Manualios.com

Panasonic DMCTS2 - DIGITAL STILL CAMERA Operating Instructions Manual

  • DMCTS2 - DIGITAL STILL CAMERA Digital Camera
  • maK68Lu1FD6Ew
  • Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 200

Panasonic DMCTS2 - DIGITAL STILL CAMERA Manual Online:

4.55, 800 votes
Panasonic DMCTS2 - DIGITAL STILL CAMERA User Manual
Panasonic DMCTS2 - DIGITAL STILL CAMERA User Guide
Panasonic DMCTS2 - DIGITAL STILL CAMERA Online Manual

Text of Panasonic DMCTS2 - DIGITAL STILL CAMERA User Guide:

  • Others - 190 - • Is this a non-standard picture, a picture which has been edited using a PC or a picture which was taken by another make of digital camera? • Did you remove the battery immediately after picture-taking or did you take the picture using a battery with a low remaining charge? > Format the data to delete the pictures mentioned above. (P41) (Other pictures will be deleted as

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Basic - 50 - Aim the AF area at the subject, and then press the shutter button halfway. A Focus indication B AF area (normal) C AF area (when using the Digital Zoom or when it is dark) D Focus range E Aperture value ¢1 F Shutter speed ¢1 G ISO sensitivity ¢1 If correct exposure cannot be achieved, it will be displayed in red. (However, it will not be displayed in red when the flash is used.) ¢2 Sound volume can be set in [SHUTTER VOL.] (P36). 1 Aim the AF area at the subject, and then press the shutte

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 3 - • [HI-SPEED BURST]..........................82 • [FLASH BURST] ...............................83 • [STARRY SKY] .................................84 • [FIREWORKS] ..................................84 • [AERIAL PHOTO] .............................85 • [PIN HOLE] .......................................85 • [FILM GRAIN] ...................................85 • [HIGH DYNAMIC] .............................86 • [PHOTO FRAME]..............................86 • [UNDERWATER] ..............................87 Recording Motion Picture........................88 • Changing [REC MODE] and [REC QUALITY]................................92 Taking a Picture with Face Recognition Fun

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 183 - Others [BUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY?] • This message will be displayed when you formatted the built-in memory on a PC. > Format the built-in memory on the camera again. (P41) The data on the built-in memory will be deleted. [MEMORY CARD ERROR FORMAT THIS CARD?] • It is a format that cannot be used with this unit. > Format the card again with the camera after saving necessary data on a PC etc. (P41) [PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR] • This message will be di

  • - 193 - Others • Have foreign objects become trapped? > Remove the foreign objects. (P8) • When closing, do not set the [LOCK] switch to the locked side. Doing so may cause damage or leaks. > Release the lock. (P8, 24) • When using the camera in a cold place such as a ski resort, if the camera is left with snow or water drops still on it, the snow

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 107 - Advanced (Recording pictures) Note • “EZ” is an abbreviation of “Extended Optical Zoom”. • A digital picture is made of numerous dots called pixels. The higher the numbers of pixels, the finer the picture will be when it is printed on a large piece of paper or displayed on a PC monitor. A Many pixels (Fine) B Few pixels (Rough) ¢ These pictures are examples to show the effect. • If you change the aspect ratio, set the picture size again. • The Extended Optical Zoom does

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 7 - Before Use Before Use (Important) About the Waterproof/Dustproof and Anti-shock Performance of the Camera • Please observe the following precautions, and avoid using this camera in any situation where the camera is subject to high water pressure. This camera’s waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings. Provided the care and maintenance guidelines described in this document are strictly followed, this camera can operate underwater, to a depth not exceeding 10 m (33 feet) for a time not exceeding 60 minutes. ¢1 • This camera also complies with “MIL-STD 810F (Method 516.5-Shock)”. The came

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 115 - Advanced (Recording pictures) For details on [REC] Mode menu settings, refer to P32. The camera will adjust focus automatically depending on the settings. Applicable Modes: ·¿ ¢ In recording motion pictures, only [ ] (Continuous AF) can be selected. About [ ] and [ ] [ ] will adjust the focus automatically when the jitter of the camera is reduced. [ ] will adjust the focus at all times (Continuous AF operation). The camera will adjust the focus automatically, and the focus adjustment becomes faster when th

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 159 - Connecting to other equipment Note • Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while when the operation icons are displayed. Operation icons are displayed when one of the following buttons is pressed while the operation icons are not displayed. – 3/4/2/1, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button • It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 or more HDMI input termin

  • Connecting to other equipment - 160 - Connecting to other equipment Saving the Recorded Still Pictures and Motion Pictures Methods to export still pictures and motion pictures to other devices will vary depending on the file format. (JPEG, AVCHD Lite, or Motion JPEG). Here are a few suggestions. File formats that can be used: [AVCHD Lite], [Motion JPEG] Copy images played back with this

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 169 - Connecting to other equipment Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. • When you want to print pictures in a paper size or a layout which is not supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{] and then set the paper size or the layout on the printer. (For details, refer to the Operating Instructions of the printer.) • When [PRINT SET (DPOF)] has been selected, the

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Preparation - 28 - The following cards which conform to the SD video standard can be used with this unit. (These cards are indicated as card in the text.) • Only cards bearing the SDHC logo (indicating that the card conforms to SD video standards) may be used as 4 GB to 32 GB cards. • Only cards bearing the SDXC logo (indicating that the card conforms to SD video standards) may be used as 48 GB to 64 GB cards. • Use a card with SD Speed Class ¢ with “Class 4” or higher when recording motion

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 89 - Advanced (Recording pictures) ∫ About focusing When [CONTINUOUS AF] (P122) is set to [ON], and you focus on a subject, the camera will maintain focus on that subject. To fix the focus position when beginning to record a motion picture, set to [OFF]. Note • The screen will change as follows when the motion picture button is pressed in steps 2 and 3. ¢1 Press [DISPLAY] to display the available recording time before recording motion pictures. ¢2 The screen that is displayed during Motion Picture Mode setting is different depending on the setting of th

  • - 121 - Advanced (Recording pictures) For details on [REC] Mode menu settings, refer to P32. Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult. Applicable Modes: ·¿ For details on [REC] Mode menu settings, refer to P32. When the flash is used with the Red-Eye Reduction ([ ], [ ], [ ]) selected, it will au

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Preparation - 36 - • When you connect the camera to a TV, the volume of the TV speakers does not change. • The brightness of the pictures displayed on the LCD monitor is increased so some subjects may appear different from real life on the LCD monitor. However, this does not affect the recorded pictures. • The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD Mode. Press any button to make the LCD monitor bright again. • If the screen is difficult to see because of bright light shining on it, use your hand or another object to block the light. • The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Advanced (Recording pictures) - 114 - ∫ About [ƒ] [1-area-focusing (High speed)] • You can focus on the subject more quickly than in other AF Modes. • The picture may stop moving for a moment before being brought into focus when you press the shutter button halfway. This is not a malfunction. ∫ Setting up [ ] (AF Tracking) Note • Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different subject depending on the recording conditions such as the ones below. – When the subject is too s

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 31 - Preparation Setting the Menu The camera comes with menus that allow you to choose the settings for taking pictures and playing them back as you like and menus that enable you to have more fun with the camera and use it more easily. In particular, the [SETUP] menu contains some important settings relating to the camera’s Clock and Power. Check the settings of this menu before proceeding to use the camera. Note • Due to the camera’s specifications, it may not be possible to set some of the functions or some functions may not work in some of the conditions under which the camera is used. ! [REC] Mode menu

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Advanced (Recording pictures) - 72 - [REC] Mode: Take more effective outdoor pictures By setting the Mode dial to [ ], [ ], or [ ], pictures can be taken more effectively matching the conditions such as sports, snow, beach & surf. Note • The Mode Flash setting is reset to the initial setting when the mode is switched after changing the flash setting between [ ], [ ], and [ ]. • Tone of the color of the image may change when picture is taken with unmatched usage. • The following items cannot be set because the camera automatically adjusts them to the optimal setting. – [I

  • Advanced (Recording pictures) - 98 - Press the shutter button halfway to close the menu. ∫ About the information • When [DISPLAY] is pressed on the recording screen described in step 4 on P97, an explanation appears for taking face images. (Press again to return to the recording screen.) Item Description of settings [NAME] It is possible to register names. 1 Press 4 to

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Before Use - 12 - 1 With the card/battery door and terminal cover closed, rinse with water, or if it was used in the sea, soak the unit in fresh water in a shallow container of for 10 minutes or less. • If you have attached the silicon jacket, be sure to rinse the camera after removing it. • Leaving the camera with foreign objects or saline matter on it may cause damage, discoloration, corrosion, unusual odour, or deterioration. 2 Wipe off the water, and dry the camera by standing it on a dry cloth in a well ventilated sha

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Basic - 58 - [PLAYBACK] Mode: ¸ Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures on the built-in memory or the card, that are being played back will be deleted. To delete a single picture Select the picture to be deleted, and then press [‚]. A [DISPLAY] button B [ ‚] button Press 2 to select [YES] and then press [MENU/SET].

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 37 - Preparation • The [PATTERN] setting is fixed to [ ] in the Intelligent Auto Mode and the Clipboard Mode. • Motion picture recording frame display is only an approximation. • Recording frame display may disappear when zooming to Tele depending on the picture size setting. • This cannot be used during Intelligent Auto Mode. • [AUTO POWER OFF] is set to [5MIN.] in the Intelligent Auto Mode and the Clipboard Mode. • [AUTO POWER OFF] does not work in the following cases. – When using the AC adaptor – When connecting to a PC or a printer – When recording or playing back motion pictures – During

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 47 - Basic It is possible to set the focus to the specified subject. Focus will keep following the subject automatically even if it moves. 1 Press 3. • [ ] is displayed in the upper left of the screen. • AF Tracking frame is displayed in the center of the screen. • Press 3 again to cancel. 2 Bring the subject to the AF tracking frame, and press 4 to lock the subject. • AF tracking frame will turn yellow. • An optimum scene for the specified subject will be chosen. • Press 3 to cancel. Note • [FACE RECOG.] does not work during AF tracking. • Please read th

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Basic - 46 - When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its color changes to the usual red. • [¦] is set if none of the scenes are applicable, and the standard settings are set. • When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s face, and it will adjust the focus and exposure. (Face Detection) (P113) • If a tripod is used, for instance, and the camera has judged that camera shake is minimal when the Scene Mode has been identified as [ ], the shutter speed will be set to a maximum of

  • - 117 - Advanced (Recording pictures) For details on [REC] Mode menu settings, refer to P32. Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken. Applicable Modes: ñ· ¿ [OFF]/[˜] ¢ The Burst speed is constant regardless of the transfer speed of the card. • The burst speed values given above apply whe

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 155 - Connecting to other equipment Preparations: Check the [HDMI MODE]. (P40) Turn this unit and the TV off. 1 HDMI socket 2 TV with HDMI socket 3 HDMI mini (C type) A Align the marks, and insert. B HDMI mini cable (optional) • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction if the connectors of the cable are bent out of shape or plugged in the wrong direction.) Connect the HDMI mini cable B (optional) to the HDMI input socket on the TV. Connect

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 55 - Basic [PLAYBACK] Mode: ¸ Playing Back Pictures ([NORMAL PLAY]) • Speed of picture forwarding/rewinding changes depending on the playback status. ∫ Fast forwarding/Fast rewinding Press and hold 2/1 during playback. • The file number A and the picture number B only change one by one. Release 2/1 when the number of the desired picture appears to play back the picture. • If you keep pressing 2/1, the number of pictures forwarded/rewound increases. ∫ To finish playback Press [ (] again, press the motion picture button or press the shutter button halfway. Press [(]. A [

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, - 101 - Advanced (Recording pictures) [REC] Mode: ñ· ¿ Useful Functions at Travel Destinations For details on the [SETUP] menu settings, refer to P32. If you set the departure date or the travel destination of the vacation in advance, the number of days that have passed since the departure date (which day of the vacation it is) is recorded when you take the picture. You can display the number of days that have passed when playing back the pictures and stamp it on the recorded pictures with [TEXT STAMP] (P140). • The number of days that have passed since the departure date can be printed out using the “PHOTOfunSTUDIO 5.0 HD Edition” bundled software on the CD-ROM (

  • Panasonic DMCTS2 - DIGITAL STILL CAMERA, Preparation - 44 - Press the Shutter button halfway to focus. Press the Shutter button fully (push it in further), and take the picture. ∫ For more details, refer to the explanation of each Recording Mode. Press the Motion Picture button to start the recording. Press the Motion Picture button again to stop the recording. • Sound will go off when pressing the Motion Picture button indicating start/ stop of Motion Picture Recording. Sound volume can be set in [BEEP LEVEL] (P36). • Motion pictures cannot be recorded in Clipboard Mode (P124). ∫ Recording of motion picture appropriate for each Mode is possible. For

Related Products and Documents (Digital Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Blue Rhino GWU9209W Owner's manual blue-rhino/gwu9209w-QT5.pdf 27 Apr 2023 20 3.19 Mb
2 Parasound D/AC-1000 Owner's manual parasound/d-ac-1000-D7P.pdf 21 Mar 2023 8 0.96 Mb
3 VTech Mirage A100 Manual  vtech/mirage-a100-8N5.pdf 29 Nov 2022 27 0.53 Mb
4 Konica Minolta 7145 Specifications konica-minolta/7145-25N.pdf 03 Jan 2024 12
5 JVC GZ-MG20U Getting started jvc/gz-mg20u-T3H.pdf 21 Mar 2023 64
6 FARGO electronics 76500 Operating instructions manual fargo-electronics/76500-L44.pdf 08 Mar 2023 95 1.39 Mb

Similar Resources:

  • Samsung

    S1030

    (96 pages)
    Gracias por la compra de su Cámara Fotográfica Samsung. Este manual le orientará en la utilización de la cámara, en la captura de imágenes, en la descarga de imágenes y en la utilización del software de aplicación. Sírvase leer este manual antes de usar su nueva cámara fotográfica.Manual de usuarioESPAÑOL …
  • Lumens

    VC-A50P

    (7 pages)
    VC-A50P Camera Upgrade Installation Guide Quick Installation Guide .................................. 2 Complete Installation Guide............................. 3 …
  • CIS

    VISION:mini VCC-GC20V41CL

    (22 pages)
    VCC-GC20V41CL Rev.900-721-32-00 ©2011 CIS Corporation. All rights reserved. 29mm cubic VGA High-Speed B/W CMOS Camera VCC-GC20V41CL Product Specification & Operational Manual CIS Corporation EnglishCompliments of Phase1tech.com …
  • Okina

    Eco Series

    (2 pages)
    ESDX-3420-VD_rev11212008 Operational Manual 3-AXIS Mini Vandal Dome Color Camera z 1/3” Sony Super HAD CCD z 420 TV Lines z 3.6mm Board Lens z 0.3 Lux @ F2.0 z 3-AXIS design for any angle z 12V DC 1. Never point the camera toward the sun Do not expose the lens directly to the sun or to strong light as this may damage the pick-up …
  • Cobra Digital

    DVC5100

    (1 pages)
    12 MP DIGITAL VIDEO CAMERA 5 in 1 Camera including Still Digital / MP3 Player / Digital Video w/sound / Audio Recorder / Personal Media Player Video @ 30fps - 4X Digital Zoom - 2.4” Color Display Model DVC 5100 Specifications • Output Resolution 12MegaPixel / 5MegaPixel / 3.1MegaPixel/ 1.2MegaPixel / VGA • Image Sensor 2046x1536 Pixels CMOS Se …
  • Canon

    EOS 700D

    (388 pages)
    INSTRUCTION MANUALThe “Quick Reference Guide” is included at the end of this manual.INSTRUCTIONMANUALENGLISHwww.devicemanuals.euwww.devicemanuals.euwww.devicemanuals.eu …

Comments, Questions and Opinions: