Manualios.com

Grundig DTR 1760 MICRO Operation & User’s Manual

Grundig DTR 1760 MICRO Manual Online:

4, 1512 votes
Grundig DTR 1760 MICRO User Manual
Grundig DTR 1760 MICRO User Guide
Grundig DTR 1760 MICRO Online Manual

Text of Grundig DTR 1760 MICRO User Guide:

  • Grundig DTR 1760 MICRO, ENGLISH 7 OVERVIEW____________________________________________ The remote control Ǽ Switches the digital receiver to standby, and from standby to the channel last selected. ? Displays programme information. 1 … 0 Select stations. d Switches the sound to mute and on again. i Opens the main menu. Z Exits the current menu level. ǸǷ Adjust the volume. P+ P- Switch channels up and down one by one. OK Calls up the station list. Press A/B to switch between the station list and the favourites list. TXT Switches from television mode to teletext mode. TV-G Calls up the TV guide. TV Switches to TV mode. A/B Switches between the two most recently selected channels. RADIO Switch

  • Grundig DTR 1760 MICRO, 28 You can set a connected video recorder to record a programme. A total of 8 recording timers are available. 1 Press » i« to open the main menu. 2 In the main menu, select »Timer« with »P-« or »P+« and press »OK« to confirm. 3 Press »P-« or »P+« to select the timer position (---) and press »OK« to confirm. 4 Select »Station« with »P-« or »P+« and press »OK« to confirm. 5 Press »P-« or »P+« to select the station from the list and press »OK« to confirm. 6 Select the month with » Ǹ « or » Ƿ « and press »OK« to confirm. 7 Press » Ǹ « or » Ƿ « to select the day and press »OK« t

  • Grundig DTR 1760 MICRO, 38 Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European coun- tries. However, the mains plug and socket system for the UK differs from many European countries. This appliance has been supplied with a fitted, non-removable, approved converter plug for use in the UK. This converter plug is fitted with a 5A rated fuse. In case this appliance is supplied with a moulded 2-pin Euro plug only, which is unsuitable for UK operation,

  • Grundig DTR 1760 MICRO, 6 The digital receiver RF Out HF output for connecting an HF cable to the antenna socket of the television or DVD recorder. RF In Socket for the indoor or outdoor antenna. IR Connection socket for the infrared receiver. 12 V Ó Connection socket for the mains adapter supplied. EURO AV Euro AV (output) plug for the television. The infrared receiver The infrared receiver receives the infrared signals of the remote control and forwards the commands by wire to the receiver. Position the infrared receiver so that it can receive the remote control commands. When you switch on from standby, the receiver switches

  • ENGLISH 11 Searching for channels The automatic search looks for receivable channels among the available bouquets of digital stations. 1 Press » Ǽ« to switch on the digital receiver. – The »Erstinstallation« (Initial installation) page appears when the device is first switched on. 2 Press »OK« to start initial installation. 3 Select your language using » Ǹ « or �

  • Grundig DTR 1760 MICRO, 24 SETTINGS ______________________________________________ Stereo/two channel, mono If the device receives two-channel sound programmes, e.g. a film with the original sound on sound channel B (display: »Mono left channel«) and the dubbed version on sound channel A (display: »Mono right channel«), you can select the sound channel you want to hear. 1 Select »Audio Format« with »P-« or »P+«. 2 Select the television sound with » Ǹ « or » Ƿ «. Sorting channel lists The channel order can be from A to Z, Z to A or according to broad- casters. 1 Select »

  • 14 Filtering channels in the channel list You can select channels in the channel list according to several criteria: Channels – all stations which are free to air or encrypted, are dis- played in the channel list. Filter by – it can filter according to networks or providers. Sorting – the order can be from A to Z, Z to A or using their numbers. 1 Press » i« to open the main menu. – T

  • Grundig DTR 1760 MICRO, 22 SETTINGS ______________________________________________ Menu settings 1 Press »i« to open the main menu. – The main menu is displayed. 2 Select »Box Settings« by pressing »P+« or »P-« and press »OK« to confirm. – The »Box Settings« menu appears. 3 Select »Menu Settings« by pressing »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. Info banner display duration You can determine how long the info banner is displayed when you switch stations. Sele

  • Grundig DTR 1760 MICRO, 30 Changing remote control levels If you are operating two digital receivers with the TP 766 S remote control, you must enter a separate remote control level for each digital receiver. Changing to remote control level 2 1 Press »DR« and »Ǽ« at the same time for about five seconds until “Alter Remote Control code to level 2?” appears. Note: If you do not want to change over to remote control level 2, press »Z« to quit the menu. 2 Press and hold down »DR« and press »OK« to confirm. – If you now want to use the digital receiver with the second remote control level, you must first press and hold down »DR« while

  • Grundig DTR 1760 MICRO, ENGLISH 25 Automatic channel search The automatic search looks for receivable channel s among the available bouquets of digital channels. 1 Press » i« to open the main menu. 2 In the main menu, select »Search for Channels« with »P-« or »P+« and press »OK« to confirm. Note: You only need to change the antenna settings if the antenna type (passive, active) has changed. 3 Select »Automatic Search« with »P-« or »P+« and press »OK« to confirm. Note: You can retain the values for the start and end frequency. Select the »All« option in »Channels to search for« if you would also like to receive encoded chann

  • Grundig DTR 1760 MICRO, 32 Installing on the GRUNDIG television set 1 Switch on the television. 2 Open the »EASY DIALOG« menu by pressing » i«. 3 Select »Installation« with »P+« or »P-« and press »OK« to confirm. 4 Select »Devices« with »P+« or »P-« and press »OK« to con- firm. 5 Select »G-Bus« with »P+« or »P-« and press »OK« to confirm. 6 Select »Picture signal on plug« with »P+« or »P-« and press »OK« to confirm. 7 Select the Euro AV socket with »P+« or »P-« and press »OK« to confirm. 8 Select »Install external module« with »P+« or »P-« and start the installation with »OK«. Note: When the installation has b

  • Grundig DTR 1760 MICRO, ENGLISH 19 Picture settings 1 Press »i« to open the main menu. – The main menu is displayed. 2 Select »Box Settings« by pressing »P+« or »P-« and press »OK« to confirm. – The »Box Settings« menu appears. 3 Select »Video Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. Selecting the television picture format If you have a 16:9 format television or flat screen, select the »16:9/Widescreen TV« setting. If you have a 4:3 format television or flat sc

  • Grundig DTR 1760 MICRO, ENGLISH 5 SET-UP AND SAFETY___________________________ To ensure that this high quality, easy-to-use digital receiver gives you lasting entertainment and enjoyment, please note the following information. This digital receiver is designed to receive, record and play back video and audio signals. Any other use is expressly prohibited. When setting up the device, make sure the mains plug is easily accessible. If the digital receiver is subject to a sudden change in temperature, for example when brought in from the cold to a warm room, let it stand for at least two hours before you connect it to the mains supply. Do not expose the digital r

  • Grundig DTR 1760 MICRO, 2 CONTENTS____________________________________________ 4 General information 4 Packing contents 4 Receiving digital stations 4 Special features of your digital receiver 5 Set-up and safety 6-7 Overview 6 The digital receiver 6 The infrared receiver 7 The remote control 8-9 Connection and preparation 8 Connecting the antenna 8 Connecting the television 8 Connecting the infrared receiver 9 Connecting the mains adapter 9 Inserting batteries in the remote control 10-14 Basic settings 10 The menu 11 Searching for channels 12-13 Creating and editing favourite lists 14 Filtering channels in the channel list 15-17 Basic functions 15 Switching on

  • Grundig DTR 1760 MICRO, 10 The menu This digital receiver has a very comprehensive, user-friendly menu system. The menu is displayed on the television screen. The digital receiver responds to many functions which you select on the remote control with informative menus and icons on the televi- sion screen. It enables you to select many different settings and contains infor- mation on using your digital receiver. The menu contains the most important controls for your digital receiver. Its menu system controls the dialogue between you and the digital receiver. Press »i« to open the main menu. Press »P-« or »P+« to n

  • ENGLISH 3 CONTENTS____________________________________________ 28 Timer functions 29-30 Special settings 29 Resetting the receiver to its original state 29 Updating the digital receiver software 30 Changing remote control levels 31-34 Upgrading the television 31 Connecting the GRUNDIG television with G2 chassis (Digi 200) 32 Installing on the GRUNDIG televisi

  • Grundig DTR 1760 MICRO, 20 Teletext With this function you can select whether teletext should be dis- played on the receiver of the television. 1 Select »Teletext« with »P-« or »P+«. 2 Press » Ǹ « or » Ƿ « to adjust the setting. Selecting the standard setting You can reset the screen settings back to the default settings (factory settings) with this function. 1 Select »Restore Default Settings« with »P-« or »P+« and press »OK« to confirm. Ending the settings 1 Press »i« to finish the setting. Language settings 1 Press »i« to open the main menu. – The main menu is displayed. 2 Select »Box Settings« by pressing »P+« or »P-« and pres

  • Grundig DTR 1760 MICRO, ENGLISH 13 BASIC SETTINGS __________________________________ Moving channels in the favourite list 1 Press »A/B« to switch to the list of favourites. 2 Select the station to be moved with »P-« or »P+« and press »OK« to confirm. – The name of the channel appears. 3 Press »P-« or »P+« to select the preset. 4 Press »OK« to move the channel. 5 Press »i« and then »OK« to save the settings. Note: If you do not want to save the setting, press » Ǹ « or » Ƿ « to select the »No« button and confirm with »OK«. 6 Press »i« to conclude the setting. Deleting channels in the favourite list 1 Press »A/B« to switch to the list of favourites

  • 18 Teletext 1 Select the television station whose teletext pages you want to see. 2 Press »TXT« to call up teletext. – After a short time, teletext page 100 appears on the television screen. Note: You may have to press »OK« so that teletext appears. 3 Select the teletext page with »1 … 0« or one of the coloured buttons. 4 Scrolling text pages: Press »P-« to g

  • Grundig DTR 1760 MICRO, ENGLISH 29 Resetting the receiver to its original state This function enables you to delete the station lists and all custom settings. 1 Press » i« to open the main menu. 2 In the main menu, select »Box Settings« with »P-« or »P+« and press »OK« to confirm. 3 Select »Restore Factory Settings« with »P-« or »P+« and press »OK« to confirm. 4 Press » Ǹ « or » Ƿ « to select »Yes« and press »OK« to confirm. – The receiver switches itself off and then on again. – The »Initial install

  • Grundig DTR 1760 MICRO, ENGLISH 15 Switching on and off 1 Press »Ǽ« to switch on the digital receiver from standby mode. – The mode indicator lights up green. 2 Press » Ǽ« to switch the digital receiver to standby mode. – The indicator lights up red. Mode selection You can choose between TV and radio modes. 1 Press » « or » « to select the mode. Selecting preset channels 1 Move up and down the channels by pressing »P+« or »P-« as required. 2 Enter single-digit or multi-digit preset channel numbers by pressing »1 ..

  • ENGLISH 17 TV guide The electronic TV guide offers an overview of all programmes that will be broadcast in the next week on the current station. The option depends on the broadcaster. 1 Press »TV-G« to view the station information. – All today’s programmes are shown. Notes: Not all stations supply a detailed TV guide. Many broadcasters supply the daily programme but n

  • Grundig DTR 1760 MICRO, ENGLISH 35 Displaying station reception properties 1 Press »i« to open the main menu. 2 In the main menu, select »Technical Information« with »P-« or »P+« and press »OK« to confirm. 3 Select »Channel Information« with »P-« or »P+« and press »OK« to confirm. – The »Channel Information« menu appears. Notes: The signal strength not only depends on the settings of your receiver unit, but also on the channel which is currently active. Remember this when aligning your antenna using the signal level display. 4 Press »i« to quit the menu. Displaying d

Related Products and Documents (Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Wisdom Sage L75 Owner's manual wisdom/sage-l75-2VM.pdf 23 May 2023 30 3.34 Mb
2 Vizio VP322 HDTV10A Service manual vizio/vp322-hdtv10a-EXO.pdf 16 Nov 2023 24 2.76 Mb
3 Frigidaire GLWS1649AS4 Operating instructions frigidaire/glws1649as4-E21.pdf 31 Aug 2023 2 0.04 Mb
4 JVC UX-S1 Instructions manual jvc/ux-s1-GWU.pdf 27 Sep 2023 103
5 Desa VTD-18NV-JHB Owner's operation and installation manual desa/vtd-18nv-jhb-MA6.pdf 21 Nov 2023 20 1.42 Mb
6 Numark ICDX Reference manual numark/icdx-2T7.pdf 30 Jan 2024 64

Similar Resources:

  • Philips

    LX600

    (2 pages)
    LX600Digital Receiver with 5 satellite speakers & subwooferTotal immersion in movies and musicMulti-channel Super Audio CD preparedSuperb audio performance••6-channel full digital Class D™ Amplifier•Dolby Digital 5.1 and Dolby Pro Logic II•Conical Dome Tweeters for a high frequency responseQuick, clean and easy set-up•Color coded speaker conn …
  • Icom

    IC-R2500

    (80 pages)
    INSTRUCTION MANUALiR2500COMMUNICATION RECEIVERThis device complies with Part 15 of the FCC rules. Operation is sub-ject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. …
  • Sony

    STR-DB930 - Fm Stereo/fm-am Receiver

    (1 pages)
    STR-DB930DESCRIPTION:DIMENSIONS(WHD):WEIGHT:POWERREQUIREMENTS:POWERCONSUMPTION:Dolby Digital Receiver17" x 6 1/4" x 14 " Approx. 30 lbs120V60H290WattsSony Electronics Inc • Consumer Integrated Systems • Park Ridge, New Jersey 07656 • FAX (201) 930-7891Features and specifications subject to change without notice. • Non-metric …
  • Parker

    890

    (30 pages)
    890 QuickStart Manual890SD (Standalone) DrivesFrames G, H & JHA471391U000 Issue 6aerospaceclimate controlelectromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shieldingThe full Product Manual is available on line at www.parker.com/ssdENGINEERING YOUR SUCCESS. …
  • starsat

    SR-X1000HD Premium

    (37 pages)
    NXP HD I 1 Content Safety Precaution ...........................................................................................2 1. Reference 1.1 General Features .............................................................................3 1.2 Accessories .....................................................................................4 2. …
  • PVI

    VuMATRIX 1K IP PRO Series

    (3 pages)
    Applies to: VMX-1K-TX-IP-PRO 0649070901604 - VuMATRIX 1080p transmitter over 1gigabit ip PRO model VMX-1K-RX-IP-PRO 0649070901611 - VuMATRIX 1080p receiver over 1gigabit ip PRO model NETWORK CONFIGURATION: 1. If you are using a MANAGED GIGABIT LAYER2 and above switch, please configure the following: a. LAYER 2 IGMP SNOOPING = ON b. LAYER 2 DROP AL …

Comments, Questions and Opinions: