Getac Z710 Operation & User’s Manual

Text of Getac Z710 User Guide:

• Getac Z710, 4-4 Placing and Receiving Calls (Select Models Only) Responding to a Call When you receive a phone call, the Incoming Call screen opens with the caller ID and any additional information about the caller that you have entered in Contacts. Answering a Call To answer an incoming call, drag the white phone icon to the right toward the green phone icon. Declining a Call To decline an incoming call, drag the white phone icon to the left toward the red phone icon.

• Getac Z710, Getac Applications 6-1 Chapter 6 Getac Applications This chapter describes the applications added by Getac for special features of your device. Barcode Utility and Configuration (Select Models Only) Barcode Utility Barcode Utility is a demo application that can read barcodes of the following types:  Code 39  Code 128  EAN/JAN/UPC  GS1 Databar  Interleaved 2 of 5  PDF417  QR Code  Data Matrix  OCR NOTE: For enhanced applications and customization of the barcode reader, contact

• Getac Z710, Android Preinstalled Applications 5-5 5. To take the picture, touch . 6. The picture you just took is displayed as a thumbnail at the corner. You can touch the thumbnail to view the picture. The file is saved to the internal SD card of your device. Taking Panoramic Pictures NOTE: Panoramic mode is available only for the rear camera lens. 1. Open the Camera application. Touch to switch to Panoramic mode. 2. Aim the camera lens at the starting point of the intended view. Touch to start. 3. Slowly pan your device toward the other side. The status bar shows your progress. 4. T

• Getting Started 1-3 Back Components Ref Component Description See Also  Speaker Plays music, sounds and voices.  Stylus Serves as the input device by tapping on the touchscreen to make selections and enter information. Store it in the slot when not in use. P. 2-2  Flash Provides extra light when taking pictures. P. 5-4 Can als

• Getac Z710, Regulatory Information 9-1 Chapter 9 Regulatory Information NOTE: Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only. Regulations Statements European Notice Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EEC), the Electromagnetic Compatibility Directive (89/336/EEC) and t

• Getac Z710, 2-2 Basic Skills Shutting Down Press and hold the power button until a menu pops up. Touch Power off and then OK. Navigating on the Screen CAUTION: Do not use sharp objects on the touchscreen. Doing so may damage the display surface. Use the included stylus or your finger. NOTE: The stylus can be tethered to your device. Store it in the slot (on the back of your device) when not in use. Use the stylus (or your finger) to navigate and select objects on the screen. Here are some common terms that you should know when using the touchscreen:  Touch Touch the screen once with the stylus to open an item or select an object.

• Getac Z710, 6-4 Getac Applications 2. Touch the name of a symbology to configure. You can enable or disable the individual symbology and configure the options as needed. To restore default settings or enable all symbologies, touch Module. File Manager File Manager allows you to organize your data in the internal SD card and any connected external storage (such as a microSD card or USB disk). Touch the File Manager shortcut on the Home screen or touch File Manager in the All Apps screen. To exit, touch  Exit. Button Descriptions Left side buttons: Buttons Descriptions Home Goes to the root director

• Getac Z710, Getting Started 1-7 Getting Your Device Ready for Use Installing the SIM Card (Select Models Only) 1. Remove the screw from the SIM card cover and flip open the cover. 2. With the SIM card’s chip side facing the back of the device and the beveled corner pointing to the slot, insert the card all the way into the slot. NOTE: To remove the SIM card, slightly push in the card to release it and then pull the card out of the slot.

• Getac Z710, Getting Connected 3-5 5. On the list of discovered devices, touch the ID of the device you want to pair with. 6. The devices pair with each other. If you’re prompted to enter a passcode, try entering 0000 or 1234 (the most common passcodes), or consult the documentation that came with the device to learn its passcode. If the pairing is successful, your device connects to the device. Connecting to a Computer via USB You can connect your device to a computer with the USB cable, to transfer files between your devic

• Getac Z710, Getting Started 1-9  As a battery protection, store the device where the temperature is appropriate. Avoid high temperatures.  The battery can be charged when its temperature is between 0°C (32°F) and 40°C (104°F).  If you will not use the product for a long period of time, be sure to fully charge the battery at least once every two weeks. Over discharge of the battery can affect the charging performance. Performing the Initial Startup When turning on your device for the very first time, you will be guided through a setup process. 1. Make sure that your dev

• Getac Z710, Getting Started 1-11 2. Touch Storage and touch Unmount SD card under EXTERNAL SD CARD. 3. Flip open the microSD card cover. Press the edge of the card to release it and then pull the card out of the slot. Using the Tether A tether is provided for attaching the stylus to your device. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by  below). Then, insert the other end through the first loop (as indicated by  below) and pull it tight. 2. Insert the other loop end to the right-side holder on the device (as indicated by  below). Then, insert the stylus end through the loop (as indicated by

• Getac Z710, 8-2 Caring and Maintenance  Do not drop your device or subject it to severe shock.  Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow your device to dry out completely before use.  The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches.  Never clean

• iv Safety Precautions ................................................................... 9-3 About Charging .................................................................. 9-3 About the AC Adapter ....................................................... 9-3 About the Radio Frequency Exposure ............................... 9-4

• Getac Z710, 3-2 Getting Connected Connecting to Mobile Networks (Select Models Only) Your device supports HSDPA (High-Speed Downlink Packet Access). HSDPA is an enhanced 3G (third generation) mobile telephony communications protocol. It can operate on 850/900/1800/1900/2100MHz. Mobile network is enabled by default. The icons in the Status bar indicate which kind of data network you’re connected to and the voice and data network signal strength. To check or modify settings, touch (on the Home screen)  Settings   More (under WIRELESS & NETWORKS) Mobile networks. Using WLAN Networks Turning WLAN On or Off Touch the widget on the Home screen to turn WLAN

• Basic Skills 2-7 Navigation Bar The navigation bar at the bottom of the screen provides buttons for navigation purposes and frequently-used tasks. Button Name Description See Also F1 Opens File Manager. You can assign a different application to the button. P. 7-5 F2 Opens GPS-ECompass. P. 6-6 You can assign a different application to the bu

• Getac Z710, Android Preinstalled Applications 5-1 Chapter 5 Android Preinstalled Applications This chapter briefly introduces the Android 4.1 preinstalled applications from Google. Applications Overview For instructions on using the applications, check Google official website for online help. Apps Descriptions Calculator Use Calculator to solve arithmetic problems. You can then paste the results into another application. Calendar The Calendar app works with the web-based Google Calendar calendaring service. It also works with the Microsoft Exchange ActiveSync calendaring service. Camera Use Camer

• Getac Z710, Getac Applications 6-5 Buttons Descriptions Multi-Select Enables or disables multiple selections. When enabled, you can touch multiple files or folders for one batch operation. A set of buttons appear on the left side of the screen for you to use. Paste Pastes what you have cut or copied to the current directory. View Switches between icon and list view. Refresh Refreshes the current directory. Upper-right buttons: Buttons Descriptions Search Opens the Search box. Add Folder Adds a folder in the current directory. Menu

• Getac Z710, 1-2 Getting Started Ref Component Description See Also  Light Sensor Senses the ambient light for automatic adjustments of the display backlight.  Indicators Mobile Phone Indicator Flashes in blue to indicate that the phone function (select models only) is switched on. P.3-2 RF (Radio Frequency) Indicator Flashes in blue to indicate that the Bluetooth radio is on. P. 3-4 Flashes in amber to indicate that the WLAN (wireless network) radio is on. P. 3-2 Flashes in purple to indicate that the GPS receiver is on. If more than one module is switched on, the indicator changes

• Getac Z710, 3-6 Getting Connected Adding an Account You can add Google Accounts and Microsoft Exchange ActiveSync accounts in your device so you can sync contacts, email, and calendar events. NOTE: To add some accounts, you may need to obtain details from an IT support representative about the service to which the account connects. 1. Make sure your device is connected to the Internet 2. Touch (on the Home screen)  Settings. 3. Under ACCOUNTS, touch +Add account. 4. Follow the onscreen steps to enter the required and optional information about the account. 5. C

• 7-6 Managing Your Device Item Description Button settings To assign an application to the button instead of using it as a trigger button. GPS See below. SBAS Check to enable SBAS. GPS binary mode Check to set the GPS output format to binary mode. Uncheck to set it to NMEA format. Cold Start To clear all GPS data in the device. G-sensor

• Getac Z710, Getting Connected 3-3 Connecting to a WLAN Network 1. Make sure the WLAN radio is on. (See “Turning WLAN On or Off” previously.) 2. Touch (on the Home screen)  Settings. 3. Touch WLAN. Your device scans for available WLAN networks and displays the names in the screen. 4. On the list of discovered networks, touch the one you want to connect to. 5. If the network is secured, you’re prompted to enter a password or other credentials. If the network is open, you are prompted to confirm that you want to

• 6-2 Getac Applications 1. To configure barcode options, use Barcode Config as described in the next section. 2. Touch the Barcode Utility shortcut on the Home screen or touch Barcode Utility in the All Apps screen. 3. To scan one barcode at a time, touch Trigger To scan continuously, touch Continuous. 4. Aim the green scan beam so that it is centered over the barco

• Getac Z710, 4-2 Placing and Receiving Calls (Select Models Only) Placing a Call Dialing a Call 1. Open the Phone application. Touch if you are not in the phone keypad screen. 2. Touch the keys on the phone keypad to enter phone number. 3. Touch the white phone icon at the bottom of the screen to place the call. Placing a Call from Contacts 1. Open the Phone application. Touch . You will see your contacts list.

More Instructions:

	Getac Z710 Operation & user’s manual 30-07-2023 129	DOWNLOAD
	Getac Z710 Operation & user’s manual 11-08-2022 98	DOWNLOAD
	Getac Z710 Quick start manual 11-04-2023 28	DOWNLOAD

Related Products and Documents (Tablet):

Comparable Devices:

Similar Resources:

• AbleNet Connect (12 pages) Quick Start GuideConnect™www.ablenetinc.com(800) 322-0956PN 98000005 (03/14 Rev. A)PowerSwitchJack 1iPad Sync & Charging JackVolume ControlsHeadphone JackConnect Charging JackStatus LightSwitchJack 2Amplified SpeakerAmplified SpeakerConnect Removable FaceplateiPad not included.Capacitive Touch Switch 2Capacitive TouchSwitch 1Legal©2014 AbleNet, Inc. …

• Huawei P9 Plus (113 pages) Guide de démarrage rapideGuía de inicio rápidoQuick Start GuideSkrócona instrukcja obsługiGhid de pornire rapidăPríručka so stručným návodomSnelstartgids …

• Ployer MOMO9C (35 pages) English User Manual This manual is to introduce the functions of the device, as well as matters which need attention. Please read this manual before you use the device. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device com …

• Sprout Channel Cubby (2 pages) Charge your Sprout Channel Cubby for 6 hours before the first use.Use the included MicroUSB Charger.The battery indicator will show that your device is charging.ChargingPower OnSprout Cubby Setup - Wi-Fi required for set upTurning on Child LockStep 1:Exiting Cubby Mode VolumeCameraSpeakerHDMIMicroSD Card Slot CameraMicro USB portHold for PowerPress to Sleep …

• Big Master Technology 7AGD41 (14 pages) 1. Product ConfigurationOperating system: Android CPU: Quad-core processor Storage memory: 1G DDR2, 8G HDD, 32G external memory maximum support Display: 7-inch IPS screen with a resolution of 1280 * 800, capacitive touch screen, multi-touch Sensor: Gravity acceleration sensors Standard Interface: Micro-USB, 3.5mm earphone jack, DC power jack, HDMI jack, sim …

• Asus VivoTab RT (2 pages) Set up your deviceCharging the battery Connect one end of the USB cable connector to the charging port on the tablet. Connect the other end of the cable to the USB port on the power adapter. Connect the power adapter to an electrical outlet.Installing a microSD™ card Press in and release the protective cover on the microSD card slot. Insert the microS …

Comments, Questions and Opinions: