., insert the 12 digit number (for example, CF-P2T1FDF7E) located on the back of the computer. NOTE: NOTE provides a useful fact or helpful information. CAUTION: CAUTION indicates a condition that may result in minor or mod- erate injury. - [Programs]: This illustration means to tap at the top of the screen, then to tap [Programs]. : Where to go for referred information. Some of the illustration

  • Panasonic CF-P2, 31 SD Memory Card/SDIO Card/MultiMedia Card Inserting/Removing a Card An SD Memory Card/MultiMedia Card can be used for the following purposes. The exchange of data with various devices equipped with an SD card/MultiMedia Card slot, audio storage, and so on. 1 Open the SD card* 1 /MultiMedia Card slot cover. * 1 SD card includes an SD Memory Card and an SDIO card. 2 Inserting Slide the card in until it snaps into place as shown in the illustration. Make sure the labeled face of the SD card/MultiMedia Card is towards the front of the computer and then firmly insert the ca

  • Panasonic CF-P2, 8 Names and Functions of Parts Headset and 3.5 DIA plug adaptor Only the CF-VHSP11W (sold separately) can connect to the headset jack. CF-VHSP11W includes A and B. When using a 3.5 DIA plug, B is required. This adaptor can be connected to stereo headphones. Audio output from the internal speaker is disabled when the headset or the 3.5 DIA plug adaptor is connected. * 1 Answer switch Microphone Front Back 3.5 DIA plug A. Headset B. 3.5 DIA plug adaptor * 1 Press for about one second to answer/

  • Panasonic CF-P2, 20 Setting of the LCD Backlight The LCD backlight can be set to turn off automatically (e.g., for conserve power) by setting the timeout function. Individual settings can be made for battery use and The Fast Travel Charger use. 1 Tap - [Settings] - [System] tab - [Backlight]. 2 Battery use setting: Tap the [Battery Power] tab. The Fast Travel Charger use setting: Tap the [External Power] tab. 3 Tap [ok]. Add a check mark so that when the device is not oper- ated, the LCD backlight switches off automatically when the timeout expires. Add a check mark so that tapping the screen turns the LCD backlight on. (Examp

  • Panasonic CF-P2, 45 Wireless Functions (5) At [Networks to access], select [All Available] or [Only access points]. (6) Tap on the access point you want to connect to from the list. [Configure Wireless Network] screen will appear. (7) Tap [Network Key] tab and select [Authentication]. If WEP is enabled: Select [WEP] at [Data Encryption]. Enter the key string in [Network key] and select [Key index], then tap [ok]. If WEP is not enabled: Tap [ok] to return to the previous screen. (8) Tap and hold on the access point you want to connect to, and tap [Connect] on the popup m

  • Panasonic CF-P2, 56 Dialer and Telephony From Contacts Tap - [Contacts] ( page 53). You can also display Contacts by pressing and tap . Tap and hold on the person you want to call, and tap the field from work, home or mobile phone number you want to call. (depending on which fields have been filled in.) Tap on the person you want to call; you can then select a number from among those displayed, and tap on the number you want to call. Receiving calls When receiving a call, the phone will ring and/or vibrate as configured, and a notification bubble will pop up with caller-ID information. When you answer the phone, press or tap [Answer]. When you ignore the phone, press or tap [Ignore].

  • Panasonic CF-P2, 66 Dealing with Problems Tap [Information] tab. The device information is displayed. Tap [State] tab. Information indicating the CF-P2’s usage status is displayed. 3 Tap [Self Test] tab - [Start]. Each item is checked in order. Once the check is completed, a message prompts you to reset the computer. Otherwise, a defect or malfunction may occur. Status information is given before the Diagnos- tic Tool starts. If the status has been changed since the Diagnostic Tool was turned on, the change will not be displayed. NOTE

  • Panasonic CF-P2, 67 Maintenance LCD Do not use water when cleaning the panel. Ingredients included in water may leave residue and reduce readability of the screen. Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause the computer to work improperly or be damaged. <When cleaning dust/dirt> Avoid rubbing off dust/dirt with cloth since it may leave scratch on

  • Panasonic CF-P2, 29 Battery Power CAUTION Ensure that the backup battery is fully charged before replacing the battery pack and replace the battery pack within 30 minutes; otherwise the data in RAM will be lost. Do not touch the terminals of the battery pack. The battery pack may no longer function properly if the terminals are dirty or damaged. Do not expose the battery pack to water, or allow it to become wet. The battery pack is not charged when CF-P2 is first purchased. Be sure to charge it before using it for the first time. When the Fast Travel Charger is connected to CF-P2, charging begins automatically. Use only the specified battery pack (CF-VZSU33U) with CF-P2. Do not install or rem

  • Panasonic CF-P2, 23 Entering Letters in ABC Mode To enter a letter, press the corresponding number key repeatedly until you cycle around to the desired letter. For example, to enter an s, press 7 pqrs four times. Entering Predicted Words* 1 Sometimes T9 places in the selection list predicted words. Predicted words are words T9 thinks you may want to enter, based on text you’ve recently entered. Available in both T9 and ABC mode, predicted words are underlined. If the predicted word you see isn’t the one you want, press the up/down cursor control to view additional predicted words. When you find the one you want, press # to add a space and begin the next word. If none of the predict

  • Panasonic CF-P2, 10 NOTE When the backup battery or main battery becomes low, some alert messages and icons will be displayed ( page 14). Do not remove the main battery before the backup battery is fully charged. Other- wise, data in RAM will be lost. Take care to ensure that the remaining power in the main battery and the backup battery never discharges completely. When any remaining power discharges completely, the computer will no longer function properly, and the computer powers off automatically. Connect the Fast Travel Charger and recharge the battery. If the computer is left for 72 hours or more without recharging, the computer may be fu

Related Products and Documents (Handhelds):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Airlink101 AR430W Quick installation manual airlink101/ar430w-72M.pdf 25 Oct 2023 10 0.41 Mb
2 Flip UltraHD 3rd Generation 1Hr Operation & user’s manual flip/ultrahd-3rd-generation-1hr-S87.pdf 25 Aug 2023 1 6.15 Mb
3 Toshiba MEG-F20 Owner's manual toshiba/meg-f20-QID.pdf 29 Aug 2023 162 13.82 Mb
4 D-Link DIR-632 Operation & user’s manual d-link/dir-632-82C.pdf 16 Oct 2023 197
5 Snapper GT180H Series 4 Safety instructions & operator's manual snapper/gt180h-series-4-VYS.pdf 17 Sep 2022 16 1.35 Mb
6 Radio Shack Auvio 33-268 Operation & user’s manual radio-shack/auvio-33-268-785.pdf 23 Jul 2023 1 0.12 Mb

Similar Resources:

  • Juniper

    Archer

    (22 pages)
    Getting to Know the Archer Note to user: Always use a stylus when using the archer; do not use a pen or pencil. If you lose or break the stylus let us know and we will mail you a new one. Instead of using the stylus you can then use the buttons at the bottom of the archer to input data until a new stylus comes in. Also do not open the archer up for any reas …
  • Intermec

    CN4

    (4 pages)
    多用底座充电器说明多用基座充電器 說明Instructions pour le multisocleAnleitungen für MultidockMultidock の取り扱い説明󱉵󲬥󰯺󱵽󰣩󱥑Instruções para uso da base com vários encaixesИнструкции к многосекционным устройствам дляInstrucciones del multiacoplador¤Óá¹Ð¹ÓÊÓËÃÑ …
  • Unitech

    RH768

    (27 pages)
    Data Collection Terminal - RH768 - User’s Manual 400897G Version 1.0 Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd. …
  • Siemens

    SIMATIC RF310M

    (80 pages)
    Answers for industry.SIMATIC IdentRFID SYSTEMSMobile ReadersFunction Manual · 12/2010Valid for the following products:SIMATIC RF310MSIMATIC RF610MSIMATIC RF680M …
  • Masterpiece Technology

    PDT-1000W

    (22 pages)
    User Manual PDT-1000W Series Copyright @ 2009 Masterpiece Technology (International) Co., Ltd. All rights reserved. Masterpiece Technology (International) Co., Ltd. retain the right to make changes to this manual at any time without notice. Without Masterpiece Technology (International) Co., Ltd written permission shall not be reprod …
  • nomad

    X

    (16 pages)
    1Nomad X, XC, XE Getting Started Guide Welcome This manual has supplemental information to the Nomad™ Getting Started Guide. It covers the additional wireless WAN feature that has been added to this Nomad. This feature will allow you to communicate from field to office, send E-mail messages, send text messages, using a data connection from your local …

Comments, Questions and Opinions: