Panasonic WV-CM1480 Operating Instructions Manual
|
Panasonic WV-CM1480, Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Model No. WV-CM2080 WV-CM1780 WV-CM1480 Color Monitor Operating Instructions POWER Video Monitor WV-CM 2080 O N O F F AUDIO MENU STANDBY INPUT SELECT ENGLISHFRANÇAIS
Panasonic WV-CM1480, 2 The serial number of this product may be found on the rear of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead sym- bol, within an equilateral triangle, is intended to alert the user to the pres- ence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons
Panasonic WV-CM1480, 3 The Panasonic WV-CM2080, WV-CM1780 and WV-CM1480 Color Monitor’s high resolution S-video input assures high definition picture quality. All monitor functions, except for power and input selection, can be controlled from an onscreen menu. Provided with power saving feature as well as standard BNC and S-video input connectors for connection to CCTV equipment. PREFACE • Refer all work related to the installation of this prod- uct to qualified service personnel or system installers. • Do not block the ventilation opening or slots on the cover. To prevent the appliance from overheating, place it at least 5 cm (2 inches)
Panasonic WV-CM1480, 4 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ON OFF POWER STANDBY INPUT SELECT MENU – + AUDIO Video Monitor WV-CM 2080 q w e t y u r * The above figures represent model WV-CM2080. q Power Button (POWER ON/OFF) This button turns the power of the monitor on and off. w Power Indicator Is on when the power of the monitor is turned on, also in standby mode. On: Green light Standby: Orange light e Standby Button (STANDBY) Pressing this button toggles the display mode on the monitor screen as shown below. On: Normal display Standby (Mode 1): Low display brightness Standby (Mode 2): No display (blackout) r Input Selection Button (INPUT SELECT) Selects input in th
Panasonic WV-CM1480, 5 !5 Standby Control Terminal (STANDBY ON/STANDBY OFF/G) This terminal accepts input from an outboard device to control the standby mode. It operates as follows: STANDBY ON: Establishes the specified standby mode. STANDBY OFF: Releases standby mode (normal dis- play). !6 Audio Input Connectors (AUDIO IN A/B) For audio input from an outboard device !7 Audio Output Connectors (AUDIO OUT A/B) The audio input signal connected to the Audio Input Connector is looped through to this connector. !8 S-Video Input Connector (S-VIDEO IN) For input of S-video signal from a
Panasonic WV-CM1480, 6 INSTALLATION The installation described below should be made by qualified service personnel or system installers. ■ Mounting into the Rack for WV-CM2080 The monitor can be mounted into the rack as described below. P O W E R Video Monitor W V -C M 20802080 ON OFF A U D IO M E N U S T A N D B Y IN P U T S E L E C T 2. Install the monitor with the rack mounting bracket in the rack securing it with four screws (not included). 1. Place the rack mounting brackets supplied onto the rear of the monitor and tighten with the eight supplied screws (M4 x 10). ■ Mounting into the Rack for WV-CM1780 or WV
Panasonic WV-CM1480, 7 ■ Connection with the Camera Site Connect the Video Output of the camera site equipment to the VIDEO IN connectors on the rear of the monitor using coaxial cables. The maximum coaxial cable lengths between the cameras are shown below. ■ Connection with the VCR • Recording on the VCR Connect the VIDEO OUT A or B connector on the moni- tor to the video input of the VCR with a coaxial cable. Connect the AUDIO OUT A or B connector on the mon- itor to the audio input of the VCR with an audio cable, if applicable. Cable The connections described below should be made by q
Panasonic WV-CM1480, 8 ■ Connection between two or more color monitors and a device compat- ible with Panasonic Security Data mode In case of connecting multiple devices compatible with the Panasonic Security Data mode, connect the unit in a daisy-chain configuration as shown below. The allowable connecting devices are up to 16 in a system. The maximum allowable cable length of the system is approximately 500 m (1 650 ft). ■ Connection to the Standby On/Off Terminal Connecting an external device to the STANDBY ON/OFF Terminal on the rear of the monitor enables control of the monitor
Panasonic WV-CM1480, 9 SETUP PROCEDURES This monitor offers various onscreen menus for setting user preferences. In the COMMUNICATION SETUP Menu, you can set the parameters for communication between the System Controllers and the Monitors. ■ Displaying the Setup Menu To display the Setup Menu, follow the procedure shown below. 1. Confirm that the cameras and peripherals are connect- ed correctly and securely. 2. Turn the power of the monitor on by pressing the POWER button. 3. Press the MENU button for 5 seconds or
Panasonic WV-CM1480, 10 ● Baud Rate (BAUD RATE) This item lets you set the transmission speed for RS-485 communication. 1. Move the cursor to the BAUD RATE parameter with the C or D button. 2. Select the desired transmission speed shown below with the - or + button. The factory default setting is 9 600 bps. ● Data Bit (DATA BIT) This item lets you set the number of data bits for RS-485 communication. The factory default setting is 8 bit and fixed. ● Parity Check (PARITY CHECK) This item lets you set the parity bit for RS-485 communica- tion. 1. Move the cursor to the PARITY CHECK parameter with the C or D button. 2. Select NONE, EVEN or
Panasonic WV-CM1480, 11 ■ Power Up Before operating the monitor, confirm that the cameras and peripherals are connected correctly and securely. 1. Turn on the monitor by pressing the POWER button. The Power Indicator lights in green. 2. Select the desired input to be displayed by pressing the INPUT SELECT button. Pressing this button will select the display (or audio) input in the sequence shown below. The selected input picture appears on the monitor screen. OPERATING PROCEDURES VIDEO IN A VIDEO IN B S-VIDEO IN Onscreen Display Video Input Audio Input A CH VIDEO IN A AUDIO IN A B CH VIDEO IN B AUDIO IN B S-VI
Panasonic WV-CM1480, 12 9. Move the cursor to the AUDIO parameter with the C or D button, then adjust the audio volume with the - or + button. -: Decreases the audio volume. +: Increases the audio volume. 10. Move the cursor to the STANDBY ON parameter with the C or D button, then select the desired mode with the - or + button. These modes refer to the display mode in standby con- dition when the STANDBY ON terminal is receiving input from the outboard device. MODE 1: Pictures are displayed with less brightness. MODE 2: Monitor blackout, i.e., no picture is displayed. IGNORE: Input signal is ignored. The display does
13 ■ Audio Volume Control The audio volume can be adjusted with the - or + button in normal view. While the volume is being adjusted, the indicator displays the changed level as shown below. -: Decreases the audio volume. +: Increases audio volume. ■ Standby Function 1. Power up the monitor and select the input to be displayed. Refer to Power Up above. 2. Pressing the STANDBY bu
Panasonic WV-CM1480, 14 OPERATING PROCEDURES (with the System Controller) For the following procedure, the WV-CM2080, WV-CM1780 or WV-CM1480 needs to be set up first from the Setup menu. The WV-CM2080, WV-CM1780 or WV-CM1480 can be controlled with the specified System Controller. Given below is an example. For further details refer to the Operating Instructions supplied with the System Controller. 1. Select a Unit Address number by pressing the Numeric buttons, then press the UNIT button. 2. To select the input to be displayed, select a specified CAM NO. (input number
15 APPENDIX This appendix details the elements for communication between the Monitor and the System Controller. For the communication parameter settings, refer to the SETUP PROCEDURES on page 9. ■ Communication Protocol ● Data Format The controller sends messages to operate the monitor in the format shown below. A transmission message consists of [STX], [Unit Address],
16 ■ Function Number Table The list below shows the function numbers assigned to the monitor when controlling it with the specified System Controller. Function Number Function 001 NORMAL SETTINGS: Reset the items on the page in the Display Setting menu to the factory default settings. 002 Brightness Control: Reset to value 0 003 Brightness Control: Value Increment (+1) 004 Brightne
Panasonic WV-CM1480, 17 Power Source: 120 V AC, 60 Hz Power Consumption: WV-CM2080: 90 W WV-CM1780: 73 W WV-CM1480: 70 W Screen Size: WV-CM2080: 548 mm (21-9/16”) diagonal tube size 508 mm (20”) viewable size WV-CM1780: 444 mm (17-1/2”) diagonal tube size 406 mm (16”) viewable size WV-CM1480: 394 mm (15-1/2”) diagonal tube size 356 mm (14”) viewable size Horizontal Resolution: WV-CM2080: More than 500 TV lines at center WV-CM1780: More than 800 TV lines at center WV-CM1480: More than 750 TV lines at center S-video Input: Y: 1.0 V[p-p]/75 Ω, C: 0.286 V[p-p]/75 Ω, Mini DIN jack Video Input: 1.0 V[p-p] composite/75 Ω, BNC (x2) Video Output: Looped through input with Auto Ter
Panasonic WV-CM1480, 18 Power Cord ................................................................. 1 pc. Rack Mounting Bracket............................................... 2 pcs. (WV-CM2080) Fixing Screws for Rack Mounting Bracket ................. 8 pcs. (WV-CM2080) ACCESSORIES
Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc. Ave. 65 de Infanteria. Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 (809)750-4300 Panasonic Security and Digital Imaging Company A Division of Matsushita Electric Corporation of America Execut
DOWNLOAD |
Panasonic PT-56LCX70 - 56" Rear Projection TV Monitor Operating instruction
PT-56LCX70 - 56" Rear Projection TV |
Panasonic CT-30WX54 Monitor Manual
CT-30WX54 |
Panasonic TH-42LFP30W Monitor Operating instructions manual
TH-42LFP30W |
Panasonic AG-LC35 Monitor Operating instructions manual
AG-LC35 |
Panasonic PANASYNC S110 Monitor Operation & user’s manual
PANASYNC S110 |
Panasonic CT-36SF36 Monitor Operating manual
CT-36SF36 |
Panasonic PANAFLAT LC-50P Monitor Operation & user’s manual
PANAFLAT LC-50P |
Panasonic BTH1390Y - COLOR VIDEO MONITOR Monitor Operating instructions manual
BTH1390Y - COLOR VIDEO MONITOR |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | ARTronic | ART 600VA | Operation & user’s manual | artronic/art-600va-J34.pdf | 04 Feb 2023 | 12 | |
2 | Frigidaire | 318205412 | Installation instructions manual | frigidaire/318205412-E14.pdf | 21 Aug 2022 | 24 | 2.06 Mb |
3 | Christopher Ward | C8 P2725 | Owner's handbook manual | christopher-ward/c8-p2725-81M.pdf | 19 Aug 2022 | 14 | |
4 | Lindy | 25004 | Product manual | lindy/25004-IP7.pdf | 27 Aug 2023 | 1 | |
5 | LG | DX3471W | Owner's manual | lg/dx3471w-55I.pdf | 21 Jun 2023 | 100 | |
6 | Clay Paky | A.LEDA B-EYE K10 EASY | Instruction manual | clay-paky/a-leda-b-eye-k10-easy-7CH.pdf | 26 Sep 2022 | 28 | 8.23 Mb |
LG
CHLADNIâKANávod na obsluhuTento návod si, prosím, pred pouÏitím chladniãky dôkladne preãítajte a uchovávajte ho pre prípad potreby na dostupnom mieste.
…
REFRIGERATOR(30 pages) |
Eizo
Color LCD MonitorInstallation ManualImportantPlease read this Installation Manual, the Instruction Manual and the Setup Manual carefully to familiarize yourself with safe and effective usage.• The latest manual is available for download from our web site: http://www.eizoglobal.com
…
DuralVision FDF2304W-IP(75 pages) |
IBM
IBM 9503-T221 LCD monitor Updating the EDID settings for your monitor (R1.3) Page 1 of 4 Introduction Modern monitors internally store data on their performance characteristics and capabilities in an abbreviated format. The information is called the monitor Extended Display Identification Data or EDID and is read by operating systems and video grap …
9503-T221(4 pages) |
AUO
Connecting To The DisplayInputs/OutputsQuick Start GuidePFSDM32/PFSDM43/PFSDM50/PFSDM55 Series(P320HVF06/P430HVF07/P500HVF04/P550HVF16 Series)Item Description6 DVIConnects with the digital video output of a computer and other devices.3 Power Switch Switches the main power on/off.1-11-2See “Keypad” for detailed information.Keypad2 Disperses heat from the …
PFSDM32 Series(2 pages) |
Dell
19” LCD Monitor DELL E193FPc THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY.EVERY REASONABLE EFFORT HAS BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE ACCURACY OFTHIS INFORMATION AFTER THE DATE OF PUBLICATION AND DISCLAIMS RELIABILITY FOR CHANGES, ERRORS OR OMISSIONS. Service Manual
…
E193FPc(78 pages) |
UltraView
UM-UV-621-W55-Q215V2 www.austin-hughes.com User Manual dedicated LCD display solutionsDesigned and manufactured by Austin HughesNAP-W55Aluminum front bezelOP-W55Universal Mounting Open FrameAP-W5555” FHD 1920 x 1080 LCDFront NEMA4 / IP65
…
OP-W55(28 pages) |
Creative Sound Card E-MU Digital Audio System 1820MOwner's manual for Creative E-MU Digital Audio System 1820M Sound Card E-MU Digital Audio System 1820M, 120 |
Akura LCD TV ATLDVD2630W-HDAkura LCD TV Instruction manual (File: akura-atldvd2630w-hd-instruction-manual-29, 05th Jan 2024) ATLDVD2630W-HD, 29 |
Kenwood Car Receiver KDC-MP6025KDC-MP6025 (Car Receiver ePDF User Manual, #79P4H7) KDC-MP6025, 40 |
AVERATEC Laptop N2573VH1ELaptop Operation & user’s manual (AVERATEC N2573VH1E) N2573VH1E, 56 |
Rollei Digital Camera Flexline 140Flexline 140 (Digital Camera ePDF User Manual, #7I43W1) Flexline 140, 1 |
Nokia Cell Phone X1-00#ZDRSP4: X1-00 Cell Phone Service manual X1-00, 19 |
Casablanca Fan C39G199LCasablanca C39G199L Manual (Doc Type: Fan Owner's manual) C39G199L, 14 |
vanEE Ventilation Hood 90 HVentilation Hood #57P7N4 90 H, 16 |
Pioneer Car Receiver DEH-P6000UB - Radio / CDPioneer DEH-P6000UB - Radio / CD Manual (Doc Type: Car Receiver Installation manual) DEH-P6000UB - Radio / CD, 4 |
Cisco Switch Nexus 2000 SeriesCisco Nexus 2000 Series Guide (Doc Type: Switch Hardware installation manual) Nexus 2000 Series, 160 |
MTD Tiller 21A-450 SeriesOperator's manual for MTD 21A-450 Series Tiller 21A-450 Series, 20 |
Hilberling Transceiver PT-8000APT-8000A Operating manual - 75G9X5 PT-8000A, 122 |