Manualios.com

Gigafast WF711-APR Operation & User’s Manual

Gigafast WF711-APR Manual Online:

3.15, 814 votes
Gigafast WF711-APR User Manual
Gigafast WF711-APR User Guide
Gigafast WF711-APR Online Manual

Text of Gigafast WF711-APR User Guide:

  • GigaFast Ethernet Section 6 Service Time Allocation “Service Time Allocation” allows the administrator to control the Wireless Router’s LAN-to-WAN if the service is available or disabled at any time. This feature is implemented by two mechanisms. One method is to specify the maximum continuous service period. This is primarily used for parental control in home/famil

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 1) : The application sends a packet out first to the trigger port. 2) : All the incoming packets to the specified ports are allowed to pass the firewall. Trigger Port Incoming Ports There are several predefined well know applications listed on the top of the settings page. Select an application and Click the “Copy to” index ID. Each trigger port is used by only one LAN PC at a time. Once a trigger is occupied, a second LAN PC cannot use that trigger port until the first LAN PC has release

  • Gigafast WF711-APR, GigaFast Ethernet Appendix A Appendix C: Cabling and Pin Assignment 1. RJ-45 There are different grades, or categories, of twisted-pair cabling. Category 5 is the most reliable and is highly recommended. Category 3 is a good second choice. Straight-through cables are used for connecting computers’ NIC card to a hub. Crossover cables are used for connecting a hub to another hub. (The Wireless Router provides a built-in uplink/normal switch. Uplink mode is crossed internally, which allows you to link or connect hubs together with a straight-through cable) RJ-45 pin assignment There are 8 thi

  • Gigafast WF711-APR, GigaFast Ethernet Appendix A Appendix D: Configure IP manually Select IP Address tab, and choose Specify an IP Address. Type in your customized IP address. (The default IP address of this product is 192.168.8.1, so you can type in an IPAddress like 192.168.8.xxx where xxx can be numbers from 1 to 253) Set the Subnet Mask as 255.255.255.0. In the Gateway tab, add the IP address of this router. (The default IP Address is 192.168.8.1)

  • Gigafast WF711-APR, GigaFast Ethernet Connect the network cable from the Cable/ DSL modem to the WAN port of the Wireless Router (Fig 2-1). If the Link/Act LED is off, please check the feeding power and the connection cable between the Cable/DSL modem and WAN port (Please refer to Appendix C for detailed cabling and pin assignment). Section 3 Installation Fig 2-1 The hardware connection of WAN interface for the Wireless Access Point Router Hardware Connection to WAN Attach the power cord into the inlet first and follow these sections to set up the WAN/LAN connection. Cable/

  • Gigafast WF711-APR, GigaFast Ethernet Section 3 WAN DC inM1Reset1234 Lan Adapter Lan Adapter Lan Adapter HUB Fig 2-1 The hardware connection of the LAN interface for the Wireless Access Point Router Please use a crossover RJ-45 cable if you want to connect the LAN port to another hub or switch. Once both the WAN/LAN are connected successfully, hold down the reset button for at least 5 seconds to make sure the Wireless Router is in factory default condition. Network Setting in Administrator’s computer In order to configure the Wireless Router with a networked PC in LAN, it is necessary for the administrator to have accurate network se

  • Gigafast WF711-APR, GigaFast Ethernet Section 5 The is left as 0 for most applications. Check with your ISP for correct setting if there are problems. The Wireless Access Point Router will attempt to connect with the ISP if (1) there is at least one LAN user trying to access the Internet and (2) the current WAN connection is disconnected. Fill in a time period in seconds if you want to disconnect automatically when your Internet connection is idle for more than that period of time. PPTP connection ID Dial on Demand: Auto disconnect when idle over _ sec: EZ

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 11. Can I use my own public IPs and Domain or do I have to use the IPs provided by this router? 12. What are the advanced features of the Wireless Access Point Router? 13. Does the Wireless Access Point Router support ALG (Application Layer Gateway) functions? You can customize your own IPs through configuration of this router. The advanced features of the router include . Yes, the following ALG functions are supported. FTP : passive mode and port command mode. Conferencing : MS NetMeeting, H.323 pass though. Instant Messenger : MS Windows messenger, XP messenger, Yahoo, ICQ, AOL. L2-VPN : PPTP client mode, PPTP p

  • Rear Panel 1-4 WAN Reset RDY DC in Ports for connecting to PCs. Use straight through cables Port for connecting to Cable/DSL modem Reset to factory default settings button. Hold down continuously for at least 5 seconds to reset the hardware. The LAN IP becomes 192.168.8.1 by default Flashes when the system is ready Plug in power cord here GigaFast Ethernet Section 2 WAN DC inRDY Reset 1234

  • GigaFast Ethernet Section 6 Virtual Server Generally, NAT based routers/firewalls filter out all unrecognized packets from the WAN to protect your Internal LAN computers; therefore, all LAN computers behind the Wireless Router are invisible to the outside Internet. However, some Internet servers (like WWW, FTP, E-mail) should be visible and accessible by the outside Internet.

  • Gigafast WF711-APR, GigaFast Ethernet Section 3 Step 2: Step 3: Click the Properties button, and then click the IP Address tab. Select Obtain an IP address automatically. Press [OK] ro continue. System may request to restart. After restart, the connection between the Wireless Access Point Router & window is established. Please check it as follows. Start -> Control Panel -> Run Type “winipcfg”, and then press [ok] button. Windows 9x/ME:

  • GigaFast Ethernet Section 6 Multiple DMZ Host If the WAN connection type is static and there is a range of IP addresses assigned to the WAN interface instead of a single IP only (please refer to section 3.1), then the Wireless Router allows 8 computers in the LAN to become DMZ hosts. In general, the mechanism for multiple DMZ hosts is based on the mapping relation between the W

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 For example, if the ISP provides 210.65.226.1 through 210.65.226.7 IP (subnet mask is 255.255.255.248), then the subscriber can have 6 computers at most accessing the Internet simultaneously. With the Wireless Router, additional computers can access the Internet. (Please refer to Fig 4-1) Fig 4-1 Bridging mode Unfortunately, the multiple DMZ host will not work with the Fig 4-1 configuration because the Wireless Router can only handle one IP address’ packets, not 5 IP address’ packets. In

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 3. : PPPoE (point to point protocol over Ethernet) connection means that personal users can browse the Internet through DSL-based broadband connection. If you are connected to the Internet through a DSL line, check your ISP if they use PPPoE. If they do, choose the PPPoE option, then type in: When all settings are finished, don’t forget to type Y to restart the system. 4. : PPTP client mode is used with some European DSL modems or used to provide L2-VPN tunneling connections. If PPTP client mode is selected, please enter: PPP over Ethernet PPTP Client When all settings are finished, don’t forget to type Y to restart the system. Your and . (T

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 A. Date/Time needs to be initialized every time the Wireless Router is reset.. B. Whenever the administrator logs on via web browser, the date/time is calibrated automatically according to the login PC. 4. Reset to factory default and restart. 5. Restart System Select WAN setup to select the correct configuration. Press 1 to select the WAN Connection type option menu. WAN Setup

  • Gigafast WF711-APR, GigaFast Ethernet Section 5 Click the [Save&Restart] button to save settings. Disable DHCP Server function of the Wireless Router. Fill in the LAN IP Address and click the [Save&Restart] button. 2. DHCP Server Disabled

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 From the above two sections (Virtual Server and DMZ), it can be concluded as follows : Although the Wireless Router provides the above two methods for compatibility improvements under the firewall protection, there is some inconvenience for the administrator to manage many PCs at home or in a SOHO environment. For example, in spite of the Virtual Server or DMZ functions, the administrator must know the specific LAN PC’s IP address in advance. Then, the administrator can fill it into the WEB page for Virtual Server or D

  • Gigafast WF711-APR, GigaFast Ethernet Congratulations on your purchase of this outstanding 11Mbps Wireless Access Router. This product is the perfect option to connect a group of wired or wireless PCs to a high-speed Broadband Internet connection or to an Ethernet based Backbone (ETTH/ETTB: Ethernet to the Home/Building). Configurable as a DHCP server, this product is the only externally recognized server device on your local area network (LAN). Thus even a non-technical person will easily configure it to meet the different applications. This product does not only provide a complete solution to share the Internet bandwidth, it also serves as an Interne

  • GigaFast Ethernet A : TCP/IP Well-Known Port Appendix B : Illustrated Typical Application C : Cabling and Pin Assignment D : Technical Support / Warranty info : Configure IP Manually : Technical Information E F

  • Gigafast WF711-APR, GigaFast Ethernet Section 5 1. DHCP Server Enabled Choose this option if you want the Wireless Router to assign IP’s to computers on the network automatically. Then fill in following: DNS Proxy: IP pool from 192.168.8.x to 192.168.8.x: LAN computers get their DNS server from the Wireless Router first. The Wireless Router will search the ISP’s DNS automatically. Whenever there is a request, the DHCP server will offer unused IP’s from the IP address pool to the requesting computer. The end address must be greater than the start address. Lease time: Assign fixed IP to MAC: the assigned IP wi

  • GigaFast Ethernet Technical Support GigaFast Technical Support Department Hours of Operation: Monday thru Friday 9AM - 8PM Saturday 10AM - 1PM Limited Warranty Excluding Holidays (888) GFE-6788 (888) 433-6788 Limited Warranty Statement: GigaFast Ethernet Solutions Inc. ("GFE") warrants its products to be free from defects in workmanship and materials, under normal u

  • Gigafast WF711-APR, GigaFast Ethernet Section 4 EZ Setup - WAN Click the EZ Setup-WAN link in the left frame. There are 5-connection types in this page. Only one connection type must be configured because the network is connected to the Internet via one method at a time. It can be changed later if your connection type changes. The five connection types are described in the following. Static connection is used when a fixed IP address is used. Certain ISPs will assign a static, or unchanging, IP address. Please check wi

  • Gigafast WF711-APR, GigaFast Ethernet Section 3 Device Administration The Wireless Router can be configured via Web browser, telnet, and console terminal. The administrator can choose either one of the three methods to perform device administration. No matter which method is used, this administration only allows one login session at a time. This is in consideration of system database consistency. If there is anyone else trying to login, it would not be possible. The Wireless Router will pop-up an alert message. The following description also assumes the Wireless Router is

  • Gigafast WF711-APR, GigaFast Ethernet Section 4 Clicking the [Clear] button will clear the WAN traffic counter. To update to the latest information, click the [Refresh] button. Click the Administration link on the left frame of this page to assign or change settings. Administration

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 DMZ DMZ (DeMilitarized Zone) is a zone, which is not protected by firewall. It means that all computers in the DMZ are dangerous and subject to be attacked/accessed by Internet intruders/hackers. However, the advantage is that all computers in the DMZ are completely exposed to Internet, thus all of them gain the full access privilege to the outside Internet. In such a case, most Internet applications should be compatible with them because there is no interference from the firewall. Currently there are more Internet applications that require 2-way acce

  • Gigafast WF711-APR, GigaFast Ethernet Section 6 This is very useful to avoid Internet intruder/hacker from probing the computer. Most likely, the hacker will not start to attack due to no PING response. 2. This function allows the administrator to configure the Wireless Router from the outside Internet with browser directly. In order to reserve HTTP service (port 80), which is used for virtual servers, the remote web administration function utilizes another port 64511 instead. (e.g. http://211.79.244.45:64511 ) 3. This function is used to inhibit some LAN clients (by

  • Gigafast WF711-APR, GigaFast Ethernet T C able of ontent Section 1 : Introduction : Features : Package Contents : System Requirements : Panel Description 2 : Installation : Hardware Connection to WAN : Hardware Connection to LAN : Network Setting in Administrator’s computer 3 : Device Administration : Web Based Configuration : Telnet/Console Configuration 4 : Firewall and Advanced Functions : Access Control : Service Time Allocation : URL Keyword Blocking : Virtual Server : DMZ : Multiple DMZ Host : Auto 2-Way Applications : Dynamic DNS 5 : Troubleshooting : Common Problems & Solutions : Frequently Asked Questions

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Continental Refrigerator 102004 Operator's installation and instruction manual continental-refrigerator/102004-5F8.pdf 29 Nov 2023 39 2.44 Mb
2 Kogan KAITVZZANDA Operation & user’s manual kogan/kaitvzzanda-FTX.pdf 13 Nov 2022 12
3 Cineversum Black Wing R599760 Operation & user’s manual cineversum/black-wing-r599760-R2V.pdf 09 Oct 2022 24 1.31 Mb
4 Deltec 1700 Operation & user’s manual deltec/1700-15M.pdf 09 Nov 2023 164
5 Cissell MANHD150 Owner's manual cissell/manhd150-C5B.pdf 20 Apr 2023 73 1.82 Mb
6 B&B Electronics 232CL9R Manual  b-b-electronics/232cl9r-Y4X.pdf 03 Dec 2022 5

Similar Resources:

  • NetModule

    NB2500

    (111 pages)
    Meriedweg 11 CH-3172 Niederwangen Switzerland [email protected] http://www.netmodule.com Tel +41 31 985 25 10 Fax +41 31 985 25 11  1998 - 2011 NetModule AG, Niederwangen, Switzerland All Rights Reserved. Copying this document or parts of it is prohibited. User Manual NetBox Wireless Routers NB1310 NB2210 NB2500 NB2600R NB2600 …
  • Samsung

    SCH-LC11

    (46 pages)
    100031015THIS FILE MAY CONTAIN IMAGES OR ILLUSTRATIONS THAT ARE COPYRIGHT PROTECTED. CLIENT MUST OBTAIN PROPER LICENSING AND USAGE RIGHTS PRIOR TO REPRODUCTION. SUPPLIER IS RESPONSIBLE FOR CHECKING WORKING DRAWINGS BEFORE PLATES ARE MADE FOR ACCURACY IN MEASUREMENTS, PLATE TOLERANCE REQUIREMENTS, REGISTRATION AND CONSTRUCTION DETAILING. ANY …
  • NETGEAR

    Orbi RBR20

    (2 pages)
    SupportThank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only ofcial NETGEAR support resources.Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien � …
  • Samsung

    CY-SWR1100

    (1 pages)
    The smarter router: it puts the priority on streaming content to your HDTV rst – and fast. Most routers give all linked devices equal priority. As a result, your HDTV seems to take forever to load programming from your PC and other digital sources. However, with the CY-SWR1100 Wireless Router, the best streaming content and fastest throughput speeds go …
  • SMC Networks

    2635W V2

    (50 pages)
    SMC2635WEZ-ConnectTMWireless Cardbus AdapterModel Number:SMC2635WQuick Installation GuideInstallationskurzanleitungGuide d’installation rapideGuía de inicio rápidoGuida rapida all’avvioSnabbinstallationBeknopte installatiehandleidingManual de instalação rápidaKort installationsvejledningEZ ConnectTMWireless Cardbus AdapterEZ ConnectTMWireless Cardbu …
  • Digital Loggers

    8-Channel USB Logger

    (12 pages)
     …

Comments, Questions and Opinions: