Manualios.com

Panasonic AWE300 - COLOR CAMERA Operating Instructions Manual

  • AWE300 - COLOR CAMERA Digital Camera
  • maK68Lu1FD6Ew
  • Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 55

Panasonic AWE300 - COLOR CAMERA Manual Online:

3.2, 2288 votes
Panasonic AWE300 - COLOR CAMERA User Manual
Panasonic AWE300 - COLOR CAMERA User Guide
Panasonic AWE300 - COLOR CAMERA Online Manual

Text of Panasonic AWE300 - COLOR CAMERA User Guide:

  • Panasonic AWE300 - COLOR CAMERA, -19- ■ CONNECTION OF COMPUTER The system shown here can remotely control this camera by using a computer. The software and the cable for RS-232C required for this operation should be obtained locally. Please contact qualified service personnel for this software. – + MENU ITEM/AWC YES/ABC NO/BAR OPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN ON POWER OFF POWER O I FUSE(POWER) 125V 3.15A FUSE FUSE AC Adaptor AW- PS505 DC Power Cable AW-CA4T1 Computer VIDEO OUT Connector AC ADAPTOR AW-PS505 75 Ω Coaxial Cable Composite Video Input Connector (VIDEO IN) Video Monitor RC-232C AC 120 V 50/60 Hz

  • -25- [ADJUSTMENT by CAMERA] 1. Press the NO/BAR switch for over 5 seconds to dis- play the color bar. 2. Select [G/L. Color Bar Set] on the main menu, then select [H PHASE] on the submenu. 3. Adjust the horizontal phase with the YES/ABC and NO/BAR switch. External gen-lock input signal (black burst output of special effect generator) Video signal [ADJUSTMENT with RCU (RCB,

  • Panasonic AWE300 - COLOR CAMERA, -38- ■ Sub Menu (User Mode) **Iris, Shutter, Gain Set** Picture Level ±0 Light PEAK/AVG 0 Light Area Top cut Auto Iris Adjust OFF Shutter Mode (Step) Step (OFF) Syncro Scan --- Field/Frame FIELD Gain (0dB) Pedestal (±0) Return **Detail Set1** Detail (OFF) H Detail Level H +11 V Detail Level H +12 H Detail Level L +7 V Detail Level L +6 Detail Band 2 Noise Suppress 3 Lev

  • Panasonic AWE300 - COLOR CAMERA, -4- DONT'S • Do not attempt to disassemble the camera, Remote Control Unit (RCU) or other units. In order to pre- vent electric shock, do not remove screws or cov- ers. There are no user-serviceable parts inside. • Do not abuse the camera. Avoid striking, shaking, etc. The camera contains sensitive components which could be damaged by improper handling or storage. • Do not let the lens remain uncapped when the cam- era is not in use. If the lens is not installed, do not leave the lens mount hole uncovered. • Do not touch the surface of the lens o

  • Panasonic AWE300 - COLOR CAMERA, Warning: This equipment generates and uses radio frequency ener- gy and if not installed and used properly, i.e., in strict accordance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. This digital apparatus does not exceed the Class A li

  • Panasonic AWE300 - COLOR CAMERA, -17- • To connect the pan/tilt unit to the camera, use the pan/tilt unit cable AW-CA50T15. • Power is supplied from the pan/tilt unit. 1. Before connecting them, press the power switch on the pan/tilt unit AC adaptor and the ON/OFF switch on the hybrid control panel in the OFF position, respectively. 2. Fix the camera securely to the pan/tilt unit using the mounting adaptor. 3. Connect the 50-pin end of the pan/tilt unit cable to the I/F Remote connector on the camera. Connect the 15-pin end of the cable to the pan/tilt unit. 4. Connect the pan/tilt unit to the hybrid control panel with the 10BASE-T cable and co

  • Panasonic AWE300 - COLOR CAMERA, -39- #0 Auto Iris Level Fine Adjustment [Auto Iris Adust: ON/OFF] ON: Fine adjustment of auto iris convergence level can be made with the iris control when the iris switch on the RCU (RCB) or on the hybrid control panel is in the AUTO posi- tion. OFF: The iris control is invalid when the iris switch on the RCU (RCB) or on the hybrid control panel is in the AUTO position. ALL CENTER TOP CUT BOTTOM CUT R/L CUT R B R B PED TOTAL PED A B ATW AWC AUTO HOLD ABC IRIS MAN AUTO 1000 S/S ELC 500 100 OFF SHUTTER SCENE 21 3 USER SET AUTO/ATW PAINTING GAIN RCU (RCB) Iris Control Iris Switch ■ Setting and Changing of th

  • Panasonic AWE300 - COLOR CAMERA, -40- #1 Electronic Shutter Mode Setting [Shutter Mode: Step/ELC/Synchro Scan] Step: Electronic shutter operates at the speed selected by the Electronic Shutter Step Setting #2. ELC: Electronic shutter is controlled to automatical- ly adjust the luminance. Synchro Scan: Electronic shutter operates at the speed selected in Electronic Shutter Synchro- Scan Setting #3. #2 Electronic Shutter Step Setting [Step: OFF/1/100 - 1/10 000] This setting is possible only when Step is selected in Electronic Shutter Mode Setting #1. OFF: Electronic shutter is tu

  • Panasonic AWE300 - COLOR CAMERA, -15- – + MENU ITEM/AWC YES/ABC NO/BAR OPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN ALL 1 2 USER SET ON POWER OFF POWER O I FUSE(POWER) 125V 3.15A FUSE FUSE AC Adaptor AW- PS505 ■ CONNECTION OF A REMOTE CONTROL BOX (RCB) The RCB (WV-CB700A) and the camera must be con- nected with the optional RCB cable AW-CA50T10. 1. Turn RCB power off before connecting cables. 2. Connect the 50-pin connector of the RCB cable to I/F REMOTE connector of the camera. The 10-pin connector must be connected to the RCB. 3. Turn RCB power on and the camera can be con- trolled remotely by the RCB. Notes: • The monitor output signals of the RCB attenuate and d

  • Panasonic AWE300 - COLOR CAMERA, -5- • Take immediate action if ever the camera or RCU should become wet. Turn the power off and have the unit checked by an authorized service facility. • Follow normal safety precautions to avoid personal injury. • Use the camera in an environment where the tem- perature is within −10°C - +45°C (14°F - 113°F), and the relative humidity is within 30 % - 90 %. • Always turn the power off when the camera is not going to be used. Operate the camera and RCU only when there is adequate ventilation. DO'S • Refer any servicing to qualified service personnel. • Handle the camera with care. • Protect the precision made lens by placing the lens cap over when the camera

  • Panasonic AWE300 - COLOR CAMERA, -34- u Black Level Setting [Pedestal: –30 - +30] The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras. i Contrast Adjustment [Contrast (Gamma): LOW/MID/HIGH] Contrast can be adjusted to any of three levels. o Choroma Level adjustment [Chroma Level: –3 - +3] Chroma Level can be decreased or increased to any of three levels each. !0 Skin color adjustment [Flesh Tone: –3 - +3] Skin color can be decreased or increased to any of three levels each. !1 White Balance Setting [White Bal: ATW/AWC A/ AWC

  • -51- Switches: BACK PANEL: MENU, ITEM/AWC, YES/ABC, NO/BAR MENU ITEM SETTING: Gain, Shutter, White Balance, Detail Level (OFF/LOW/HIGH), Corner Detail, Precision Detail Level, Black Stretch, High Light Chroma, Skin Color Detail, Photometric Measurement Method (ALL/CENTER/TOP CUT/BOTTOM CUT/R/L CUT) CCD Read Out Mode (FIELD/FRAME 1/FRAME 2) Creen DNR, Color Bar Setup, Us

  • -42- #6 Black Level Setting [Pedestal: –30 - +30] The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras. #7 Chroma Level Adjustment [Chroma Level: –3 - +3] Chroma Level can be decreased or increased to three levels. #8 White Balance Setting [White Bal: ATW/AWC A/ AWC B/P SET 3 200K/P SET 5 600K] ATW: The white balance i

  • Panasonic AWE300 - COLOR CAMERA, -9- 13. Cable Clamp Clamp the DC Power Supply Cable (AW-CA4T1) connected to the DC 12 V Input Connector to pre- vent it from slipping out. 14. G/L Input Connector (G/L IN) Signals synchronized with the reference signal are to be supplied to this connector when the camera is to be synchronized with the reference signal BB. 15. Optional Card Slot Slot for inserting an optional card. For details, refer to the manual for optional cards. 12. DC 12 V Input Connector (DC 12V IN) 12 V DC is supplied throu

  • Panasonic AWE300 - COLOR CAMERA, -3- 11. A digital highlight chroma circuit reproduces natural dynamic ranges. 12. A digital color matrix enables high fidelity color images. 13. Four use modes for each of your specific applica- tions can be selected. 14. SMPTE color bar is indicated on the monitor screen. 15. Remote control with a RCU, RCB or a Hibrid control panel. • Turn power off before connecting or disconnecting cables. • Connection or disconnection of any studio cable, RCB cable or other cable to any unit of equipment must be performed while power is off. • While the camera is in automatic mode; Shooting of bright objects in ELC operation mode may result in a smeared picture unique to the

  • Panasonic AWE300 - COLOR CAMERA, -50- Pickup element: 1/3" interline, supersensitive CCDx3 Pixels: 768 (H) x 494 (V) pixels Scanning: 2:1 interlace System: NTSC Scanning frequency: 15.734 kHz (horizontal), 59.94 Hz (vertical) Lens mount: 1/3" C mount Synchronizing: Internal or external External sync input: BB, (BNC,50P D subconnector) Sensitivity: 2 000 lx, F8, 3 200 K Minimum illumination: 1.5 lx, F1.4, Night Eye mode Signal-to-noise ratio: 63 dB (DNR ON) Horizontal resolution: 800 TV lines (high band, DTL ON) Regist

  • Panasonic AWE300 - COLOR CAMERA, -24- ■ TOTAL PEDESTAL LEVEL ADJUST- MENT (Use an oscilloscope or a waveform monitor for this adjustment.) This step is to adjust the black levels (pedestal levels) of two or more cameras to be the same. [ADJUSTMENT by CAMERA] 1. Close the lens. 2. Select Pedestal item in the brightness setting Sub Menu (Select [Pedestal] in the [Iris, Shutter, Gain Set] sub menu in USER MODE.) 3. Set the pedestal level to 5 IRE (0.035 V) with the YES/ABC switch or the NO/BAR switch. [ADJUSTMENT with RCU (RCB, Hybrid control panel)] Adjust the pedestal level to 5 IRE with the total pedestal adjustment. **Brightness Set** Picture Level ±0 Light PEAK/AVG

  • Panasonic AWE300 - COLOR CAMERA, -49- Convertible Camera AW – FOCUS LOCK 87A00001 SER NO – + MENU ITEM/AWC YES/ABC NO/BAR OPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN 146 (5-3/14") 10 (25/64") 77 (3-1/32") 10 (25/64") 1(3/64") 84 (3-5/16") APPEARANCE mm (inch)

  • Panasonic AWE300 - COLOR CAMERA, -31- • Settings enclosed in parentheses can be set with the RCU (RCB) switch or VR in RCU (RCB) mode. • To return to the initial settings, refer to page 46. ■ SUB MENU (Halogen Mode, Fluorescent Mode, Outdoor Mode) **Brightness Set** Picture Level ±0 Light PEAK/AVG 0 Light Area Top cut Auto ND (ELC) (OFF) Auto Gain Up (OFF) Manu Gain Up (0dB) Pedestal (±0) Contrast(Gamma) MID Return **G/L. Color Bar Set** H Phase ±0 SC Coarse (1) SC Fine (±0) Color Bar Set (7.5IRE) Return **Other Set**

Related Products and Documents (Digital Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Denver DPT-770 Operation & user’s manual denver/dpt-770-Z4W.pdf 16 Jul 2023 16 1 Mb
2 ViewSonic ViewPad 7 Specification sheet viewsonic/viewpad-7-C16.pdf 19 Feb 2024 2 5.61 Mb
3 Makita BTD136 Technical information makita/btd136-62F.pdf 15 Aug 2023 13
4 Lite Brix Candy Shop Instruction manual lite-brix/candy-shop-HVC.pdf 28 May 2023 24
5 Abocom DPF081 Product specs abocom/dpf081-XK2.pdf 02 Jun 2023 1 4.13 Mb
6 Blaupunkt CD35 7 645 050 510 Operating instructions manual blaupunkt/cd35-7-645-050-510-V1B.pdf 14 Nov 2022 31 0.28 Mb

Similar Resources:

  • Sony

    Cyber-shot DSC-H20

    (2 pages)
    DSC-H20/BCyber-shot® Digital Still Camera PRELIM Sony® Cyber-shot® DSC-H20 digital camera. Featuring Intelligent Auto mode, the H20 with a 10x high zoom lens, automatically detects 8 scene conditions and selects the appropriate camera settings. Face Detection captures faces more naturally and helps prevent blur8. Also, now record high definition videos …
  • Honeywell

    2450Cm Series

    (2 pages)
    HBW2PER2 WDR 1080P IR Bullet Camera Quick Installation Guide Thank you for purchasing a Honeywell Performance Series IP camera. Follow the instructions in this guide to install and log in to your camera. For instructions on configuring the camera, refer to the user guide on the CD that came with your camera. If you require addi …
  • Sony

    Cyber-shot DSC-W710

    (4 pages)
    DSC-W710 NEWTechnische specificaties LensOptical Zoom 5xClear Image Zoom NODigital Zoom Precision Digital Zoom Approx.20x /Smart Zoom 10M Approx.6.3x /5MApprox.8.8x / VGA Approx.36x /2M(16:9) Approx12xF F3.2(W)-6.5(T)Focal Length (f= mm) f=5-25mmFocal Length (f=35mm conversion) f=28-140mmMacro (cm) iAuto:AF(W:Approx.10cm(0.33') toInfinity, T:Approx.100 …
  • Panasonic

    Lumix DMC-LX100

    (104 pages)
    SQT0359M0914KZ0Basic Owner’s ManualDigital CameraModel No. DMC-LX100PPlease read these instructions carefully before using this product, and save this manual for future use.More detailed instructions on the operation of this camera are contained in “Owner’s Manual for advanced features (PDF format)” in the supplied disc. Install it on your PC to read …
  • Panasonic

    DMC-LX7

    (28 pages)
    VQT4J01M0712KZ0Basic Operating InstructionsDigital CameraModel No. DMC-LX7Before use, please read these instructions completely.More detailed instructions on the operation of this camera are contained in “Operating Instructions for advanced features (PDF format)” in the supplied CD-ROM. Install it on your PC to read it.EBWeb Site: http://www.panasonic-eu …
  • Panasonic

    DMC-FT5

    (40 pages)
    Basic Operating InstructionsDigital CameraModel No. DMC-FT5 Please read these instructions carefully before usingthis product, and save this manual for future use.More detailed instructions on the operation of this camera are contained in “Operating Instructions for advanced features (PDF format)” in the supplied CD-ROM. Install it on your PC to read it …

Comments, Questions and Opinions: