Manualios.com

Panasonic AF-FX100 Setup Instructions

Panasonic AF-FX100 Manual Online:

4.35, 1277 votes
Panasonic AF-FX100 User Manual
Panasonic AF-FX100 User Guide
Panasonic AF-FX100 Online Manual

Text of Panasonic AF-FX100 User Guide:

  • Panasonic AF-FX100, 54 55 Version acquisition of the parameter setting application Display the application version. Step 1 Select "About" from the menu bar "Help". Step 2 The pop-up window of the version information will be displayed.  Click the [OK] button. * The version of the above image may differ from the actual version. How to update the program The program of the BOX is updated.

  • 32 33 Camera authentication information setting The username and password needed for communication with cameras are determined. Step 1 Select "Camera Authentication" from the menu bar "BOX Utility".  The camera authentication information dialog will be displayed. Step 2 Clicking the [OK] button after entry of a username and a password allows the entered username

  • Panasonic AF-FX100, 6 7 •Use this product in a network secured by a firewall, etc. •If this product is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware pro- gram, etc.). •Install a password-protected screen saver on PCs that access this unit. •Be sure to close all the browsers after access to this unit as an administrator. Management Be sure to note the following point: •Inadequacies in management such as inappropriate installation location or information leakage or outflow caused by inadequacies in definit

  • Panasonic AF-FX100, 46 47 All area deletion This operation is performed when the whole recognition target area is deleted for the items selected in "Content of Recognition" of "Area Setting". How to delete the all area Step 1 Select the content of recognition. Select "Content of Recognition" of the "Area Setting" to delete all areas. If both [Intrusion] and [Object abandonment/removal] are checked, area information on both in all areas is deleted. Step 2 Click the [Delete All] button.  The warning pop-up window will be displayed. Step 3 Select [Yes] to delete the all area.  The window will b

  • Panasonic AF-FX100, 6 7 Image recognition This unit is equipped with the following image recognition functions. Presetting of detection conditions allows this unit to detect human intrusion, abandoning an object, and removing an object on a screen. When human intrusion, abandoning an object, or removing an object is detected, the detection frame and trajectory can be displayed on the screen. In addition, by setting the human size, it is also possible to designate the size of an object and the motion range of a human. Up to 2 cameras can be simultaneously operated for the image recognition function. Intrusion detection The motion of an object is detected on the image that is shot by

  • Panasonic AF-FX100, 16 17 Setting and checking of BOX using Web browser Logging into BOX Follow the steps below to log in the BOX. Step 1 Visit the URL, "http://***.***.***.***/box/index.html", using Internet Explorer. "***.***.***.***" represents the IP address. That is "192.168.10.10" if the default is not changed, and accordingly the URL becomes "http://192.168.10.10/ box/index.html". The access window will be displayed. Step 2 Enter the user name and password. Default User name: admin Password: panasonic If the username or password

  • 8 9 Input and output devices Input camera/encoder The table below shows cameras and encoders connectable to this unit and settings to receive images by this unit. To receive sound from a camera at the PC side after camera connection, follow the settings in the table below. Input Main settings 1 DG-NP502 Camera title/ Date/time display setting: OFF Image capture mode: 1.3 mega pixel JPEG settin

  • Panasonic AF-FX100, 28 29 Obtain the syslog data file of the BOX The syslog data file can be obtained from the BOX. When contacting us, please send us the downloaded file. Step 1 Select "1.Status check" on the BOX configuration page (+ page 17).  The setup confirmation window will be displayed. Step 2 Select "4.Log download".  The syslog download window will be displayed. Step 3 Click "Click here to execute".  The "File download" window will be displayed. Save the file appropriately.

  • Panasonic AF-FX100, 30 31 Obtaining version information of the BOX The version numbers of software programs on the BOX are displayed. When contacting us, please let us know the contents on the version number window. Step 1 Select "1.Status check" on the BOX configuration page (+ page 17).  The setup confirmation window will be displayed. Step 2 Select "5.Version".  The version number window will be displayed. * The version of the above image may differ from the actual version.

  • Panasonic AF-FX100, 42 43 Tab switching The contents displayed in the area information display area vary with settings of "Area Setting" or "Specification of Human Size" and the combination of tab display. If the tab is switched when [Add Area]/[Delete Area] of "Action Entry" are checked, •[Intrusion] tab The area information on [Intrusion] is displayed in the area information display area. [Intrusion] is checked in "Content of Recognition" of "Area Setting" at the same time. •[Object]

  • Panasonic AF-FX100, 62 63 When intrusion detection occurs a. Even "Camera 3" is registered with "CH3" of the encoder and an event occurs in the area of "Camera 3", the display shows that an alarm occurs in the area of "Camera 1". b. Decide by the encoder name displayed in the device tree panel. b a

  • 2 3 CONTENTS Limitation of liability ................................................... 3 Disclaimer of warranty ............................................... 3 Preface ...................................................................... 4 About the user manuals ........................................ 4 System requirements for a PC ...................

  • Panasonic AF-FX100, 12 13 Setting of connected PC Network Setting of PC The PC connected to the BOX should have an IP address capable of communicating with the BOX and needs to be connected to a network. Determine the IP address of the PC capable of accessing the BOX without any duplication of the IP address assigned to the BOX and the IP address of any one of devices connected to the network. Web browser setting of PC All the access to the BOX is performed via the Web. Follow the steps below to obtain correct display. 1. Click "Tools" and "Internet Options" and select [Advanced] tab. 2. Uncheck

  • Panasonic AF-FX100, 58 59 When exiting from the application without saving edited parameters, an alarming pop-up message is displayed. If exiting from the application without saving, click the [Yes] button. If the parameters should be saved, click the [No] button.

  • 32 33 Application setup Setting of target BOX The IP address of the target BOX is specified. The target BOX can be specified by direct entry or selection from the BOX IP List. If no " boxip.csv" file is included in the save folder and the IP address of the target BOX cannot be read, the BOX IP List is not displayed. Login information setting Enter the user name and password are

  • Panasonic AF-FX100, 66 67 Variable name Message Settings Description 13 IPADDR_AVMDINFO_ ON* 2 IP address* of feature extraction pc (eight or less IP addresses can be set). Pv4 address(decimal) Optional This is the IP address of DG-ND400 or the IP address of DG-ASM100 with which you like to display the image data of "Distribution of image with pro- cessing results 2 (detection frame information in the JPEG header of input image)". Up to 8 IP addresses can be registered. Unless otherwise specified, leave this blank. E.g.: 192.168.10.31 14 IPADDR_OSD_ON * 3 IP addr

  • Panasonic AF-FX100, 28 29 Check syslog of the BOX System logs saved in the BOX are displayed. However, turning the power of the BOX off and on again deletes all the contents. When contacting us, please let us know the contents on the log window. Step 1 Select "1.Status check" on the BOX configuration page (+ page 17).  The setup confirmation window will be displayed. Step 2 Select "3.Logs".  The log window will be displayed. The [reslog] and [syslog] fields are displayed on the window. Refer to the [syslog] field for system log check. Note: •The available capacity for saving system logs in the BOX is up to 32 MB. When saved

  • Panasonic AF-FX100, 34 35 Reading the local file "box.tar.gz" in the save BOX folder in the save folder is decompressed, and parameters are read into the application. To read parameters from the local file, select "Open" from the menu bar "Parameter File". To refer to the folder made with the IP address of the target BOX, the IP address of the target BOX needs to be entered or selected from the BOX IP List. Caution: •When a compressed file is decompressed, a work folder ("<application installation folder>\temp&qu

  • Panasonic AF-FX100, 18 19 Set the BOX IP address The IP address, subnet mask, etc. of the BOX are configured. Step 1 Select "2.Settings" on the BOX configuration page (+ page 17).  The setup window will be displayed. Step 2 Select "1.IP address setting".  The address setting window will be displayed. Step 3 After entering each IP address (+ page 19), click the [Execute] button.  The reboot request window will be displayed. Step 4 Click the [reboot] button.  The success window will be di

  • Panasonic AF-FX100, 4 5 Software license •This product contains software licensed under GPL (GNU General Public License), LGPL (GNU Lesser General Public License), etc. •Transfer, copy, disassembling, decompilation, reverse engineering, and also exporting in violation of export laws of software provided with GNU General Public License are prohibited. However, libraries licensed under LPGL are not applicable to prohibited matters such as disassembling. •Customers can duplicate, distribute and modify the source code of the software under license of GPL and/ or LGPL. (The source code is included in the supplied CD-ROM.) •Ref

  • 46 47 Backward/forward When the area information in one and the same Pattern is edited sequentially, the past 9 pieces of the area information (10 pieces of the area information including the present area information) are recorded, and press- ing the [Back] and [Forward] buttons can go back and forth among the 10 pieces of the area information. However, if a tab or Pattern is switched

  • Panasonic AF-FX100, 8 9 Major operating controls and their functions Front panel ① [POWER] indicator (green) Lights when the power is on. ② [ALARM1] indicator (red) Not used. ③ [ALARM2] indicator (orange) Lights when an IP address is duplicately detected at BOX start-up. ④ [RESTART] button Restarts this unit. Rear panel ① [MODE] If you forget the IP address of the BOX, the user- name/password for the Web login, start up the BOX assigned to "8". Return to "0" after ensuring that initialization is completed. Default: IP address: 192.168.10.10 User name: admin Password: panasoni

  • Panasonic AF-FX100, 36 37 Parameter setting Selecting the entry location of the parameter to be edited allows the parameter information to be displayed in the message box. Parameter setting should be performed on the basis of the parameter information displayed in the message box. Range contents of parameter information Indication Range figure (1) to figure (2) Range from figure (1) or more to figure (2) or less $$IPv4 IP address (including the case that IP is not set) $$ character count Limit of character count (no lim

  • Panasonic AF-FX100, 48 49 How to specify [Bottom] of "Specification of Human Size" Step 1 Select the [Bottom] position of "Specification of Human Size". Step 2 After left-clicking a point on the human size display area, select a rectangular area by dragging. After selecting a rectangular area, right-click the area to display the previous settings. Resetting can also be performed by left-clicking and dragging again. Step 3 Click the [Decision] button to check the selected rect- angular area.  The setting values take effect "H", "V", "x", and "y" in the "Specification of Human Size" field. L

  • Panasonic AF-FX100, 40 41 Get Image from FILE Read and display the JPEG image from local file. Step 1 Click the [Get Image from FILE] button.  The image selection dialog will be displayed. Select the JPEG image. The opened JPEG file will be displayed in the image display area. The image will be resized and displayed while main- taining the aspect ratio of the image display area.

  • Panasonic AF-FX100, 68 68 Standard Accessories Installation Guide ................................................................. 1 pc. AC adapter ..........................................................................1 pc. CD-ROM* ............................................................................1 pc. * The CD-ROM contains the "Setup Instructions (PDF)", parameter setting application, etc.

  • Panasonic AF-FX100, 22 23 Download the parameter for the image recognition library The parameters read into the image recognition library on the BOX are transferred to the PC (downloaded). For parameter operation for image recognition, go to "parameter setting application". Step 1 Select "2.Settings" on the BOX configuration page (+ page 17).  The setup window will be displayed. Step 2 Select "5.Parameter download".  The parameter download window will be displa- yed. Step 3 Click "Click here to execute".  The "File Download" dialog will be

  • 10 11 External output The table below shows the outputs of the BOX. Output Description Destination devices 1 Through image This image is for monitoring in real time. The output of a camera is transferred as it is with minor delay. DG-ASM100* 1 , DG-ND400, AF-SX100S 2 OSD image* 2 This image is with which a monitoring area, a detection point, and a detection factor

  • Panasonic AF-FX100, 48 49 How to specify human size The human size displayed in an image is specified. [Top] of "Specification of Human Size" is a setting value to decide the size of the innermost human in an image. [Bottom] of "Specification of Human Size" is a setting value to decide the size of the most front human in an image. These 2 settings become the indicator to decide whether an object in an image is a human or not. How to specify [Top] of "Specification of Human Size" Step 1

Related Products and Documents (Network Accessory):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Philips 32PW978B/54 Operating instructions manual philips/32pw978b-54-9F2.pdf 19 Apr 2023 51 2.12 Mb
2 Fresh Breeze Monster Assemble and operation fresh-breeze/monster-C17.pdf 23 Aug 2022 40
3 Hama I 600 Operating instruction hama/i-600-36Q.pdf 21 Dec 2023 26 2.94 Mb
4 Panasonic EH2571P Operating Operating instructions manual panasonic/eh2571p-operating-SP5.pdf 27 Feb 2024 28 0.76 Mb
5 XM Satellite Radio xm2go Manual  xm-satellite-radio/xm2go-8MD.pdf 01 Feb 2023 15 0.96 Mb
6 JUNO JGI3423 Operating instructions manual juno/jgi3423-ME2.pdf 26 Nov 2023 9

Similar Resources:

  • NEC

    Univerge SV9100

    (48 pages)
    SV9100 InUC User Guide Please read this manual carefully before operating this product and save this manual for future use. …
  • NEC

    SL1100

    (4 pages)
    Hotel Room Extension User Guide Smart Communication Server Please read this manual carefully before Operating this product and save this manual for future use. …
  • Valcom

    VIP-802

    (5 pages)
    1 947987 ISSUE 5 VIP-802 DUAL ENHANCED NETWORK AUDIO PORT INTRODUCTION The VIP-802 Dual Enhanced Network Audio Port enables voice access to two zones of one-way paging over an IP network, allowing page zones to be extended anywhere network connectivity is available. The VIP-802 can be programmed as a SIP (Session Initiation Protocol) device with two …
  • H3C

    S7500 Series

    (14 pages)
    Operation Manual – Overview H3C S7500 Series Ethernet Switches Table of Contents i Table of Contents Chapter 1 Documentation Obtaining........................................................................................... 1-1 1.1 CD-ROM .................................................................................................................... …
  • Extreme Networks

    AG200

    (40 pages)
    Extreme Networks, Inc.3585 Monroe StreetSanta Clara, California 95051(888) 257-3000(408) 579-2800http://www.extremenetworks.com Sentriant AG200 Hardware Installation GuidePublished: June 2008Part number: 100317-00 Rev. 01 …
  • Genexis

    Pulse

    (6 pages)
    SSID: Genexis-xxxxWiFi-Key: **************WARNING: POWER RATING:12V 2AGUI: http://Genexis-xxxxUsername: userPassword: userMade in ChinaModel: PulseP/N: 99618025Version: 1.0Date: 2018-05PulseWiFi Repeater/ExtenderQuick Installation GuideManual pairingConnect to your Pulse WiFiConsult the information label at the bottom of your Pulse. It shows the SSID of …

Comments, Questions and Opinions: