Manualios.com

Panasonic Toughbook CF-P1P3CDG6M Operating Instructions Manual

  • Toughbook CF-P1P3CDG6M PDA
  • maK68Lu1FD6Ew
  • Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 52

Panasonic Toughbook CF-P1P3CDG6M Manual Online:

4.65, 1211 votes
Panasonic Toughbook CF-P1P3CDG6M User Manual
Panasonic Toughbook CF-P1P3CDG6M User Guide
Panasonic Toughbook CF-P1P3CDG6M Online Manual

Text of Panasonic Toughbook CF-P1P3CDG6M User Guide:

  • Panasonic Toughbook CF-P1P3CDG6M, 50 YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONI- CALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EX- CEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMI- NATED. A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the

  • Panasonic Toughbook CF-P1P3CDG6M, 13 2 Connect your computer to a power outlet. When the AC adaptor is connected to the computer, charg- ing begins automatically. Charging Time: Approx. 3 hours This computer is equipped with a memory backup battery which automatically charges from the fully-charged lithium- ion battery (main battery). This backup battery retains data in memory when the lithium-ion battery is removed, and takes 36 hours to charge when you first use this computer. 1 Install the battery pack. (1) Power off your computer and turn it over. (2) Press position (A) to depress the battery pack cover and then slide the latch, and remove the battery pack cover.

  • Panasonic Toughbook CF-P1P3CDG6M, 15 3 Turn your computer on (1) Using the provided stylus, push the center of the reset switch straight in for 1 second. If the DC-IN Jack's cover makes it difficult to push the reset switch, push the cover in a little as you push the switch. (2) Tap the screen to set up your Pocket PC. The Windows* 1 alignment screen is displayed. * 1 This computer uses Microsoft ® Windows ® Mobile TM 2003 software for Pocket PC. (3) Align the touchscreen. (For alignment, tapping operations are required. For information on tapping, refer to page 20.) "+" is displayed in the center, upper left, lower left, lower right, and upper right portions of the scree

  • 30 Remove the battery pack (1) Turn off your computer and wait for 30 seconds. (2) Turn your computer over. (3) Press position (A) to depress the battery pack cover and then slide the latch, and remove the battery pack cover. (4) Remove the battery in the direction shown in the figure. Latch Battery Pack Cover (A) NOTE If the attached strap makes it difficult to remove

  • Panasonic Toughbook CF-P1P3CDG6M, 36 Connecting to Your Computer Use Microsoft ® ActiveSync ® to synchronize a host computer and CF-P1 information, to transfer files between a host computer and CF-P1, or to backup and restore data. The following methods can be used to connect the CF-P1 with a host computer. The use of a Serial Cable or USB Cable. The use of the infrared communication port. Use an RS-232C Cable or a USB Adaptor Cable to connect CF-P1 with a peripheral. Installing ActiveSync ® 1 Set the Companion CD into the host computer. The opening screen is displayed automatically. • When the opening screen is not automatic

  • Panasonic Toughbook CF-P1P3CDG6M, 24 Entering Information Q W E R T Y U I O P L J K H G F D S Z X C V B N M áü SPACE NUM CAP 1 2 3 4 5 6 7 8 9 0 / + = ? $ ! , . ) ( : ' " @ - Mode Key A symbol or number on the key top is input by pressing the Mode key (the numeric key lock indicator goes on) followed by the corresponding alphabet key. Each Mode key press works for the input of only one symbol or number. This is convenient when using one hand to input sentences including symbols/numbers. Example: To input “abc.def.”, press the keys in the following order. A B C M D

  • Panasonic Toughbook CF-P1P3CDG6M, 14 First-time Operation NOTE When the backup battery or main battery becomes low, some alert messages and icons will be displayed. ( page 17) Do not remove the main battery before the backup battery is fully charged. Other- wise, data in RAM will be lost. Take care to ensure that the remaining power in the main battery and the backup battery never discharges completely. When any remaining power discharges completely, the computer will no longer function properly, and the computer powers off automatically. Connect the AC adap- tor and recharge the battery. If the computer is left for 72 hours or more without recharging, the computer may be fully reset. When the comput

  • Panasonic Toughbook CF-P1P3CDG6M, 23 Entering Information You can use the following options to enter information: Use the keyboard to input the number, character* 1 or symbol* 1 shown on the key top. Use the input panel to input typed text, either by using the soft keyboard or other input method. Write directly on the screen.* 2 Draw pictures on the screen.* 2 Speak into the internal microphone to record a message.* 2 Use Microsoft ® ActiveSync ® to synchronize or copy information from a host computer to CF-P1. For more information on Microsoft ® ActiveSync ® , see ActiveSync Help on the host computer ( page 36). * 1 Only for the CF-P1P3 series. * 2 For more

  • Panasonic Toughbook CF-P1P3CDG6M, 5 How to replace the fuse Open the fuse compartment with a screwdriver and replace the fuse. Warnings This equipment is not designed for connection to an IT power system. (An IT system is a system having no direct connections between live parts and Earth; the exposed- conducive-parts of the electrical installation are earthed. An IT system is not permitted where the computer is directly connected to public supply systems in the U.K.) Disconnect the mains plug from the supply socket when the computer is not in use. This equipment is produced to BS800/1983. ---------------------------------------------------------------------- Comp

  • 35 You can connect to Internet service provider (ISP), and use the connection to send and re- ceive e-mail messages and view Web or WAP pages. Getting Connected The settings will vary for different network environments. Ask your system administrator or the person in charge of the network and make settings using the followings. (1)Tap - [Settings] - [Connections] tab - [Connections] in order.

  • Panasonic Toughbook CF-P1P3CDG6M, 41 Certificates Add and delete personal certificates and root certificates. Clear Type Tuner Make a text clear by moving the slider. Clock Time/date settings and alarm settings. CPU Clock Change the operating speed of the processor. Memory Computer memory assignment possible (assignment of memory for data memory and memory for program execution). Display of total storage card memory if it is installed. Activate or stop the running programs. Option Devices Add a check mark in a box to activate CF card and RF module when the power is off* 1, and make Wireless LAN card* 1 on

  • 9 3 4 What’s in the Box? Make sure the parts shown in the figure have been supplied. If any of these items is missing or is not working properly, contact Panasonic Technical Support. Make sure the provided stylus has been stored to the computer ( page 20). Attaching the Strap The strap has been designed to carry only the weight of the computer. Therefore, be sure that t

  • © 2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan SS1103-2064 DFQX5434YB Panasonic Computer Solution Company, 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 PANASONIC U.K.LTD (PUK) WILLOUGHBY ROAD,BRACKNELL,BERKSHIRE, RG12 4FP

  • Panasonic Toughbook CF-P1P3CDG6M, 18 Starting Up/Shutting Down Today Screen You’ll see the Today screen when you turn on the computer for the first time each day (or after 4 hours of inactivity* 1 ). You can also display it by tapping - [Today]. On the Today screen, you can see at a glance important information for the day. * 1 To change the setting, tap - [Settings] - [Personal] tab - [Today] - [Items] tab. Tap to switch to a program. Tap to create a new item. Tap to change date and time. Tap to open an item. Your day at a glance. Displayed when synchronizing with a host computer using Microsoft ® ActiveSync ® . Tap to view connection status.

  • 12 Connecting/Removing the Cradle Connecting the Cradle Connect the cradle after removing the AC adaptor from the computer and closing the DC-IN Jack Cover. Removing the Cradle 1 Press the release lever. 2 While firmly holding the cradle and pressing down on the release lever with one hand, lift the computer up with the other hand. The AC adaptor is con- nected to the position shown by th

  • Panasonic Toughbook CF-P1P3CDG6M, 48 CF-P1P3 series CF-P1P1 series Intel ® XScale ® PXA263 400MHz Instruction Cache Memory: 32 KB Data Cache Memory: 32 KB 64 MB (Max 128 MB)/ 64 MB (Flash) 256 KB 3.5 type (Reflective color TFT with front light* 1 ) 65536 colors (240 x 320 dots) Touchscreen, Cursor Control One Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA SD memory card/MultiMedia Card IrDA 1.2 low power compliant, 115.2 kbps data transmission speed Miniature jack, 2.5 DIA Monaural Speaker Built-in for supporting as Mobile Phone 16-bit Stereo ADC/DAC, Sample Rate 48 kHz Li-i

  • Panasonic Toughbook CF-P1P3CDG6M, 16 Starting Up (from the second time) Lightly press the power switch once. A program or file that was previously displayed appears on your screen. Starting Up/Shutting Down Power Switch Power Switch To turn the backlights on/off: Press the power switch until the LCD backlight and keyboard backlight go on/off and release the switch. At the time of purchase, the setting of the keyboard backlight is “off”. To turn the keyboard backlight on, refer to page 22. When the backlight is on, more power is consumed, and the shortening of the operating time is accelerated. NOTE ON Lightly press the power switch (for less than 0.5 seconds). OFF

  • 34 Auto Restore 1 Full reset CF-P1( page 43 step (1) - (4)). [Panasonic Backup] screen will be displayed. 2 Select a file for restore, and tap [OK]. If a password has been set, a message will be displayed. Enter the password and press [OK]. Restore will start. The progress screen will be displayed. When the re- store is complete, CF-P1 resets automatically. Panasonic Backup

  • Panasonic Toughbook CF-P1P3CDG6M, 11 To adjust the volume, tap - [Settings] - [Per- sonal] tab - [Sounds & Notifications] - [Volume] tab. Use this connector to connect a headset or a 3.5 DIA plug adaptor ( page 12). Audio output and voice call from the internal speaker are dis- abled when the headset or the 3.5 DIA plug adap- tor is connected. ( pages 13 and 30) Set the computer into the cradle (included) ( next page). Or, you can connect the com- puter directly to the computer using the proper cable ( page 38). Cursor Control Using the cursor control, the

  • Panasonic Toughbook CF-P1P3CDG6M, 17 The Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the input panel button. or may be displayed depending on the program that is running. Status Icon ( below) New Button Menu Names Buttons Input Panel Button (Example for [Notes]) Tap to quickly select a program you have recently used. Tap to select a program. Tap to see additional programs. Tap to customize

  • Panasonic Toughbook CF-P1P3CDG6M, 26 Entering Information Using the Numeric Keypad Type Keyboard <For the CF-P1P1 series> Press a key to input the number shown on the key top. The keys can also be used as function keys. (See "PF key" below.) PF Key: When is pressed and the PF key indicator is turned on (function key mode), the functions assigned to the each number key are activated when the corresponding keys are pressed. (The functions assigned to the number keys differently depending on the application.) - To use the function key mode only once: Press once, then press a number key. (You can also press the number key while pressing .) Once the number key is pressed, indica

  • Panasonic Toughbook CF-P1P3CDG6M, 44 Dealing with Problems Troubleshooting Starting Up Check to see if a fully charged battery pack is properly installed. The power does not go on unless the AC adaptor is con- nected: The battery level is too low. Charge the battery with the AC adaptor. (Make sure that the battery never discharges completely and that it is charged periodically.) Push the reset switch to restart CF-P1. Slide the latch to lock the battery pack cover all the way to the left. If the power does not turn on when the above operations are performed, the battery pack must be replaced. You can set the date and time through [Clock] in - [Settings] - [System] tab. If you cont

  • Panasonic Toughbook CF-P1P3CDG6M, 47 Maintenance LCD Avoid using water when cleaning the panel. Ingredients included in water may leave residue and reduce readability of the screen. Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause the computer to work improperly or be damaged. <When cleaning dust/dirt> Avoid rubbing off dust/dirt with cloth since it may leave scrat

  • Panasonic Toughbook CF-P1P3CDG6M, 38 Connecting to Your Computer When Connecting the CF-P1 Directly with a Computer Use a Connector Protector (optional: CF-VCCP11U) to connect CF-P1 with an external device firmly. USB Autosync Cable Serial Autosync Cable Expansion Connector of the CF-P1 or Removing CAUTION To ensure that synchronization functions properly, install Microsoft ® ActiveSync ® 3.7 before connecting CF-P1 and the host computer for the first time. Turn off the CF-P1, the connected computer, and all connected peripherals before connecting or disconnecting the cable.

  • Panasonic Toughbook CF-P1P3CDG6M, 51 Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. ©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for dama

  • Panasonic Toughbook CF-P1P3CDG6M, 37 To change the synchronization settings, tap, in order, - [ActiveSync] - [Tools] - [Options...]. Be sure to disconnect the cable when changing the synchronization set- tings. Disconnect and connect the cable again if communications do not start. For information about the Microsoft ® ActiveSync ® , refer to the Microsoft ® ActiveSync ® Help. NOTE CAUTION While performing communications, avoid the following: • Connect/disconnect the cable. • Remove the computer from the cradle. • Turn on/off the CF-P1 and the host computer. When adding a check ma

  • Panasonic Toughbook CF-P1P3CDG6M, Operation Starting Up/Shutting Down ................................... 16 LCD (Touchscreen) .............................................. 20 Backlight Setting................................................... 22 Entering Information ............................................. 23 Program Buttons .................................................. 28 Battery Power ....................................................... 29 SD Memory Card/MultiMedia Card....................... 31 Panasonic Backup..........

  • Panasonic Toughbook CF-P1P3CDG6M, 46 Sounds Program Buttons When the program display of a start menu is changed after assigning a program, if you press a button, that pro- gram may not start. In that case, tap - [Settings] - [System] tab - [Panasonic Settings] - [Buttons] tab, and re-assign the program. The program assigned to the button does not start. Character Input < Only for CF-P1P1 series > Characters can be input using the input panel. ( page 23) Entering characters Quality of recorded sound is poor. Play sound is recorded even though the Mix playsound checkmark is off. Nois

Related Products and Documents (PDA):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Topcom Butler 2505 C Operation & user’s manual topcom/butler-2505-c-N44.pdf 28 Feb 2023 90 0.92 Mb
2 Samsung WS32Z108R Owner's instructions manual samsung/ws32z108r-6K5.pdf 10 Jul 2023 64
3 Nokia 6670 - Smartphone 8 MB Quick start manual nokia/6670-smartphone-8-mb-R58.pdf 29 Mar 2023 2
4 Glow-worm Envirosorb2 7 Installation and servicing glow-worm/envirosorb2-7-P36.pdf 03 Apr 2023 44
5 Samsung 172T Operation & user’s manual samsung/172t-D94.pdf 15 Dec 2023 69 4.24 Mb
6 Panasonic UF-8000 Service handbook panasonic/uf-8000-URW.pdf 17 Feb 2023 187

Similar Resources:

  • Compaq

    108164-003 - ProLiant - 800

    (23 pages)
    WHITE PAPER1................................................................................................................................................................ECG007.0897September 1997Prepared by InternetSolutions EngineeringCompaq ComputerCorporationCONTENTSA message fromPaul Smart, VicePresident ofResearch andDevelopment,CollaborationServices. …
  • Royal

    Extreme 2

    (19 pages)
    MM79 010710 Slimline standard Mk 2 Multiflue User, Installation & Servicing Instructions This appliance is for use on PROPANE GAS (G31) ONLY at a supply pressure of 37mbar Please hand this booklet to the user and advise to keep in a safe place G.C. No 32-187-41B Important Notice: Before disposal of the outer pac …
  • Intermec

    EasyCoder PF2i

    (4 pages)
    PM/PF/PX Printer Compliance InsertFor Users in the United States and CanadaThe users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance …
  • Motorola

    A1000

    (122 pages)
    Welcome - 1WelcomeWelcome to the world of Motorola digital wireless communications!We are pleased that you have chosen the Motorola A1000multimedia handset.Status LightTouchscreenEarpieceNavigation KeyPush center button left, right, up, or down to move through items. Press center button to select highlighted item.End KeyPress and release to end calls and to …
  • Intermec

    CK60

    (2 pages)
    CK60 and PB42 Battery InstructionsCK60 and PB42 Battery Instructions*943-072-001*P/N 943-072-001The Model AB11 battery (P/N 318-015-002) is a rechargeable 17.3 Watt-hour, 7.2V, lithium-ion (Li-ion) battery.You need to fully charge the battery before using it in your CK60 mobile computer or PB42 portable receipt printer. A fully discharged battery charges in …
  • Casio

    PV-S250

    (13 pages)
    127Chapter11Data CommunicationData communications capabilities let you transfer data between two CASIO PVUnits, between a PV Unit and a BN-10/BN-20 Unit, or between a PV Unit and aBN-10A/BN-20A/BN-40A Unit. You can also receive data from a CASIO SF,CSF, or NX Series Unit, and communicate with a personal computer using PCsync for Windows.• See the manual th …

Comments, Questions and Opinions: