Panasonic KX-TCD410NL Operating Instructions Manual

Text of Panasonic KX-TCD410NL User Guide:

• Panasonic KX-TCD410NL, 5 Preparation Setting up Battery Charge At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 7 hours before initial use. During charging, the battery icon is as shown below. Fully charged During charging The handset which power is off will be turned on automatically when it is placed on the base unit. In normal use, the handset and the base unit should be powered on at all times. Battery Life Battery life is depe

• Panasonic KX-TCD410NL, 32 Multi-unit User Operation Ringer Mode Selection; Setting the All Handsets Mode Setting the Selected Handsets Mode Setting the Selected then All Handsets Mode The specific handset(s) will ring for a selected number of rings. If not answered, all handsets will ring. • To exit the operation, press any time. • The factory preset is in shade. *1 The factory preset is 0000. *2 The selected handset number flashes. *3 Press dialling button 1 through 6 to enter the number of rings. Before programming, please follow steps 1 to 4. Press MENU. Search/Select "SETTING BS". "INPUT CODE"

• Panasonic KX-TCD410NL, 34 Intercom Intercom between Handsets You can use your handsets as a 2-way intercom. For example, when Handset 1 calls Handset 2. To hang up, press . • Intercom calls can be conducted within the radio cell of the current base unit, but not with units in neighbouring radio areas. Transferring a Call to Another Handset/Conference Call Intercom can be used during a call to transfer an external call between handsets that are registered to the same base unit. For example, when handset 1 transfers a call to Handset 2. To hang up, press . *1 You can also press any dialling button, INTERCOM, t or x . *2 If

• Panasonic KX-TCD410NL, — 6 — Symbols Used in This Operating Instructions Base Unit Settings <Direct command> Symbol Meaning To search the desired item, press UP or DOWN. To select the desired item, press RIGHT. To search and then to select the desired item, press UP or DOWN then RIGHT. To move the cursor to the right or to the left, press RIGHT or LEFT. To go to the next step. " " The words in " " indicate the words in display. Press MENU. Search/Select "SETTING BS". "INPUT CODE&

• Panasonic KX-TCD410NL, 9 Cordless Telephone Using the Telephone Power On/Off Power on Power off *1 When button is released, the display changes to the standby mode. *2 The display goes blank. Making a Call Pre-dialling Post-dialling *1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers. Answering a Call Terminating a Call • Each ringer will start ringing with lower volume then gradually increase the volume when receiving a call. *1 You can also answer a call by pressing any dialling button, INTERCOM, t or x . Setting the Clock/Date After a mains power failure the clock needs to be reset. Ensure that icon is not flashing. • To exit the operation, press any time. *1

• Panasonic KX-TCD410NL, 14 Phonebook You can store up to 20 caller information in the phonebook. If you received a call from the same phone number you stored with a name in the phonebook, the display will show the caller’s name. Storing a Caller Information • To exit the operation, press any time. *1 If you need correction, press RIGHT or LEFT to move cursor then clear character by pressing CLEAR, and/or enter characters. Characters are cleared or added to the left of the flashing character. To enter characters, see Character Selection below. *2

• Panasonic KX-TCD410NL, 16 Phonebook Storing the Phone Number into the Phonebook When Pre-dialling • To exit the operation, press any time. *1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers. *2 To enter characters, see Character Selection on page 14. Storing the Number from the Redial/Caller List into the Phonebook • To exit the operation, press any time. *1 If there is no item stored in the redial/caller list, the display shows "NO ITEM". *2 If you need correction, press RIGHT or LEFT to move cursor t

• 10 Making Calls Redialling The last 10 numbers dialled are stored in the redial list automatically. Dialling with the Redial List Dialling the Last Number Dialled Editing the Dialled Number in the Redial List Clearing One/All Dialled Item(s) in the Redial List • To exit the operation, press any time. *1 If there is no item stored in the redial list, the display shows "NO ITEM&

• 30 Multi-unit User Operation : Handset Registration to a Base Unit Handset Registration The handset supplied with the base unit is already registered. If an optional handset is purchased, it must be registered. Additional KX-A142EX handsets are available to purchase separately. Up to 6 handsets can be registered to a single base unit. Using additional handsets allows you to have an i

• 2 Before Initial Use Thank you for purchasing your new Panasonic digital cordless telephone. Dear purchaser, You have acquired a KX-TCD410NL, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission. This t

• Panasonic KX-TCD410NL, C 21 3 4 5 6 7 8 0 R INT 9 Digital Cordless Phone Operating Instructions Model No. KX-TCD410NL Contents Preparation Before Initial Use ......................... 2 Important Information .................. 3 Setting up .................................... 4 Cordless Telephone Using the Telephone ................... 9 Making Calls.............................. 10 Caller ID .................................... 11 Answering Calls......................... 13 Phonebook ................................ 14 Handset Settings ....................... 18 Base Unit Settings..................... 24

• Panasonic KX-TCD410NL, 18 Handset Settings : Time Alarm You must set the clock before setting the time alarm. Setting Alarm Time Setting Time Alarm On/Off • To exit the operation, press any time. To stop time alarm: Time alarm will sound for 3 minutes. When the alarm sounds, press any dialling buttons or key. Alarm stops and display returns to the standby mode. If "ONCE" is selected, the setting is turned off. When in talk or intercom mode, the alarm will not sound until the call is ended. Before programming, please follow steps 1 to 3. Press MENU. S

• Panasonic KX-TCD410NL, KX-TCD410NL KX-TCD400NL NOTE Please note the following in the Operating Instructions. Page Original Revision 26 (KX-TCD410NL) Storing the Area Code(s)/ Country Code Store the area code(s) for which the chosen carrier (network) service charge rates are lower than the original carrier (network) service. Storing the Area Code(s)/ Country Code Store the area code(s) for which the chosen carrier (network) service charge rates are higher than the original carrier

• Panasonic KX-TCD410NL, 36 Before Requesting Help Problem Possible cause Solution Handset will not ring. • Ringer switched off. • Set ringer to one of 6 volume levels. (see "Handset Settings".) Last number redial does not work. • Number exceeded 24 digits. • Redial manually. No Caller ID number displayed. • Service not supplied. • Caller has withheld info. • Caller ID service must be arranged with Network provider. icon flashes • Battery low. • Recharge batteries. icon is disappeared. • Wrong battery type selected. • Set the correct battery type. Cannot register handset to base. • Max. number of bases already registered to hands

• Panasonic KX-TCD410NL, 22 Handset Settings Setting the Direct Call Number After a direct call number has been set and on, you can dial the direct call number only by pressing TALK. Incoming calls are accepted. Setting the Direct Call On/Off • To exit the operation, press any time. *1 If "ON" is selected, is displayed. : Other Options Changing Handset PIN The factory preset is 0000. Once you have programmed the handset PIN, you cannot confirm it. We recommend you write down the handset PIN. If you forget it, please consult your nearest Panasonic Service Centre. 070-3314500 • To exit the operation, press any time. *1 The factory preset is 0000. Before pro

• 24 Base Unit Settings Changing Base Unit PIN The factory preset is 0000. Once you have programmed the base unit PIN, you cannot confirm it. We recommend you write down the base unit PIN. If you forget it, please consult your nearest Panasonic Service Centre. 070-3314500 Call Restriction You can restrict selected handset(s) from dialling selected phone numbers. You can assign up to 10

• Panasonic KX-TCD410NL, 8 Setting up Wall Mounting This unit can be mounted on a wall. - Insert screws into the wall. The centre of the screw hole should be 8 cm horizontally apart. - Connect the AC adaptor and the telephone line cord. - Arrange the wires as shown, then mount the unit. 8 cm Screws 8 cm Wall Template TCD410NL_E.book Page 8 Thursday, March 20, 2003 5:55 PM

• Panasonic KX-TCD410NL, 4 Setting up Connection Plug in the AC adaptor and the telephone line cord in order 1, 2, 3, 4. • Never install telephone wiring during a lightning storm. Battery Installation Please ensure the batteries are inserted as shown. part should be inserted first. Close the cover as indicated by the arrow. • When you replace the batteries, part should be removed first. The AC adaptor must remain connected at all times (It is normal for the adaptor to feel warm during use). 1 2 3 4 Fasten the AC adaptor cord to prevent it from being disconnected. Hook LINE To replace the battery: Press the notch on the cover firmly and slid

• — 2 — Location of Controls Handset Base Unit Handset Display 1 - : PHONEBOOK Button 2 - TALK Button 3 - Navigator Key (p.6) 4 - REDIAL/PAUSE Button 5 - RECALL Button 6 - : MENU/OK Button 7 - OFF/POWER Button 8 - CLEAR Button 9 - INTERCOM Button C 2 1 3 4 5 6 7 8 0 R IN T 9 9 6 7 8 Charge Contact 2 3 4 1 5 Display Receiver Microphone Charge Contact R C INT L IN E PAGE Button

• Panasonic KX-TCD410NL, 28 Initial Settings : Reset Handset You can reset all of the handset settings to their initial settings. • To exit the operation, press any time. *1 The factory preset is 0000. Handset Initial Settings Function Initial Setting Time Alarm Mode OFF Alarm Time Clear Handset Ringer Volume 6 Handset External Ringer Pattern 1 Handset Internal Ringer Pattern 1 Handset Paging Tone Pattern 1 Handset Alarm Tone Pattern 1 Key Tone ON Call Waiting Tone ON Range Warning Alarm OFF Battery Low Alarm ON Standby Mode Display Clock Talk Mode Display Length of the Call Display Language Dutch Call BAR OFF Direct Call Mode OFF Direct Call Number Clear 4-Digit Handset PIN 0

• Panasonic KX-TCD410NL, 7 Preparation Setting up Location of Controls Handset Base unit Handset Display 1 - : PHONEBOOK Button 2 - TALK Button 3 - Navigator Key 4 - REDIAL/PAUSE Button 5 - RECALL Button 6 - :MENU/OK Button 7 - OFF/POWER Button 8 - CLEAR Button 9 - INTERCOM Button C 2 1 3 4 5 6 7 8 0 R IN T 9 9 6 7 8 Charge Contact 2 3 4 1 5 Display Receiver Microphone Charge Contact R CC INT L IN E PAGE Button and Indicato r Within range of a base unit Out of range/No registration /No power on base unit Paging or using the handset Making or answering calls Phonebook Mode In Setting Mode Battery strength is low. Battery strength is high. Call BAR ON (p.

• Panasonic KX-TCD410NL, 6 Setting up Symbols Used in This Operating Instructions Replacing the Batteries If the icon flashes after a few telephone calls even when the handset batteries have been fully charged, 2 batteries must be replaced. Charge new batteries for approximately 7 hours before initial use. (The telephone line cord must not be connected to the telephone socket at this time.) When replacing the batteries, ensure that the correct battery type is selected. Selecting the Battery Type • To exit the operation, pr

• Panasonic KX-TCD410NL, 23 Cordless Telephone Handset Settings Key Lock You can lock the handset dialling buttons. Only incoming calls are accepted while the key lock is on. The key lock is cancelled if the handset is turned off. When the key lock is on, emergency calls cannot be made until key lock is cancelled. Key Lock On Key Lock Off • is displayed and all dialling buttons are locked. Recall Feature RECALL is used to access special telephone services. Contact your Network provider for details. If your unit is connected to a PBX, pressing RECALL allows you to access some features of your host PBX such as transferring an extension call. Dialling Pause (for PBX line/long distance ser

• Panasonic KX-TCD410NL, 37 Useful Information Technical Information Specifications: • Specifications are subject to change. • The illustrations used in this manual may differ slightly from the original device. Connections: The unit will not work during a power failure. We recommend you connect a standard telephone on the same line for power protection. Standard: DECT=(Digital Enhanced Cordless T elecommunications) GAP=(Generic Access Profile) Number of channels: 120 Duplex Channels Frequency range: 1.88 GHz to 1.9 GHz Duplex procedure: TDMA (Time Division Multiple Access) Channel spacing: 1728 kH

• Panasonic KX-TCD410NL, 26 Base Unit Settings Automatic Route Selection Automatic Route Selection is a feature which selects the least expensive carrier (network) service available, when making long distance calls. When area code(s) have been related to carrier codes, you will need only dial the area code, the lower costing carrier (network) will automatically be dialled. Please contact your telephone company regarding the carrier telephone charges. Storing the Carrier Code(s) Firstly you must subscribe to a second carrier (network) service. Then store the code as follows: Storing the

Related Products and Documents (Cordless Telephone):

Comparable Devices:

Similar Resources:

• Philips SWL6170 (2 pages) PhilipsLine cord50 ftAlmondSWL6170Connect to any phone outletConnect any phone or modem to any wall outlet.Hook up a phone or modem• Connect to any phone outletSuperior technology• Crafted with quality constructionEnvironmentally friendly• Environmentally friendly lead-free construction …

• VTech ia5859 (44 pages) 1Instrucciones importantes de seguridadCuando esté usando su equipo telefónico, siempre debe obedecer las reglas básicas deseguridad para reducir el riesgo de provocar un incendio o sufrir un choque eléctrico ouna lesión, incluyendo las siguientes:1. Deberá leer y comprender todas las instrucciones.2. Siga todas las instrucciones y advertencias marcada …

• Panasonic KX-TG6411FXS (101 pages) © Panasonic Communications Co., Ltd. 2009.Unauthorized copying and distribution is a viola-tion of law.ORDER NO. KM40903872CETelephone EquipmentModel No. KX-TG6411FXSKX-TG6411FXTKX-TG6412FXSKX-TG6412FXTKX-TGA641FXJKX-TGA641FXSKX-TGA641FXTDigital Cordless PhoneJ:Beige Version S:Silver Version …

• Panasonic KX-TG2711E (45 pages) PANASONIC KX-TG 2721SET UP & USER GUIDEFind more user manuals and product information at www.liGo.co.uk/manuals/www.liGo.co.ukFor all the latest product news, reviews and advice from liGo, please visit www.liGo.co.uk/blog/TELEPHONES |HEADSETS |TWO WAY RADIOSPERSONAL CARE |BABY MONITORS |AND MUCH MOREGET £5 OFF*your next purchase over £50with vo …

• Curtis TC972 (19 pages) 2134756890#*abcdefghijklmnopqrstuvwxyzMemo ScanPause ToneTALKFlashRedialIn In UseLow BattPagePowerIn Use/ChgOWNER'S MANUAL2.4 GHz Cordless TelephonePLEASE READ BEFORE OPERATING THIS EQUIPMENTModel : TC972TC972 english.qxd 4/13/2004 10:58 AM Page 1 …

• Motorola ME4066 (29 pages) MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are theproperty of their respective owners. © Motorola, Inc. 2004.User's GuideDigital 1.8 GHzDIGITAL CORDLESSTELEPHONEWITH INTEGRATED DIGITALANSWERING DEVICEModelME4066 Series …

Comments, Questions and Opinions: