Manualios.com

Grundig RRCD 3720 DEC Operation & User’s Manual

  • RRCD 3720 DEC Portable Stereo System
  • malvnmpkssUlI
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 25

Grundig RRCD 3720 DEC Manual Online:

3.35, 1754 votes
Grundig RRCD 3720 DEC User Manual
Grundig RRCD 3720 DEC User Guide
Grundig RRCD 3720 DEC Online Manual

Text of Grundig RRCD 3720 DEC User Guide:

  • ENGLISH 41 For MP3/WMA mode using a USB stick, MP3 player or SD/MMC memory card, the same play- back and search functions are available as for CD/MP3/WMA mode (see pages 16 to 19). Playing the contents of an MP3 player or USB memory stick 1 Plug the USB memory stick or the USB cable of the MP3 player into the USB interface »USB«. 2 Switch on the device and select the USB in

  • Grundig RRCD 3720 DEC, 36 Storing stations as presets Up to 20 stations in the FM band and up to 20 stations in the MW band can be stored as presets. 1 Press »FUNCTION« to select the frequency band (FM or MW). – Display: »FM« or »MW«. 2 Select the station with » 8« or »9«. 3 Press »PROG./RAND.« briefly to activate the memory function. – Display: »00« and »PROGRAM«flash for approx. 10 seconds. 4 Press » ɶ « or » ʺ « to select the preset. 5 To store the station, press »PROG./RAND.« again. – Display: e.g. »10« and »PROGRAM«. 6 To store more stations, repeat steps 2 to 5. Selec

  • Grundig RRCD 3720 DEC, ENGLISH 43 Recording from the radio 1 Insert a tape without deletion protection and search for the desired tape position with » ľľ « or » ıı «. 2 Press »FUNCTION« to switch to the TUNER input source and select the radio station. 3 Press » • « to start recording. – The » ľ « button is automatically engaged. – The device automatically stops recording at the end of the tape. 4 Press »II« to pause recording. Press »II« to resume recording. 5 Press » 7 ə « to stop recording. Recording from the CD, CARD or USB input sources 1 Insert

  • Grundig RRCD 3720 DEC, 26 Controls General information ON/OFF Switches the device to and from standby mode POWER • Mode indicator. Lights up red during operation. • Infrared sensor for remote control signals (left, next to the display). FUNCTION Switches between the RADIO, TAPE, CD, CARD and USB input sources. + VOLUME – Adjusts the volume and the USER equaliser (BASS and TREBLE). UBS Switches the Ultra Bass System on and off. DSC Switches between the sound settings USER, JAZZ, ROCK, CLASSIC, POP and back to USER. 0 Headphone jack for connecting a stereo headphone set with a jack plug (3.5 mm). This automatically switches off the loudspeakers. AC~ Socket for connecting the power co

  • Grundig RRCD 3720 DEC, 44 Cleaning the tape drive To guarantee good recording and playback quality, the parts shown (1, 2, 3) should be cleaned after every 50 hours of use, or once a month. Open the tape compartment, moisten a cotton swab with alcohol or a special head-cleaning fluid and clean the idler (3), the capstan (2) and the magnetic heads (1). Close the tape compartment. You can also play a cleaning cassette to clean the magnetic heads (1). Protect your tapes against moisture, dust, heat and cold. Do not store your cassettes near devices with strong magnetic fields such as television sets or stereo speakers. After using a cassette, put it back in its protectiv

  • Grundig RRCD 3720 DEC, ENGLISH 29 ľľ Fast forwards the tape to the end. ıı Rewinds the tape to the beginning. ľ Starts playback. • Starts recording. USB and SD/MMC mode USB USB interface for connecting an MP3 player or USB memory stick. SD/MMC Card slot for a SD or MMC memory card. OVERVIEW ______________________________________________________

  • Grundig RRCD 3720 DEC, ENGLISH 37 The device is suitable for music CDs displaying the logo shown here (CD-DA) and for CD-Rs and CD-RWs with audio data or MP3 and WMA formats. In MP3 mode, the terms “album” and “file” are very important. “Album” corresponds to a folder on a PC, “file” to a file on a PC or a CD-DA track. The device reads MP3 data with a maximum of 255 tracks per folder. An MP3 CD may not contain more than 511 tracks and 256 folders in total. The device sorts the folders, or the tracks in a folder, by name into alphabetical order. If you want to order them differently, change the name of the track

  • Grundig RRCD 3720 DEC, 46 Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. Therefore, do not throw the product away with normal household waste at the end of its service life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging. Please find out about collection points operated by your local authority. Help protect the environment by recycling used products. Additional information for units sold in the UK. Units sold in the

  • Grundig RRCD 3720 DEC, 30 Displays 00000:00 General information: various function displays. In tuner mode: shows the waveband and the frequency. In CD-DA mode: shows the total number of tracks and the total playing time. Shows the current track and its elapsed playing time. In MP3/WMA, USB and SD/MMC mode: shows the total number of folders and tracks. Shows the number of the current track and its elapsed playing time. In CD, USB and SD/MMC mode: displays the playlist place when creating a playlist. REPEAT 1 In CD, USB and SD/MMC mode: a track is repeated. REPEAT ALL In CD, USB and SD/MMC mode: all tracks are repeated. REPEAT In MP3/WMA, USB and SD/MMC mode: all tracks in the current FOLDER f

  • Grundig RRCD 3720 DEC, ENGLISH 35 RADIO MODE _________________________________________________ Antennas 1 For FM reception (VHF), extend the telescopic »Antenna«. Note: If the FM signal is too strong, it is advisable to push in the telescopic antenna. 2 The radio has a built-in rod antenna for MW reception. Turn the device around to align the antenna. Selecting the radio input source 1 Press »FUNCTION« to select TUNER as the input source. – The most recently selected station is activated (Last Station Memory). Tuning and storing radio stations Automatic station search After the device has been connected to the mains for the first time, in FM radio mode, the device searches for ra

  • Grundig RRCD 3720 DEC, ENGLISH 31 OVERVIEW ______________________________________________________ SD The CARD input source is selected. PROGRAM In tuner mode: flashes when storing a radio station, lights up in preset mode. In CD, USB and SD/MMC mode: flashes when a playlist is created. Lights up when a playlist is played. MHz FM (VHF) frequency display. kHz MW (medium wave) frequency display. The remote control ON/OFF Switches the device to and from standby mode. CD ı II In CD, USB and SD/MMC mode: starts and pauses playback. ɶ In

  • Grundig RRCD 3720 DEC, 28 PROG./RAND. Saves CD tracks to create a playlist, plays tracks in random order. REP./INTRO For repeating a track, a track in a folder (only MP3/WMA) or all tracks on a CD, for playing the intros to tracks. ɶ In MP3/WMA mode: switches to next folder during playback. When the device is stopped, displays the next folder number (switches to next folder number when stopped, start playback with the first track of the selected folder, the current folder and current track are displayed). ʺ In MP3/WMA mode: switches to previous

  • Grundig RRCD 3720 DEC, ENGLISH 33 Power supply Mains operation Check that the mains voltage on the type plate (on the bottom of the device) corresponds to your local mains supply. If this is not the case, contact your specialist dealer. 1 Plug the power cord supplied into the »AC~ 230V« socket on the back of the device. 2 Plug the power cord into the wall socket. Caution: The device is connected to the mains with the power cord. Pull out the power cord when you want to completely disconnect the device from the mains. Unplug the mains plug to disconnect t

  • Grundig RRCD 3720 DEC, ENGLISH 27 Radio unit Antenne Telescopic antenna for FM (VHF) reception FUNCTION Selects the FM frequency band (VHF) or MW (medium wave). PROG./RAND. Starts and stops the automatic station search, stores radio stations. 8 TUNE 9 Pressing and holding down starts the forwards or reverse frequency search, pressing briefly switches the frequency back or forwards in steps. ɶʺ Forward and reverse preset selection. FM MODE 7 Switches between FM stereo and mono reception. CD unit OPEN ə Opens and closes the CD compartment. ı II Starts and pauses playback. 8 TRACK 9 Press briefly to select the next or previous track. Press and hold down to start a

  • Grundig RRCD 3720 DEC, 2 3 Sicherheit und Pflege 15 CD-Betrieb 4 Auf einen Blick 19 USB- und SD/MMC-Betrieb 12 Allgemeine Funktionen 20 Cassetten-Betrieb 13 Radio Betrieb 22 Informationen 25 Care and safety 37 CD mode 26 Overview 41 USB and SD/MMC mode 34 General functions 42 Cassette mode 35 Radio mode 44 Information 47 Sécurité et entretien 59 Mode CD 48 Vue d’ensemble 63 Mode USB et SD/MMC 56 Fonctions générales 64 Mode cassette 57 Mode radio 66 Informations 69 Sicurezza e cura 81 Funzionamento CD 70 In breve 85 Funzionamento USB e SD/MMC 78 Funzioni generali 86 Funzioname

  • Grundig RRCD 3720 DEC, 40 Playing back a playlist 1 Press » ı II« to start playing the playlist. – Playback begins with the first programmed track. 2 Press »FM MODE 7 « to end playback. 3 To play the playlist again, press »PROG./RAND.« and then » ı II««. Replacing or adding tracks 1 When the device is stopped, keep pressing »PROG./RAND.« until the number of the track you want to replace appears in the display. 2 Select the number of the new track by pressing »8« or »9«. 3 Save the new track by pressing »PROG./RAND.«. Deleting the playlist 1 Press »OPEN ə « to open the CD compartment (the

  • Grundig RRCD 3720 DEC, 38 2 Press » ı II« to resume playback. Note: Playback also resumes at the beginning of the same track if you switch from CD mode to another input source and then back to CD mode or if you switch to CD mode again from standby. Repeating the current track 1 Briefly press »8« during playback. – The track is repeated from the beginning. Selecting another track 1 During playback, keep pressing »8« or »9« until the number of the track you want to hear appears in the display. – Playback of the selected track starts automatically. Searching for a passage within a track 1 During playback, press »8« or »9« and hold it down until you have found the passage. – If »8« or »9« a

  • Grundig RRCD 3720 DEC, ENGLISH 25 To ensure that this device provides you with long-term satisfaction and enjoyment, please observe the following instructions. This device is designed for the playback of audio signals. Any other use is expressly prohibited. Protect the device and the CDs from rain, moisture (dripping or splashing water), sand and heat. Do not leave it next to heaters or inside parked cars in the sun. Make sure there is adequate ventilation when positioning the device. There must be a free space of at least 10 cm behind the device. Do not place objects on the ventilation slots. Do not cover the device with newspapers, table cloths, curtains, etc. Do not place any vessels containing l

  • Grundig RRCD 3720 DEC, ENGLISH 39 Repeating all tracks (Repeat All) 1 During playback, press »REP./INTRO« repeatedly until »REPEAT ALL« appears in the display. – The whole CD is played in a loop. 2 To quit the function, press »REP./INTRO« repeatedly until the repeat indicator (»REPEAT«) goes out. Playing the start of each track (intro) 1 In stop mode, press »REP./INTRO«. – Display »INTRO«. – The first ten seconds of each track are played. 2 To quit the function, press »REP./INTRO« until all the repeat symbols and »INTRO« disappear from the display. Playing back tracks in random order 1 Press »PROG./RAND.« during playback. – Di

  • 42 Selecting the tape input source 1 Press »FUNCTION« to select the TAPE input source. – Display: »TAPE«. 2 Press » 7 ə « to open the tape compartment. 3 Put a tape into the compartment with the open side facing upwards and the full reel on the right side. 4 Close the tape compartment. Tape playback 1 Press » ľ « to start playback. – Playback ends at the end

Related Products and Documents (Portable Stereo System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Klipsch The Capitol Three Special Edition Manual  klipsch/the-capitol-three-special-edition-Q14.pdf 06 Oct 2023 24
2 Essex Electronics KE-1701 Operation & user’s manual essex-electronics/ke-1701-52D.pdf 25 Aug 2022 4
3 Harbor Freight Tools 37822 Set up and operating instructions manual harbor-freight-tools/37822-976.pdf 08 Sep 2022 16 0.37 Mb
4 Motorola Motorokr U9 Getting started manual motorola/motorokr-u9-5DL.pdf 30 Aug 2022 10
5 Freggia HA640 Operation & user’s manual freggia/ha640-IBB.pdf 14 Nov 2023 40
6 Aiwa RM-P33 Service manual aiwa/rm-p33-367.pdf 09 Aug 2022 6

Similar Resources:

  • Sony

    MDR-G55LP/BR

    (1 pages)
    Folding mechanism for easy carryingWing t mechanism for comfort wearingSingle sided cord which is suitable for outdoor usageChangable caps- packaged with black and red capsSpecications©2008 Sony Electronics Inc. All rights reservedSony is a trademark of Sony. All other trademarks are property of their respective owners.Features and specications ar …
  • August

    SE50

    (5 pages)
    SE50 Boombox Bluetooth avec Radio FMBluetooth Boombox mit FM Radio Boombox Bluetooth con Radio FMBoombox Bluetooth con Radio FM Bluetooth Boombox with FM RadioENFRDEITES …
  • Philips

    MCS225

    (8 pages)
    SMART. VERY SMART.User guideCD SoundmachineMCS225Need help? Call us!Magnavox representatives are ready to help you with any questions about your new product. We can guide you through Connections, First-time Setup, or any of the Features.We want you to start enjoying your new product right away!CALL US BEFORE YOU CONSIDERRETURNING THE PRODUCT!1-800-705-2000 …
  • Tivoli Audio

    PAL +

    (2 pages)
    OWNER'S MANUALThe PAL uses a sealed pack of 6 high capacity Nickel Metal Hydride (NiMH) cells. Unlike NickelCadmium (NiCd) batteries, NiMH batteries have no memory effect, provide a longer operating time, anddo not use toxic metals. The front panel green LED serves both as a power indicator and battery powerand charge status indicator thanks to the PAL� …
  • Philips

    AZ2040

    (8 pages)
    English CONTROLSDIGITAL TUNERTuning to radio stations1Press y to on, then press SOURCE to selectTUNER.– TU is displayed briefly and then the radio stationfrequency, waveband and, if programmed, apreset number are shown. (See 4)2 Press BAND once or more to select yourwaveband.3 Press and hold ∞ or § until the frequency in thedisplay starts running.™ Th …
  • LinQTab

    LQBBL

    (11 pages)
    1 LinQTab LQBBL LQBBL – Boombox User Manual Please read this manual before operating your device, and keep it for future reference. …

Comments, Questions and Opinions: