Go-Video T2040 Operation & User’s Manual

Text of Go-Video T2040 User Guide:

• Go-Video T2040, 14 3 - Advanced Settings (cont.) TV Settings The TV settings menu allows you to adjust channels, picture settings, timers, V-Chip ratings, closed captions, and more. 1 Press INPUT until the current channel number appears in the upper right-hand corner (TV mode). 2 Press MENU/ENTER to display the main menu. 3 Press / to select TV and press MENU/ ENTER. 4 Press / to select from the following options: Set-Up Press MENU/ENTER to display the Setup Menu, then press / to select from the following options: • Antenna Source - Press / to select Antenna or Cable. • Auto Search - Press  to begin searching for all available chan

• Go-Video T2040, 5 2. Remote Control 4. Power Cable 5. VGA Cabl e 6. TV Tuner 7. AV Cable 1. LCD TV 8. RF Cable 9. User’s Guide & Registration Card 3. AAA Batteries (2 ) DISPLAY 1 4 7 10+ 2 5 8 0 3 6 9 JUMP CH+ VOL- VOL + CH- RETURN MENU ENTER MUTE FAVORITES INPUT POWER CHANNEL SEARCH ASPECT CAPTIONS AUDI O PICTUR E MODE 1 - Welcome Unpacking your LCD TV

• Go-Video T2040, 8 TV Control Overview You can also use the buttons on top of the unit for basic TV functions, including: • INPUT • EXIT • CHANNEL / • VOL / • MENU/ENTER • POWER These buttons have the same functions as the corresponding buttons on the remote control (see page 7). NOTE: If you have a PC connected to the LCD TV, press the AUTO button to automatically adjust the PC display to fit the LCD screen. 1 - Welcome (cont.) AUTO INPUT EXIT UP DOWN CHANNEL VOLUME + - ENTER MENU

• Go-Video T2040, 12 20 0 5 0 20 0 5 0 2 - Getting Started (cont.) Step 9 - Connect Optional Wall Mount 1 Remove the supplied stand as shown. 2 Attach the LCD TV to a standard VESA Arm wall mount (100 x 100 mm). Step 8 - Adjust Screen Angle To set the LCD TV to a comfortable viewing angle, tilt the screen up to 5 degrees forward or 20 degrees backward.

• Go-Video T2040, 18 4 - Help Symptom Solution No picture or sound. • Ensure power cable is properly inserted in power outlet. • Ensure power is on. • Ensure correct input is selected. No sound. • Ensure volume is turned up. • Ensure sound is muted. • Ensure headphones are not connected. • Ensure input source is connected. Noisy picture and sound. • Ensure antenna cable is properly connected. • Ensure input source is properly connected. Picture is not clear. • Ensure antenna is properly oriented. • TV sign

• Go-Video T2040, 2 FCC & Safety Information ...................................................................3 Important Safety Instructions .............................................................4 1 - Welcome .......................................................................................... 5 Unpacking your LCD TV .................................................................................................5 Rear Panel Overview ..................................................................................

• 16 3 - Advanced Settings (cont.) OSD Settings The OSD (On-Screen Display) menu allows you to set the language, position, size, and style of the on-screen menu system. 1 Press INPUT to select any active input. • The menu system will only display if there is a signal detected for the selected input. 2 Press MENU/ENTER to display the main menu. 3 Press / to sel

• Go-Video T2040, 13 3 - Advanced Settings Menu System Overview Press the MENU/ENTER button to view the five main menu categories: • PC • TV • Video • OSD • Audio Depending on the input you are viewing, one or more of these options will be dimmed. PC Settings If you are using the LCD TV as a PC monitor, you can use the PC menu to adjust the brightness, contrast, color, size, and position of the PC display. 1 Press INPUT until PC appears in the upper right-hand corner. • If you do not have a PC connect

• Go-Video T2040, 15 3 - Advanced Settings (cont.) Video Settings If you have connected an audio/video device, such as a DVD player or VCR, to the AV inputs, you can use the Video menu to adjust picture settings, V-Chip ratings, closed captions, and more. 1 Press INPUT until AV appears in the upper right-hand corner. • If you do not have an AV device connected to the AV Inputs you cannot view the Video settings menu. 2 Press MENU/ENTER to display the main menu. 3 Press / to select Video and press MENU/ENTER. 4 Press /�

• Go-Video T2040, 6 1 2 3 4 5 6 7 8 9 10 Push arrow mark to open cover. Rear Panel Overview 1 AC In Connects to the supplied power cable. 2 Video In Connects to the Video Out of a DVD player, VCR, or other AV equipment. 3 S-Video In Connects to the S-Video Out of a DVD player, VCR, or other AV equipment. 4 Audio In Connects to the Audio Out of your AV equipment when using the Video or S-Video connections. 5 Component Video (Y/Cb/Cr) In Connects to the Component Video Out of a DVD player or other AV equipment. 6 Audio In Connects to the Audio Out of your AV equipment when using the Component

• Go-Video T2040, 9 2 - Getting Started Step 1 - Insert Remote Control Batteries Install the supplied batteries as shown below, paying attention to the correct polarities. - + + - In Out Caution • Do not expose the remote control to severe shock or vibration. • Do not expose the remote control to liquids, or in an area with high humidity. • Do not place the remote control in direct sunlight. The heat may damage the unit. • The remote control may not work properly if the IR sensor is exposed to direct sunlight or other strong lighting. If this is the case, change the angle of the lighting or LCD TV, or operate the remote control closer to the IR sensor. • If

• Go-Video T2040, 20 4 - Help (cont.) Power Saving Mode (PC only) The LCD TV is equipped with a power management function which automatically reduces power consumption in three power saving modes when not in use. STATE LED POWER Horizontal SYNC. Vertical SYNC. ON Green < 70W ON ON STANDBY Amber < 4W OFF ON OFF Amber < 4W OFF OFF Compatible PC Video Mode Mode Resolution H. Freq. (KHz) Band Width (MHz) 1 VGA 720 x 400 31.47 KHz 70 Hz 2 VGA 640 x 480 31.47 KHz 60 Hz 3 MAC 640 x 480 35.00 KHz 67 Hz 4 VESA 640 x 480 37.86 KHz 72 Hz 5 VESA 640 x 480 37.5 0 KHz 75 Hz 6 VESA 800 x 600 35.10 KHz 56 Hz 7 VESA 800 x 600 37.88 KHz

• 17 3 - Advanced Settings (cont.) Audio Settings The Audio menu allows you to set the LCD TV volume level, balance, bass, treble, and loudness. 1 Press INPUT to select any active input. • The menu system will only display if there is a signal detected for the selected input. 2 Press MENU/ENTER to display the main menu. 3 Press / to select Audio and pres

• Go-Video T2040, 7 1 - Welcome (cont.) Remote Control Overview 1 POWER Turns TV on and off. 2 0-9/10+ Selects channels directly. 3 DISPLAY Displays TV status. 4 CH+/- Selects next or previous channel. 5 VOL+/- Adjusts volume. 6 RETURN Returns to previous menu or exits menu system. 7 ASPECT Sets TV aspect ratio to 4:3 (standard) or 16:9 (widescreen). 8 CHANNEL SEARCH Searches for all available channels in the selected tuner band. 9 CAPTIONS Selects the desired Closed Caption mode. 10 INPUT Changes on-screen view to PC, TV, AV (Video In), SV (S-Vide

• Go-Video T2040, 3 NOTE DU DOC This product conforms to Canadian Class B emissions regulations. Ce produit est conforme aux réglements canadiens relatifs aux émissions pour les appareils de class B. WARNING FCC regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digit

• 4 • When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart. • Ventilation - The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilatio

• Go-Video T2040, 10 Step 3 - Connect to Antenna/Cable Connect the TV to your antenna or cable/satellite hookup (or PC) as shown. Connect to Cable Box or Satellite Receiver Connect to Antenna or Basic Cable Connect to PC RF Cable VGA Cable IN OUT AUDIO S-VIDEOVIDEO L R OUTPUT RF 2 - Getting Started (cont.) Step 2 - Connect Power Cable 1 Connect the supplied power cable to the AC In jack on the back of the LCD TV. 2 Plug the power cable into a standard AC outlet. Caution • Always turn the the LCD TV off when connecting the power cable. • Always unplug the power cable from the LCD TV and power outlet when not using the TV for a long period of t

• Go-Video T2040, 21 4 - Help (cont.) Limited Warranty Who Provides the Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. Remote controls are warrantied for 90 days from the date of purchase. Who is Protected This warranty protects the original consumer owner of this GoVideo product. What is Covered and How Long This warranty covers internal operating parts and service/labor to repair or replace covered parts in this GoVideo product for 90 days labor, 1 year parts, from the date of purchase, defin

Related Products and Documents (TV):

Comparable Devices:

Similar Resources:

• LG 55LV555H (41 pages) LCD TVSERVICE MANUALCAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.CHASSIS : LA05EMODEL : 55LV555H55LV555H-UANorth/Latin America http://aic.lgservice.comEurope/Africa http://eic.lgservice.comAsia/Oceania http://biz.lgservice.comInternal Use OnlyPrinted in KoreaP/NO : MFL67121704 (1111-REV00) …

• Panasonic PV24DF62 - DVD COMBO (56 pages) Please read these instructions carefully before attempting to connect,operate, or adjust this product. Please save this manual.Spanish Quick Use Guide is included.(Guía para rápida consulta en español está incluida.)LSQT0501AFor assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] / DVD CombinationOperating …

• LG 42LV5400 (2 pages) LED LCD TV42LV5400 42" Class 1080p LED LCD TV (42.0" measured diagonally) LG’s LED technology provides a slim profile and delivers amazing brightness, clarity and color detail, as well as greater energy efficiency compared to conventional LCD TVs.TruMotion 120Hz technology lets you see sports, video games and high-speed action with virtually no …

• Insignia NS-32D311MX15 (2 pages) QUICK SETUPGUIDE32" LED TVNS-32D311MX15Included accessoriesWhich cables do you have?Your TV has several dierent jacks for connecting devices. For the best video quality, use the best available connection. Note: You can also connect a DVI device to your TV. See your online User Guide for connection instructions.Note: Images may not necessarily repres …

• Skyworth 8M39A/E (39 pages) SERVICE MANUAL8M39A/E CHASSISDescription:MODEL.Engineering Dept:Artwork By:Checked By:Approved By:Brand Name:JOB NO.Date:Date:Date:SERVICE MANUAL 8M39A/E2010-8-17SKYWORTHSIZE:A5Design and specifications are subject to change without prior notice.(Only Referrence) …

• Insignia IS-TV040925 (32 pages) OWNER'S MANUALMANUAL DEL USUARIOMANUEL D'INSTRUCTIONS32” MTS STEREO COLOR TELEVISIONTELEVISOR A COLOR DE 32” CON SONIDO ESTÉREO MTSTÉLÉVISEUR COULEUR 32 po STÉRÉO AVEC DÉCODEUR MULTIVOIEIS-TV040925TV/CATV MODE SELECTIONSELECCIÓN DEL MODO DE TV/CATVSÉLECTION DU MODE TV/CATVWhen shipped from the factory, the TV/CATV menu option is set to …

Comments, Questions and Opinions: