Manualios.com

Panasonic TH-42PH11UK - 42" Plasma Panel Operating Instructions Manual

  • TH-42PH11UK - 42" Plasma Panel Monitor
  • maK68Lu1FD6Ew
  • Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 58

Panasonic TH-42PH11UK - 42" Plasma Panel Manual Online:

3.5, 1876 votes
Panasonic TH-42PH11UK - 42" Plasma Panel User Manual
Panasonic TH-42PH11UK - 42" Plasma Panel User Guide
Panasonic TH-42PH11UK - 42" Plasma Panel Online Manual

Text of Panasonic TH-42PH11UK - 42" Plasma Panel User Guide:

  • Panasonic TH-42PH11UK - 42" Plasma Panel, + - + - 8 Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity ( + and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an environment-friendly manner. Observe the following precautions: 1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set. 2. Do not combine a used battery with a new one. 3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”). 4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries. 5.

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 7 Safety Precautions / Maintenance WARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry. • Do not scratch or hit the surface of the panel with fi ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substa

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 30 Reduces power consumption Press to select “POWER SAVE” “STANDBY SAVE” “POWER MANAGEMENT” “AUTO POWER OFF”. Press to select “ON” or “OFF”. On Off Press to exit from SET UP. • POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced. • STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 2/2 SET UP MULTI DISPLAY SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATION LANDSCAPE 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 31 Press to select INPUT LABEL. Press to change the INPUT LABEL. This function can change the label of the Input signal to be displayed. Select the input signal which you would like to change its label before customizing the Input labels. (see page 15, 17) Note: While selecting a Input signal through Optional Terminal Board connected to Slot 1, Slot 2 and

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 2/2 ADVANCED SETTINGS COLOR TEMP COLOR MANAGEMENT NORMAL OFF ON PICTURE 0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V-POS 0 H-POS V-SIZE DOT CLOCK H-SIZE CLOCK PHASE 0 0 0 0 1/2 SIGNAL SET UP PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SCREENSAVER POWER SAVE 2/2 SET UP MULTI DISPLAY SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATION LANDSCAPE 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) [ VIDEO ] NOISE REDUCTION REFRESH RATE AUTO OFF

  • Panasonic TH-42PH11UK - 42" Plasma Panel, Options Weekly Command Timer 1/3 Initial INPUT Onscreen display On O f f Off Off 0 0 Maximum VOL level Initial VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 2/3 3/3 Options O f f Off Off Clock Display Rotate Off All Aspect Slot1 Serial Slot Select Slot power Off Power On Screen Delay 39 1 2 3 5 Press to displa

  • Panasonic TH-42PH11UK - 42" Plasma Panel, AUDIO PC IN 10 PC Input Terminals connection Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) • The display resolution is a maximum of 768 × 768 dots (TH-42PH11UK), 1,024 × 768 dots (TH-50PH11UK) when the aspect mode is set to “4:3”, and 1,024 × 768 dots (TH-42PH11UK), 1,366 × 768 dots (TH-50PH11UK) when the aspect mode is set to “FULL”. If the displa

  • 1/2 SIGNAL SCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] NOISE REDUCTION OFF REFRESH RATE 100 Hz 3 : 2 PULLDOWN SIGNAL OFF [ Digital ] NOISE REDUCTION

  • Panasonic TH-42PH11UK - 42" Plasma Panel, INPUT MENU ENTER/ + /VOL - / 13 Power Indicator Remote Control Sensor Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9) Connecting the plug to the Wall Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet fi rst. Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Press the button on the

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. • Top of the Plasma Display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Pl

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 44 Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound Volume (Check whether the mute function has been activated on the remote control.) No Picture No Sound Not plugged into AC outlet Not switched on PICTURE and BRIGHTNESS/Volume setting (Check by pressing the power switch or stand-by button on the remote control.) No Picture Normal Sound If a signal with a non-applicable color system format, or frequency is inp

  • You can set the remote control ID when you want to use this remote control on one of several different displays. Note: To operate this function, please purchase ID remote controller sold separately. Object model : EUR7636070R 33 SET UP for MULTI DISPLAY 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of - , for

  • 5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accorda

  • Panasonic TH-42PH11UK - 42" Plasma Panel, SCREENSAVER START FUNCTION MODE SIDE BAR ADJUST WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY OFF 6:15 12:30 BRIGHT OFF OFF PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY OFF 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT PRESENT TIME OF DAY 99:99 29 These functions prevent the occurrence of an “image retention” on the display when turned ON. WOBBLING: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image. ON1: Shifts the image every 30 se

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V-POS 0 H-POS V-SIZE DOT CLOCK H-SIZE CLOCK PHASE 0 0 0 0 0 0 0 NORMAL NORMALIZE POS. /SIZE V-POS H-POS 0 V-SIZE H-SIZE AUTO SETUP 23 Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select the menu to adjust. Press to adjust the menu. Press to exit from adjust mode. During “VIDEO (S VIDEO)”, “Digital”, “SDI” and “HDMI” input signal. During “COMPONENT”, “RGB” and “PC” input signal. Notes: • Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the

  • INPUT MENU ENTER/+/VOL - / 18 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: For details about the aspect mode, please see “List of Aspect Modes” (page 45). Panasonic AUTO The display will automatically become enlarged (dep

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 0 0 0 1/2 SOUND NORMAL NORMALIZE STANDARD OFF TREBLE AUDIO MENU BALANCE BASS 0 MID SURROUND MAIN AUDIO OUT (PIP) 26 SOUND Adjustment Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU. 1 Press to display the SOUND menu. Press to select the menu to adjust. Select the desired level by listening to the sound. Press to exit from adjust mode. 2 Select to adjust each item. While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMAL

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 2 WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the ap pli ance. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPE

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 41 Item Adjustments Studio W/B Off: Nullify all the settings adjusted. On: Sets the color temperature for TV studio. Note: Valid only when the low is set as color temperature on screen adjustment. Studio Gain Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables “Studio Gain”. On: Enables “Studio Gain”. Note: This setting is valid only when the input signals are as follows: Component Video, RGB (analog), SDI, HDMI Slot Power Off Auto On Off: Power is not transmitted to the slot power. Auto: Power is transmitted to the slot power only when main power is on. On: Power is transmitted to the s

  • Panasonic TH-42PH11UK - 42" Plasma Panel, 1/2 SIGNAL SCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP SCREENSAVER START FUNCTION WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT PRESENT TIME OF DAY 99:99 MODE OFF SCREENSAVER START FUNCTION MODE FINISH TIME START TIME SCROLLING BAR ONLY TIME OF DAY 6:15 12:30 PRESENT TIME OF DAY 15:00 SCREENSAVER START FUNCTION MODE SAVER DURATION SHOW DURATION SCROLLING BAR ONLY INTERVAL 12:00 3:00 PRESENT TIME OF DAY 15:00 28 Do not display a still picture, especially in 4:3 mode,

  • Panasonic TH-42PH11UK - 42" Plasma Panel, A B A B A B B A B A B A PC1 VIDEO2 PC1 VIDEO2 VIDEO2 VIDEO1 PC1 VIDEO2 A A A C B B B D 19 Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows below. Press to swap main picture and sub picture. Press to select the input mode. Under main Picture and sub picture display, select the picture which you would like to change input modes. Notes: • The sub picture sound is heard while a sub picture operation is underway. • The sub picture operation automatically returns to the main picture operation if a sub picture operation has not been performed for about 5 seconds ∗ or if any of the remote contro

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony VGNFW590GAB Specifications sony/vgnfw590gab-52Q.pdf 13 Dec 2023 2
2 D-Link DGE-530T Manual  d-link/dge-530t-7Q4.pdf 08 Jan 2023 70
3 Daewoo AXG-327 Service manual daewoo/axg-327-6R5.pdf 21 Oct 2023 88
4 Fostex 6301ND Owner's manual fostex/6301nd-DWQ.pdf 08 Aug 2022 12 3.36 Mb
5 Cyber Acoustics ACM 9801 Datasheet cyber-acoustics/acm-9801-AWE.pdf 26 Feb 2024 1 0.48 Mb
6 Black Box SERVSWITCH KV3108SA-R4 Quick install manual black-box/servswitch-kv3108sa-r4-927.pdf 16 Dec 2023 111 1 Mb

Similar Resources:

  • HANNspree

    HZ194APB

    (1 pages)
    18.5” VIEWABLESCREEN1366x768RESOLUTIONCONTRASTCONTRAST RATIO10,000:116:9ASPECT RATIOBUILT-IN STEREOSPEAKERSULTRA-WIDEVIEWING ANGLETILTVESAWALL-MOUNTABLEVGA INPUT www.hannsg.com/us19” Widescreen LCD Display Beverly Hills Store 420 N. Beverly Drive, Beverly Hills, CA 90210 310.288.0208San Francisco Store 400 Sutter Street, San Francisco, C …
  • schmersal

    ASM E1-R2

    (6 pages)
    ASM E1-R2ASM E2-R2/R2Operating instructions (short version)AS-i safety monitorEN11. About this document1.1 FunctionThis operating instructions manual provides all the information you need for the mounting, set-up and commissioning to ensure the safe operation and disassembly of the safety monitor. The operating instructions must be available in a legible c …
  • Eizo

    ColorEdge CG222W

    (38 pages)
    ImportantPlease read PRECAUTIONS, this User’s Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference.About TCO'03 ............................................................ 35FCC Declaration of Conformity .................................. 36Hinweise …
  • Dell

    1401FP

    (4 pages)
    Dell 1401FP Flat Panel Color Monitor Quick Setup Guide 1Dell™ 1401FP Flat Panel Color Monitor Quick Setup Guide Safety Instructions Observe the following safety guidelines when connecting and using your monitor: • Be sure that your monitor is electrically rated to operate with the AC power available in your location. • Locate your monitor near an e …
  • Dell

    E1709WFP

    (2 pages)
    Setting Up Your MonitorConnect the power cableConnect the monitor using the blue VGA cable132Dell™ E1 09W Flat Panel Monitor Press the power buttonVGASlide the monitor stand onto base until it clic s into place将显示器支架推入底座,直到其卡扣到位 使用蓝色 VGA 线连接显示器 连接电源线 按下电源按钮 将显示器底� …
  • Hitachi

    CM761ET

    (20 pages)
    .:HITACHI,,.,’...),COLOUR MONITORUSER MANUALCM761 ETMANUEL D’UTILISATIONBEDIENUNGSANLEITUNG(DJ71)MANUAL DE USUARIOMANUALE DI ISTRUZIONIwith EasyMenu !EasyMenu is HITACHI’S On Screen Display function for easy operation.READ THE INSTRUCTIONS INSIDE CAREFULLY.KEEP THIS USER MANUAL FOR FUTURE REFERENCE.For future reference, record the serial number of your …

Comments, Questions and Opinions: