Panasonic AGMX70 - AV SWITCHER Operating Instructions Manual

Text of Panasonic AGMX70 - AV SWITCHER User Guide:

• 49 [Audio Effects] settings [PAN] setting Set [On] or [Off] using the rotary 3 control. The default setting is [Off]. Select the input channel to be used using the rotary 4 control. Select [L], [R] or [L+R]. The default setting is [L]. Set the output balance using the rotary 5 control. Make the selection from L7 to 0 to R7. The default setting is 0. PAN 1 Off IN Ch L B

• Panasonic AGMX70 - AV SWITCHER, 35 [Color cancel] setting This is used to perform the settings for color cancel. The offset from the [Offset] key can be set to any value from 0 to 255 using the rotary 2 control. The [C Slice] (cancel slice) can be set to any value from 0 to 255 using the rotary 3 control. The [C-Area] (cancel area) can be set to any value from 0 to 3 using the rotary 4 control. The [Mono L] (monochrome level) can be set to any value from 0 to 15 using the rotary 5 control. [Crop] setting This is used to perform the crop sett

• Panasonic AGMX70 - AV SWITCHER, 39 Effect-by-effect setting screens Other key settings (numbers 3301 and up) The pattern keys are opened directly or when selected using the number keys. The size is set using the rotary Z control. With patterns whose positions can be changed, the position can be set using the joystick. Pos’ X 128 Y 128 Z 196 Event ME Time Pattern INT 00E 10:00F 3301 Wht Pattern Key Pattern Edge Effects Off Light On Crop A 2 8 12 7 12 3D Modify Rotate 0 Amp 16 Time 16 Key Learn Empty 9000 Setup Hard Width 0 Color White K Level 255 Luminance Key Ext Key Scrolled dis

• Panasonic AGMX70 - AV SWITCHER, 25 [Video Effects] setting screen [Mosaic] setting Select [On] or [Off] for this effect using the rotary 2 control. The default setting is [Off]. Select [XY] (both horizontal and vertical), [X] (horizontal only) or [Y] (vertical only) using the rotary 3 control. Set the size using the rotary 4 control. Any setting from 0 to 30 can be set for Size, and the setting can be changed in 2- step increments. The default setting is 8. This level setting is used for the level of transition numbers 1001, 1002 and 1003 (200, 201 and 202). Mosaic Off XY Size 8 X Y XY 0 - 30 [Defocus] setting Select [O

• 58 Other settings Setting method One hundred panel statuses can be stored in event memories 0 to 99. Press the Set button, set the event number using the number keys, and enter the setting using [Enter]. Event memory Event 00E Press the [Pattern] button, input the pattern number using the number keys, and execute using [Enter]. If the pattern does not exist, o

• Panasonic AGMX70 - AV SWITCHER, 29 [Video Effects] setting screen <Notes> ≥ In the case of pattern numbers 200 to 211, 1001 to 1034, 213 to 220, 222, 1060 to 1067 and 1069, transitions can be initiated with the DVE setting parameters applied to the B channel. When this is done, the pattern is changed to MIX (56). (With the A bus/B bus) With the preset bus/program bus, the effects are applied to preset, and they are turned off by setting the reverse button to ON. ≥ [Ripple], [Multi], [Spark] and other 3D patterns* 1 can be selected for one channel only, eit

• 86 Title data operations Flow until Title data playback The procedure for transmission of PC images as Title data and DSK playback is as follows. 1) Register the image in the list of Title data for transmission to the AG-MX70 (transmission list). 2) Perform data playback settings. 3) Play back and transmit data manually or automatically. Registering Title data in the transmission list

• Panasonic AGMX70 - AV SWITCHER, 53 [Setup] initial setting screen The LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if the settings are acceptable, enter them using [Enter], and return to the direct pattern settings. Example of transition Pos. X 128 Y 128 Z 196 Event ME Time Pattern INT 00E 10:00F 3015 Wht Direct Pattern Setup Transition Enter to EXIT Modify Effects Off Comp Off Pattern Edge Hard Width 0 Color White If the setting operation is exited part of the way through (by pressing other buttons, etc.), the settings performed so far will not be stored in the memory. The settings of six key patter

• Panasonic AGMX70 - AV SWITCHER, 98 [OTHER] Editor: D-sub 9-pin, RS-422A/232C switchable RS-422A protocol; GVG/Sony switchable Connectable Editor: Panasonic: AG-A850, AJ-A900, SONY: BVE-2000, BVE-910, PVE-500 Tally Out: D-sub 9-pin, open-collector k 8 ch Collector current: Less than 50 mA, Maximum voltage: 35 V DC GPI: BNC k 1, Make-contact USB: Type-B connector k 1, USB Ver.1.1 (cable length: max. 3 m) Specifications [VIDEO INPUT/OUTPUT] Analog component input/output connectors: BNC a 4 (sources 1/2/3/4) Y: 1.0 Vp-p, 75 h Pb/Pr (525): 0.525/0.757 Vp-p switchable, 75 h Pb/Pr (625): 0.7 Vp-p, 75 h Analog composite input/out

• Panasonic AGMX70 - AV SWITCHER, 44 With flag (#6002) Effect-by-effect setting screens Insert Replace CLR KF Copy Paste Exit Flag K Frame 00 K Level 255 Width 192 Angle 64 Time 48 Amp 32 R2: [Width] (flag width) setting R3: [Angle] setting R4: [Time] (fluttering time) setting R5: [Amp] (amplitude) setting 3D parameters are the same as with 3DModify. With accordion (#6003) Insert Replace CLR KF Copy Paste Exit Accordion K Frame 00 K Level 255 Width 192 Angle 64 Amp 32 R2: [Width] (accordion width) setting R3: [Angle] setting R5: [Amp] (amplitude) setting 3D parameters are the same as with 3DModify. With the perspectives group (#6006 to #6007) Insert Replace CLR KF

• Panasonic AGMX70 - AV SWITCHER, 48 DSK/Fade settings [Fade] settings These are used to perform the fade settings. The image to be faded is selected from [Black], [White] or [Blue] using the rotary 2 control. The default setting is [Black]. [On] or [Off] is selected for [Audio] fading using the rotary 3 control. The default setting is [On]. [After] or [Pre] is selected for [Phone] fading using the rotary 4 control. At [After], the sound is heard with the fading effect applied to the images; at [Pre], it is heard with no fading effect applied to the images. The default se

• Panasonic AGMX70 - AV SWITCHER, 10 Parts and their functions A LCD CONTRAST control This control is used to adjust the contrast of the LCD display. B SET UP (initial setting page display) button This button displays the initial setting page. D DSK FADE (DSK/fade setting page display) button This button displays the DSK/fade setting page. C INT VIDEO (internal video setting page display) button This button displays the internal video setting page. E AUDIO EFFECTS (audio effect setting page display) button This button displays the audio effect setting page. Modify EVENT RECALL EFFECTS ON FOLLOW SET AUDIO DR 13 2 4 EVENT RECALL button This button is

• Panasonic AGMX70 - AV SWITCHER, 82 OFF The operation at the time of DSK OFF will be displayed. The display contents are the same as for DSK ON. When double-clicked, the Properties window (page 86) will open. 8 NAME/COMMENT The name given to the data will be displayed. When double-clicked, the Properties window (page 86) will open. 9 Screen descriptions TYPE The data playback format will be displayed. When double-clicked, the Properties window (page 86) will open. 7 Duration (This appears only when Auto Trigger of DSK OFF is valid.) Data playback format Still Movie Once Movie Repeat Crawl Roll List mode 1 2 3 4 5 6 7 8 9 For data with a Mark setting, the Mark number is d

• 57 [Setup] initial setting screen Audio Level Alignment –3dB Head 18dB –3dB 0dB 4dB 18dB 20dB [Audio Level] setting The [Alignment] (alignment) level is set using the rotary 2 control. [–3 dB], [0 dB] or [4 dB] can be selected. The default setting is [4 dB] for NTSC and [0 dB] for PAL. The [Head] (headroom) is set using the rotary 5 control. Either [1

• Panasonic AGMX70 - AV SWITCHER, 27 [Decay] setting The A and B multi strobe, transition, Key, DSK shadow and trail cannot be selected at the same time. Only one of these effects is valid at a time. Select [On] or [Off] for the effect using the rotary 2 control. Any time setting from 0 to 32 can be selected using the rotary 3 control. The default setting is 16. This level setting is used for the level of transition number 1066 (219). Decay Off Time 16 0 - 32 [Paint] setting Select [On] or [Off] for the effect using the rotary 2 control. Any level setting from 0 to 7 can be selected using the rotary 3 control. The default setting is 4. This level setting is used for the level of transition numb

• Panasonic AGMX70 - AV SWITCHER, 9 SET UP INT VIDEO DSK FADE AUDIO EFFECTS POS.X 119 Z 235 X 107 EVENT 00 E ME Time 02:00 F Pattern 2101 INT Wht Transition Pattern Edge Effects Hard Off Light On MoModifdify CONTRAST DR Parts and their functions Setting panel area LCD (liquid crystal) display The effect parameters, time settings and other information are shown on this display. 1 9 A 2 Joystick, Z parameter display area During positioning, the X/Y/Z parameters are displayed here; during the color settings, the Pb/Pr/Y parameters are displayed. 3 Audio level meter This indicates the level of the output sound. 4 Event number display area The event numbers are displ

• Panasonic AGMX70 - AV SWITCHER, 92 Other operations Setting the initial properties The initial values for the properties to be used with new data can be set on the “Initial set of Property Data” setting screen. 1) Select “Initial set of Property Data” from the Tools menu of the main window. The “Initial set of Property Data” setting screen is displayed. 2) Set the individual items and click the “OK” button to change the settings. All settings can be returned to the initial value by pressing the “Cancel” button. Still Duration The duration is set for when Still is used as the dat

• Panasonic AGMX70 - AV SWITCHER, 40 Effect-by-effect setting screens 3D Modify Rotate 128 Time 0 TransF 255 0 - 255 0 - 255 0 - 255 3D Modify Width 192 Angle 96 Time 48 Amp 32 0 - 255 0 - 255 0 - 255 0 - 255 3D Modify Width 160 Angle 96 Amp 48 0 - 255 0 - 255 0 - 255 3D Modify Rotate 128 Axis 0 View 128 Depth 64 0 - 255 0 - 255 0 - 255 0 - 255 [3Dmodify] setting This takes effect only for the special 3D patterns (numbers 6001 to 6438 and 6601 to 6716) when the 3D optional board (AG- VE70) has been installed. The parameters of the pattern

• Panasonic AGMX70 - AV SWITCHER, 76 Processing of image data ∫ Management of the image memory ≥ Memory capacity Images transmitted from the PC are stored in the AG-MX70’s image memory. The memory capacity differs, depending on the AG-MX70’s video format setting. NTSC: 30 pages (1 page = amount of memory required for 1 image on Monitor 1 screen) PAL: 26 pages The image memory is divided into separate areas for Title data and IntVideo data and capacity can be allocated freely as required. ≥ DIVIDE The number of memory pages used differs, depending on the number of vertical pixels, however this only applies when images are t

• 66 Transition patterns Page2 +Diss 2118 2168 2119 2169 2120 2170 2121 2171 2122 2172 2123 2173 2124 2174 2125 2175 Page3 +Diss 2131 2183 2132 2184 2133 2185 2134 2186 2135 2187 2136 2188 2137 2189 2138 2190 Sphere 2DComp +Diss 2201 2231 2202 2232 2203 2233 2204 2234 2205 2235 2206 2236 2207 2237 2208 2238 2209 2239 Accordion Flag1 2DComp +Diss 2401 2461 2402 2462 2403 2463 2404 2464

• Panasonic AGMX70 - AV SWITCHER, 96 Before calling for service Problem What to check ≥ The Title data has been cleared, but the data has not been deleted from the image memory. When Protect has been set for the data, it will not be cleared even when clearing is performed from the menu of the main window. To clear data with the Protect setting, perform the clearing operation from the memory status window. ≥ The button display of main window is abnormal. In a Windows 98 environment with certain video cards, the button display may become abnormal. Even if this problem should occur, operation of this software will not be influenced. It may be possible to eliminate the problem using one of

• Panasonic AGMX70 - AV SWITCHER, 80 Startup and shutdown Screen descriptions How to start up MX-Navi Select “Program” > “Panasonic AG-MX70” > “MX-Navi” from the Windows Start menu. How to shut down MX-Navi Shutdown is possible in the following two ways. ≥ Click the button at the right top of the main window. ≥ Select “Exit” from the “File” menu of the main window. 1 2 3 4 5 6 7 8 9 For data with a Mark setting, the Mark number is displayed. For details on Mark settings, refer to page 87. 1 This is displayed for data with the Pro

• Panasonic AGMX70 - AV SWITCHER, 50 [Audio Effects] settings [EQ Mid] equalizer midrange setting The [M Level] midrange level can be set in 2 dB intervals to any value from –14 dB to 0 to +14 dB using the rotary 3 control. The default setting is [0]. The midrange frequency can be set to any value from 100 Hz to 10.2 kHz using the rotary 4 control. The default setting is 1.01 kHz. Select [0.5], [1], [2] or [5] for Q using the rotary 5 control. The default setting is [0.5]. [Voice Change] (voice changer) setting This is used to set the voice changer. Set [On] or [Off] using the rotary 3 control. The default setting is [Off]. Set [Up] or [Down] for the [Pitch] using the rotary 4 control. The default setting is [Up

More Instructions:

Panasonic AGMX70 - AV SWITCHER Brochure & specs 29-04-2023 6

DOWNLOAD

Related Products and Documents (Music Mixer):

Comparable Devices:

Similar Resources:

• Boss RC-20XL (40 pages) Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual …

• Toa D-2000 (8 pages) Thank you for purchasing TOA's Digital Mixer. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.D-2000 SERIESDIGITAL MIXERUSER'S MANUALPLEASE READ THIS MANUAL FIRST!1. IMPORTANT SAFETY INSTRUCTIONS ........................................................................................ 22. SA …

• Rolls RSE261 (4 pages) RSE261Dual Sonic Exciter(with SCE Processing)OWNERS MANUALROLLS CORPORATIONSALT LAKE CITY, UTAH2/02CLIPACTIVEACTBOTTOM DEFINITIONCHANNEL ONEPWRCLIPTIVEBOTTOM DEFINITIONRSE261CHANNEL TWO …

• CM MotorMix (18 pages) 20621 Plummer Street • Chatsworth, CA 91311 USA • (888) 588-6434 • cmautomation.comCreative Tools for New Technologies™Digital Mixer WorksurfaceOwner’s ManualVersion 2.0Before you call us with your questions,please read the manual at least once.This way we can improve the quality ofour customer support and create better manuals.The manual provides …

• Zahl IM1 (7 pages) IM1 M/S INSERT MASTER IM1 Preliminary Manual 10.2017 www.zaehl.com Page 1 of 7 ...another AM1 spin-off in the 500 series format AM1 is our state-of-the-art pure analog mixing console delivering superb sound quality and comprehensive func-tionality. IM1 packs the functionality of the AM1 INSERT and STEREO stages and several added controls into a 2-slot …

• IMG STAGE LINE MPX-620 (24 pages) Stage LineRBEDIENUNGSANLEITUNG • INSTRUCTION MANUAL • MODE D`EMPLOI • ISTRUZIONI PER L´USOGEBRUIKSAANWIJZING • HANDLEIDING • MANUAL DE INSTRUCCIONES • MANUAL DE INSTRUÇÕESBRUGSANVISNING • BRUKSANVISNING • KÄYTTÖOHJESTEREO-DISCO-MISCHPULTSTEREO DISCO MIXERTABLE DE MIXAGE STÉRÉO POUR DISCOTHÈQUEMIXER STEREO PER DISCOTECAMPX-620 Best.-Nr …

Comments, Questions and Opinions: