Smeg LSTA146S Instruction Manual

Text of Smeg LSTA146S User Guide:

• Smeg LSTA146S, EN 4 • Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer • Fabric softeners, or similar products, should be used as specified by the fabric softener instruc- tions. • The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be changed • Never stop a tumb

• Smeg LSTA146S, LAVASCIUGA WASHER-DRYER LAVE-LINGE SÉCHANT VOLLWASCHTROCKNER LAVADORA-SECADORA LIBRETTO ISTRUZIONI IT INSTRUCTION MANUAL EN MANUEL D'INSTRUCTIONS FR GEBRAUCHSANLEITUNG DE MANUAL DE INSTRUCCIONES ES

• Smeg LSTA146S, EN 9 4. USING THE APPLIANCE FOR WASHING 4.1 PREPARING THE ITEMS FOR WASHING 1. Subdivide the items for washing by fabric type and colour fastness. 2. Wash white and coloured items separately. New coloured items should be washed separately the first time. Normally, items carry labels with washing instructions. The following is a short description of the symbols u- sed on these labels. WASHING BLEACHING Machine wash at max. 90°C Machine wash at max. 60°C Bleaching allowed Do not bleach IRONING Machine wash at max. 40°C Machine wash at max. 30�

• Smeg LSTA146S, EN 8 • Do not connection/disconnect the power supply plug from the socket with wet hands • Only disconnect the power supply plug from the socket by taking hold of the plug itself, never by pulling on the lead. 3. DESCRIPTION OF CONTROLS 3.1 CONTROL PANEL All the appliance's control and monitoring devices are placed together on the front panel. Programme Se lector For switching the washer-dryer on and off and selecting pro- grammes. Can be turned in ei- ther direction. Does not turn whi- le

• Smeg LSTA146S, EN 13 4.11 SELECTING AND CONFIRMING OPTIONS 1. The Option Selection button can be used to select the following options in sequence (from the top down): Prewash: adds a stage before the main wash, lasting about 20 minutes at a temperature of 35°C. Suit- able for loads of particularly dirty items. Intensive: the max. temperature is changed to 60°C and the washing stage is extended to increase the effectiveness of the enzymes in the deterg

• Smeg LSTA146S, Ø2mmØ2mm 13mm13mm 16...21mm Ø 35mmØ35mm 13mm13mm 592...595mm 16...21mm 592...595mm ee ee ee ee Unterkante Lower edge C ôté inférieur Lato inferiore Lado inferior Onderkant Unterkante Loweredge C ôtéinférieur Latoinferiore Ladoinferior Onderkant 9 4 5 6 Нижнийкрай Нижнийкрай

• Smeg LSTA146S, EN 3 same as the values marked on the nameplate. The use of adapters or junctions is not recom- mended. Never disconnect the plug by pulling on the power supply lead. • The appliance is only disconnected from the electricity supply if the plug has been removed from the socket or the electrical system master switch has been turned off. The power plug must be accessible after the appliance has been installed. • The appliance must be installed using new sets of hoses (supplied with the appliance). Old hose sets should not be reused. • Take care that the appliance is not

• 1 EN Contents 1. Precautions for safety and use 2 2. Installation instructions 5 3. Description of controls 8 4. Using the appliance for washing 9 5. Using the appliance for drying 17 6. Cleaning and maintenance 20 7. Troubleshooting 22 This appliance is tagged in

• EN 12 4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME To switch on the appliance and select the programme, proceed as follows: 1. Turn the programmes knob in either direction. This switches on the washer-dryer. 2. Select the washing programme. The time left to the end of the programme and the maximum r

• Smeg LSTA146S, 4 ASSEMBLY INSTRUCTIONS FOR BUILT-IN WASHING MA- CHINES IMPORTANT - This machine complies with current safety regulations govern- ing electrical appliances and, to ensure user safety, it must be installed by a qualified technician as required by current legislation Size of cabinet The minimum dimensions of the cabinet are: height 820 mm, width 600 mm, depth 584 mm (fig. 1). Applying the panel The panel may be attached to the left- or right-hand side of the washing machine (fig. 2) The machine is supplied fitted for a left-hand side panel at- tachment as the right-hand side is fitted with the push-pull lock (upper part) and the

• Smeg LSTA146S, EN 21 3. Extract the drain hose ”A”. Warning: if the hose is hot, the water is hot or boiling hot. Place a shallow container on the floor and remove the plug “B” to drain off the water. Depending on the amount of water in the appliance, the container may have to be emptied several times. When no more water is coming out, close the hose again by pushing the plug “B” firmly back into place. 4. Unscrew the cover of the pump “D” by turning it to the left. Clean the p

• Smeg LSTA146S, EN 2 READ THE INSTRUCTIONS Attention! You are advised to read all the instructions in this manual carefully; it will inform you about the right conditions for the proper, safe use of your washer-dryer It is very important to keep this instruction manual with the appliance for future reference. In the event of sale or transfer, ensure that the manual always accompanies the appli- ance, to provide the necessary information about its use. 1. PRECAUTIONS FOR SAFETY AND USE Attention! These precautions are detailed for reasons of safety.

• Smeg LSTA146S, EN 7 2.3 CONNECTING TO THE WATER SUPPLY 1. Check that the water supply pressure is in the following range: 0,05-0,9MPa. With higher pressures, use a pressure reducer. 2. Connect the cold water supply hose (blue screw collar) to the cold water tap with ¾ gas threaded connector, taking care to tighten firmly to prevent leaks. The water sup- ply hose must not be kinked or crushed and must not be changed or cut. Threaded connections mus

• Smeg LSTA146S, EN 23 11 Appliance does not spin Anti-imbalance safety device tripped because laundry not evenly distrib- uted in drum. If laundry is still wet at end of cycle, rearrange it in the drum by hand and repeat spin programme only. 12 Emptying water from drum In the event of a power blackout or appliance failure, the water can be removed from the drum using the emergency procedure. 13 Laundry not properly spun Large items screwed up and not evenly distributed within drum. Always wash a mix of large and small items. 14 Traces of detergent on laundry Many

• Smeg LSTA146S, EN 14 4.12 TIME TO END 1. The Time to End key can be pressed repeatedly to select the time after which the washing programme will end. The time to end of cycle function calculates the initial duration of the washing/drying cycle, the settings made (temperature, spin speed and options) which may shorten or lengthen the cycle's initial du- ration, and the delay time the user wishes to add before the cycle starts. 2. After the time to end has been set, the symbol on the display remains on. 3. To annul the Time to End function, keep pressing the key repeatedly until the display sh

• PROGRAM GUIDE Programs Temp. (°C) Max. Spin (rpm) Max. washing load (kg) Max. drying load (kg) Prewash Wash Softner Prewash Intensive Easy Iron Extra rinse Flexi time Drying after wash if selected Wash program description Cotton and coloureds Delicate coloureds with light dirt / 30° Max 6 4         Normal Cold wash or at 30°C,

• Smeg LSTA146S, EN 18 5.2 WASH-AND-DRY PROGRAMME Automatic washing and drying can be carried out in the tough fabrics (cotton and colours) and synthetic/delicate fabrics programmes. If the wool wash programmes are selected, automatic drying after the wash cannot be set. For automatic washing and drying, the load of laundry must not exceed 4 kg of cotton or 2 kg of synthetic fab- rics. Therefore, if the load for washing and drying exceeds the quantities stated above, a wash+dry pr

• Smeg LSTA146S, 5 Place the template of the inner side of the panel and match the height of the baseboard with the lower edge of the panel (fig. 4) using the graduated scale. Make sure the template is horizon- tally centred with reference to the vertical lines marked at the ends. After placing the template in the correct position, trace the posi- tions of the following holes, pushing in with the tip of your pen- cil: • holes for the hinges and hinge screws (fig. 4) • holes for fixing the metal plate (if the magnetic lock is

• Smeg LSTA146S, EN 5 The manufacturer declines all responsibility for injury or damage caused by failure to comply with the above regulations or deriving from tampering with even just one part of the appliance and the use of non-original spare parts. 2. INSTALLATION INSTRUCTIONS Important! The appliance must be installed by a qualified engineer in compliance with the relevant regulations. The washer-dryer is heavy. Take care when lifting it. 2.1 UNPACKING The unit on flexible mounts is fixe

• Smeg LSTA146S, EN 16 4.17 OPENING THE APPLIANCE IN AN EMERGENCY In the event of a power failure, the door is opened using the mechanical release device activated by means of the lever in the bottom of the appliance: • Turn the knob to Off and disconnect the power supply plug from the socket. • Drain off the water (see point 6.4) • Pull the lever down and open the door. Warning, scolding hazard: before opening the door, check that the appliance does not contain boiling hot water and de- tergent which may

• EN 20 6. CLEANING AND MAINTENANCE Important – Before carrying out any cleaning or maintenance procedure, the plug must be disconnected from the power supply socket. 6.1 CLEANING THE OUTSIDE OF THE APPLIANCE • Regular, thorough cleaning will keep your appliance looking good. • Clean the exterior of the applian

• Smeg LSTA146S, EN 17 5. USING THE APPLIANCE FOR DRYING 5.1 GENERAL During drying cycles, the water tap must be turned on and the drain hose correctly positioned. This appliance can be set to perform wash only, dry only and wash-and-dry programmes. In the wash-and-dry programme, the appliance switches from washing to drying automatically, with no need to use the controls (at the end of the wash) to obtain the complete cycle. Attention • Only dry laundry or garments washed in an aqueous solution and suitable for tumble drying. • Do not dry fabric

• Smeg LSTA146S, ISTRUZIONI DI MONTAGGIO DELLE LAVATRICI INTEGRABILI IT ASSEMBLY INSTRUCTIONS FOR BUILT-IN WASHING MACHINES EN MONTAGEANLEITUNG FÜR EINBAUBARE- WASCHMASCHINEN DE INSTRUCTIONS DE MONTAGE DES LAVE-LINGE INTÉGRABLES FR INSTRUCCIONES DE INSTALACIÓN DE LAS LAVADORAS INTEGRABLES ES INSTRUÇÕES DE MONTAGEM DAS MÁQUINAS DE LAVAR ROUPA INTEGRÁVEIS PT MONTAGEINSTRUCTIES VAN INTEGREERBARE WASMACHINES NL MONTERINGSANVISNING FOR INTEGRERBARE VASKEMASKINER DK MONTERINGSANVISNINGAR FÖR INBYGGNADSBARA TV�

Related Products and Documents (Washer):

Comparable Devices:

Similar Resources:

• Bradley S19-282 (16 pages) P.O. Box 309, Menomonee Falls, WI USA 53052-0309PHONE 1-800-BRADLEY FAX (262) 251-5817http://www.bradleycorp.comInstallation215-1548 Rev. G; ECN 07-523A© 2008 Bradley CorporationPage 1 of 16 1/15/08S19-282 (with Tailpiece)(avec pièce de raccordement)(con tubo de aspiración)S19-282PT (with P-trap)(avec siphon en P)(con sifón en P)Barrier Free Cabinet-Con …

• Maytag Neptune TL FAV6800A (16 pages) LEAVE THESE INSTRUCTIONS WITH THE OWNERLAISSER CES EXPLICATIONS DE MISE EN SERVICE AU PROPRIÉTAIRECERCIÓRESE DE DEJAR ESTAS INSTRUCCIONES CON EL PROPIETARIO.Printed in U.S.A. 6 2908990AUTOMATIC WASHER INSTALLATION INSTRUCTIONSMISE EN SERVICEMACHINE À LAVERLAVADORA AUTOMÁTICAINSTRUCCIONES DE INSTALACION …

• Alliance Laundry Systems CHF455 (60 pages) Programmingwww.comlaundry.comWasher-ExtractorCygnus ProfessionalRefer to Page 3 for Model Numbers CFD198RCFD198RPart No. D1353ENR1September 2012Keep These Instructions for Future Reference.(If this machine changes ownership, this manual must accompany machine.) …

• Whirlpool FL 5064 (8 pages) SERVICEWhirlpool EuropeCustomer Services Model FL 5064 Version 8570 506 10000 PageTechnical data 2Spare part list 3Exploded view 4 - 5Wiring diagram 6Circuit diagram 7Program diagram 8Service ManualWashing machineFrontloaderFL 5064FL 5064This documentation is only intended for qualified technicians who are aware of the respec-tive safety regulations.Date: …

• Ariston MARGHERITA (32 pages) ARGHERITAMARGHERITAMWasher-dryerInstructions for installation and useWasher-dryerInstructions for installation and useÑòèðàëüíàÿ ìàøèíà ñ ñóøêîéÈíñòðóêöèè ïî óñòàíîâêå è èñïîëúçîâàíèþÑòèðàëüíàÿ ìàøèíà ñ ñóøêîéÈíñòðóêöèè ïî óñòàíîâêå è èñïîëúçîâàí …

• Indesit IWD 6125 (16 pages) GB1ContentsInstallation, 2-3-4-5Unpacking and levellingConnecting the electricity and water suppliesThe first wash cycleTechnical dataDescription of the washing machine and starting a wash cycle, 6-7Control panelIndicator lightsStarting a wash cycleWash cycles, 8Table of wash cyclesPersonalisation, 9Setting the temperatureSetting the spin speedFunctionsDeter …

Comments, Questions and Opinions: