Manualios.com

Panasonic DP-2000 Operating Instructions Manual

Panasonic DP-2000 Manual Online:

3.2, 2402 votes
Panasonic DP-2000 User Manual
Panasonic DP-2000 User Guide
Panasonic DP-2000 Online Manual

Text of Panasonic DP-2000 User Guide:

  • Installation and Configuration (Windows 2000) 67 Printer Section NOTE Configure Port... Add Port... Delete Port ■ Ports Tab Print to the following port(s) Displays a list of ports that allows printing, their status (description), and printers connected to the ports. / button Add or delete a new local port or a new network port

  • Panasonic DP-2000, Installation and Configuration (Windows 95/98/Me) 21 Printer Section Restore Defaults ■ Device Options Tab Security Print Password Set the password for Security Print, to enable the feature. Duplex Unit (Standard on DP-3000) Check this checkbox if the Automatic Duplex Unit (DA-MD200) is installed. Inner Tray Check this checkbox if the Exit Tray (Inner) and the Dual-Path Exit Guide Unit (DA-XN200/FX200) are installed. Specifying inner bins, Inner 1 and Inner 2, is allowed for printing on the printer. Outer Tray Check this checkbox if the Outer Tray (DA-XT200) is installed. Setting of outer option

  • Panasonic DP-2000, Installation and Configuration (Windows 95/98/Me) 11 Printer Section Installing the Printer Driver Next Next 1 Open the Printers dialog box. Click the Start button. Place the cursor on Settings and click Printers. 2 Double-click the Add Printer icon. 3 Click the button. 4 Select Local printer and click the button. • Network printer is specified when a printer on the network is installed. Refer to the Windows 95/98/Me user's manual for details. • If you are using the LPR software to connect this device, select Local printer at this time. You will change to the correct port later.

  • Panasonic DP-2000, Installation and Configuration (Windows 2000) 68 New Driver... ■ Advanced Tab Always available/Available from Specify the operation schedule for a printer. Selecting Available from allows specifying an operation time. Priority Specify the priority in printing. Priority is adjustable from 1 to 99. ORIGINAL of higher priority are printed before those of lower priority. Driver Printer drivers are displayed. Specify a printer being used or specify a printer type that allows emulation by the printer being used. button

  • Panasonic DP-2000, Installation and Configuration (Windows 2000) 80 NOTE Restore Defaults About.. ■ Quality Tab • dpi (dot per inch) means the number of dots contained in one inch. The higher the value is, the higher the resolution becomes. Resolution Select the printer resolution (300/600dpi). Text Color Select the print control of colored text. • Print all text as black All colored text is printed as solid black. • Print colored text with halftone Colored text is printed using shades of gray. button Return all items in the Quality Tab to standard settings (default). button Displays the version informa

  • Panasonic DP-2000, Troubleshooting 97 Troubleshooting NOTE 4 Automatic Duplex Unit (ADU) Open the paper feed guide. Remove misfed paper. • Make sure that the misfeed indicator goes off after removing all misfed paper. 5 Close the right cover.

  • Panasonic DP-2000, Installation and Configuration (Windows 95/98/Me) 14 11 The following step is to Register the LPR Port. for network printing. Before proceeding, ensure that the Printer is installed, connected to the Network, is turned ON and operating properly. Right-click on the "Panasonic DP-2500 PCL" icon in the Printers folder and select Properties from the pop-up menu. The Panasonic DP-2500 PCL Properties dialog box appears. 12 The required files are copied. The Printers icon is now displayed in the Printers folder. You have completed the installation as a local printer. If both the PC and the printer are connected on a network, please contact your network administ

  • Panasonic DP-2000, 31 Printer Section Installation and Configuration (Windows NT 4.0) Installing the LPR (Line Printer Remote) Monitor Click on the Start button, point to Settings, and click Control Panel. The Control Panel window appears. Double-click on the Network applet. The Network dialog box appears. Click on the Services tab. Verify whether the LPR Service is already installed. (Indicated by Microsoft TCP/IP Printing shown in the Network Services: list.) If it is installed, skip to Installing the Printer Driver on Windows NT 4.0 otherwise continue installing the LPR Service.

  • Panasonic DP-2000, Installation and Configuration (Windows NT 4.0) 32 Close Yes Continue 4 Windows NT Setup dialog box appears. Insert the Windows NT 4.0 CD-ROM , and type D:\i386 (where "D:" is your CD-ROM drive). Click on the button. 5 After the files are copied into your Hard Drive, the display returns to the Network dialog box. Confirm that the Microsoft TCP/IP Printing service was added to Network Services: list. Click on the button. NOTE: Delete and Reinstall the Microsoft TCP/IP Printing if an error occurs, and the Microsoft TCP/IP Printing is displayed in the Network Services list, but, the OK button does not change into a Close bu

  • Installation and Configuration (Windows 95/98/Me) 28 NOTE Restore Defaults About... ■ Quality Tab • dpi (dot per inch) means the number of dots contained in one inch. The higher the value is, the higher the resolution becomes. Resolution Select the printer resolution (300/600 dpi). Text Color Select the print control of colored text. • Print all text as black All colored tex

  • Panasonic DP-2000, 87 Troubleshooting Troubleshooting Starting with: If the Panasonic Printing System is not printing or working as expected, and if you are not sure what to do, start your troubleshooting by checking the basics below: • Ensure that the Ethernet LAN (10/100Base-T) Cable is connected properly • Ensure that the programmed Internet Parameter is correct • Ensure that the unit is turned on • Ensure that the Paper is set properly on the unit • No error message is displayed on the unit The above points can be verified by printing a test page. Refer to the following for procedu

  • Panasonic DP-2000, 3 Before Use Table of Contents Table of Contents........................................................................................................... 3 ■ Before Use ................................................................................ 3 Precautions.....................................................................................................................4 External View and Control Panel .................................................................................. 5 ■

  • Panasonic DP-2000, Installation and Configuration (Windows 2000) 63 Printer Section Click the button. 21 The required files are copied. The Printers icon is now displayed in the Printers folder. Yes 20

  • Panasonic DP-2000, Installation and Configuration (Windows NT 4.0) 46 About... NOTE button Displays the version information about the printer driver. • Device Options Tab is specified in the printer properties.

  • Panasonic DP-2000, Installation and Configuration (Windows 95/98/Me) 17 Printer Section Browse... Print Test Page ■ General Tab Comment Enter comments to the properties, if any. If another user sets up this printer on his or her computer when sharing the printer, the comment specified here will also appear on that computer. However, the comment displayed for an already set-up user will remain unchanged even if the comment is modified later. Separator page Inserts a separator page for every document to be printed. This feat

  • Troubleshooting 88 Document is not printed correctly Problem Character is not printing in the correct positions or the characters near the edges of the page are missing. The font type is wrong. The character is not smooth. Fine line print cannot be obtained. Poor photograph print quality. Different character or symbol from the document is printed. Printing

  • Panasonic DP-2000, Installation and Configuration (Windows NT 4.0) 48 Configuring the Printer Driver Settings (User) NOTE Properties... To change the printer settings, open the dialog box of the printer properties by the following steps. • In Windows NT4.0, setting properties depends on the log-in accounts. This section describes properties to be specified by a user, upon executing a print operation on an application. See "Configuring the Printer Driver Settings (Administrator)" for details of administrator properties. (See page ) 1 Select the Print in the File menu of the application. 2 Select DP-2000/2500/3000 in the name box. 3 Click the

  • Panasonic DP-2000, Installation and Configuration (Windows NT 4.0) 49 Printer Section ■ Paper/Layout Tab Paper Size Select a document size. Paper Source Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the printer driver will automatically select an appropriate tray according to the Paper Size. Orientation Select the print orientation (Portrait/Landscape). Copies Specify the number of copies to be printed. If the number of copies to be printed can be specified within the application, indicate one copy here and specify the number of copies in the Print dialog box of the application. DP-3000 Driver only • Printer controlled The print

  • 5 Before Use External View and Control Panel External View Power switch • After connecting all cables and Power Cord, turn the power switch ON. Parallel Interface connector • Connect to the PC Parallel interface cable • (The cable is not supplied with the unit.) Use a cable that meets IEEE1284 specifications, with a maximum length of 20 ft (6m). Consult your aut

  • Panasonic DP-2000, Troubleshooting 99 Troubleshooting NOTE 1 2 ■ ADF/i-ADF Open the ADF cover. Remove misfed paper. Close the ADF cover. • Push the tab on the center of the ADF cover to close it. • Make sure that the misfeed indicator goes off after removing all misfed paper. • Make sure that the misfeed indicator goes off after removing all misfed paper. Open the ADF. Remove misfed paper. Close the ADF.

  • Panasonic DP-2000, Installation and Configuration (Windows 2000) 82 Setting the default Output Tray on the Device REDIAL/ PAUSE ABBR FLASH/ SUB-ADDR SET ORIGINAL COPY SIZE SIZE LEDGER LEGAL INVOICE LETTER LETTER MONITOR RESET START 1 2 3 4 5 6 7 8 9 0 PQRS GHI TUV JKL ABC WXYZ MNO DEF STOP ON LINE ON LINE DATA 2SIDED COPY 1SIDED COPY FAX PRINTER MULTI-SIZE FEED RESOLUTION LINE SELECT ALARM ACTIVE CLEAR ENERGY SAVER DP-2000 INTERRUPT FUNCTION TONE COPY SORT STAPLE SHIFT OUTPUT TRAY DIRECTORY SERCH PAPER TRAY LIGHTER DARKER ZOOM/VOL PHOTO TEXT/ PHOTO TEXT INTERNET P1 z P2 P3 SPACE S-FINE FINE P4 SYMBOLS P5 CAPS 16 u 17 v 18 w 19 x 20 y 11 p 12 q 13 r 14 s

  • Panasonic DP-2000, Installation and Configuration (Windows 95/98/Me) 15 Printer Section 16 The screen reverts to DP-2500 PCL Properties. Check that the "Print to the following port:"was changed as entered, and click on the Apply button first and then on the button. 15 The LPR Port Name dialog box appears. Type the IP Address of the DP-2500 and "lp"as the queue name separated by a ":" Example: 192.168.3.23:lp Click on the button. If an error occurs because the queue name was already used for the same IP Address, select a unique name such as "lpr". 14

  • Panasonic DP-2000, Installation and Configuration (Windows NT 4.0) 44 Permissions Auditing Ownership ■ Security Tab button Set printer access privileges. button Displays the persons who used this printer and how they used. button Set the ownership of the printer. NOTE • In order to utilize these features, you need to have selected Audit... from User Manager's Policies and have enabled File and Object Access in the Audit Policy dialog box.

  • Panasonic DP-2000, Troubleshooting 94 NOTE 1 2 3 ■ Finisher Pull out the finisher. Lift up the lever and clear the paper jam. Return the finisher to original position. • Make sure that the misfeed indicator goes off after removing all misfed paper. • Make sure that the misfeed indicator goes off after removing all misfed paper.

  • Panasonic DP-2000, Installation and Configuration (Windows 95/98/Me) 19 Printer Section button Specify the method of sending (spooling) documents from the program to the printer. Spool Data Type Select spool data type (EMF format or RAW format). Specifying RAW format results in longer time before placing an application operational after printing on the application. Note: Spooling by EMF format (metafile compression) may cause the following problems on some application software. 1) Printing result is different from the screen display.

Related Products and Documents (Copier):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 TeleWell TW-EAV510 Operation & user’s manual telewell/tw-eav510-771.pdf 04 Sep 2023 66
2 Motorola Xoom Operation & user’s manual motorola/xoom-H7D.pdf 09 Feb 2024 39
3 Meritor TE9000 Service Service manual meritor/te9000-service-4DT.pdf 25 Mar 2023 20 0.44 Mb
4 DOD V680L Operating manual dod/v680l-5XP.pdf 25 Mar 2023 30 1.01 Mb
5 JL Audio Stealthbox 94429 Installation manual jl-audio/stealthbox-94429-4B7.pdf 04 Mar 2023 3
6 Haier HB21FW Manuel utilisateur haier/hb21fw-Y2M.pdf 16 Mar 2024 42 9.2 Mb

Similar Resources:

  • Kyocera

    TASKalfa 2551ci

    (12 pages)
    QUICKGuide 2551ciENGPrinted in China 302NP5616001 First edition 2013.7E-Mail operationSending ❶ Press the [Home] key.❷ Press [Send].❸ Place the originals on the platen or in the document processor.❹ Enter the destination address.From the address book:Press [Address Book]. Press the checkbox to select the desired destination from the list. Press [Sea …
  • Xerox

    WORKCENTRE C2424

    (13 pages)
    copier-printerWorkCentre® C2424System BasicsBasisinformatie over het systeemSystem (grundläggande)Om systemetGrundlæggende systeminformationJärjestelmän perustiedotPrintingAfdrukkenSkriva utUtskriftUdskrivningTulostaminenCopyingKopiërenKopieraKopieringKopieringKopiointiScanningScannenSkannaSkanningScanningSkannausTroubleshootingProblemen oplossenFelsö …
  • Ricoh

    Type 2500

    (106 pages)
    Printer/Scanner UnitType 2500Operating InstructionsPrinter ReferenceRead this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read theSafety Information in "About This Machine" before using the machine.Preparing the MachineSetting Up the Printer DriverOther Print OperationsAp …
  • Sharp

    AL-1640 - B/W Laser - Copier

    (60 pages)
    FOR YOUR PROTECTION...To aid in reporting this compact copier in case of loss or theft, please record below themodel number and serial number located on the back of the unit. We also suggest yourecord all the information listed and retain for future reference.MODEL NUMBER SERIAL NUMBERDATE OF PURCHASEDeale …
  • Muratec

    MFX-C3035

    (6 pages)
    WORKGROUP COLORMultifunctional SolutionMFX-C3035Letter8.511Legal8.514Tabloid1117D E P L O Y. D U P L I C AT E . D I G I T I Z E . D E L I V E R .MK3228B U s I n E s s - C L A s s D O C U m E n T s O L U T I O n s …
  • Muratec

    MFX-1350

    (197 pages)
    MAI Order Number: OMF300MML Item Number: DA7-92180-60Printed in China 2007-11© Murata Machinery, Ltd. 2007User’s GuidePlain-paper digital Fax/Copier/Printer/ScannerPlease read this guide before operating this machine.After you finish reading this guide, keep it handy for easy reference.MFX-1350/MFX-1330F-305/F-3003301 East Plano Parkway, Suite 100Plano, T …

Comments, Questions and Opinions: