Panasonic TX-47P600X Operating Instructions Manual

Text of Panasonic TX-47P600X User Guide:

• Panasonic TX-47P600X, 41 Before you call for service, determine the symptoms and make a few simple checks as shown below. Troubleshooting Snowy Picture Multiple Image Interference Normal Picture No Picture No Colour Scrambled Coloured Patches No Colour Noisy Sound Noisy Sound Noisy Sound Normal Sound Normal Sound Normal Sound No Sound No Sound Normal or Weak Sound Symptoms Picture Sound Checks Aerial Location, direction or Connections Aerial Location, direction or Connections Electrical Appliances Cars/Motorcycles Fluorescent Lamps Volume (Refer to page 12, 13) (Check whether the mute function has been activated on the Remote Control.) Not plugged into AC outlet Not switched

• Panasonic TX-47P600X, 39 Advanced Remoto Control Operation Stereo Bilingual Sound Selection Type of broadcast Mode Indicator Type of broadcast Mode Indicator Regular broadcast (Standard Audio) NICAM STEREO STEREO Mode Indicator NICAM .......Used in New Zealand, Malaysia, Thailand, Indonesia etc. I No Indicator Regular broadcast (Standard Audio) No Indicator II I I II I II Regular + NICAM MONO I (MAIN I ) NICAM DUAL MONO (MAIN I / SUB II ) BILINGUAL or DUAL MONO: MAIN I / SUB II A2(German) .......Used in Australia, Malaysia,Singapore, China. Audio Signal

• Panasonic TX-47P600X, 18 Convergence Adjustment Convergence2 Adjustment for RED and BLUE This function adjust the convergence of the side part of the screen. Press to select the CONVERGENCE2. Press to access to the function. CONVERGENCE 2 CONVERGENCE 1 ACCESS SELECT ACCESS RETURN TV / AV - EXIT N-RED BLUE TV / AV - EXIT 1 2 3 4 6 7 89 N-BLUE RED TV / AV - EXIT 2 3 4 6 7 8 9 1 N-BLUE RED TV / AV - EXIT 2 3 4 6 7 89 1 N-BLUE RED TV / AV - EXIT 2 3 4 6 7 89 ADJUST ADJUST Press the Number button on the Remote Control to select the position which you would like to adjust. Remote control (Example) Posit

• Panasonic TX-47P600X, 10 Connections Connect VCRs and other peripheral equipment Notes: • When an S Video cable is connected to the S Video terminal, the corresponding Video input will be switched off and the signal from the S Video input will be used. • When a Monaural VCR is used, connect the Monaural Audio cable to the Audio “L” (Left) terminal. • Select the desired AV input position by pressing the TV/AV button. (Refer to page 13) • Input 3 is located on the front of the unit. • The AV2 and AV4 audio input terminals serve as the audio input terminal for both the Video input and the DVD input. How to connect the “AV1, 2, 3 or 4” Input Terminals (VHS VCR) VIDEO AUD

• Panasonic TX-47P600X, 29 Picture Adjustment Set the overall colour tone of the picture.C. TEMP (Colour Temperature) P-NR (Picture Noise Reduction) AI (Artificial intelligence) SCAN MODE Press to switch between modes STANDARD MENU CONTRAST BRIGHTNESS COLOUR SHARPNESS C. TEMP STANDARD PICTURE NTSC-TINT COOLWARMSTANDARD Automatically reduces undesired picture noise. Automatically analyses the incoming picture and processes it to give improved contrast and optimum depth of field. Choose the screen refresh method: Press to switch between modes WEAK STRONG

• Panasonic TX-47P600X, 40 Manufacturer setting Advanced Remoto Control Operation Remote Control Operation is possible for the VCR’s, LD’s and DVD’s of the various manufacturers. After completion of setting, execute the various operations . While pressing the VCR / LD / DVD Power button, press the manufacturer code (enter the two digit code), and press the VCR / LD / DVD Stop button. Note: After setting, execute operation confirmation. If there is no operation, set a different code. (1) The respective VCR / LD / DVD manufacturer code is cancelled when battery has been exchanged. Please set it again. (2) Depending on the model, operation of VCR’s, LD’s or DVD’s of the manufacturers listed abov

• 3 Table of contents Table of contents Warnings and Cautions ................................................................. 4 Before Operating This Set ............................................................. 6 How to Use This Manual ........................................................................ 6 Safety Precaution / Securing the casters ................

• Panasonic TX-47P600X, Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Wide Projection television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the Model Number and Serial Number of your set in the space provided on the rear cover of these Instructions. Visit our Panasonic Web Site http://www.panasonic.co.jp/global

• Panasonic TX-47P600X, 5 Warnings and Cautions When inserting batteries, ensure that the polarities (positive and negative) are correctly aligned. Insert as shown on remote control. If inserted incorrectly, battery fluid may leak, and fire, injury, or damage to surrounding components may result. Do not mix new and old batteries. Use only the specified batteries. Failure to follow this precaution may result in leakage of battery fluid. Fire, injury, or damage to surrounding components may also result. Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 10 cm ( ) is left all around this unit even when it is placed inside

• Panasonic TX-47P600X, 28 Picture Adjustment 1 Press to display the Picture Menu. 2 Press to select the desired function. Press to adjust or change the function. 3 Press to go back to watching TV. PICTURE TV/AV Picture menu mode will be memorized for each TV, AV1, AV2, AV3 and AV4 mode. • You can change the level of each Item (CONTRAST, BRIGHTNESS, COLOUR, SHARPNESS and NTSC-TINT) for each Picture Menu (DYNAMIC, STANDARD and SOFT). Notes: • When set to Multi PIP mode, the main and sub pictures are both adjusted simultaneously. • When t

• Panasonic TX-47P600X, 30 Sound Adjustment 1 Press to display the Sound Menu. 2 Press to select the desired function. Press to adjust or change the function. 3 Press to go back to watching TV. SOUND TV/AV Note: Some features are only available with the Surround feature switched off. Press SURROUND to switch between On and Off. Sound menu mode will be memorized for each TV, AV1, AV2, AV3 and AV4 mode. • You can change the level of each Item (VOLUME, BASS, TREBLE, BALANCE, HEADPHONE VOL and SUB HEADPHONE) for each Sound Menu (DYNAMIC, STANDARD and SOFT). MENU Sound Menu Function DYNAMIC STANDARD SOFT Amplifies the Low frequencies an

• 19 1 Press to display the SETUP MENU. Press to select the TUNING MENU. Press to display the TUNING MENU. SET UP TELETEXT OFF TIMER FLICKER REDUC. STROBE CH COLOUR SET TEXT SELECT ENGLISH VCR / GAME OFF OFF DYNAMIC FASTEXT SETUP MENU TUNING MENU PICTURE SHIFT CHILD LOCK CONVERGENCE LANGUAGE OFF OFF ACCESS SETUP MENU ENGLISH Press to select the “CH SELECT (Channel Select) ” M

• Panasonic TX-47P600X, 24 Fine Tuning Under normal reception conditions this function is not required or necessary. However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality. 1 SYS SELECT CH SELECT AUTO TUNE MANUAL TUNE FINE TUNE SKIP SOUND SYS 6. 0MHz COLOUR SYS AUTO OFF JAPAN POSITION TUNING MENU Press to select the FINE TUNE. Press until the clear picture is received. 3 Press to exit from the FINE TUNE. TV/AV 2 STR Press to store the FINE TUNE. Th

• 12 TV/AV STR F Volume Adjustment Picture Menu (see page 14, 28) Sound Menu (see page 14, 30) Set up Menu (see page 15, 27) Stereo/Bilingual Sound Selection (see page 39) TV/TEXT Selection (see page 36) 100Hz/PROGRE (see page 29) Surround (see page 30, 31) Aspect Controls (see page 32) Multi P in P Selection (see page 34) Recall VCR/LD/DVD Rewind/Review N

• Panasonic TX-47P600X, 16 Convergence Adjustment mode Prior to adjustment, tune the broadcast signal to the video input signal and operate the set for more than 60 minutes. If the location or direction of the set is changed or moved, the display may be out of alignment. If necessary, carry out the following procedures once with PAL signal and again with the NTSC signal. Convergence Adjustment Vertical centre marker Horizontal centre marker 1 Press to display the Setup Menu. 2 Press to select the “CONVERGENCE”. Press to access to the “CONVERGENCE” menu. SET UP TUNING MENU PICTURE SHIFT CHILD LOCK CONVERGENCE LANGUAGE OFF OFF ACCESS

• 14 N ? LD/DVD REC - VCR STR HELP DISC SIDE A B TV/AV 1 2 3 456 789 0 F.P. INDEX HOLD STILL CH SEARCH PICTURE SOUND SET UP TV/TEXT SURROUND 100Hz/ PROGRE MULTI PIP ASPECT On-Screen menu Display from Remote Control STANDARD MENU CONTRAST BRIGHTNESS COLOUR SHARPNESS C. TEMP STANDARD PICTURE NTSC-TINT AI SCAN MODE AUTO ON PICTURE P - NR AUTO MENU VOLUME BASS TREBLE BALANCE SURROUND SU

• Panasonic TX-47P600X, 26 Sound System Selection (Different region use differing systems) This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme Number, and is not applicable in AV mode . Press to select the “SOUND SYS”. 1 2 Press until the optimum sound is obtained. SYS SELECT CH SELECT AUTO TUNE MANUAL TUNE FINE TUNE SKIP SOUND SYS 6. 0MHz COLOUR SYS AUTO OFF JAPAN POSITION TUNING MENU Sound System Condition. Note: These are different sound broadcast transmission systems applicable to differing countries. The sound system will change as sh

• Panasonic TX-47P600X, 32 Aspect Controls ZOOM 16:9JUST 14:9 S-ZOOM4:3 AUTO 1 2 3 4 5 6 7 8 9 0 F.P. INDEX HOLD STILL CH SEARCH TV/TEXT 100Hz/ PROGRE SURROUND MULTI PIP ASPECT The on screen selector keys (corresponding to the four coloured buttons on the remote control) appear for some Aspect functions and disappear after a few seconds. If you would like to select an operation when the keys are not shown, press ASPECT once more and the keys will reappear. Press to select the different Aspect options. Notes: • Simply press ASPECT to display mode information in the top left of the screen. • 16:9 picture has been used to illustrate all of the aspect modes

• Panasonic TX-47P600X, 33 H POS— H POS + V POS— V POS + S-ZOOM V SIZE— V SIZE + V POS— V POS + ZOOM 4 : 3 JUST 4 : 3 JUST V POS— V POS + 14 : 9 AUTO ExplanationPictureMode 4 : 3 ZOOM 16 : 9 16:9 Signal 4:3 Signal 14 : 9 JUST S-ZOOM 16:9 Signal 4:3 Signal The AUTO position can be set to 4:3 or to JUST. When a wide screen signal is detected at the Video terminal the TV will select the 16:9 aspect ratio. This option will display a standard 4:3 picture without any stretching or compression. There will be vertical gray lines down either side of the picture. S-Zoom displays part of the picture at a greater magnification than the Zoom mode does. The coloured buttons let you

• Panasonic TX-47P600X, 8 S VIDEO TV/AV STR F Sub.Main VIDEO L/MONO AUDIO R AV3 IN S VIDEO VIDEO MONO MONO R L AUDIO VIDEO MONO R L AUDIO P B P R Y DVD [ Y-P B- P R ] P B P R Y DVD [ Y-P B- P R ] AV1 IN AV2 IN AV4 IN MONITOR OUT Location of Controls Controls and Terminals on the TV Item No. Function Refer to Page Item No. Function Refer to Page Main Headphones Jack 9 Sub Headphones Jack 9 AV3 Input Terminals 10 STR 12 Function 12 Volume Down (−) / 12 Volume Up (+) / 12 TV/AV Selection 12 Aerial Terminal (RF In Terminal) 9 Monitor Output Terminals 11 AV1 Input Terminals 10 AV2 Inpu

• Panasonic TX-47P600X, 9 Connecting the Aerial Cable to the RF In Terminal UHF Aerial RF In Terminal Coaxial Aerial Plug VHF Aerial Mixer 75 Ohm Coaxial Cable RF in Terminal Coaxial aerial plug 75 Ohm Coaxial Cable Notes: • To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating plug are required. • If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket and your set. • Your local Television Service

• Panasonic TX-47P600X, 25 Programme Number Skip It is possible to skip Programme Number on which no TV stations are tuned appearing on the screen. The function is only effective when selecting Programme Numbers by pressing the Programme Number Up or Down button either on the TV set or on the Remote control. SYS SELECT CH SELECT AUTO TUNE MANUAL TUNE FINE TUNE SKIP SOUND SYS 6. 0MHz COLOUR SYS AUTO ON JAPAN POSITION TUNING MENU 1 Under the normal viewing condition press to select the Programme Number you’d like to skip. Press to change the mode to “ON”. 3 Press to select the SKIP. 5 Press to exit from the SKIP. TV/AV 4 STR Pre

• Panasonic TX-47P600X, 35 ( ) ( ) ( ) Channel search Press to watch the current programme (displayed centre screen), exiting the feature. (Access Strobe via the Setup menu, see page 27). Takes a series of up to twelve freeze-frame images (one second delay between each image being taken) from the current programme watched. Press to show freeze-frames of the programmes being broadcast on all of the stored channels. These images are displayed in series clockwise around the edge of the screen, starting from the

• Panasonic TX-47P600X, 34 Multi Screen 1 2 3 4 5 6 7 8 9 0 F.P. INDEX HOLD STILL CH SEARCH TV/AV PICTURE SOUND SET UP TV/TEXT 100Hz/ PROGRE SURROUND ASPECT MULTI PIP Multi PIP MULTI PIP Press twice to view two pictures (sub picture in main picture) at the same time. Press MULTI PIP to select the current programme, the picture in picture feature, or the picture and picture feature. The on screen selector keys for the features (corresponding to the four coloured buttons on the remote control) appear and disappear after a few seconds. If you would

• Panasonic TX-47P600X, 38 Press to return to normal TV operation. Sub Coded Page Access SET UP Blue + When Teletext information exceeds more than one page, it may take some time for the automatic changing of the sub pages to reach the sub page you require. It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found. Select the required page number using buttons 0 - 9. If the top of the page indicates that sub pages are being transmitted yet the page does not change, then the number at the top of the page is

• Panasonic TX-47P600X, 36 Four differently coloured subjects are situated at the bottom of the display. To access more information, press the appropriately coloured button. This mode enables fast access to information on the subjects shown. TELE TEXT Teletext features may vary depending on the Broadcasting Companies and are only available when the channel selected is transmitting Teletext. Press to select the current programme, the teletext and the picture or the teletext feature. TV / Teletext mode TV/TEXT PICTURE Press to display the contrast function with a cyan bar. Press to alter th

Related Products and Documents (Projection TV):

Comparable Devices:

Similar Resources:

• Toshiba 62HM15 - 62" Rear Projection TV (2 pages) >>ATSC/QAM Tuners enable the set to receive digital cable-in the-clear signals, as well as digital terrestrial broadcasts.>>CableCARD™ allows for the reception of all applicable digital cable channels without the need of a cable box. This card is supplied by the local Cable MSO.>>Toshiba Advanced Light Engine (TALEN™) is a proprietary l …

• Sony KDS-55A2000 - 55" Grand Wegaâ„¢ Sxrdâ„¢ Rear Projection Hdtv (2 pages) KDS-55A200055" Diagonal SXRD Rear Projection Television Key Features3 SXRD Full HD Resolution (1920 x 1080/0.61” SXRD chip) WEGA Engine™ System Advanced Iris functionATSC Integrated TunerHDMI x 2 inputs for digital connectivity (1080p input)PC Input (D-Sub 15pin)Front Component - HDV Camcorder Connection (1080i) Audio Optical Output (TOS Link)C …

• Philips Magnavox 8P4831C (2 pages) 48" Large Screen Television with Incredible Stereo™(screen size measured diagonally)• MagnaBrite™ Lenses• Wideband video amplifier• Luminance Transience Improvement (LTI)™• Incredible Stereo™• True surround sound• 10-watt dbx®hi-fi stereo sound system• Universal TV/VCR/Cable remote Large Screen Television8P4831C• Smart Window™ …

• Philips 60P8241 (2 pages) 60P8241Large Screen Television60" Large Screen TelevisionDigital comb filterPicture-in-pictureMultipoint digital convergenceComponent video inputIncredible Surround™with dbx®hi-fi stereo soundSmartScreen™(removable protective filter) …

• Samsung HL-R5677W - 56" Rear Projection TV (4 pages) TV/VIDEO• DLP™ (Digital Light Processing) TV• Ultra Slim Bezel, Light-Weight Design– Fits Where Others Won’t™• Digital Cable Ready (DCR) with CableCARD™ • Built-In Analog/Digital Tuner (NTSC/ATSC)• Samsung Cinema Smooth™ 720p Light Engine - Single Panel Digital Micro-Mirror Device (DMD)Design for a Crystal Clear Picture Without AnyPossi …

• Vivitek 51" Micro Display Projection TV (58 pages) 51"51"RPTVwww.vivitekcorp.com51" Micro Display Projection TVUSER GUIDEView of the Digital WorldView of the Digital WorldView of the Digital WorldView of the Digital World …

Comments, Questions and Opinions: