gfm V07LCD26 Owner's Manual

Text of gfm V07LCD26 User Guide:

• gfm V07LCD26, 30 EN O PTIONAL SETTING Rating Category TV-MA Mature audience only higher TV-14 Unsuitable for children under 14 TV-PG Parental guidance suggested TV-G General audience TV-Y7 Appropriate for all children 7 and older TV-Y Appropriate for all children lower Sub Rating Category Rating FV Fantasy Violence TV-Y7 V Violence TV-PG TV-14 TV-MA S Sexual Situation L Coarse Language D Suggestive Dialogue TV-PG, TV-14 Note: • Blocked sub rating will appear beside the main rating category in “TV Rating” menu. • You cannot block a sub rating (D, L, S or V) if the main rating is set to “View”. • Changing the category to “Block” or “View” automatically changes all i

• gfm V07LCD26, WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING INFORMATION TROUBLESHOOTING 26” Digital / Analog LCD TV Owner’s Manual V07LCD26 TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. HIGH-DEFINITION TELEVISION A71A2UH__EN.indd 1A71A2UH__EN.indd 1 2007/05/30 19:14:372007/05/30 19:14:37

• gfm V07LCD26, 28 EN O PTIONAL SETTING V-chip V-chip reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K / L] to select “DETAIL”, then press [ENTER]. 3 Use [Cursor K / L] to select “V-chip”, then press [ENTER]. Closed Caption Detail Detail Auto V–chip HDMI Audio 4 Use [the Number buttons] to enter the 4-digit numbers for your password. PIN Code Back BACK Enter

• gfm V07LCD26, 18 EN W ATCHING TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. TV In the analog mode, the current channel number and the audio mode are displayed. Press [INFO]. 6 SAP / STEREO TV-PG DLSV 480i 480i 4:3 4:3 SD SD CC CC The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV rating are displayed at the top-right corner of the TV screen. To clear the display, press [INFO] again. You can also press [BACK]. 5 • DTV In the digital mode, the detailed broadcasting

• 5 EN INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING WATCHING TV INFORMATION Contents5 DTV/TV/CATV You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels. Information Display (DTV only) You can display the tit

• gfm V07LCD26, 15 EN W ATCHING TV WATCHING TV INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION Channel Selection Select channels by pressing [CH K / L ] or [the Number buttons]. To select the memorized channels, use [CH K / L] or [the Number buttons]. To select the non-memorized channels, use [the Number buttons]. To Use [the Number buttons] TV When selecting analog channel 12 DTV When selecting digital channel 12-1 Be sure to press [–] before entering the minor channel number. Press [CH RETURN] to return to the previously viewed channel. About digital TV broadcasting: With its high definition broadcast, digital b

• gfm V07LCD26, 26 EN O PTIONAL SETTING CC Style You can change the style of CC such as font, color or size, etc. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K / L] to select “DETAIL”, then press [ENTER]. 3 Use [Cursor K / L] to select “Closed Caption”, then press [ENTER]. Detail Detail Closed Caption Auto V–chip HDMI Audio 4 Use [Cursor K / L] to select “CC Style”, then press [ENTER]. Closed Caption Closed Caption Off Off Conventional CC DTV CC CC Style 5 Use [Cursor K / L] to select “User Setting”, then press [ENTER]. CC Style CC Style Off Font0 Middle White Solid Black Black None Solid User

• gfm V07LCD26, 7 EN INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING WATCHING TV INFORMATION INPUT SELECT SETUP POWER VOLU ME CHANNEL 6 5 2 3 4 1 VIDEO 2 AUDIO VIDEO S-VIDEO R L COMPONENT 1 VIDEO 1 AUDIO YR Pb Pr L AUDIO S VIDEO VIDEO R L COMPONENT 2 AUDIO YR Pb Pr L 6 7 8 10 9 4 5 3 2 1 Control Panel5 Rear Panel5 side of this unit rear of this unit side of this unitrear of this unit 1. POWER button (p12) Press to turn the unit on and off. 2. INPUT SELECT button (p16) Press to access connected an external device like a DVD player or VCR. Pres

• 3 EN INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING WATCHING TV INFORMATION 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. 18. SERVICING - Do not attempt to service th

• 17 EN WATCHING TV INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION Switching Audio Mode This section describes how to switch the audio language. TV 1 Press [AUDIO] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. 6 SAP / STEREO When all audio are av

• gfm V07LCD26, 27 EN WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION [Font Color] Font color of the displayed caption can be switched as below. CC Style CC Style White Black Red Green Blue Yellow Magenta Cyan Closed Caption User Setting Font Style Font Size Font Opacity Back Color Back Opacity Edge Color Edge Type Font Color [Font Opacity] Font opacity of the displayed caption can be switched as below. CC Style CC Style Flash Translucent Transparent Solid Closed Caption User Setting Fon

• gfm V07LCD26, 10 EN C ONNECTION [Component Video Cable Connection] Component video connection offers better picture quality for video devices connected to the unit. Use a component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s COMPONENT 1 video input jack, connect RCA audio cables to the audio L/R jacks of COMPONENT 1. If you connect to the unit’s COMPONENT 2 video input jack, connect RCA audio cables to the audio L/R jacks of COMPONENT 2. COMPONENT VIDEO OUT PrPbY AUDIO OUT RL

• gfm V07LCD26, 34 EN I NFORMATION Cabinet Cleaning • Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces. Panel Cleaning Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord. Servicing Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. T

• gfm V07LCD26, 14 EN I NITIAL SETTING Note: • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. • Channel settings will be saved even if the power fails. • If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use [Cursor K / L] to select “IDIOMA” or “LANGUE”, then press [ENTER]. Use [Cursor K / L] to select “English”, then press [ENTER]. Press [SETUP] to exit the main menu. • With regard only to

• gfm V07LCD26, 23 EN WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION Picture Adjustment You can adjust brightness, contrast, color, tint and sharpness. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K / L] to select “PICTURE”, then press [ENTER]. 3 Use [Cursor K / L] to select the item you want to adjust, then press [ENTER]. Picture Picture Picture Mode Brightness Contrast Color Tint Sharpness Reset Settings Color Temp. Energy Saving Dynamic 30

• gfm V07LCD26, 32 EN T ROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this owner’s manual, check the following chart once before calling for service. 5 Symptom Remedy No power • Be sure the power cord is plugged in. • If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to reset itself. No picture or sound • Check if the power is on. • Check the outlet connection. • Check the antenna or cable connection to the main unit. • When the outside antenna is used, check the wire condition and connectio

• gfm V07LCD26, 31 EN WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION HDMI Audio You can set the method of sound input for the HDMI - IN jack. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K / L] to select “DETAIL”, then press [ENTER]. 3 Use [Cursor K / L] to select “HDMI Audio”, then press [ENTER]. Closed Caption Detail Detail Auto V–chip HDMI Audio 4 Use [Cursor K / L] to select the desired sound input, then press [ENTER]. Detail Detail Closed Caption Auto Digital Analog V–chip HDMI Audio H

• gfm V07LCD26, 19 EN WATCHING TV INTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio. For 4:3 video signal [Sidebar] Display a 4:3 picture at its original size. Sidebars appear on both edges of the screen. [Full] Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen. [Cinema] Displa

• gfm V07LCD26, 9 EN WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION External Device Connection [HDMI Connection] HDMI (High Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to TV is of the highest possible resolution. HDMI OUT Note: • This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals. • This unit accepts only 2 channel audio signal (LPCM). • You need to select “PCM” for the digital audio output of the device

Related Products and Documents (Flat Panel TV):

Comparable Devices:

Similar Resources:

• Samsung UN46C6300 (54 pages) © 2010 Samsung Electronics Co., Ltd. All rights reserved.LED TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________ Serial No. _____________Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsu …

• LG DU-30LZ30 (47 pages) LCD TVSERVICE MANUALCAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.CHASSIS : AL-03HAMODEL : DU-30LZ30website:http://biz.LGservice.come-mail:http://www.LGEservice.com/techsup.html …

• Samsung PPM50H2 (36 pages) AA68-02166A(ENG)Owner’s InstructionsPPM50H2Samsung Electronics America inc.105 Challenger Road, Ridgefield Park, N.J. 07660-0511,U.S.ASERVICE DIVISIONTEL: 1-800-SAMSUNG (1-800-726-7864)www.samsungsupport.com …

• Haier P42A1-AKS (48 pages) Please READ this manual carefully before operating your TV, and retain it for future reference. PLASMA TVOWNER`S MANUALMODEL :P42A1-AK S …

• Samsung Digimax 360 (93 pages) LCD TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel Serial No. BN68-01975A-01Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products, please …

• Samsung HG46NB890XF (52 pages) imagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel Serial No. LED TVInstallation manual [HG890_ZA]Install_Guide-00ENG.indd 1 2013-04-12  5:30:34 …

Comments, Questions and Opinions: